SearcharxivSearch

arXiv subjects

Y. Inoue

Publications and source records attributed to Y. Inoue.

At least 19 recordsLinked to original sources

Direct measurement of the in-medium $\eta^{\prime}$ mass spectrum through the $\gamma\gamma$ decay channel

We measured the invariant mass of the $\eta^{\prime}(958)$ meson through the $\eta^{\prime}\to\gamma\gamma$ decay channel to search for possible character change of $\eta^{\prime}$ in a nuclear medium. The measured invariant-mass spectra were analyzed by fitting realistic spectral functions. An enhancement was observed in the lower tail of the $\eta^{\prime}$ mass peak for low-momentum ($P_{\gamma\gamma} < 1$~$\mathrm{GeV/c}$) events. Three statistical methods were applied to assess the significance of the enhancement. All methods yield a statistical significance above 3.7$\sigma$. The spectral fitting indicates a mass reduction of $57.5^{+~5.7}_{-27.8}$~$\mathrm{MeV/c}^{2}$. Our result provides the first evidence for an in-medium spectral modification of the $\eta^{\prime}$ meson obtained through a direct measurement of its invariant mass.

nucl-ex

Comprehensive measurement of $\eta^\prime$ photoproduction off the proton at $E_\gamma < 2.4$ $\mathrm{GeV}$

For the spectroscopy of nucleon resonances at the total energies from the $\eta^\prime$-meson production threshold to $2.32$ $\mathrm{GeV}$, photon beam asymmetries of the reaction $\gamma p \to \eta^\prime p$ were measured together with total and differential cross sections by analyzing the two decay modes $\eta^\prime \to \gamma \gamma$ and $\pi^0 \pi^0 \eta$. New constraints for amplitude decomposition were given by the first-time result of photon beam asymmetries at $E_\gamma > 1.84$ $\mathrm{GeV}$ and the most precise data of differential cross sections to date at extremely backward $\eta^\prime$ angles. The possibility of a larger coupling constant of the $\eta^\prime$-nucleon system to the $N(2250)$ resonance was implied in the partial wave analyses using the present data.

nucl-ex

Gamma-Ray and AntiMatter Survey(GRAMS) experiment

The Gamma-Ray and AntiMatter Survey (GRAMS) is a next-generation experiment using a Liquid Argon Time Projection Chamber (LArTPC) detector to measure MeV gamma rays and antiparticles. MeV gamma-ray observations are important for understanding multi-messenger and time-domain astronomy, enabling exploration of the universe's most potent events, such as supernovae and neutron star mergers. Despite the significance of MeV gamma-rays, GRAMS could also explore the so-called 'MeV gap' region to improve MeV gamma-ray measurement sensitivity that was restricted by the challenge of accurately reconstructing Compton events. Aside from gamma-ray detection, the GRAMS proposed method also serves as an antiparticle spectrometer, targeting the low-energy range of cosmic antinuclei measurements. This work will provide updates on the current status and progress towards the prototype balloon flight with a small-scale LArTPC (pGRAMS) scheduled for early 2026, as well as the recent progress on antihelium-3 sensitivity calculation.

hep-ex

Antihelium-3 Sensitivity for the GRAMS Experiment

The Gamma-Ray and AntiMatter Survey (GRAMS) is a next-generation balloon/satellite mission utilizing a Liquid Argon Time Projection Chamber (LArTPC) detector to measure both MeV gamma rays and antinuclei produced by dark matter annihilation or decay. The GRAMS can identify antihelium-3 events based on the measurements of X-rays and charged pions from the decay of the exotic atoms, Time of Flight (TOF), energy deposition, and stopping range. This paper shows the antihelium-3 sensitivity estimation using a GEANT4 Monte Carlo simulation. For the proposed long-duration balloon (LDB) flight program (35 days $ \times $ 3 flights) and future satellite mission (2-year observation / 10-year observation), the sensitivities become 1.47 $\times$ 10$^{-7}$ [m$^2$ s sr GeV/n]$^{-1}$ and 1.55 $\times$ 10$^{-9}$ [m$^2$ s sr GeV/n]$^{-1}$ / $3.10\times10^{-10}$ [m$^2$ s sr GeV/n]$^{-1}$, respectively. The results indicate that GRAMS can extensively investigate various dark matter models through the antihelium-3 measurements.

hep-ex

Advanced LIGO detector performance in the fourth observing run

On May 24th, 2023, the Advanced Laser Interferometer Gravitational-Wave Observatory (LIGO), joined by the Advanced Virgo and KAGRA detectors, began the fourth observing run for a two-year-long dedicated search for gravitational waves. The LIGO Hanford and Livingston detectors have achieved an unprecedented sensitivity to gravitational waves, with an angle-averaged median range to binary neutron star mergers of 152 Mpc and 160 Mpc, and duty cycles of 65.0% and 71.2%, respectively, with a coincident duty cycle of 52.6%. The maximum range achieved by the LIGO Hanford detector is 165 Mpc and the LIGO Livingston detector 177 Mpc, both achieved during the second part of the fourth observing run. For the fourth run, the quantum-limited sensitivity of the detectors was increased significantly due to the higher intracavity power from laser system upgrades and replacement of core optics, and from the addition of a 300 m filter cavity to provide the squeezed light with a frequency-dependent squeezing angle, part of the A+ upgrade program. Altogether, the A+ upgrades led to reduced detector-wide losses for the squeezed vacuum states of light which, alongside the filter cavity, enabled broadband quantum noise reduction of up to 5.2 dB at the Hanford observatory and 6.1 dB at the Livingston observatory. Improvements to sensors and actuators as well as significant controls commissioning increased low frequency sensitivity. This paper details these instrumental upgrades, analyzes the noise sources that limit detector sensitivity, and describes the commissioning challenges of the fourth observing run.

gr-qc

First operation of LArTPC in the stratosphere as an engineering GRAMS balloon flight (eGRAMS)

GRAMS (Gamma-Ray and AntiMatter Survey) is a next-generation balloon/satellite experiment utilizing a LArTPC (Liquid Argon Time Projection Chamber), to simultaneously target astrophysical observations of cosmic MeV gamma-rays and conduct an indirect dark matter search using antimatter. While LArTPCs are widely used in particle physics experiments, they have never been operated at balloon altitudes. An engineering balloon flight with a small-scale LArTPC (eGRAMS) was conducted on July 27th, 2023, to establish a system for safely operating a LArTPC at balloon altitudes and to obtain cosmic-ray data from the LArTPC. The flight was launched from the Japan Aerospace Exploration Agency's (JAXA) Taiki Aerospace Research Field in Hokkaido, Japan. The total flight duration was 3 hours and 12 minutes, including a level flight of 44 minutes at a maximum altitude of 28.9 km. The flight system was landed on the sea and successfully recovered. The LArTPC was successfully operated throughout the flight, and about 0.5 million events of the cosmic-ray data including muons, protons, and Compton scattering gamma-ray candidates, were collected. This pioneering flight demonstrates the feasibility of operating a LArTPC in high-altitude environments, paving the way for future GRAMS missions and advancing our capabilities in MeV gamma-ray astronomy and dark matter research.

astro-ph.IM

Development of advanced photon calibrator for Kamioka gravitational wave detector (KAGRA)

The Kamioka Gravitational wave detector (KAGRA) cryogenic gravitational-wave observatory has commenced joint observations with the worldwide gravitational wave detector network. Precise calibration of the detector response is essential for accurately estimating parameters of gravitational wave sources. A photon calibrator is a crucial calibration tool used in laser interferometer gravitational-wave observatory, Virgo, and KAGRA, and it was utilized in joint observation 3 with GEO600 in Germany in April 2020. In this paper, KAGRA implemented three key enhancements: a high-power laser, a power stabilization system, and remote beam position control. KAGRA employs a 20 W laser divided into two beams that are injected onto the mirror surface. By utilizing a high-power laser, the response of the detector at kHz frequencies can be calibrated. To independently control the power of each laser beam, an optical follower servo was installed for power stabilization. The optical path of the photon calibrator beam positions was controlled using pico-motors, allowing for the characterization of the detector rotation response. Additionally, a telephoto camera and quadrant photodetectors were installed to monitor beam positions, and beam position control was implemented to optimize the mirror response. In this paper, we discuss the statistical errors associated with the measurement of relative power noise. We also address systematic errors related to the power calibration model of the photon calibrator and the simulation of elastic deformation effects using finite element analysis. Ultimately, we have successfully reduced the total systematic error from the photon calibrator to 2.0 /%.

astro-ph.IM

Input optics systems of the KAGRA detector during O3GK

KAGRA, the underground and cryogenic gravitational-wave detector, was operated for its solo observation from February 25th to March 10th, 2020, and its first joint observation with the GEO 600 detector from April 7th -- 21st, 2020 (O3GK). This study presents an overview of the input optics systems of the KAGRA detector, which consist of various optical systems, such as a laser source, its intensity and frequency stabilization systems, modulators, a Faraday isolator, mode-matching telescopes, and a high-power beam dump. These optics were successfully delivered to the KAGRA interferometer and operated stably during the observations. The laser frequency noise was observed to limit the detector sensitivity above a few kHz, whereas the laser intensity did not significantly limit the detector sensitivity.

gr-qc

The POLARBEAR-2 and Simons Array Focal Plane Fabrication Status

We present on the status of POLARBEAR-2 A (PB2-A) focal plane fabrication. The PB2-A is the first of three telescopes in the Simon Array (SA), which is an array of three cosmic microwave background (CMB) polarization sensitive telescopes located at the POLARBEAR (PB) site in Northern Chile. As the successor to the PB experiment, each telescope and receiver combination is named as PB2-A, PB2-B, and PB2-C. PB2-A and -B will have nearly identical receivers operating at 90 and 150 GHz while PB2-C will house a receiver operating at 220 and 270 GHz. Each receiver contains a focal plane consisting of seven close-hex packed lenslet coupled sinuous antenna transition edge sensor bolometer arrays. Each array contains 271 di-chroic optical pixels each of which have four TES bolometers for a total of 7588 detectors per receiver. We have produced a set of two types of candidate arrays for PB2-A. The first we call Version 11 (V11) and uses a silicon oxide (SiOx) for the transmission lines and cross-over process for orthogonal polarizations. The second we call Version 13 (V13) and uses silicon nitride (SiNx) for the transmission lines and cross-under process for orthogonal polarizations. We have produced enough of each type of array to fully populate the focal plane of the PB2-A receiver. The average wirebond yield for V11 and V13 arrays is 93.2% and 95.6% respectively. The V11 arrays had a superconducting transition temperature (Tc) of 452 +/- 15 mK, a normal resistance (Rn) of 1.25 +/- 0.20 Ohms, and saturations powers of 5.2 +/- 1.0 pW and 13 +/- 1.2 pW for the 90 and 150 GHz bands respectively. The V13 arrays had a superconducting transition temperature (Tc) of 456 +/-6 mK, a normal resistance (Rn) of 1.1 +/- 0.2 Ohms, and saturations powers of 10.8 +/- 1.8 pW and 22.9 +/- 2.6 pW for the 90 and 150 GHz bands respectively.

astro-ph.IM

Noise subtraction from KAGRA O3GK data using Independent Component Analysis

In April 2020, KAGRA conducted its first science observation in combination with the GEO~600 detector (O3GK) for two weeks. According to the noise budget estimation, suspension control noise in the low frequency band and acoustic noise in the middle frequency band are identified as the dominant contribution. In this study, we show that such noise can be reduced in offline data analysis by utilizing a method called Independent Component Analysis (ICA). Here the ICA model is extended from the one studied in iKAGRA data analysis by incorporating frequency dependence while linearity and stationarity of the couplings are still assumed. By using optimal witness sensors, those two dominant contributions are mitigated in the real observational data. We also analyze the stability of the transfer functions for whole two weeks data in order to investigate how the current subtraction method can be practically used in gravitational wave search.

astro-ph.IM

Performance of the KAGRA detector during the first joint observation with GEO 600 (O3GK)

KAGRA, the kilometer-scale underground gravitational-wave detector, is located at Kamioka, Japan. In April 2020, an astrophysics observation was performed at the KAGRA detector in combination with the GEO 600 detector; this observation operation is called O3GK. The optical configuration in O3GK is based on a power recycled Fabry-P\'{e}rot Michelson interferometer; all the mirrors were set at room temperature. The duty factor of the operation was approximately 53%, and the strain sensitivity was $3\times10^{-22}~/\sqrt{\rm{Hz}}$ at 250 Hz. In addition, the binary-neutron-star (BNS) inspiral range was approximately 0.6 Mpc. The contributions of various noise sources to the sensitivity of O3GK were investigated to understand how the observation range could be improved; this study is called a "noise budget". According to our noise budget, the measured sensitivity could be approximated by adding up the effect of each noise. The sensitivity was dominated by noise from the sensors used for local controls of the vibration isolation systems, acoustic noise, shot noise, and laser frequency noise. Further, other noise sources that did not limit the sensitivity were investigated. This paper provides a detailed account of the KAGRA detector in O3GK including interferometer configuration, status, and noise budget. In addition, strategies for future sensitivity improvements such as hardware upgrades, are discussed.

astro-ph.IM

Differential cross sections and photon beam asymmetries of $\eta$ photoproduction on the proton at $E_\gamma$ = 1.3-2.4 GeV

We have carried out exclusive measurements for the photoproduction of an $\eta$ meson from a proton target with an egg-shaped calorimeter made of BGO crystals (BGOegg) and forward charged-particle detectors at the SPring-8 LEPS2 beamline. The differential cross sections and photon beam asymmetries of the $\gamma p \to \eta p$ reaction are measured in a center-of-mass energy ($W$) range of $1.82$-$2.32$ GeV and a polar angle range of $-1.0 < \cos{\theta^{\eta}_{\mathrm{c.m.}}} < 0.6$. The reaction is identified by selecting a proton and two $\gamma$'s produced by an $\eta$-meson decay. The kinematic fit method was employed to select the reaction candidate with the confidence level larger than $1$\%. A bump structure at $W$ = $2.0$-$2.3$ GeV in the differential cross section is confirmed at extremely backward $\eta$ polar angles, where the existing data are inconsistent with each other. This bump structure is likely associated with high-spin resonances that couple with $s\bar{s}$ quarks. The results of the photon beam asymmetries in a wide $\eta$ polar angle range are new for the photon beam energies exceeding $2.1$ GeV. These results are not reproduced by the existing partial wave analyses. They provide an additional constraint to nucleon resonance studies at high energies.

nucl-ex

The Scientific Observation Campaign of the Hayabusa-2 Capsule Re-entry

On 5th December 2020 at 17:28 UTC, the Japan Aerospace Exploration Agency's Hayabusa-2 sample return capsule came back to the Earth. It re-entered the atmosphere over South Australia, visible for 53 seconds as a fireball from near the Northern Territory border toward Woomera where it landed in the the Woomera military test range. A scientific observation campaign was planned to observe the optical, seismo-acoustic, radio and high energy particle phenomena associated with the entry of an interplanetary object. A multi-institutional collaboration between Australian and Japanese universities resulted in the deployment of 49 instruments, with a further 13 permanent observation sites. The campaign successfully recorded optical, seismo-acoustic and spectral data for this event which will allow an in depth analysis of the effects produced by interplanetary objects impacting the Earth's atmosphere. This will allow future comparison and insights to be made with natural meteoroid objects.

astro-ph.EP

Proton-$\rm ^3He$ elastic scattering at intermediate energies

We present a precise measurement of the cross section, proton and $\rm ^3He$ analyzing powers, and spin correlation coefficient $C_{y,y}$ for $p$-$\rm ^3He$ elastic scattering near 65 MeV, and a comparison with rigorous four-nucleon scattering calculations based on realistic nuclear potentials and a model with $\Delta$-isobar excitation. Clear discrepancies are seen in some of the measured observables in the regime around the cross section minimum. Theoretical predictions using scaling relations between the calculated cross section and the $\rm ^3 He$ binding energy are not successful in reproducing the data. Large sensitivity to the $NN$ potentials and rather small $\Delta$-isobar effects in the calculated cross section are noticed as different features from those in the deuteron-proton elastic scattering. The results obtained above indicate that $p$-$\rm ^3He$ scattering at intermediate energies is an excellent tool to explore nuclear interactions not accessible by three-nucleon scattering.

nucl-ex

Time-Domain Hybrid PAM for Data-Rate and Distance Adaptive UWOC System

The challenge for next-generation underwater optical wireless communication systems is to develop optical transceivers that can operate with low power consumption by maximizing the transmission capacity according to the transmission distance between transmitters and receivers. This study proposes an underwater wireless optical communication (UWOC) system using an optical transceiver with an optimum transmission rate for the deep sea with near-pure water properties. As a method for actualizing an optical transceiver with an optimum transmission rate in a UWOC system, time-domain hybrid pulse amplitude modulation (PAM) (TDHP) using a transmission rate and distance-adaptive intensity modulation/direct detection optical transceiver is considered. In the TDHP method, variable transmission capacity is actualized while changing the generation ratio of two intensity-modulated signals with different noise immunities in the time domain. Three different color laser diodes (LDs), red, blue, and green are used in an underwater channel transmission transceiver that comprises the LD and a photodiode. The maximum transmission distance while changing the incidence of PAM 2 and PAM 4 signals that calibrate the TDHP in a pure transmission line and how the maximum transmission distance changes when the optical transmitter/receiver spatial optical system is altered from the optimum conditions are clarified based on numerical calculation and simulation. To the best knowledge of the authors, there is no other research on data-rate and distance adaptive UWOC system that applies the TDHP signal with power optimization between two modulation formats.

cs.IT

Overview of KAGRA: Calibration, detector characterization, physical environmental monitors, and the geophysics interferometer

KAGRA is a newly built gravitational wave observatory, a laser interferometer with a 3 km arm length, located in Kamioka, Gifu, Japan. In this series of articles, we present an overview of the baseline KAGRA, for which we finished installing the designed configuration in 2019. This article describes the method of calibration (CAL) used for reconstructing gravitational wave signals from the detector outputs, as well as the characterization of the detector (DET). We also review the physical environmental monitors (PEM) system and the geophysics interferometer (GIF). Both are used for characterizing and evaluating the data quality of the gravitational wave channel. They play important roles in utilizing the detector output for gravitational wave searches. These characterization investigations will be even more important in the near future, once gravitational wave detection has been achieved, and in using KAGRA in the gravitational wave astronomy era.

gr-qc

Overview of KAGRA : KAGRA science

KAGRA is a newly build gravitational-wave observatory, a laser interferometer with 3 km arm length, located in Kamioka, Gifu, Japan. In this paper in the series of KAGRA-featured articles, we discuss the science targets of KAGRA projects, considering not only the baseline KAGRA (current design) but also its future upgrade candidates (KAGRA+) for the near to middle term (~5 years).

gr-qc

Overview of KAGRA: Detector design and construction history

KAGRA is a newly built gravitational-wave telescope, a laser interferometer comprising arms with a length of 3\,km, located in Kamioka, Gifu, Japan. KAGRA was constructed under the ground and it is operated using cryogenic mirrors that help in reducing the seismic and thermal noise. Both technologies are expected to provide directions for the future of gravitational-wave telescopes. In 2019, KAGRA finished all installations with the designed configuration, which we call the baseline KAGRA. In this occasion, we present an overview of the baseline KAGRA from various viewpoints in a series of of articles. In this article, we introduce the design configurations of KAGRA with its historical background.

physics.ins-det