SearcharxivSearch

arXiv subjects

Y. Maan

Publications and source records attributed to Y. Maan.

At least 19 recordsLinked to original sources

Discovery of the redback millisecond pulsar PSR J1728-4608 with ASKAP

We present the discovery of PSR J1728-4608, a new redback spider pulsar identified in images from the Australian SKA Pathfinder telescope. PSR J1728-4608 is a millisecond pulsar with a spin period of 2.86 ms, in a 5.05 hr orbit with a companion star. The pulsar exhibits a radio spectrum of the form $S_ν\propto ν^α$, with a measured spectral index of $α= -1.8(3)$. It is eclipsed for 42% of its orbit at 888 MHz, and multi--frequency image--domain observations show that the egress duration scales with frequency as a power law with index $n = -1.74$, where longer duration eclipses are seen at lower frequencies. An optical counterpart is detected in archival Gaia data within $0.5''$ of the radio position. It has a mean G-band magnitude of 18.8 mag and its light curve displays characteristics consistent with a combination of ellipsoidal modulation and irradiation effects. We also report the nearest Fermi $γ$-ray source, located 2$'$ away from our source, as a possible association. A radio timing study constrains the intrinsic and orbital properties of the system, revealing orbital period variations that we attribute to changes in the gravitational quadrupole moment of the companion star. At the eclipse boundary, we measure a maximum dispersion measure excess of $2.0 \pm 1.2 \ \mathrm{pc\ cm^{-3}}$, corresponding to an electron column density of $5.9 \pm 3.6 \times10^{18} \ \mathrm{cm^{-2}}$. Modelling of the eclipse mechanism suggests that synchrotron absorption is the dominant cause of the eclipses observed at radio wavelengths. The discovery and characterisation of systems like \psr\ provide valuable insights into pulsar recycling, binary evolution, the nature of companion-driven eclipses, and the interplay between compact objects and their plasma environments.

astro-ph.HE

An activity transition in FRB 20201124A: methodological rigor, detection of frequency-dependent cessation, and a geometric magnetar model

We report detections of fast radio bursts (FRBs) from the repeating source FRB 20201124A with Apertif/WSRT and GMRT, and measurements of basic burst properties, especially the dispersion measure (DM) and fluence. Based on comparisons of these properties with previously published larger samples, we argue that the excess DM reported earlier for pulses with integrated signal to noise ratio $\lesssim 1000$ is due to incompletely accounting for the so-called sad trombone effect, even when using structure-maximizing DM algorithms. Our investigations of fluence distributions next lead us to advise against formal power-law fitting, especially dissuading the use of the least-square method, and we demonstrate the large biases involved. A maximum likelihood estimator (MLE) provides a much more accurate estimate of the power law and we provide accessible code for direct inclusion in future research. Our GMRT observations were fortuitously scheduled around the end of the activity cycle as recorded by FAST. We detected several bursts (one of them very strong) at 400/600 MHz, a few hours after sensitive FAST non-detections already showed the 1.3 GHz FRB emission to have ceased. After FRB 20180916B, this is a second example of a frequency-dependent activity window identified in a repeating FRB source. Since numerous efforts have so-far failed to determine a spin period for FRB 20201124A, we conjecture it to be an ultra-long period magnetar, with a period on the scale of months, and with a very wide, highly irregular duty cycle. Assuming the emission comes from closed field lines, we use radius-to-frequency mapping and polarization information from other studies to constrain the magnetospheric geometry and location of the emission region. Our initial findings are consistent with a possible connection between FRBs and crustal motion events.

astro-ph.HE

The second data release from the European Pulsar Timing Array V. Search for continuous gravitational wave signals

We present the results of a search for continuous gravitational wave signals (CGWs) in the second data release (DR2) of the European Pulsar Timing Array (EPTA) collaboration. The most significant candidate event from this search has a gravitational wave frequency of 4-5 nHz. Such a signal could be generated by a supermassive black hole binary (SMBHB) in the local Universe. We present the results of a follow-up analysis of this candidate using both Bayesian and frequentist methods. The Bayesian analysis gives a Bayes factor of 4 in favor of the presence of the CGW over a common uncorrelated noise process, while the frequentist analysis estimates the p-value of the candidate to be 1%, also assuming the presence of common uncorrelated red noise. However, comparing a model that includes both a CGW and a gravitational wave background (GWB) to a GWB only, the Bayes factor in favour of the CGW model is only 0.7. Therefore, we cannot conclusively determine the origin of the observed feature, but we cannot rule it out as a CGW source. We present results of simulations that demonstrate that data containing a weak gravitational wave background can be misinterpreted as data including a CGW and vice versa, providing two plausible explanations of the EPTA DR2 data. Further investigations combining data from all PTA collaborations will be needed to reveal the true origin of this feature.

astro-ph.HE

Topology of Pulsar Profiles (ToPP). I. Graph theory method and classification of the EPN

Some of the most important information on a radio pulsar is derived from its average pulse profile. Many early pulsar studies were necessarily based on only few such profiles. There, discrete profile components were linked to emission mechanism models for individual stars through human interpretation. For the population as a whole, profiles morphology must reflect the geometry and overall evolution of the radio emitting regions. The problem, however, is that this population is becoming too large for intensive studies of all sources individually. Moreover, connecting profiles from a large collection of pulsars rapidly becomes cumbersome. In this article, we present ToPP, the first-ever unsupervised method to sort pulsars by profile-shape similarity, using graph topology. We apply ToPP to the publicly available European Pulsar Network profile database, providing the first organised visual overview of multi-frequency profiles representing 90 individual pulsars. We find discrete evolutionary tracks, varying from simple, single component profiles at all frequencies, towards diverse mixtures of more complex profiles with frequency evolution. The profile evolution is continuous, extending out to millisecond pulsars, and does not fall in sharp classes. We interpret the profiles as a mixture of pulsar core/cone emission type, spin-down energetics, and the line-of-sight impact angle towards the magnetic axis. We show how ToPP can systematically classify sources into the Rankin empirical profile scheme. ToPP forms one of the key unsupervised methods that will be essential to explore upcoming pulsar census data such as expected by the Square Kilometer Array.

astro-ph.HE

The second data release from the European Pulsar Timing Array: IV. Implications for massive black holes, dark matter and the early Universe

The European Pulsar Timing Array (EPTA) and Indian Pulsar Timing Array (InPTA) collaborations have measured a low-frequency common signal in the combination of their second and first data releases respectively, with the correlation properties of a gravitational wave background (GWB). Such signal may have its origin in a number of physical processes including a cosmic population of inspiralling supermassive black hole binaries (SMBHBs); inflation, phase transitions, cosmic strings and tensor mode generation by non-linear evolution of scalar perturbations in the early Universe; oscillations of the Galactic potential in the presence of ultra-light dark matter (ULDM). At the current stage of emerging evidence, it is impossible to discriminate among the different origins. Therefore, in this paper, we consider each process separately, and investigate the implications of the signal under the hypothesis that it is generated by that specific process. We find that the signal is consistent with a cosmic population of inspiralling SMBHBs, and its relatively high amplitude can be used to place constraints on binary merger timescales and the SMBH-host galaxy scaling relations. If this origin is confirmed, this is the first direct evidence that SMBHBs merge in nature, adding an important observational piece to the puzzle of structure formation and galaxy evolution. As for early Universe processes, the measurement would place tight constraints on the cosmic string tension and on the level of turbulence developed by first-order phase transitions. Other processes would require non-standard scenarios, such as a blue-tilted inflationary spectrum or an excess in the primordial spectrum of scalar perturbations at large wavenumbers. Finally, a ULDM origin of the detected signal is disfavoured, which leads to direct constraints on the abundance of ULDM in our Galaxy.

astro-ph.CO

The second data release from the European Pulsar Timing Array II. Customised pulsar noise models for spatially correlated gravitational waves

The nanohertz gravitational wave background (GWB) is expected to be an aggregate signal of an ensemble of gravitational waves emitted predominantly by a large population of coalescing supermassive black hole binaries in the centres of merging galaxies. Pulsar timing arrays, ensembles of extremely stable pulsars, are the most precise experiments capable of detecting this background. However, the subtle imprints that the GWB induces on pulsar timing data are obscured by many sources of noise. These must be carefully characterized to increase the sensitivity to the GWB. In this paper, we present a novel technique to estimate the optimal number of frequency coefficients for modelling achromatic and chromatic noise and perform model selection. We also incorporate a new model to fit for scattering variations in the pulsar timing package temponest and created realistic simulations of the European Pulsar Timing Array (EPTA) datasets that allowed us to test the efficacy of our noise modelling algorithms. We present an in-depth analysis of the noise properties of 25 millisecond pulsars (MSPs) that form the second data release (DR2) of the EPTA and investigate the effect of incorporating low-frequency data from the Indian PTA collaboration. We use enterprise and temponest packages to compare noise models with those reported with the EPTA DR1. We find that, while in some pulsars we can successfully disentangle chromatic from achromatic noise owing to the wider frequency coverage in DR2, in others the noise models evolve in a more complicated way. We also find evidence of long-term scattering variations in PSR J1600$-$3053. Through our simulations, we identify intrinsic biases in our current noise analysis techniques and discuss their effect on GWB searches. The results presented here directly help improve sensitivity to the GWB and are already being used as part of global PTA efforts.

astro-ph.HE

The second data release from the European Pulsar Timing Array III. Search for gravitational wave signals

We present the results of the search for an isotropic stochastic gravitational wave background (GWB) at nanohertz frequencies using the second data release of the European Pulsar Timing Array (EPTA) for 25 millisecond pulsars and a combination with the first data release of the Indian Pulsar Timing Array (InPTA). We analysed (i) the full 24.7-year EPTA data set, (ii) its 10.3-year subset based on modern observing systems, (iii) the combination of the full data set with the first data release of the InPTA for ten commonly timed millisecond pulsars, and (iv) the combination of the 10.3-year subset with the InPTA data. These combinations allowed us to probe the contributions of instrumental noise and interstellar propagation effects. With the full data set, we find marginal evidence for a GWB, with a Bayes factor of four and a false alarm probability of $4\%$. With the 10.3-year subset, we report evidence for a GWB, with a Bayes factor of $60$ and a false alarm probability of about $0.1\%$ ($\gtrsim 3σ$ significance). The addition of the InPTA data yields results that are broadly consistent with the EPTA-only data sets, with the benefit of better noise modelling. Analyses were performed with different data processing pipelines to test the consistency of the results from independent software packages. The inferred spectrum from the latest EPTA data from new generation observing systems is rather uncertain and in mild tension with the common signal measured in the full data set. However, if the spectral index is fixed at 13/3, the two data sets give a similar amplitude of ($2.5\pm0.7)\times10^{-15}$ at a reference frequency of $1\,{\rm yr}^{-1}$. By continuing our detection efforts as part of the International Pulsar Timing Array (IPTA), we expect to be able to improve the measurement of spatial correlations and better characterise this signal in the coming years.

astro-ph.HE

An interference detection strategy for Apertif based on AOFlagger 3

Context. Apertif is a multi-beam receiver system for the Westerbork Synthesis Radio Telescope that operates at 1.1-1.5 GHz, which overlaps with various radio services, resulting in contamination of astronomical signals with radio-frequency interference (RFI). Aims. We analyze approaches to mitigate Apertif interference and design an automated detection procedure for its imaging mode. Using this approach, we present long-term RFI detection results of over 300 Apertif observations. Methods. Our approach is based on the AOFlagger detection approach. We introduce several new features, including ways to deal with ranges of invalid data (e.g. caused by shadowing) in both the SumThreshold and scale-invariant rank operator steps; pre-calibration bandpass calibration; auto-correlation flagging; and HI flagging avoidance. These methods are implemented in a new framework that uses the Lua language for scripting, which is new in AOFlagger version 3. Results. Our approach removes RFI fully automatically, and is robust and effective enough for further calibration and (continuum) imaging of these data. Analysis of 304 observations show an average of 11.1% of lost data due to RFI with a large spread. We observe 14.6% RFI in auto-correlations. Computationally, AOFlagger achieves a throughput of 370 MB/s on a single computing node. Compared to published machine learning results, the method is one to two orders of magnitude faster.

astro-ph.IM

First release of Apertif imaging survey data

(Abridged) Apertif is a phased-array feed system for WSRT, providing forty instantaneous beams over 300 MHz of bandwidth. A dedicated survey program started on 1 July 2019, with the last observations taken on 28 February 2022. We describe the release of data products from the first year of survey operations, through 30 June 2020. We focus on defining quality control metrics for the processed data products. The Apertif imaging pipeline, Apercal, automatically produces non-primary beam corrected continuum images, polarization images and cubes, and uncleaned spectral line and dirty beam cubes for each beam of an Apertif imaging observation. For this release, processed data products are considered on a beam-by-beam basis within an observation. We validate the continuum images by using metrics that identify deviations from Gaussian noise in the residual images. If the continuum image passes validation, we release all processed data products for a given beam. We apply further validation to the polarization and line data products. We release all raw observational data from the first year of survey observations, for a total of 221 observations of 160 independent target fields, covering approximately one thousand square degrees of sky. Images and cubes are released on a per beam basis, and 3374 beams are released. The median noise in the continuum images is 41.4 uJy/bm, with a slightly lower median noise of 36.9 uJy/bm in the Stokes V polarization image. The median angular resolution is 11.6"/sin(Dec). The median noise for all line cubes, with a spectral resolution of 36.6 kHz, is 1.6 mJy/bm, corresponding to a 3-sigma HI column density sensitivity of 1.8 x 10^20 atoms cm^-2 over 20 km/s (for a median angular resolution of 24" x 15"). We also provide primary beam images for each individual Apertif compound beam. The data are made accessible using a Virtual Observatory interface.

astro-ph.IM

Continuum source catalog for the first APERTIF data release

The first data release of Apertif survey contains 3074 radio continuum images covering a thousand square degrees of the sky. The observations were performed during August 2019 to July 2020. The continuum images were produced at a central frequency 1355 MHz with the bandwidth of $\sim$150 MHz and angular resolution reaching 10". In this work we introduce and apply a new method to obtain a primary beam model using a machine learning approach, Gaussian process regression. The primary beam models obtained with this method are published along with the data products for the first Apertif data release. We apply the method to the continuum images, mosaic them and extract the source catalog. The catalog contains 249672 radio sources many of which are detected for the first time at these frequencies. We cross-match the coordinates with the NVSS, LOFAR/DR1/value-added and LOFAR/DR2 catalogs resulting in 44523, 22825 and 152824 common sources respectively. The first sample provides a unique opportunity to detect long term transient sources which have significantly changed their flux density for the last 25 years. The second and the third ones combined together provide information about spectral properties of the sources as well as the redshift estimates.

astro-ph.IM

Characterising the Apertif primary beam response

Context. Phased Array Feeds (PAFs) are multi element receivers in the focal plane of a telescope that make it possible to form simultaneously multiple beams on the sky by combining the complex gains of the individual antenna elements. Recently the Westerbork Synthesis Radio Telescope (WSRT) was upgraded with PAF receivers and carried out several observing programs including two imaging surveys and a time domain survey. The Apertif imaging surveys use a configuration, where 40 partially overlapping compound beams (CBs) are simultaneously formed on the sky and arranged in an approximately rectangular shape. Aims. This manuscript aims to characterise the response of the 40 Apertif CBs to create frequency-resolved, I, XX and YY polarization empirical beam shapes. The measured CB maps can be used for image deconvolution, primary beam correction and mosaicing of Apertif imaging data. Methods. We use drift scan measurements to measure the response of each of the 40 CBs of Apertif. We derive beam maps for all individual beams in I, XX and YY polarisation in 10 or 18 frequency bins over the same bandwidth as the Apertif imaging surveys. We sample the main lobe of the beams and the side lobes up to a radius of 0.6 degrees from the beam centres. In addition, we derive beam maps for each individual WSRT dish as well. Results. We present the frequency and time dependence of the beam shapes and sizes. We compare the compound beam shapes derived with the drift scan method to beam shapes derived with an independent method using a Gaussian Process Regression comparison between the Apertif continuum images and the NRAO VLA Sky Survey (NVSS) catalogue. We find a good agreement between the beam shapes derived with the two independent methods.

astro-ph.IM

The Apertif science verification campaign - Characteristics of polarised radio sources

We analyse five early science datasets from the APERture Tile in Focus (Apertif) phased array feed system to verify the polarisation capabilities of Apertif in view of future larger data releases. We aim to characterise the source population of the polarised sky in the L-Band using polarised source information in combination with IR and optical data. We use automatic routines to generate full field-of-view Q- and U-cubes and perform RM-Synthesis, source finding, and cross-matching with published radio, optical, and IR data to generate polarised source catalogues. SED-fitting routines were used to determine photometric redshifts, star-formation rates, and galaxy masses. IR colour information was used to classify sources as AGN or star-forming-dominated and early- or late-type. We surveyed an area of 56deg$^2$ and detected 1357 polarised source components in 1170 sources. The fraction of polarised sources is 10.57% with a median fractional polarisation of 4.70$\pm$0.14%. We confirmed the reliability of the Apertif measurements by comparing them with polarised cross-identified NVSS sources. Average RMs of the individual fields lie within the error of the best Milky Way foreground measurements. All of our polarised sources were found to be dominated by AGN activity in the radio regime with most of them being radio-loud (79%) and of the FRII class (87%). The host galaxies of our polarised source sample are dominated by intermediate disc and star-forming disc galaxies. The contribution of star formation to the radio emission is on the order of a few percent for $\approx$10% of the polarised sources while for $\approx$90% it is completely dominated by the AGN. We do not see any change in fractional polarisation for different star-formation rates of the AGN host galaxies.

astro-ph.GA

Apercal -- The Apertif Calibration Pipeline

Apertif (APERture Tile In Focus) is one of the Square Kilometre Array (SKA) pathfinder facilities. The Apertif project is an upgrade to the 50-year-old Westerbork Synthesis Radio Telescope (WSRT) using phased-array feed technology. The new receivers create 40 individual beams on the sky, achieving an instantaneous sky coverage of 6.5 square degrees. The primary goal of the Apertif Imaging Survey is to perform a wide survey of 3500 square degrees (AWES) and a medium deep survey of 350 square degrees (AMES) of neutral atomic hydrogen (up to a redshift of 0.26), radio continuum emission and polarisation. Each survey pointing yields 4.6 TB of correlated data. The goal of Apercal is to process this data and fully automatically generate science ready data products for the astronomical community while keeping up with the survey observations. We make use of common astronomical software packages in combination with Python based routines and parallelisation. We use an object oriented module-based approach to ensure easy adaptation of the pipeline. A Jupyter notebook based framework allows user interaction and execution of individual modules as well as a full automatic processing of a complete survey observation. If nothing interrupts processing, we are able to reduce a single pointing survey observation on our five node cluster with 24 physical cores and 256 GB of memory each within 24h keeping up with the speed of the surveys. The quality of the generated images is sufficient for scientific usage for 44 % of the recorded data products with single images reaching dynamic ranges of several thousands. Future improvements will increase this percentage to over 80 %. Our design allowed development of the pipeline in parallel to the commissioning of the Apertif system.

astro-ph.IM

Dual-frequency single-pulse study of PSR B0950+08

PSR B0950+08 is a bright non-recycled pulsar whose single-pulse fluence variability is reportedly large. Based on observations at two widely separated frequencies, 55 MHz (NenuFAR) and 1.4 GHz (Westerbork Synthesis Radio Telescope), we review the properties of these single pulses. We conclude that they are more similar to ordinary pulses of radio emission than to a special kind of short and bright Giant Pulses, observed from only a handful of pulsars. We argue that temporal variation of properties of interstellar medium along the line of sight to this nearby pulsar, namely the fluctuating size of decorrelation bandwidth of diffractive scintillation makes important contribution to observed single-pulse fluence variability. We further present interesting structures in the low-frequency single-pulse spectra that resemble the "sad trombones" seen in Fast Radio Bursts (FRBs); although for PSR B0950+08 the upward frequency drift is also routinely present. We explain these spectral features with radius-to-frequency mapping, similar to the model developed by Wang et al. (2019) for FRBs. Finally, we speculate that microsecond-scale fluence variability of the general pulsar population remains poorly known, and that its further study may bring important clues about the nature of FRBs.

astro-ph.HE

Apertif, Phased Array Feeds for the Westerbork Synthesis Radio Telescope

We describe the APERture Tile In Focus (Apertif) system, a phased array feed (PAF) upgrade of the Westerbork Synthesis Radio Telescope which has transformed this telescope into a high-sensitivity, wide field-of-view L-band imaging and transient survey instrument. Using novel PAF technology, up to 40 partially overlapping beams can be formed on the sky simultaneously, significantly increasing the survey speed of the telescope. With this upgraded instrument, an imaging survey covering an area of 2300 deg2 is being performed which will deliver both continuum and spectral line data sets, of which the first data has been publicly released. In addition, a time domain transient and pulsar survey covering 15,000 deg2 is in progress. An overview of the Apertif science drivers, hardware and software of the upgraded telescope is presented, along with its key performance characteristics.

astro-ph.IM

A search for radio emission from double-neutron star merger GW190425 using Apertif

Detection of the electromagnetic emission from coalescing binary neutron stars (BNS) is important for understanding the merger and afterglow. We present a search for a radio counterpart to the gravitational-wave source GW190425, a BNS merger, using Apertif on the Westerbork Synthesis Radio Telescope (WSRT). We observe a field of high probability in the associated localisation region for 3 epochs at 68, 90 and 109 days post merger. We identify all sources that exhibit flux variations consistent with the expected afterglow emission of GW190425. We also look for possible transients. These are sources which are only present in one epoch. In addition, we quantify our ability to search for radio afterglows in fourth and future observing runs of the gravitational-wave detector network using Monte Carlo simulations. We found 25 afterglow candidates based on their variability. None of these could be associated with a possible host galaxy at the luminosity distance of GW190425. We also found 55 transient afterglow candidates that were only detected in one epoch. All turned out to be image artefacts. In the fourth observing run, we predict that up to three afterglows will be detectable by Apertif. While we did not find a source related to the afterglow emission of GW190425, the search validates our methods for future searches of radio afterglows.

astro-ph.HE

The best of both worlds: Combining LOFAR and Apertif to derive resolved radio spectral index images

Supermassive black holes at the centres of galaxies can cycle through periods of activity and quiescence. Characterising the duty cycle of active galactic nuclei is crucial for understanding the impact of the energy they release on the host galaxy. For radio AGN, this can be done by identifying dying (remnant) and restarted radio galaxies from their radio spectral properties. Using the combination of images at 1400 MHz produced by Apertif, the new phased-array feed receiver installed on the Westerbork Synthesis Radio Telescope, and images at 150 MHz provided by LOFAR, we have derived resolved spectral index images (at a resolution of ~15 arcsec) for all the sources within ~6 deg^2 area of the Lockman Hole region. We were able to select 15 extended radio sources with emission (partly or entirely) characterised by extremely steep spectral indices (steeper than 1.2). These objects represent radio sources in the remnant or the restarted phases of their life cycle. Our findings suggest this cycle to be relatively fast. They also show a variety of properties relevant for modelling the evolution of radio galaxies. For example, the restarted activity can occur while the remnant structure from a previous phase of activity is still visible. This provides constraints on the duration of the 'off' (dying) phase. In extended remnants with ultra-steep spectra at low frequencies, the activity likely stopped a few hundred megayears ago, and they correspond to the older tail of the age distribution of radio galaxies, in agreement with simulations of radio source evolution. We find remnant radio sources with a variety of structures (from double-lobed to amorphous), suggesting different types of progenitors. The present work sets the stage for exploiting low-frequency spectral index studies of extended sources by taking advantage of the large areas common to the LOFAR and the Apertif surveys.

astro-ph.GA

Extreme intra-hour variability of the radio source J1402+5347 discovered with Apertif

The propagation of radio waves from distant compact radio sources through turbulent interstellar plasma in our Galaxy causes these sources to twinkle, a phenomenon called interstellar scintillation. Such scintillations are a unique probe of the micro-arcsecond structure of radio sources as well as of the sub-AU-scale structure of the Galactic interstellar medium. Weak scintillations (i.e. an intensity modulation of a few percent) on timescales of a few days or longer are commonly seen at centimetre wavelengths and are thought to result from the line-of-sight integrated turbulence in the interstellar plasma of the Milky Way. So far, only three sources were known that show more extreme variations, with modulations at the level of some dozen percent on timescales shorter than an hour. This requires propagation through nearby (d <~10 pc) anomalously dense (n_e ~10^2 cm^-3) plasma clouds. Here we report the discovery with Apertif of a source (J1402+5347) showing extreme (~50%) and rapid variations on a timescale of just 6.5 minutes in the decimetre band (1.4 GHz). The spatial scintillation pattern is highly anisotropic, with a semi-minor axis of about 20,000 km. The canonical theory of refractive scintillation constrains the scattering plasma to be within the Oort cloud. The sightline to J1402+5347, however, passes unusually close to the B3 star Alkaid (eta UMa) at a distance of 32 pc. If the scintillations are associated with Alkaid, then the angular size of J1402+5347 along the minor axis of the scintels must be smaller than ~10 micro arcsec yielding an apparent brightness temperature for an isotropic source of >~ 10^ 14K. }

astro-ph.GA