arXiv subjects

Y. I. Joe

Publications and source records attributed to Y. I. Joe.

10 recordsLinked to original sources

arXiv2026

X-ray magnetic circular dichroism and resonant inelastic X-ray scattering explained: role of many-body correlation and valence fluctuations

X-ray magnetic circular dichroism (XMCD) and resonant inelastic X-ray scattering with magnetic circular dichroism (RIXS-MCD) provide unparalleled insights into the electronic and magnetic dynamics of complex materials. However, interpreting their spectra in mixed-valence systems remains challenging due to intricate many-body interactions and enhanced charge fluctuations. In this study, by utilizing the Anderson impurity model with a full consideration of charge transfer (CT), many-body core-valence exchange correlation (CVEC) effects, and Jahn-Teller (JT) distortions, we systematically investigate the XMCD and RIXS-MCD spectra for a prototypical mixed-valence ferromagnet, La$_{0.7}$Sr$_{0.3}$MnO$_3$ film. We demonstrate that simple calculation with limited CT effects fails to capture characteristic substructures observed experimentally. In contrast, an adequate treatment of CT and CVEC effects yields a more consistent description of both XMCD and RIXS-MCD spectra, providing practical guidance for the interpretation of dichroic x-ray spectroscopies in mixed-valence transition-metal oxides. Furthermore, we discuss the role of the JT effect in Mn$^{3+}$ ions in the determination of their spectra.

cond-mat.str-el↗

arXiv2020

On low-energy tail distortions in the detector responsefunction of x-ray microcalorimeter spectrometers

We use narrow spectral lines from the x-ray spectra of various highlycharged ions to measure low-energy tail-like deviations from a Gaussian responsefunction in a microcalorimter x-ray spectrometer with Au absorbers at energiesfrom 650 eV to 3320 eV. We review the literature on low energy tails in othermicrocalorimter x-ray spectrometers and present a model that explains all thereviewed tail fraction measurements. In this model a low energy tail arises fromthe combination of electron escape and energy trapping associated with Bi x-rayabsorbers.

physics.ins-det↗

arXiv2020

Resonant soft x-ray scattering from stripe-ordered La$_{2-x}$Ba$_x$CuO$_4$ detected by a transition edge sensor array detector

Resonant soft x-ray scattering (RSXS) is a leading probe of valence band order in materials best known for detecting charge density wave order in the copper-oxide superconductors. One of the biggest limitations on the RSXS technique is the presence of a severe fluorescence background which, like the RSXS cross section itself, is enhanced under resonant conditions. This background prevents the study of weak signals such as diffuse scattering from glassy or fluctuating order that is spread widely over momentum space. Recent advances in superconducting transition edge sensor (TES) detectors have led to major improvements in energy resolution and detection efficiency in the soft x-ray range. Here, we perform a RSXS study of stripe-ordered La$_{2-x}$Ba$_x$CuO$_4$ at the Cu $L_{3/2}$ edge (932.2 eV) using a TES detector with 1.5 eV resolution, to evaluate its utility for mitigating the fluorescence background problem. We find that, for suitable degree of detuning from the resonance, the TES rejects the fluorescence background, leading to a 5 to 10 times improvement in the statistical quality of the data compared to an equivalent, energy-integrated measurement. We conclude that a TES presents a promising approach to reducing background in RSXS studies and may lead to new discoveries in materials exhibiting valence band order that is fluctuating or glassy.

cond-mat.str-el↗

arXiv2018

A Highly Linear Calibration Metric for TES X-ray Microcalorimeters

Transition-edge sensor X-ray microcalorimeters are usually calibrated empirically, as the most widely-used calibration metric, optimal filtered pulse height (OFPH), in general has an unknown dependance on photon energy, $E_γ$. Because the calibration function can only be measured at specific points where photons of a known energy can be produced, this unknown dependence of OFPH on $E_γ$ leads to calibration errors and the need for time-intensive calibration measurements and analysis. A calibration metric that is nearly linear as a function of $E_γ$ could help alleviate these problems. In this work, we assess the linearity of a physically motivated calibration metric, $E_{Joule}$. We measure calibration pulses in the range 4.5 keV$<$$E_γ$$<$9.6 keV with detectors optimized for 6 keV photons to compare the linearity properties of $E_{Joule}$ to OFPH. In these test data sets, we find that $E_{Joule}$ fits a linear function an order of magnitude better than OFPH. Furthermore, calibration functions using $E_{J}$, an optimized version of $E_{Joule}$, are linear within the 2-3 eV noise of the data.

physics.ins-det↗

arXiv2016

Orbital textures and charge density waves in transition metal dichalcogenides

Low-dimensional electron systems, as realized naturally in graphene or created artificially at the interfaces of heterostructures, exhibit a variety of fascinating quantum phenomena with great prospects for future applications. Once electrons are confined to low dimensions, they also tend to spontaneously break the symmetry of the underlying nuclear lattice by forming so-called density waves; a state of matter that currently attracts enormous attention because of its relation to various unconventional electronic properties. In this study we reveal a remarkable and surprising feature of charge density waves (CDWs), namely their intimate relation to orbital order. For the prototypical material 1T-TaS2 we not only show that the CDW within the two-dimensional TaS2-layers involves previously unidentified orbital textures of great complexity. We also demonstrate that two metastable stackings of the orbitally ordered layers allow to manipulate salient features of the electronic structure. Indeed, these orbital effects enable to switch the properties of 1T-TaS2 nanostructures from metallic to semiconducting with technologically pertinent gaps of the order of 200 meV. This new type of orbitronics is especially relevant for the ongoing development of novel, miniaturized and ultra-fast devices based on layered transition metal dichalcogenides.

cond-mat.str-el↗

arXiv2015

Influence of Ti doping on the incommensurate charge density wave in 1T-TaS2

We report temperature-dependent transport and x-ray diffraction measurements of the influence of Ti hole doping on the charge density wave (CDW) in 1T-Ta(1-x)Ti(x)S(2). Confirming past studies, we find that even trace impurities eliminate the low-temperature commensurate (C) phase in this system. Surprisingly, the magnitude of the in-plane component of the CDW wave vector in the nearly commensurate (NC) phase does not change significantly with Ti concentration, as might be expected from a changing Fermi surface volume. Instead, the angle of the CDW in the basal plane rotates, from 11.9 deg at x=0 to 16.4 deg at x=0.12. Ti substitution also leads to an extended region of coexistence between incommensurate (IC) and NC phases, indicating heterogeneous nucleation near the transition. Finally, we explain a resistive anomaly originally observed by DiSalvo [F. J. DiSalvo, et al., Phys. Rev. B {\bf 12}, 2220 (1975)] as arising from pinning of the CDW on the crystal lattice. Our study highlights the importance of commensuration effects in the NC phase, particularly at x ~ 0.08.

cond-mat.str-el↗

arXiv2015

Microcalorimeter Spectroscopy at High Pulse Rates: a Multi-Pulse Fitting Technique

Transition edge sensor microcalorimeters can measure x-ray and gamma-ray energies with very high energy resolution and high photon-collection efficiency. For this technology to reach its full potential in future x-ray observatories, each sensor must be able to measure hundreds or even thousands of photon energies per second. Current "optimal filtering" approaches to achieve the best possible energy resolution work only for photons well isolated in time, a requirement in direct conflict with the need for high-rate measurements. We describe a new analysis procedure to allow fitting for the pulse height of all photons even in the presence of heavy pulse pile-up. In the limit of isolated pulses, the technique reduces to the standard optimal filtering with long records. We employ reasonable approximations to the noise covariance function in order to render multi-pulse fitting computationally viable even for very long data records. The technique is employed to analyze x-ray emission spectra at 600 eV and 6 keV at rates up to 250 counts per second in microcalorimeters having exponential signal decay times of approximately 1.2 ms.

astro-ph.IM↗

arXiv2013

Emergence of charge density wave domain walls above the superconducting dome in TiSe2

Superconductivity (SC) in so-called "unconventional superconductors" is nearly always found in the vicinity of another ordered state, such as antiferromagnetism, charge density wave (CDW), or stripe order. This suggests a fundamental connection between SC and fluctuations in some other order parameter. To better understand this connection, we used high-pressure x-ray scattering to directly study the CDW order in the layered dichalcogenide TiSe2, which was previously shown to exhibit SC when the CDW is suppressed by pressure [1] or intercalation of Cu atoms [2]. We succeeded in suppressing the CDW fully to zero temperature, establishing for the first time the existence of a quantum critical point (QCP) at Pc = 5.1 +/- 0.2 GPa, which is more than 1 GPa beyond the end of the SC region. Unexpectedly, at P = 3 GPa we observed a reentrant, weakly first order, incommensurate phase, indicating the presence of a Lifshitz tricritical point somewhere above the superconducting dome. Our study suggests that SC in TiSe2 may not be connected to the QCP itself, but to the formation of CDW domain walls.

cond-mat.supr-con↗

arXiv2009

Ultrafast Imaging and the "Phase Problem" for Inelastic X-Ray Scattering

We describe a new method for imaging ultrafast dynamics in condensed matter using inelastic x-ray scattering (IXS). We use the concepts of causality and irreversibility to construct a general solution to the inverse scattering problem (or "phase problem") for inelastic x-ray scattering, which enables direct imaging of dynamics of the electron density with resolutions of ~1 attosecond (10-18 sec) in time and < 1 A in space. This method is not a Fourier transform of IXS data, but a means to impose causality on the data and reconstruct the charge propagator. The method can also be applied to inelastic electron or neutron scattering. We give a general outline of phenomena that can and cannot be studied with this technique, and provide an outlook for the future.

cond-mat.other↗

arXiv2009

Implicit spatial averaging in inversion of inelastic x-ray scattering data

Inelastic x-ray scattering (IXS) now a widely used technique for studying the dynamics of electrons in condensed matter. We previously posed a solution to the phase problem for IXS [P. Abbamonte, et. al., Phys. Rev. Lett. {\bf 92}, 237401 (2004)], that allows explicit reconstruction of the density propagator of a system. The propagator represents, physically, the response of the system to an idealized, point perturbation, so provides direct, real-time images of electron motion with attosecond time resolution and $Å$-scale spatial resolution. Here we show that the images generated by our procedure, as it was originally posed, are spatial averages over all source locations. Within an idealized, atomic-like model, we show that in most cases a simple relationship to the complete, un-averaged response can still be determined. We illustrate this concept for recent IXS measurements of single crystal graphite.

cond-mat.str-el↗