arXiv subjects

Y. Nagasaka

Publications and source records attributed to Y. Nagasaka.

43 records · Page 3Linked to original sources

arXiv2011

A tagged low-momentum kaon test-beam exposure with a 250L LAr TPC (J-PARC T32)

At the beginning of 2010, we presented at the J-PARC PAC an R$&$D program towards large (100 kton scale) liquid argon TPCs, suitable to investigate, in conjunction with the J-PARC neutrino beam, the possibility of CP violation in the neutrino sector and to search for nucleon decay. As a first step we proposed a test experiment to identify and measure charged kaons, including their decays, in liquid argon. The detector, a 250L LAr TPC, is exposed to charged kaons, in a momentum range of 540-800 MeV/c, in the K1.1BR beamline of the J-PARC slow extraction facility. This is especially important to estimate efficiency and background for nucleon decay searches in the charged kaon mode ($p \rightarrow \barν K^+$, etc.), where the kaon momentum is expected to be in the few hundred MeV/c range. A prototype setup has been exposed in the K1.1BR beamline in the fall of 2010. This paper describes the capabilities of the beamline, the construction and setting up of the detector prototype, along with some preliminary results.

physics.ins-det↗

arXiv2011

Development and evaluation of 10-inch Photo-Multiplier Tubes for the Double Chooz experiment

The goal of Double Chooz experiment is a precise measurement of the last unknown mixing angle theta_13 using two identical detectors placed at far and near sites from Chooz reactor cores. The detector is optimized for reactor-neutrino detection using specially developed 10-inch PMTs. We developed two types of measurement systems and evaluated 400 PMTs before the installation. Those PMTs fulfill our requirements, and a half of those have been installed to the far detector in 2009. The character and performance data of the PMTs are stored in a database and will be referenced in analysis and MC simulation.

physics.ins-det↗

arXiv2011

Measurement of the decay $B^0\toπ^-\ell^+ν$ and determination of $|V_{ub}|$

We present a measurement of the charmless semileptonic decay $B^0\toπ^-\ell^+ν$ using a data sample containing 657$\times 10^6$ $B\bar{B}$ events collected with the Belle detector at the KEKB asymmetric-energy $e^+e^-$ collider operating near the $Υ(4S)$ resonance. We determine the total branching fraction of the decay, $\mathcal{B}(B^0\toπ^-\ell^+ν)=(1.49\pm 0.04{(\mathrm{stat})}\pm 0.07{(\mathrm{syst})})\times 10^{-4}$. We also report a new precise measurement of the differential decay rate, and extract the Cabibbo-Kobayashi-Maskawa matrix element $|V_{ub}|$ using model-independent and -dependent approaches. From a simultaneous fit to the measured differential decay rate and lattice QCD results, we obtain $|V_{ub}|=(3.43\pm 0.33)\times 10^{-3}$, where the error includes both statistical and systematic uncertainties.

hep-ex↗

arXiv2006

On-site underground background measurements for the KASKA reactor-neutrino experiment

On-site underground background measurements were performed for the planned reactor-neutrino oscillation experiment KASKA at Kashiwazaki-Kariwa nuclear power station in Niigata, Japan. A small-diameter boring hole was excavated down to 70m underground level, and a detector unit for $γ$-ray and cosmic-muon measurements was placed at various depths to take data. The data were analyzed to obtain abundance of natural radioactive elements in the surrounding soil and rates of cosmic muons that penetrate the overburden. The results will be reflected in the design of the KASKA experiment.

hep-ex↗

arXiv2006

Letter of Intent for KASKA: High Accuracy Neutrino Oscillation Measurements with anti-nu_es from Kashiwazaki-Kariwa Nuclear Power Station

One of the current most-demanded experiments in neutrino physics is to measure the last mixing angle theta_13. KASKA is an experiment to detect new type of reactor neutrino oscillation and to measure sin^2 2theta_13 accurately using the world's most powerful nuclear reactor complex; Kashiwazaki-Kariwa nuclear power station. KASKA utilizes near and far detectors of identical structure at nearly optimized baselines and underground depths to cancel most of the systematics and reduce backgrounds. The expected sensitivity is sin^2 2theta_13~0.015, which is 10 times better sensitivity than the current upper limit measured by CHOOZ reactor experiment. Extension of KASKA project has potential to accurately measure other anti-nu_e oscillation parameters. Intense and precisely known neutrino flux measured by the KASKA-theta_13 phase can be used to pin down sin^2 2theta_12 at a baseline ~50km and to measure Dm^2_13 for the first time at a baseline ~5km. This Letter of Intent describes physics motivation, detector system and expected performance of the KASKA experiment.

hep-ex↗

arXiv2003

The Data Acquisition System Based on PMC Bus

High energy physics experiments in KEK/Japan rush into over KHz trigger stage. Thus, we need a successor of the data acquisition(DAQ) system that replaces the CAMAC or FASTBUS systems. To meet these needs, we have developed a DAQ system which includes a crate, base-board modules, daughter cards for front-end A/D or T/D conversion, and back-end communication cards for data transfer and timing control. The size of the crate is for the 9U Euro-cards with the standard VME32 bus and extension connectors for power supply. The base-board comprises of a local bus with the sequencer connected to the front-end daughter cards via event buffering FIFOs, and the standard PMC (PCI mezzanine card) bus to be set a PMC processor unit to reduce data size from the front-end daughter cards. A data transfer module, which is connected to the event building system, and a trigger control unit, which communicates with the central timing controller are installed on the back-end communication card connected to the rear end of the base-board. We describe the design of this DAQ system and evaluate the performance of it.

physics.ins-det↗

arXiv2003

Development of a PCI Based Data Acquisition Platform for High Intensity Accelerator Experiments

Data logging at an upgraded KEKB accelerator or the J-PARC facility, currently under commission, requires a high density data acquisition platform with integrated data reduction CPUs. To follow market trends, we have developed a DAQ platform based on the PCI bus, a choice which permits a fast DAQ and a long expected lifetime of the system. The platform is a 9U-VME motherboard consisting of four slots for signal digitization modules, readout FIFOs for data buffering, and three PMC slots, on one of which resides a data reduction CPU. We have performed long term and thermal stability tests. The readout speed on the platform has been measured up to 125 MB/s in DMA mode.

hep-ex↗