arXiv subjects

Yan Bao

Publications and source records attributed to Yan Bao.

6 recordsLinked to original sources

arXiv2025

Wake dynamics of finite-aspect-ratio rotating circular cylinders at low Reynolds number

We perform direct numerical simulations of flows over finite-aspect-ratio rotating circular cylinders at a Reynolds number of 150 over a range of aspect ratios ($AR=2-12$) and rotation rates ($\alpha=0-5$), aiming at revealing the free-end effects on the wake dynamics and aerodynamic performance. As a direct consequence of lift generation, a pair of counter-rotating tip vortices is formed at the free ends. At low rotation rates, the finite rotating cylinder behaves like a typical bluff body that generates unsteady vortex shedding with three-dimensional modal structures. Such unsteady flows can be stabilized not only by increasing rotation rate that weakens the free shear layer, but also by decreasing aspect ratio which enhances the tip-vortex-induced downwash. A further increase of $\alpha$ triggers the onset of unsteadiness in the tip vortices. At still higher rotation rates, the C-shaped Taylor-like vortices bounded on the cylinder surface emerge from the free ends and propel towards the midspan due to the self-induced velocity by vortex-wall interaction. With increasing $\alpha$, the free-end effects penetrate to the inboard span, leading to reduced lift and elevated drag compared to the two-dimensional flows. The three-dimensional end effects can be effectively suppressed by the addition of end plates, which position the tip vortices away from the cylinder, thereby significantly improving the aerodynamic performance. This study reveals the mechanisms for the formation of three-dimensional wakes under the influence of the free ends of finite rotating cylinders. The insights obtained here can serve as a stepping stone for understanding the complex high-$Re$ flows that are more relevant to industrial applications.

physics.flu-dyn↗

arXiv2022

End boundary effects on wakes dynamics of inclined circular cylinders

We perform direct numerical simulations to characterize the three-dimensional wake dynamics of long inclined circular cylinders with inhomogeneous end boundary conditions. Three Reynolds numbers, $\Rey=100$, 200 and 300 are considered to reveal the roles of the intrinsic secondary instabilities and the extrinsic end boundary effects in shaping the three-dimensional flows. At $\Rey=100$, the end boundary effects are felt over the entire cylinder span by inducing oblique vortex shedding, which is associated with stronger spanwise flow in the wake than a parallel shedding. The Strouhal number of the oblique shedding is related to that of the parallel shedding of straight cylinder by the cosine law, considering the combined inclination angle and oblique angle. At $\Rey=200$, the intrinsic secondary instability results in large-scale vortex dislocation, precluding the propagation of the end boundary effects towards further span. Nevertheless, for the inclined cases, oblique shedding is still observed within limited span from the upstream end boundary. The oblique vortices are related to the two-dimensional flow at $\Rey=200$ from the viewpoint of cosine law. Further along the span, the oblique vortices destabilizes with the formation of small-scale vortices, and the flow transitions to the typical mode A* wake. At $\Rey=300$, the highly three-dimensional flow near the end boundary creates disturbances that travel along the cylinder span, creating vortex dislocations for cases with low inclination angles. For high inclination angle, oblique vortex shedding is again observed over the cylinder span, and is not disrupted by vortex dislocations of either intrinsic or extrinsic causes.

physics.flu-dyn↗

arXiv2022

Analyses of Some Structural Properties on a Class of Hierarchical Scale-free Networks

Hierarchical networks actually have many applications in the real world. Firstly, we propose a new class of hierarchical networks with scale-free and fractal structure, which are the networks with triangles compared to traditional hierarchical networks. Secondly, we study the precise results of some structural properties to derive small-world effect and scale-free feature. Thirdly, it is found that the constructed network is sparse through the average degree and density. Fourthly, it is also demonstrated the degree distributions of hub nodes and the bottom nodes are the power law and exponential, respectively. Finally, we prove that clustering coefficient with a definite value z tends to stabilize at a lower bound as t iterates to a certain number, and the average distance of G_{t}^{z} has a increasing relationship along with the value of lnN_{t}.

math.CO↗

arXiv2021

Turbulence suppression by streamwise-varying wall rotation in pipe flow

Direct numerical simulations (DNSs) of turbulent pipe flow subjected to streamwise-varying wall rotation are performed. This control method is able to achieve drag reduction and even relaminarize the flow under certain control parameters at low Reynolds number. Two control parameters, which are velocity amplitude and wavelength, are considered. An annular boundary layer, called Spatial Stokes Layer (SSL), is formed by the wall rotation. Based on the thickness of SSL, two types of drag reduction scenarios are identified. When the thickness is low, the SSL acts as a spacer layer, obstructing the impact of fluids against the wall and hence reducing the shear stress. The flow structures in the outer layer are less affected and are stretched in streamwise direction due to the increased velocity gradient. Within the SSL, the turbulence intensity diminishes dramatically. When the thickness is large, a streamwise wavy pattern of near-wall low-speed streaks is formed. The orientation of streaks is found to lag behind the direction of local mean velocity in phase and conform to the direction of local resultant shear stress. The streamwise scale of near-wall flow structures is significantly reduced, resulting in the disruption of downstream development of flow structures and hence leading to the drag reduction. Besides, it is found that it requires both large enough thickness of SSL and velocity amplitude to relaminarize the turbulence. The relaminarization mechanism is that the annular SSL can continuously absorb energy from wall-normal stress due to the rotation effect, thereby the turbulence self-sustaining process could not be maintained. For the relaminarization cases, the laminar state is stable to even extremely large perturbations, which possibly makes laminar state the only fixed point for the whole system.

physics.flu-dyn↗

arXiv2019

Nektar++: enhancing the capability and application of high-fidelity spectral/$hp$ element methods

Nektar++ is an open-source framework that provides a flexible, high-performance and scalable platform for the development of solvers for partial differential equations using the high-order spectral/$hp$ element method. In particular, Nektar++ aims to overcome the complex implementation challenges that are often associated with high-order methods, thereby allowing them to be more readily used in a wide range of application areas. In this paper, we present the algorithmic, implementation and application developments associated with our Nektar++ version 5.0 release. We describe some of the key software and performance developments, including our strategies on parallel I/O, on in situ processing, the use of collective operations for exploiting current and emerging hardware, and interfaces to enable multi-solver coupling. Furthermore, we provide details on a newly developed Python interface that enables a more rapid introduction for new users unfamiliar with spectral/$hp$ element methods, C++ and/or Nektar++. This release also incorporates a number of numerical method developments - in particular: the method of moving frames, which provides an additional approach for the simulation of equations on embedded curvilinear manifolds and domains; a means of handling spatially variable polynomial order; and a novel technique for quasi-3D simulations to permit spatially-varying perturbations to the geometry in the homogeneous direction. Finally, we demonstrate the new application-level features provided in this release, namely: a facility for generating high-order curvilinear meshes called NekMesh; a novel new AcousticSolver for aeroacoustic problems; our development of a 'thick' strip model for the modelling of fluid-structure interaction problems in the context of vortex-induced vibrations. We conclude by commenting some directions for future code development and expansion.

cs.MS↗

arXiv2019

Bistability in the wake of a wavy cylinder

We investigate the wake dynamics of an optimally designed wavy cylinder that completely suppresses the Kármán vortex shedding. Such a wavy cylinder is forced to oscillate with a sinusoidal motion in the crossflow direction. Examination of the lift force spectrum reveals that a critical forcing frequency exists, below which the flow control effectiveness of the wavy cylinder is retained, and beyond which the inherent vortex shedding resurrects. Moreover, the resurrected unsteady vortex shedding can persist even without sustained forcing, leading to the loss of control efficacy. This suggests that in addition to the steady state developed from uniform initial condition, an oscillatory state exists in the wake of wavy cylinder if the initial state is sufficiently perturbed. The discovery of the bistable states calls for examination of the flow control effectiveness of the wavy cylinder in more complicated inflow conditions.

physics.flu-dyn↗