arXiv subjects

Y. Lebreton

Publications and source records attributed to Y. Lebreton.

At least 37 records · Page 2Linked to original sources

arXiv2021

Modeling of two CoRoT solar analogues constrained by seismic and spectroscopic analysis

Solar analogues are important stars to study for understanding the properties of the Sun. Evolutionary modeling, combined with seismic and spectroscopic analysis, becomes a powerful method to characterize stellar intrinsic parameters, such as mass, radius, metallicity and age.However, these characteristics, relevant for other aspects of astrophysics or exoplanetary system physics for example, are difficult to obtain with a high precision and/or accuracy. The goal of this study is to characterize the two solar analogues HD42618 and HD43587, observed by CoRoT. In particular, we aim to infer precise mass, radius, and age, using evolutionary modeling constrained by spectroscopic, photometric, and seismic analysis. These stars show evidences of being older than the Sun but with a relatively large lithium abundance. We present the seismic analysis of HD42618, and the modeling of the two solar analogs HD42618 andHD43587 using the CESTAM stellar evolution code. Models were computed to reproduce the spectroscopic (effective temperature and metallicity) and seismic (mode frequencies) data,and the luminosity of the stars, based on Gaia parallaxes. We infer very similar values of mass and radius for both stars compared to the literature, within the uncertainties, and reproduce correctly the seismic constraints. For HD42618, the modeling shows it is slightly less massive and older than the Sun. For HD43587, it confirms it is more massive and older than the Sun,in agreement with previous results. The use of chemical clocks improves the reliability of our age estimates.

astro-ph.SR↗

arXiv2021

Seismic constraints on the internal structure of evolved stars: From high-luminosity RGB to AGB stars

The space-borne missions CoRoT and Kepler opened up a new opportunity for better understanding stellar evolution by probing stellar interiors with unrivalled high-precision photometric data. Kepler has observed stellar oscillation for four years, which gave access to excellent frequency resolution that enables deciphering the oscillation spectrum of evolved red giant branch and asymptotic giant branch stars. The internal structure of stars in the upper parts of the red and asymptotic giant branches is poorly constrained, which makes the distinction between red and asymptotic giants difficult. We perform a thorough seismic analysis to address the physical conditions inside these stars and to distinguish them. We studied the oscillation mode properties of about 2.000 evolved giants in a model described by the asymptotic pressure-mode pattern of red giants, which includes the signature of the helium second-ionisation zone. We extracted the mode properties up to the degree l = 3 and investigated their dependence on stellar mass, metallicity, and evolutionary status. We identify a clear difference in the signature of the helium second-ionisation zone between red and asymptotic giants. We also detect a clear shortage of the energy of l = 1 modes after the core-He-burning phase. Furthermore, we note that the mode damping observed on the asymptotic giant branch is similar to that observed on the red giant branch. We highlight that the signature of the helium second-ionisation zone varies with stellar evolution. This provides us with a physical basis for distinguishing red giant branch stars from asymptotic giants. Here, our investigation of stellar oscillations allows us to constrain the physical processes and the key events that occur during the advanced stages of stellar evolution, with emphasis on the ascent along the asymptotic giant branch, including the asymptotic giant branch bump.

astro-ph.SR↗

arXiv2020

The Aarhus red giants challenge II. Stellar oscillations in the red giant branch phase

Context. The large quantity of high-quality asteroseismic data that obtained from space-based photometric missions and the accuracy of the resulting frequencies motivate a careful consideration of the accuracy of computed oscillation frequencies of stellar models, when applied as diagnostics of the model properties. Aims. Based on models of red-giant stars that have been independently calculated using different stellar evolution codes, we investigate the extent to which the differences in the model calculation affect the model oscillation frequencies. Methods. For each of the models, which cover four different masses and different evolution stages on the red-giant branch, we computed full sets of low-degree oscillation frequencies using a single pulsation code and, from these frequencies, typical asteroseismic diagnostics. In addition, we carried out preliminary analyses to relate differences in the oscillation properties to the corresponding model differences. Results. In general, the differences in asteroseismic properties between the different models greatly exceed the observational precision of these properties, in particular for the nonradial modes whose mixed acoustic and gravity-wave character makes them sensitive to the structure of the deep stellar interior. In some cases, identifying these differences led to improvements in the final models presented here and in Paper I; here we illustrate particular examples of this. Conclusions. Further improvements in stellar modelling are required in order fully to utilise the observational accuracy to probe intrinsic limitations in the modelling. However, our analysis of the frequency differences and their relation to stellar internal properties provides a striking illustration of the potential of the mixed modes of red-giant stars for the diagnostics of stellar interiors.

astro-ph.SR↗

arXiv2019

The Aarhus Red Giants Challenge I: Stellar structures in the red giant branch phase

(Abridged). We introduce the Aarhus Red Giants Challenge, a series of detailed comparisons between widely used stellar evolution and oscillation codes aiming at establishing the minimum level of uncertainties in properties of red giants arising solely from numerical implementations. Using 9 state-of-the-art stellar evolution codes, we defined a set of input physics and physical constants for our calculations and calibrated the convective efficiency to a specific point on the main sequence. We produced evolutionary tracks and stellar structure models at fixed radius along the red-giant branch for masses of 1.0 M$_\odot$, 1.5 M$_\odot$, 2.0 M$_\odot$, and 2.5 M$_\odot$, and compared the predicted stellar properties. Once models have been calibrated on the main sequence we find a residual spread in the predicted effective temperatures across all codes of ~20 K at solar radius and ~30-40 K in the RGB regardless of the considered stellar mass. The predicted ages show variations of 2-5% (increasing with stellar mass) which we track down to differences in the numerical implementation of energy generation. The luminosity of the RGB-bump shows a spread of about 10% for the considered codes, which translates into magnitude differences of ~0.1 mag in the optical V-band. We also compare the predicted [C/N] abundance ratio and found a spread of 0.1 dex or more for all considered masses. Our comparisons show that differences at the level of a few percent still remain in evolutionary calculations of red giants branch stars despite the use of the same input physics. These are mostly due to differences in the energy generation routines and interpolation across opacities, and call for further investigations on these matters in the context of using properties of red giants as benchmarks for astrophysical studies.

astro-ph.SR↗

arXiv2019

Chemical mixing in low mass stars: I. Rotation against atomic diffusion including radiative accelerations

When modelling stars with masses larger than 1.2Msun with no observed chemical peculiarity, atomic diffusion is often neglected because, on its own, it causes unrealistic surface abundances compared with those observed. The reality is that atomic diffusion is in competition with other transport processes. The purpose of this study is to quantify the opposite or conjugated effects of atomic diffusion and rotationally induced mixing in stellar models of low mass stars. Our second goal is to estimate the impact of neglecting both rotational mixing and atomic diffusion in stellar parameter inferences for stars with masses larger than 1.3Msun. Using the AIMS code, we infer the masses and ages of a set of representative artificial stars for which models were computed with the CESTAM evolution code, taking into account rotationally induced mixing and atomic diffusion, including radiative accelerations. We show that for masses lower than 1.3Msun, rotation dominates the transport of chemical elements, and strongly reduces the effect of atomic diffusion, with net surface abundance modifications similar to solar ones. At larger mass, atomic diffusion and rotation are competing equally. Above 1.44Msun, atomic diffusion dominates in stellar models with initial rotation smaller than 80km.s-1 producing a chemical peculiarity which is not observed in Kepler-legacy stars. This indicates that a transport process of chemical elements is missing. Importantly, neglecting rotation and atomic diffusion (including radiative accelerations) in the models, when inferring the parameters of F-type stars, may lead to errors of 5%, 2.5% and 25% respectively for stellar masses, radii and ages. Atomic diffusion (including radiative accelerations) and rotational mixing should be taken into account in stellar models in order to determine accurate stellar parameters.

astro-ph.SR↗

arXiv2019

The PLATO Solar-like Light-curve Simulator: A tool to generate realistic stellar light-curves with instrumental effects representative of the PLATO mission

The preparation of science objectives of the ESA's PLATO space mission will require the implementation of hare-and-hound exercises relying on the massive generation of representative simulated light-curves. We developed a light-curve simulator named the PLATO Solar-like Light-curve Simulator (PSLS) in order to generate light-curves representative of typical PLATO targets, i.e. showing simultaneously solar-like oscillations, stellar granulation, and magnetic activity. At the same time, PSLS also aims at mimicking in a realistic way the random noise and the systematic errors representative of the PLATO multi-telescope concept. To quantify the instrumental systematic errors, we performed a series of simulations at pixel level that include various relevant sources of perturbations expected for PLATO. From the simulated pixels, we extract the photometry as planned on-board. The simulated light-curves are then corrected for instrumental effects using the instrument Point Spread Functions reconstructed on the basis of a microscanning technique that will be operated during the in-flight calibration phases. These corrected light-curves are then fitted by a parametric model, which we incorporated in PSLS. We show that the instrumental systematic errors dominate the signal only at frequencies below 20muHz and are found to mainly depend on stellar magnitude and on the detector charge transfer inefficiency. To illustrate how realistic our simulator is, we compared its predictions with observations made by Kepler on three typical targets and found a good qualitative agreement with the observations. PSLS reproduces the main properties of expected PLATO light-curves. Its speed of execution and its inclusion of relevant stellar signals as well as sources of noises representative of the PLATO cameras make it an indispensable tool for the scientific preparation of the PLATO mission.

astro-ph.IM↗

arXiv2018

Impacts of radiative accelerations on solar-like oscillating main-sequence stars

Chemical element transport processes are among the crucial physical processes needed for precise stellar modelling. Atomic diffusion by gravitational settling nowadays is usually taken into account, and is essential for helioseismic studies. On the other hand, radiative accelerations are rarely accounted for, act differently on the various chemical elements, and can strongly counteract gravity in some stellar mass domains. In this study we aim at determining whether radiative accelerations impact the structure of solar-like oscillating main-sequence stars observed by asteroseismic space missions. We implemented the calculation of radiative accelerations in the CESTAM code using the Single-Valued Parameter method. We built and compared several grids of stellar models including gravitational settling, but some with and others without radiative accelerations. We found that radiative accelerations may not be neglected for stellar masses larger than 1.1~M$_{\odot}$ at solar metallicity. The difference in age due to their inclusion in models can reach 9\% for the more massive stars of our grids. We estimated that the percentage of the PLATO core program stars whose modelling would require radiative accelerations ranges between 33 and 58\% depending on the precision of the seismic data. We conclude that, in the context of Kepler, TESS, and PLATO missions, which provide (or will provide) high quality seismic data, radiative accelerations can have a significant effect when inferring the properties of solar-like oscillators properly. This is particularly important for age inferences. However, the net effect for each individual star results from the competition between atomic diffusion including radiative accelerations and other internal transport processes. This will be investigated in a forthcoming companion paper.

astro-ph.SR↗

arXiv2017

Masses of the components of SB2 binaries observed with Gaia. IV. Accurate SB2 orbits for 14 binaries, and masses of 3 binaries

The orbital motion of non-contact double-lined spectroscopic binaries (SB2), with periods of a few tens of days to several years, holds unique accurate informations on individual stellar masses, that only long-term monitoring can unlock. The combination of radial velocity measurements from high-resolution spectrographs and astrometric measurements from high-precision interferometers allows the derivation of SB2 components masses down to the percent precision. Since 2010, we observed a large sample of SB2 with the SOPHIE spectrograph at the Observatoire de Haute-Provence, aiming at the derivation of orbital elements with sufficient accuracy to obtain masses of components with relative errors as low as 1$\%$ when the astrometric measurements of the Gaia satellite will be taken into account. In this paper we present the results from six years of observations of 14 SB2 systems with periods ranging from 33 to 4185 days. Using the TODMOR algorithm we computed radial velocities from the spectra, and then derived the orbital elements of these binary systems. The minimum masses of the 28 stellar components are then obtained with a sample average accuracy of 1.0$\pm$0.2$\,\%$. Combining the radial velocities with existing interferometric measurements, we derived the masses of the primary and secondary components of HIP 61100, HIP 95995 and HIP 101382 with relative errors for components (A,B) of respectively (2.0, 1.7)$\,\%$, (3.7, 3.7)$\,\%$, and (0.2, 0.1)$\,\%$. Using the Cesam2k stellar evolution code, we could constrain the initial He-abundance, age and metallicity for HIP 61100 and HIP 95995.

astro-ph.SR↗

arXiv2017

PLATO as it is: a legacy mission for Galactic archaeology

Deciphering the assembly history of the Milky Way is a formidable task, which becomes possible only if one can produce high-resolution chrono-chemo-kinematical maps of the Galaxy. Data from large-scale astrometric and spectroscopic surveys will soon provide us with a well-defined view of the current chemo-kinematical structure of the Milky Way, but will only enable a blurred view on the temporal sequence that led to the present-day Galaxy. As demonstrated by the (ongoing) exploitation of data from the pioneering photometric missions CoRoT, Kepler, and K2, asteroseismology provides the way forward: solar-like oscillating giants are excellent evolutionary clocks thanks to the availability of seismic constraints on their mass and to the tight age-initial-mass relation they adhere to. In this paper we identify five key outstanding questions relating to the formation and evolution of the Milky Way that will need precise and accurate ages for large samples of stars to be addressed, and we identify the requirements in terms of number of targets and the precision on the stellar properties that are needed to tackle such questions. By quantifying the asteroseismic yields expected from PLATO for red-giant stars, we demonstrate that these requirements are within the capabilities of the current instrument design, provided that observations are sufficiently long to identify the evolutionary state and allow robust and precise determination of acoustic-mode frequencies. This will allow us to harvest data of sufficient quality to reach a 10% precision in age. This is a fundamental pre-requisite to then reach the more ambitious goal of a similar level of accuracy, which will only be possible if we have to hand a careful appraisal of systematic uncertainties on age deriving from our limited understanding of stellar physics, a goal which conveniently falls within the main aims of PLATO's core science.

astro-ph.SR↗

arXiv2016

SpaceInn hare-and-hounds exercise: Estimation of stellar properties using space-based asteroseismic data

Context: Detailed oscillation spectra comprising individual frequencies for numerous solar-type stars and red giants are or will become available. These data can lead to a precise characterisation of stars. Aims: Our goal is to test and compare different methods for obtaining stellar properties from oscillation frequencies and spectroscopic constraints, in order to evaluate their accuracy and the reliability of the error bars. Methods: In the context of the SpaceInn network, we carried out a hare-and-hounds exercise in which one group produced "observed" oscillation spectra for 10 artificial solar-type stars, and various groups characterised these stars using either forward modelling or acoustic glitch signatures. Results: Results based on the forward modelling approach were accurate to 1.5 % (radius), 3.9 % (mass), 23 % (age), 1.5 % (surface gravity), and 1.8 % (mean density). For the two 1 Msun stellar targets, the accuracy on the age is better than 10 % thereby satisfying PLATO 2.0 requirements. The average accuracies for the acoustic radii of the base of the convection zone, the He II ionisation, and the Gamma_1 peak were 17 %, 2.4 %, and 1.9 %, respectively. Glitch fitting analysis seemed to be affected by aliasing problems for some of the targets. Conclusions: Forward modelling is the most accurate approach, but needs to be complemented by model-independent results from, e.g., glitch analysis. Furthermore, global optimisation algorithms provide more robust error bars.

astro-ph.SR↗

arXiv2016

Measuring the extent of convective cores in low-mass stars using Kepler data: towards a calibration of core overshooting

Our poor understanding of the boundaries of convective cores generates large uncertainties on the extent of these cores and thus on stellar ages. Our aim is to use asteroseismology to consistently measure the extent of convective cores in a sample of main-sequence stars whose masses lie around the mass-limit for having a convective core. We first test and validate a seismic diagnostic that was proposed to probe in a model-dependent way the extent of convective cores using the so-called $r_{010}$ ratios, which are built with $l=0$ and $l=1$ modes. We apply this procedure to 24 low-mass stars chosen among Kepler targets to optimize the efficiency of this diagnostic. For this purpose, we compute grids of stellar models with both the CESAM2k and MESA evolution codes, where the extensions of convective cores are modeled either by an instantaneous mixing or as a diffusion process. Among the selected targets, we are able to unambiguously detect convective cores in eight stars and we obtain seismic measurements of the extent of the mixed core in these targets with a good agreement between the CESAM2k and MESA codes. By performing optimizations using the Levenberg-Marquardt algorithm, we then obtain estimates of the amount of extra-mixing beyond the core that is required in CESAM2k to reproduce seismic observations for these eight stars and we show that this can be used to propose a calibration of this quantity. This calibration depends on the prescription chosen for the extra-mixing, but we find that it should be valid also for the code MESA, provided the same prescription is used. This study constitutes a first step towards the calibration of the extension of convective cores in low-mass stars, which will help reduce the uncertainties on the ages of these stars.

astro-ph.SR↗

arXiv2015

Masses of the components of SB2 binaries observed with Gaia. II. Masses derived from PIONIER interferometric observations for Gaia validation

In anticipation of the Gaia astrometric mission, a sample of spectroscopic binaries is being observed since 2010 with the Sophie spectrograph at the Haute--Provence Observatory. Our aim is to derive the orbital elements of double-lined spectroscopic binaries (SB2s) with an accuracy sufficient to finally obtain the masses of the components with relative errors as small as 1 % when combined with Gaia astrometric measurements. In order to validate the masses derived from Gaia, interferometric observations are obtained for three SB2s in our sample with F-K components: HIP 14157, HIP 20601 and HIP 117186. The masses of the six stellar components are derived. Due to its edge-on orientation, HIP 14157 is probably an eclipsing binary. We note that almost all the derived masses are a few percent larger than the expectations from the standard spectral-type-mass calibration and mass-luminosity relation. Our calculation also leads to accurate parallaxes for the three binaries, and the Hipparcos parallaxes are confirmed.

astro-ph.SR↗

arXiv2014

Mixed modes in red giants: a window on stellar evolution

The detection of oscillations with a mixed character in subgiants and red giants allows us to probe the physical conditions in their cores. With these mixed modes, we aim at determining seismic markers of stellar evolution. Kepler asteroseismic data were selected to map various evolutionary stages and stellar masses. Seismic evolutionary tracks were then drawn with the combination of the frequency and period spacings. We measured the asymptotic period spacing for more than 1170 stars at various evolutionary stages. This allows us to monitor stellar evolution from the main sequence to the asymptotic giant branch and draw seismic evolutionary tracks. We present clear quantified asteroseismic definitions that characterize the change in the evolutionary stages, in particular the transition from the subgiant stage to the early red giant branch, and the end of the horizontal branch.The seismic information is so precise that clear conclusions can be drawn independently of evolution models. The quantitative seismic information can now be used for stellar modeling, especially for studying the energy transport in the helium-burning core or for specifying the inner properties of stars entering the red or asymptotic giant branches. Modeling will also allow us to study stars that are identified to be in the helium-subflash stage, high-mass stars either arriving or quitting the secondary clump, or stars that could be in the blue-loop stage.

astro-ph.SR↗

arXiv2014

Properties of 42 Solar-type Kepler Targets from the Asteroseismic Modeling Portal

Recently the number of main-sequence and subgiant stars exhibiting solar-like oscillations that are resolved into individual mode frequencies has increased dramatically. While only a few such data sets were available for detailed modeling just a decade ago, the Kepler mission has produced suitable observations for hundreds of new targets. This rapid expansion in observational capacity has been accompanied by a shift in analysis and modeling strategies to yield uniform sets of derived stellar properties more quickly and easily. We use previously published asteroseismic and spectroscopic data sets to provide a uniform analysis of 42 solar-type Kepler targets from the Asteroseismic Modeling Portal (AMP). We find that fitting the individual frequencies typically doubles the precision of the asteroseismic radius, mass and age compared to grid-based modeling of the global oscillation properties, and improves the precision of the radius and mass by about a factor of three over empirical scaling relations. We demonstrate the utility of the derived properties with several applications.

astro-ph.SR↗

arXiv2014

The PLATO 2.0 Mission

PLATO 2.0 has recently been selected for ESA's M3 launch opportunity (2022/24). Providing accurate key planet parameters (radius, mass, density and age) in statistical numbers, it addresses fundamental questions such as: How do planetary systems form and evolve? Are there other systems with planets like ours, including potentially habitable planets? The PLATO 2.0 instrument consists of 34 small aperture telescopes (32 with 25 sec readout cadence and 2 with 2.5 sec candence) providing a wide field-of-view (2232 deg2) and a large photometric magnitude range (4-16 mag). It focusses on bright (4-11 mag) stars in wide fields to detect and characterize planets down to Earth-size by photometric transits, whose masses can then be determined by ground-based radial-velocity follow-up measurements. Asteroseismology will be performed for these bright stars to obtain highly accurate stellar parameters, including masses and ages. The combination of bright targets and asteroseismology results in high accuracy for the bulk planet parameters: 2%, 4-10% and 10% for planet radii, masses and ages, respectively. The planned baseline observing strategy includes two long pointings (2-3 years) to detect and bulk characterize planets reaching into the habitable zone (HZ) of solar-like stars and an additional step-and-stare phase to cover in total about 50% of the sky. PLATO 2.0 will observe up to 1,000,000 stars and detect and characterize hundreds of small planets, and thousands of planets in the Neptune to gas giant regime out to the HZ. It will therefore provide the first large-scale catalogue of bulk characterized planets with accurate radii, masses, mean densities and ages. This catalogue will include terrestrial planets at intermediate orbital distances, where surface temperatures are moderate. Coverage of this parameter range with statistical numbers of bulk characterized planets is unique to PLATO 2.0.

astro-ph.EP↗

arXiv2014

Seismic analysis of HD43587Aa, a solar-like oscillator in a multiple system

Context. The object HD 43587Aa is a G0V star observed during the 145-day LRa03 run of the COnvection, ROtation and planetary Transits space mission (CoRoT), for which complementary High Accuracy Radial velocity Planet Searcher (HARPS) spectra with S/N>300 were also obtained. Its visual magnitude is 5.71, and its effective temperature is close to 5950 K. It has a known companion in a highly eccentric orbit and is also coupled with two more distant companions. Aims. We undertake a preliminary investigation of the internal structure of HD 43587Aa. Methods. We carried out a seismic analysis of the star, using maximum likelihood estimators and Markov Chain Monte Carlo methods. Results. We established the first table of the eigenmode frequencies, widths, and heights for HD 43587Aa. The star appears to have a mass and a radius slightly larger than the Sun, and is slightly older (5.6 Gyr). Two scenarios are suggested for the geometry of the star: either its inclination angle is very low, or the rotation velocity of the star is very low. Conclusions. A more detailed study of the rotation and of the magnetic and chromospheric activity for this star is needed, and will be the subject of a further study. New high resolution spectrometric observations should be performed for at least several months in duration.

astro-ph.SR↗

arXiv2013

The Gaia astrophysical parameters inference system (Apsis). Pre-launch description

The Gaia satellite will survey the entire celestial sphere down to 20th magnitude, obtaining astrometry, photometry, and low resolution spectrophotometry on one billion astronomical sources, plus radial velocities for over one hundred million stars. Its main objective is to take a census of the stellar content of our Galaxy, with the goal of revealing its formation and evolution. Gaia's unique feature is the measurement of parallaxes and proper motions with hitherto unparalleled accuracy for many objects. As a survey, the physical properties of most of these objects are unknown. Here we describe the data analysis system put together by the Gaia consortium to classify these objects and to infer their astrophysical properties using the satellite's data. This system covers single stars, (unresolved) binary stars, quasars, and galaxies, all covering a wide parameter space. Multiple methods are used for many types of stars, producing multiple results for the end user according to different models and assumptions. Prior to its application to real Gaia data the accuracy of these methods cannot be assessed definitively. But as an example of the current performance, we can attain internal accuracies (RMS residuals) on F,G,K,M dwarfs and giants at G=15 (V=15-17) for a wide range of metallicites and interstellar extinctions of around 100K in effective temperature (Teff), 0.1mag in extinction (A0), 0.2dex in metallicity ([Fe/H]), and 0.25dex in surface gravity (logg). The accuracy is a strong function of the parameters themselves, varying by a factor of more than two up or down over this parameter range. After its launch in November 2013, Gaia will nominally observe for five years, during which the system we describe will continue to evolve in light of experience with the real data.

astro-ph.IM↗

arXiv2013

Stellar ages and convective cores in field main-sequence stars: first asteroseismic application to two Kepler targets

Using asteroseismic data and stellar evolution models we make the first detection of a convective core in a Kepler field main-sequence star, putting a stringent constraint on the total size of the mixed zone and showing that extra mixing beyond the formal convective boundary exists. In a slightly less massive target the presence of a convective core cannot be conclusively discarded, and thus its remaining main-sequence life time is uncertain. Our results reveal that best-fit models found solely by matching individual frequencies of oscillations corrected for surface effects do not always properly reproduce frequency combinations. Moreover, slightly different criteria to define what the best-fit model is can lead to solutions with similar global properties but very different interior structures. We argue that the use of frequency ratios is a more reliable way to obtain accurate stellar parameters, and show that our analysis in field main-sequence stars can yield an overall precision of 1.5%, 4%, and 10% in radius, mass and age, respectively. We compare our results with those obtained from global oscillation properties, and discuss the possible sources of uncertainties in asteroseismic stellar modeling where further studies are still needed.

astro-ph.SR↗