arXiv subjects

Y. T. Song

Publications and source records attributed to Y. T. Song.

8 recordsLinked to original sources

arXiv2026

Boronization-enabled I-mode on EAST tokamak with an expanded density window and favorable-configuration access

I-mode is a promising confinement regime for future fusion reactors because it combines enhanced energy confinement with L-mode-like particle transport and naturally ELM-free operation. Previous EAST I-mode studies were performed exclusively under lithium-conditioned wall conditions. Here we report the first systematic experimental investigation of I-mode under boronized wall conditions on EAST and compare it with an existing lithium-conditioned I-mode database at the same toroidal field, $B_t = 2.47$\,T. The boronized-wall dataset exhibits a substantially broader accessible density range, with the Greenwald fraction extending from $f_{\mathrm{GW}} = 0.26 - 0.77$ , compared with $f_{\mathrm{GW}} = 0.35 - 0.54$ under lithiation. A higher normalized $\mathrm{D}_\alpha$ emission suggests that enhanced edge recycling may contribute to this density extension. A striking increase in favorable-configuration I-mode is also observed: $51\%$ boronized-wall discharges are obtained in favorable-configuration, compared with only $8\%$ lithium-conditioned discharges. These favorable-configuration cases are concentrated at high density and exhibit a deeper radial electric-field($E_r$) well and stronger $\mathbf{E_r}\times\mathbf{B}$ velocity shear. When ETRO is present, the associated transition between electron and ion turbulence is similar under the two wall conditions, although ETRO occurs less frequently ($15\%$) under boronization. An empirical EAST I-mode energy confinement scaling at fixed $B_t$ is obtained, $\tau_E = 3.29 I_p^{0.51 \pm 0.10} P_{\mathrm{loss}}^{-0.53 \pm 0.05} \bar{n}_e^{0.08 \pm 0.07}$, indicating weaker power degradation than IPB98(y,2) H-mode scaling and a weak density dependence. These results show that boronization can broaden the operational space of EAST I-mode and support the development of reactor-relevant ELM-free scenarios.

physics.plasm-ph↗

arXiv2024

I-mode Plasma Confinement Improvement by Real-time Lithium Injection and its Classification on EAST Tokamak

I-mode is a promising regime for future fusion reactors due to the high energy confinement and the moderate particle confinement. However, the effect of lithium, which has been widely applied for particle recycling and impurity control, on I-mode plasma is still unclear. Recently, experiments of real-time lithium powder injection on I-mode plasma have been carried out in EAST Tokamak. It was found that the confinement performance of the I-mode can be improved by the lithium powder injection, which can strongly reduce electron turbulence (ET) and then trigger ion turbulence (IT). Four different regimes of I-mode have been identified in EAST. The Type I I-mode plasma is characterized by the weakly coherent mode (WCM) and the geodesic-acoustic mode (GAM). The Type II I-mode is featured as the WCM and the edge temperature ring oscillation (ETRO). The Type III I-mode corresponds to the plasma with the co-existence of ETRO, GAM, and WCM. The Type IV I-mode denotes the plasma with only WCM but without ETRO and GAM. It has been observed that WCM and ETRO are increased with lithium powder injection due to the reduction of ion and electron turbulence, and the enhancement of the pedestal electron temperature gradient. EAST experiments demonstrate that lithium powder injection is an effective tool for real-time control and confinement improvement of I-mode plasma.

physics.plasm-ph↗

arXiv2023

Characteristics of the edge temperature ring oscillation during stationary improved confnement mode in EAST

I-mode is a natural ELMy-free regime with H-mode like improved energy confnement and L-mode like particle confnement, making it an attractive scenario for future tokamak based fusion reactors. A kind of low frequency oscillation was widely found and appeared to be unique in I-mode, with the frequency between stationary zonal flow and geodesic-acoustic mode (GAM) zonal flow. In EAST, 90 percent I-mode shots have such mode, called edge temperature ring oscillation (ETRO). The mode probably plays an important role during I-mode development and sustainment, while investigations are needed to clarify the differences between ETRO and the similar mode named as low frequency edge oscillation (LFEO) in AUG and C-Mod, especially whether it is still GAM. In the paper, the ETRO characteristics in EAST were investigated in detail and most do not agree with GAM, including that 1) during L-I transition with edge Te and Ti both increasing, ETRO has a smaller frequency than GAM; 2) ETRO has distinct harmonics in various diagnostics; 3) The magnetic component of ETRO is dominated by m = 1 structure; 4) ETRO is accompanied by turbulence transition between electron-scale and ion-scale; 5) As I-mode approaching to H-mode, ETRO frequency would decrease rapidly with Te increasing. These features imply that ETRO is probably caused by the stationary zonal flow with fnite frequency. Moreover, other damping mechanisms need to be involved besides collision in the Imode edge region. It was found that modest fueling could decrease the ETRO intensity with the I-mode confnement sustaining, suggesting that supersonic molecular beam injection (SMBI) could be used as an effective tool to control ETRO.

physics.plasm-ph↗

arXiv2022

Characterization of Pedestal Burst Instabilities during I-mode to H-mode Transition in the EAST Tokamak

Quasi-periodic Pedestal Burst Instabilities (PBIs), featuring alternative turbulence suppression and bursts, have been clearly identified by various edge diagnostics during I-mode to H-mode transition in the EAST Tokamak. The radial distribution of the phase perturbation caused by PBI shows that PBI is localized in the pedestal. Prior to each PBI, a significant increase of density gradient close to the pedestal top can be clearly distinguished, then the turbulence burst is generated, accompanied by the relaxation of the density profile, and then induces an outward particle flux. The relative density perturbation caused by PBIs is about $6 \sim 8\%$. Statistic analyses show that the pedestal normalized density gradient triggering the first PBI has a threshold value, mostly in the range of $22 \sim 24$, suggesting that a PBI triggering instability could be driven by the density gradient. And the pedestal normalized density gradient triggering the last PBI is about $30 \sim 40$ and seems to increase with the loss power and the chord-averaged density. In addition, the frequency of PBI is likely to be inversely proportional to the chord-averaged density and the loss power. These results suggest that PBIs and the density gradient prompt increase prior to PBIs can be considered as the precursor for controlling I-H transition.

physics.plasm-ph↗

arXiv2019

Single crystal growth and magnetoresistivity study of topological semimetal CoSi

We report single crystal growth of CoSi, which has recently been recognized as a new type of topological semimetal hosting fourfold and sixfold degenerate nodes. The Shubnikov-de Haas quantum oscillation (QO) is observed on our crystals. There are two frequencies originating from almost isotropic bulk electron Fermi surfaces, in accordance with band structure calculations. The effective mass, scattering rate, and QO phase difference of the two frequencies are extracted and discussed.

cond-mat.mtrl-sci↗

arXiv2019

Characterizations of thermal stability and electrical performance of Au-Ni coating on CuCrZr substrate for high vacuum radio-frequency contact application

Radio-frequency (RF) contacts-which are an example of electrical contacts-are commonly employed on accelerators and nuclear fusion experimental devices. RF contacts with a current load of 2 kA for steady-state operation were designed for application to the International Thermonuclear Experimental Reactor (ITER) device. In contrast to the typical working conditions of general commercial electrical contacts, those of RF contacts employed on fusion devices include high vacuum, high temperature, and neutron radiation. CuCrZr is currently of interest as a base material for the manufacture of louvers of RF contacts, which has excellent thermal and electrical properties and has low creep rate at 250 {\textdegree}C. In this study, a hard Au coating (Au-Ni) was electroplated on CuCrZr samples and the samples were then subjected to thermal aging treatment at 250 {\textdegree}C for 500 h in order to simulate the vacuum-commissioning process of the ITER. The effects of thermal aging on the hardness, elastic modulus, crystallite size, and compositions of the coating were investigated via microstructural and mechanical characterizations of the coating material. Metal atom migration in different coating layers during thermal aging was characterized and evaluated via scanning electron microscopy/energy dispersive X-ray spectroscopy observations of the cross-sectional surfaces, and the obtained results could be used to directly select the coating thickness for the final RF contact component. The contact resistance-an important parameter of the RF contact-was measured in a dedicated testbed built to simulate fusion reactor conditions between CuCrZr pins and stainless steel plates coated with Au-Ni and Rh, respectively.

physics.app-ph↗

arXiv2014

Pressure-induced phase transition and superconductivity in YBa2Cu4O8

We investigate the pressure and temperature dependence of the lattice dynamics of the underdoped, stoichiometric, high temperature superconductor YBa2Cu4O8 by means of Raman spectroscopy and ab initio calculations. This system undergoes a reversible pressure-induced structural phase transition around 10 GPa to a collapsed orthorhombic structure, that is well reproduced by the calculation. The coupling of the B1g-like buckling phonon mode to the electronic continuum is used to probe superconductivity. In the low pressure phase, self-energy effects through the superconducting transition renormalize this phonon, and the amplitude of this renormalization strongly increases with pressure. Whereas our calculation indicates that this mode's coupling to the electronic system is only marginally affected by the structural phase transition, the aforementioned renormalization is completely suppressed in the high pressure phase, demonstrating that under hydrostatic pressures higher than 10 GPa, superconductivity in YBa2Cu4O8 is greatly weakened or obliterated.

cond-mat.supr-con↗

arXiv2011

Intense paramagnon excitations in a large family of high-temperature superconductors

In the search for the mechanism of high-temperature superconductivity, intense research has been focused on the evolution of the spin excitation spectrum upon doping from the antiferromagnetic insulating to the superconducting states of the cuprates. Because of technical limitations, the experimental investigation of doped cuprates has been largely focused on low-energy excitations in a small range of momentum space. Here we use resonant inelastic x-ray scattering to show that a large family of superconductors, encompassing underdoped YBa$_2$Cu$_4$O$_8$ and overdoped YBa$_2$Cu$_3$O$_{7}$, exhibits damped spin excitations (paramagnons) with dispersions and spectral weights closely similar to those of magnons in undoped cuprates. %The results are in excellent agreement with the spin excitations obtained by exact diagonalization of the $\bf t-J$ Hamiltonian on finite-sized clusters. The comprehensive experimental description of this surprisingly simple spectrum permits quantitative tests of magnetic Cooper pairing models. A numerical solution of the Eliashberg equations for the magnetic spectrum of YBa$_2$Cu$_3$O$_{7}$ reproduces its superconducting transition temperature within a factor of two, a level of agreement comparable to Eliashberg theories of conventional superconductors.

cond-mat.supr-con↗