Searcharxiv⌕ Search

arXiv subjects

Yan Li

Publications and source records attributed to Yan Li.

At least 271 records · Page 15Linked to original sources

Center-Sensitive Kernel Optimization for Efficient On-Device Incremental Learning

To facilitate the evolution of edge intelligence in ever-changing environments, we study on-device incremental learning constrained in limited computation resource in this paper. Current on-device training methods just focus on efficient training without considering the catastrophic forgetting, preventing the model getting stronger when continually exploring the world. To solve this problem, a direct solution is to involve the existing incremental learning mechanisms into the on-device training framework. Unfortunately, such a manner cannot work well as those mechanisms usually introduce large additional computational cost to the network optimization process, which would inevitably exceed the memory capacity of the edge devices. To address this issue, this paper makes an early effort to propose a simple but effective edge-friendly incremental learning framework. Based on an empirical study on the knowledge intensity of the kernel elements of the neural network, we find that the center kernel is the key for maximizing the knowledge intensity for learning new data, while freezing the other kernel elements would get a good balance on the model's capacity for overcoming catastrophic forgetting. Upon this finding, we further design a center-sensitive kernel optimization framework to largely alleviate the cost of the gradient computation and back-propagation. Besides, a dynamic channel element selection strategy is also proposed to facilitate a sparse orthogonal gradient projection for further reducing the optimization complexity, upon the knowledge explored from the new task data. Extensive experiments validate our method is efficient and effective, e.g., our method achieves average accuracy boost of 38.08% with even less memory and approximate computation compared to existing on-device training methods, indicating its significant potential for on-device incremental learning.

cs.LG↗

Nagaoka Ferromagnetism in $3 \times 3$ Arrays and Beyond

Nagaoka ferromagnetism (NF) is a long-predicted example of itinerant ferromagnetism (IF) in the Hubbard model that has been studied theoretically for many years. The condition for NF, an infinite on-site Coulomb repulsion and a single hole in a half-filled band, does not arise naturally in materials. NF was only realized recently for the first time in experiments on a $2\times 2$ array of gated quantum dots. Dopant arrays and gated quantum dots in Si allow for engineering controllable systems with complex geometries. This makes quantum dot arrays good candidates to study NF in different geometries through analog quantum simulation. Here we present theoretical simulations done for $3\times 3$ arrays and larger $N\times N$ arrays, and predict the emergence of different forms of ferromagnetism in different geometries. We find NF in perfect $3\times 3$ arrays, and in $N\times N$ arrays for one hole doping of a half-filled band. The ratio of the hopping $t$ to Hubbard on-site repulsion $U$ that defines the onset of NF scales as $1/N^{4}$ as $N$ increases, approaching the bulk limit of infinite $U$ for large $N$. Additional simulations are done for geometries made by removing sites from $N\times N$ arrays. Different forms of ferromagnetism are found for different geometries. Loops show ferromagnetism, but only for three electrons. For loops, the critical $t/U$ for the onset of ferromagnetism scales as $N$ as the loop length increases. We show that the different dependences on size for loops and $N\times N$ arrays can be understood by scaling arguments that highlight the different energy contributions to each form of ferromagnetism. Our results show how analog quantum simulation with small arrays can elucidate the role of effects including wavefunction connectivity; system geometry, size and symmetry; bulk and edge sites; and kinetic energy in determining quantum magnetism of small systems.

cond-mat.mes-hall↗

Exploring the convective core of the high-amplitude $δ$ Scuti star TIC 120857354 with asteroseismology

Based on 2-minute cadence TESS data, 20 confident independent frequencies were identified for the star TIC 120857354. The Kolmogorov-Smirnov test reveals a rotational splitting of 2.40 $μ$Hz and a uniform frequency spacing of 74.6 $μ$Hz. Subsequently, five sets of rotational splittings were discerned, including a quintuplet and four pairs of doublets, aligning with the characteristics of p-mode rotational splitting. Based on the sets of rotational splittings and the uniform frequency spacing, we finally identified 4 radial modes, 6 dipole modes, and 10 quadrupole modes. Furthermore, we found that the frequency separations within the $\ell$ = 2 sequences show a decreasing trend towards lower-order modes, analogous to the $\ell$ = 0 sequences. A grid of theoretical models were computed to match the identified frequencies, revealing that TIC 120857354 is a main-sequence star with $M$ = 1.54 $\pm$ 0.04 $M_{\odot}$, $Z$ = 0.015 $\pm$ 0.003, $T_{\rm eff}$ = 7441 $\pm$ 370 K, $\log g$ = 4.27 $\pm$ 0.01, $R$ = 1.52 $\pm$ 0.01 $R_{\odot}$, $L$ = 6.33 $\pm$ 1.53 $L_{\odot}$, age = 0.53 $\pm$ 0.07 Gyr, and $X_c/X_0$ = 0.84 $\pm$ 0.05. In-depth analyses suggest that $\ell$ = 2 may be p-dominated mixed modes with pronounced g-mode characteristics, enabling us to probe deeper into interiors of the star and determine the relative size of the convective core to be $R_c/R$ = 0.092 $\pm$ 0.002.

astro-ph.SR↗

AlignMamba: Enhancing Multimodal Mamba with Local and Global Cross-modal Alignment

Cross-modal alignment is crucial for multimodal representation fusion due to the inherent heterogeneity between modalities. While Transformer-based methods have shown promising results in modeling inter-modal relationships, their quadratic computational complexity limits their applicability to long-sequence or large-scale data. Although recent Mamba-based approaches achieve linear complexity, their sequential scanning mechanism poses fundamental challenges in comprehensively modeling cross-modal relationships. To address this limitation, we propose AlignMamba, an efficient and effective method for multimodal fusion. Specifically, grounded in Optimal Transport, we introduce a local cross-modal alignment module that explicitly learns token-level correspondences between different modalities. Moreover, we propose a global cross-modal alignment loss based on Maximum Mean Discrepancy to implicitly enforce the consistency between different modal distributions. Finally, the unimodal representations after local and global alignment are passed to the Mamba backbone for further cross-modal interaction and multimodal fusion. Extensive experiments on complete and incomplete multimodal fusion tasks demonstrate the effectiveness and efficiency of the proposed method.

cs.CV↗

Chirality-Dependent Kinetics of Single-Walled Carbon Nanotubes from Machine-Learning Force Fields

The origin of the chirality of single-walled carbon nanotubes (SWCNTs) has been a long-standing dispute. Molecular dynamics (MD) simulations driven by machine-learning force fields (MLFF), which can study the interface dynamics under near ab-initio accuracy, provides a powerful technique to reveal the formation mechanism of SWCNTs. Here, we develop a cobalt-carbon MLFF and perform growth simulations on a cobalt catalyst to investigate the chirality preference of the growth of SWCNTs under the vapor-liquid-solid (VLS) regime. Through microkinetic modeling, we reproduce the observed growth and defect kinetics, demonstrating their dependence on the chirality. It is observed that while the initial chirality assignment is likely related to the configurational degeneracy of the nanotube caps, pentagon defects immediately form and resolve after nucleation. Such processes, which we name as diameter control mechanisms, not only control the diameter toward an optimum but also shift the chirality distribution drastically. Our work therefore offers a microkinetic modeling workflow for the chirality-dependent kinetics of the SWCNTs, highlighting the important contribution of the defect kinetics to the chirality origination.

cond-mat.mes-hall↗

Enhancing Instruction-Following Capability of Visual-Language Models by Reducing Image Redundancy

Large Language Models (LLMs) have strong instruction-following capability to interpret and execute tasks as directed by human commands. Multimodal Large Language Models (MLLMs) have inferior instruction-following ability compared to LLMs. However, there is a significant gap in the instruction-following capabilities between the MLLMs and LLMs. In this study, we conduct a pilot experiment, which demonstrates that spatially down-sampling visual tokens significantly enhances the instruction-following capability of MLLMs. This is attributed to the substantial redundancy in visual modality. However, this intuitive method severely impairs the MLLM's multimodal understanding capability. In this paper, we propose Visual-Modality Token Compression (VMTC) and Cross-Modality Attention Inhibition (CMAI) strategies to alleviate this gap between MLLMs and LLMs by inhibiting the influence of irrelevant visual tokens during content generation, increasing the instruction-following ability of the MLLMs while retaining their multimodal understanding capacity. In VMTC module, the primary tokens are retained and the redundant tokens are condensed by token clustering and merging. In CMAI process, we aggregate text-to-image attentions by text-to-text attentions to obtain a text-to-image focus score. Attention inhibition is performed on the text-image token pairs with low scores. Our comprehensive experiments over instruction-following capabilities and VQA-V2, GQA, TextVQA, MME and MMBench five benchmarks, demonstrate that proposed strategy significantly enhances the instruction following capability of MLLMs while preserving the ability to understand and process multimodal inputs.

cs.CV↗

Investigation of pion-nucleon contributions to nucleon matrix elements

We investigate contributions of excited states to nucleon matrix elements computed in lattice QCD by employing, in addition to the standard nucleon interpolating operator, pion-nucleon ($π$-$N$) operators. We solve a generalized eigenvalue problem (GEVP) to obtain an optimal interpolating operator that minimizes overlap with the $π$-$N$ states. We derive a variant of the standard application of the GEVP method, which allows for constructing 3-point correlation functions using the optimized interpolating operator without requiring the computationally demanding combination that includes $π$-$N$ operators in both sink and source. We extract nucleon matrix elements using two twisted mass fermion ensembles, one ensemble generated using pion mass of 346 MeV and one ensemble tuned to reproduce the physical value of the pion mass. Especially, we determine the isoscalar and isovector scalar, pseudoscalar, vector, axial, and tensor matrix elements. We include results obtained using a range of kinematic setups, including momentum in the sink. Our results using this variational approach are compared with previous results obtained using the same ensembles and multi-state fits without GEVP improvement. We find that for the physical mass point ensemble, the improvement, in terms of suppression of excited states using this method, is most significant for the case of the matrix elements of the isovector axial and pseudoscalar currents.

hep-lat↗

Quantum synchronization in an all-optical stroboscopic quantum simulator

In this work, we propose an all-optical stroboscopic scheme to simulate an open quantum system. By incorporating the tritter, consisting of a group of beam splitters, we find the emergence of spontaneous anti-phase synchronization in the steady state. To better understand the synchronization and entanglement properties within the system, we utilize the relative error measure and find the distribution of logarithmic negativity in parameter space shows similar structures with the results of synchronization measure. Finally, we derive the adjoint master equation corresponding to the system when the synchronization condition is satisfied and explain the existence of oscillations. In addition, we explore the effect of non-Markovianity on synchronization, and we find that it only slows down the time for the system to reach the steady state but does not change the synchronization properties of the steady state. Our work provides a promising scheme for experimental studies focused on synchronization and other nonequilibrium steady states.

quant-ph↗

Revealing subterahertz atomic vibrations in quantum paraelectrics by surface-sensitive spintronic terahertz spectroscopy

Understanding surface collective dynamics in quantum materials is crucial for advancing quantum technologies. For example, surface phonon modes in quantum paraelectrics are thought to play an essential role in facilitating interfacial superconductivity. However, detecting these modes, especially below 1 terahertz (THz), is challenging due to limited sampling volumes and the need for high spectroscopic resolution. Here, we report surface soft transverse optical (TO1) phonon dynamics in KTaO3 and SrTiO3 by developing surface-sensitive spintronic THz spectroscopy that can sense the collective modes only a few nanometers deep from the surface. In KTaO3, the TO1 mode softens and sharpens with decreasing temperature, leveling off at 0.7 THz. In contrast, this mode in SrTiO3 broadens significantly below the quantum paraelectric crossover and coincides with the hardening of a sub-meV phonon mode related to the antiferrodistortive transition. These observations that deviate from their bulk properties may have implications for interfacial superconductivity and ferroelectricity. The developed technique opens opportunities for sensing low-energy surface excitations.

cond-mat.mtrl-sci↗

Toward Open Vocabulary Aerial Object Detection with CLIP-Activated Student-Teacher Learning

An increasingly massive number of remote-sensing images spurs the development of extensible object detectors that can detect objects beyond training categories without costly collecting new labeled data. In this paper, we aim to develop open-vocabulary object detection (OVD) technique in aerial images that scales up object vocabulary size beyond training data. The performance of OVD greatly relies on the quality of class-agnostic region proposals and pseudo-labels for novel object categories. To simultaneously generate high-quality proposals and pseudo-labels, we propose CastDet, a CLIP-activated student-teacher open-vocabulary object Detection framework. Our end-to-end framework following the student-teacher self-learning mechanism employs the RemoteCLIP model as an extra omniscient teacher with rich knowledge. By doing so, our approach boosts not only novel object proposals but also classification. Furthermore, we devise a dynamic label queue strategy to maintain high-quality pseudo labels during batch training. We conduct extensive experiments on multiple existing aerial object detection datasets, which are set up for the OVD task. Experimental results demonstrate our CastDet achieving superior open-vocabulary detection performance, e.g., reaching 46.5% mAP on VisDroneZSD novel categories, which outperforms the state-of-the-art open-vocabulary detectors by 21.0% mAP. To our best knowledge, this is the first work to apply and develop the open-vocabulary object detection technique for aerial images. The code is available at https://github.com/lizzy8587/CastDet.

cs.CV↗

Spin-layer coupling in altermagnets multilayer: a design principle for spintronics

The discovery of collinear symmetric-compensated altermagnets (AM) with intrinsic spin splitting provides a route towards energy-efficient and ultrafast device applications. Here, using first-principles calculations and symmetry analysis, we propose a series of AM Cr2SX (X=O, S, Se) monolayer and explore the spin splitting in Cr2SX multilayer. A general design principle for realizing the spin-layer coupling in odd/even-layer is mapped out based on the comprehensive analysis of spin group symmetry. The spin splitting behavior related with the MzUt, Mz and ML symmetries in AM multilayer can be significantly modulated by magnetic orders, crystal symmetry and external perpendicular gate field (Ez). Due to the spin-compensated bands of sublayers linked by overall Mz and interlayers ML symmetries, the Cr2S2 odd-layer exhibits the unique coexistence of spin splitting and spin degeneracy at high symmetric paths and X/Y valley, respectively. Furthermore, owing to the higher priority of overall ML symmetry compared to interlayers ML symmetry in AM even-layer, the spin-layer coupling of AM multilayer shows strong odd/even-layer dependence. Our work not only offer a new direction for manipulating spin splitting, but also greatly enrich the research on AM monolayer and multilayer.

physics.app-ph↗

Piezoelectric Manipulation and Engineering for Layertronics in Two-Dimensional Materials

The electronic transport characteristics of two-dimensional (2D) systems have widespread application prospects in the fabrication of multifunctional nanodevices. However, the current research for basic transport phenomena, such as anomalous valley Hall effect (AVHE) and piezoelectric response, is limited to discrete discussion. Here, we theoretically propose a valley-piezoelectricity coupling strategy beyond the existing paradigm to realize AVHE and layer Hall effect (LHE) in ferrovalley (FV) systems, and its essential principle can be extended to general valleytronic materials. Through first-principles calculations, we demonstrate that the large polarized electric field of 2.8*106 (1.67*107) V/m can be induced by 0.1% uniaxial strain in FV 2H-LaHF (1T-LaHF) monolayers. In addition, the microscopic mechanism of interlayer antiferromagnetic (AFM) state of 2H-LaHF bilayer is uncovered by the spin Hamiltonian and super-superexchange (SSE) interaction. Our findings pave the way for new explorations of valley Hall-related effect involving piezoelectricity.

cond-mat.mes-hall↗

Approaching High-efficiency Spatial Light Modulation with Lossy Phase-change Material

The prevalent high intrinsic absorption in the crystalline state of phase-change materials (PCMs), typically leads to a decline in modulation efficiency for phase-change metasurfaces, underutilizing their potential for quasi-continuous phase-state tuning. This research introduces a concise design approach that maximizes the exploitation of the quasi-continuous phase transition properties of PCM, achieving high-efficiency spatial light modulation. By optimizing the metasurface design, the phase modulation process is strategically localized in a low crystallization ratio state, significantly reducing the impact of material absorption on modulation efficiency. Utilizing GSST as an example, numerical simulations demonstrate a minimum reflectance of 46.5% at the target wavelength of 1550 nm, with a phase modulation depth of 246.6°. The design is fruther extended to dynamic polarization modulation by incorporating structural anisotropy, enabling independent control of amplitude and phase modulation in orthogonal polarization directions. This strategy not only circumvents the efficiency limitations of crystalline states but also harnesses the full potential of PCMs for multifunctional photonic applications.

physics.optics↗

Possible way to achieve anomalous valley Hall effect by tunable intrinsic piezoelectric polarization in FeO$_2$SiGeN$_2$ monolayer

Valley-related multiple Hall effect and piezoelectric response are novel transport characteristics in low-dimensional system, however few studies have reported their coexistence in a single system as well as their coupling relationships. By first-principles calculations, we propose a multifunctional Janus semiconductor, i.e. FeO$_2$SiGeN$_2$ monolayer with large valley polarization of about 120 meV and in-plane piezoelectric polarization with d11 of -0.714.03 pm/V. The magnetic anisotropy energy can be significantly regulated by electronic correlation strength and strain, which can be attributed to the change of competition relationship about Fe-3d-resolved magnetic anisotropy energy brought about by external regulatory means. Electronic correlation strength can induce phase transitions in Janus FeO$_2$SiGeN$_2$ monolayer from ferrovalley to quantum anomalous Hall phase, while the half-valley metallic state as the boundary of the phase transition can gererate 100% spin- and valley polarization. The related phase transition mechanism is analyzed based on the two-band strained kp model. The presence of piezoelectric strain coefficients d11 in valleytronic material makes the coupling between charge degrees of freedom and valley degrees of freedom possible, and the intrinsic electric field caused by the in-plane piezoelectric response provide the way to realize piezoelectric anomalous valley Hall effect. This work may pave a way to find a new member of materials with valley-related multiple Hall effect and stimulate further experimental works related to valleytronics and piezotronics.

cond-mat.mes-hall↗

Distributionally robust stochastic optimal control

The main goal of this paper is to discuss the construction of distributionally robust counterparts of stochastic optimal control problems. Randomized and non-randomized policies are considered. In particular, necessary and sufficient conditions for the existence of non-randomized policies are given.

math.OC↗

Air-to-Ground Communications Beyond 5G: CoMP Handoff Management in UAV Network

Air-to-ground (A2G) networks, using unmanned aerial vehicles (UAVs) as base stations to serve terrestrial user equipments (UEs), are promising for extending the spatial coverage capability in future communication systems. Coordinated transmission among multiple UAVs significantly improves network coverage and throughput compared to a single UAV transmission. However, implementing coordinated multi-point (CoMP) transmission for UAV mobility requires complex cooperation procedures, regardless of the handoff mechanism involved. This paper designs a novel CoMP transmission strategy that enables terrestrial UEs to achieve reliable and seamless connections with mobile UAVs. Specifically, a computationally efficient CoMP transmission method based on the theory of Poisson-Delaunay triangulation is developed, where an efficient subdivision search strategy for a CoMP UAV set is designed to minimize search overhead by a divide-and-conquer approach. For concrete performance evaluation, the cooperative handoff probability of the typical UE is analyzed, and the coverage probability with handoffs is derived. Simulation results demonstrate that the proposed scheme outperforms the conventional Voronoi scheme with the nearest serving UAV regarding coverage probabilities with handoffs. Moreover, each UE has a fixed and unique serving UAV set to avoid real-time dynamic UAV searching and achieve effective load balancing, significantly reducing system resource costs and enhancing network coverage performance.

cs.IT↗

DVS: Blood cancer detection using novel CNN-based ensemble approach

Blood cancer can only be diagnosed properly if it is detected early. Each year, more than 1.24 million new cases of blood cancer are reported worldwide. There are about 6,000 cancers worldwide due to this disease. The importance of cancer detection and classification has prompted researchers to evaluate Deep Convolutional Neural Networks for the purpose of classifying blood cancers. The objective of this research is to conduct an in-depth investigation of the efficacy and suitability of modern Convolutional Neural Network (CNN) architectures for the detection and classification of blood malignancies. The study focuses on investigating the potential of Deep Convolutional Neural Networks (D-CNNs), comprising not only the foundational CNN models but also those improved through transfer learning methods and incorporated into ensemble strategies, to detect diverse forms of blood cancer with a high degree of accuracy. This paper provides a comprehensive investigation into five deep learning architectures derived from CNNs. These models, namely VGG19, ResNet152v2, SEresNet152, ResNet101, and DenseNet201, integrate ensemble learning techniques with transfer learning strategies. A comparison of DenseNet201 (98.08%), VGG19 (96.94%), and SEresNet152 (90.93%) shows that DVS outperforms CNN. With transfer learning, DenseNet201 had 95.00% accuracy, VGG19 had 72.29%, and SEresNet152 had 94.16%. In the study, the ensemble DVS model achieved 98.76% accuracy. Based on our study, the ensemble DVS model is the best for detecting and classifying blood cancers.

eess.IV↗

Motion Hologram: Jointly optimized hologram generation and motion planning for photorealistic and speckle-free 3D displays via reinforcement learning

Holography is capable of rendering three-dimensional scenes with full-depth control, and delivering transformative experiences across numerous domains, including virtual and augmented reality, education, and communication. However, traditional holography presents 3D scenes with unnatural defocus and severe speckles due to the limited space bandwidth product of the spatial light modulator (SLM). Here, we introduce Motion Hologram, a novel holographic technique to accurately portray photorealistic and speckle-free 3D scenes, by leveraging a single hologram and learnable motion trajectory, which are jointly optimized within the deep reinforcement learning framework. Specifically, we experimentally demonstrated the proposed technique could achieve a 4~5 dB PSNR improvement of focal stacks in comparison with traditional holography and could successfully depict speckle-free, high-fidelity, and full-color 3D displays using only a commercial SLM for the first time. We believe the proposed method promises a new form of holographic displays that will offer immersive viewing experiences for audiences.

physics.optics↗