arXiv subjects

Yan Zhu

Publications and source records attributed to Yan Zhu.

At least 55 records · Page 3Linked to original sources

arXiv2025

Sequence-Model-Guided Measurement Selection for Quantum State Learning

Characterization of quantum systems from experimental data is a central problem in quantum science and technology. But which measurements should be used to gather data in the first place? While optimal measurement choices can be worked out for small quantum systems, the optimization becomes intractable as the system size grows large. To address this problem, we introduce a deep neural network with a sequence model architecture that searches for efficient measurement choices in a data-driven, adaptive manner. The model can be applied to a variety of tasks, including the prediction of linear and nonlinear properties of quantum states, as well as state clustering and state tomography tasks. In all these tasks, we find that the measurement choices identified by our neural network consistently outperform the uniformly random choice. Intriguingly, for topological quantum systems, our model tends to recommend measurements at the system's boundaries, even when the task is to predict bulk properties. This behavior suggests that the neural network may have independently discovered a connection between boundaries and bulk, without having been provided any built-in knowledge of quantum physics.

quant-ph↗

arXiv2025

The Chinese Pulsar Timing Array data release I. Single pulsar noise analysis

The Chinese Pulsar Timing Array (CPTA) has collected observations from 57 millisecond pulsars using the Five-hundred-meter Aperture Spherical Radio Telescope (FAST) for close to three years, for the purpose of searching for gravitational waves (GWs). To robustly search for ultra-low-frequency GWs, pulsar timing arrays (PTAs) need to use models to describe the noise from the individual pulsars. We report on the results from the single pulsar noise analysis of the CPTA data release I (DR1). Conventionally, power laws in the frequency domain are used to describe pulsar red noise and dispersion measurement (DM) variations over time. Employing Bayesian methods, we found the choice of number and range of frequency bins with the highest evidence for each pulsar individually. A comparison between a dataset using DM piecewise measured (DMX) values and a power-law Gaussian process to describe the DM variations shows strong Bayesian evidence in favour of the power-law model. Furthermore, we demonstrate that the constraints obtained from four independent software packages are very consistent with each other. The short time span of the CPTA DR1, paired with the large sensitivity of FAST, has proved to be a challenge for the conventional noise model using a power law. This mainly shows in the difficulty to separate different noise terms due to their covariances with each other. Nineteen pulsars are found to display covariances between the short-term white noise and long-term red and DM noise. With future CPTA datasets, we expect that the degeneracy can be broken. Finally, we compared the CPTA DR1 results against the noise properties found by other PTA collaborations. While we can see broad agreement, there is some tension between different PTA datasets for some of the overlapping pulsars. This could be due to the differences in the methods and frequency range compared to the other PTAs.

astro-ph.HE↗

arXiv2025

Endo-CLIP: Progressive Self-Supervised Pre-training on Raw Colonoscopy Records

Pre-training on image-text colonoscopy records offers substantial potential for improving endoscopic image analysis, but faces challenges including non-informative background images, complex medical terminology, and ambiguous multi-lesion descriptions. We introduce Endo-CLIP, a novel self-supervised framework that enhances Contrastive Language-Image Pre-training (CLIP) for this domain. Endo-CLIP's three-stage framework--cleansing, attunement, and unification--addresses these challenges by (1) removing background frames, (2) leveraging large language models to extract clinical attributes for fine-grained contrastive learning, and (3) employing patient-level cross-attention to resolve multi-polyp ambiguities. Extensive experiments demonstrate that Endo-CLIP significantly outperforms state-of-the-art pre-training methods in zero-shot and few-shot polyp detection and classification, paving the way for more accurate and clinically relevant endoscopic analysis.

cs.CV↗

arXiv2025

The Chinese pulsar timing array data release I. Polarimetry for 56 millisecond pulsars

We present polarization pulse profiles for 56 millisecond pulsars (MSPs) monitored by the Chinese Pulsar Timing Array (CPTA) collaboration using the Five-hundred-meter Aperture Spherical radio Telescope (FAST). The observations centered at 1.25 GHz with a raw bandwidth of 500 MHz. Due to the high sensitivity ($\sim$16 K/Jy) of the FAST telescope and our long integration time, the high signal-to-noise ratio polarization profiles show features hardly detected before. Among 56 pulsars, the polarization profiles of PSRs J0406$+$3039, J1327$+$3423, and J2022$+$2534 were not previously reported. 80\% of MSPs in the sample show weak components below 3\% of peak flux, 25\% of pulsars show interpulse-like structures, and most pulsars show linear polarization position angle jumps. Six pulsars seem to be emitting for full rotation phase, with another thirteen pulsars being good candidates for such a 360$^\circ$ radiator. We find that the distribution of the polarization percentage in our sample is compatible with the normal pulsar distribution. Our detailed evaluation of the MSP polarization properties suggests that the wave propagation effects in the pulsar magnetosphere are important in shaping the MSP polarization pulse profiles.

astro-ph.HE↗

arXiv2025

Noise-Agnostic Quantum Error Mitigation with Data Augmented Neural Models

Quantum error mitigation, a data processing technique for recovering the statistics of target processes from their noisy version, is a crucial task for near-term quantum technologies. Most existing methods require prior knowledge of the noise model or the noise parameters. Deep neural networks have a potential to lift this requirement, but current models require training data produced by ideal processes in the absence of noise. Here we build a neural model that achieves quantum error mitigation without any prior knowledge of the noise and without training on noise-free data. To achieve this feature, we introduce a quantum augmentation technique for error mitigation. Our approach applies to quantum circuits and to the dynamics of many-body and continuous-variable quantum systems, accommodating various types of noise models. We demonstrate its effectiveness by testing it both on simulated noisy circuits and on real quantum hardware.

quant-ph↗

arXiv2025

Liquid Metal-Exfoliated SnO$_2$-Based Mixed-dimensional Heterostructures for Visible-to-Near-Infrared Photodetection

Ultra-thin two-dimensional (2D) materials have gained significant attention for making next-generation optoelectronic devices. Here, we report a large-area heterojunction photodetector fabricated using a liquid metal-printed 2D $\text{SnO}_2$ layer transferred onto CdTe thin films. The resulting device demonstrates efficient broadband light sensing from visible to near-infrared wavelengths, with enhanced detectivity and faster photo response than bare CdTe photodetectors. Significantly, the device shows a nearly $10^5$-fold increase in current than the dark current level when illuminated with a 780 nm laser and achieves a specific detectivity of around $10^{12} \, \text{Jones}$, nearly two orders of magnitude higher than a device with pure CdTe thin film. Additionally, temperature-dependent optoelectronic testing shows that the device maintains a stable response up to $140^\circ \text{C}$ and generates distinctive photocurrent at temperatures up to $80^\circ \text{C}$, demonstrating its thermal stability. Using band structure analysis, density functional theory (DFT) calculations, and photocurrent mapping, the formation of a $p$-$n$ junction is indicated, contributing to the enhanced photo response attributed to the efficient carrier separation by the built-in potential in the hetero-junction and the superior electron mobility of 2D $\text{SnO}_2$. Our results highlight the effectiveness of integrating liquid metal-exfoliated 2D materials for enhanced photodetector performance.

cond-mat.mtrl-sci↗

arXiv2025

Exploring Task-Level Optimal Prompts for Visual In-Context Learning

With the development of Vision Foundation Models (VFMs) in recent years, Visual In-Context Learning (VICL) has become a better choice compared to modifying models in most scenarios. Different from retraining or fine-tuning model, VICL does not require modifications to the model's weights or architecture, and only needs a prompt with demonstrations to teach VFM how to solve tasks. Currently, significant computational cost for finding optimal prompts for every test sample hinders the deployment of VICL, as determining which demonstrations to use for constructing prompts is very costly. In this paper, however, we find a counterintuitive phenomenon that most test samples actually achieve optimal performance under the same prompts, and searching for sample-level prompts only costs more time but results in completely identical prompts. Therefore, we propose task-level prompting to reduce the cost of searching for prompts during the inference stage and introduce two time-saving yet effective task-level prompt search strategies. Extensive experimental results show that our proposed method can identify near-optimal prompts and reach the best VICL performance with a minimal cost that prior work has never achieved.

cs.AI↗

arXiv2025

Spurious Feature Eraser: Stabilizing Test-Time Adaptation for Vision-Language Foundation Model

Vision-language foundation models have exhibited remarkable success across a multitude of downstream tasks due to their scalability on extensive image-text paired data. However, these models also display significant limitations when applied to downstream tasks, such as fine-grained image classification, as a result of ``decision shortcuts'' that hinder their generalization capabilities. In this work, we find that the CLIP model possesses a rich set of features, encompassing both \textit{desired invariant causal features} and \textit{undesired decision shortcuts}. Moreover, the underperformance of CLIP on downstream tasks originates from its inability to effectively utilize pre-trained features in accordance with specific task requirements. To address this challenge, we propose a simple yet effective method, Spurious Feature Eraser (SEraser), to alleviate the decision shortcuts by erasing the spurious features. Specifically, we introduce a test-time prompt tuning paradigm that optimizes a learnable prompt, thereby compelling the model to exploit invariant features while disregarding decision shortcuts during the inference phase. The proposed method effectively alleviates excessive dependence on potentially misleading spurious information. We conduct comparative analysis of the proposed method against various approaches which validates the significant superiority.

cs.CV↗

arXiv2024

Transformer-based toxin-protein interaction analysis prioritizes airborne particulate matter components with potential adverse health effects

Air pollution, particularly airborne particulate matter (PM), poses a significant threat to public health globally. It is crucial to comprehend the association between PM-associated toxic components and their cellular targets in humans to understand the mechanisms by which air pollution impacts health and to establish causal relationships between air pollution and public health consequences. Although many studies have explored the impact of PM on human health, the understanding of the association between toxins and the associated targets remain limited. Leveraging cutting-edge deep learning technologies, we developed tipFormer (toxin-protein interaction prediction based on transformer), a novel deep-learning tool for identifying toxic components capable of penetrating human cells and instigating pathogenic biological activities and signaling cascades. Experimental results show that tipFormer effectively captures interactions between proteins and toxic components. It incorporates dual pre-trained language models to encode protein sequences and chemicals. It employs a convolutional encoder to assimilate the sequential attributes of proteins and chemicals. It then introduces a learning module with a cross-attention mechanism to decode and elucidate the multifaceted interactions pivotal for the hotspots binding proteins and chemicals. Experimental results show that tipFormer effectively captures interactions between proteins and toxic components. This approach offers significant value to air quality and toxicology researchers by allowing high-throughput identification and prioritization of hazards. It supports more targeted laboratory studies and field measurements, ultimately enhancing our understanding of how air pollution impacts human health.

cs.LG↗

arXiv2024

Exact: Exploring Space-Time Perceptive Clues for Weakly Supervised Satellite Image Time Series Semantic Segmentation

Automated crop mapping through Satellite Image Time Series (SITS) has emerged as a crucial avenue for agricultural monitoring and management. However, due to the low resolution and unclear parcel boundaries, annotating pixel-level masks is exceptionally complex and time-consuming in SITS. This paper embraces the weakly supervised paradigm (i.e., only image-level categories available) to liberate the crop mapping task from the exhaustive annotation burden. The unique characteristics of SITS give rise to several challenges in weakly supervised learning: (1) noise perturbation from spatially neighboring regions, and (2) erroneous semantic bias from anomalous temporal periods. To address the above difficulties, we propose a novel method, termed exploring space-time perceptive clues (Exact). First, we introduce a set of spatial clues to explicitly capture the representative patterns of different crops from the most class-relative regions. Besides, we leverage the temporal-to-class interaction of the model to emphasize the contributions of pivotal clips, thereby enhancing the model perception for crop regions. Build upon the space-time perceptive clues, we derive the clue-based CAMs to effectively supervise the SITS segmentation network. Our method demonstrates impressive performance on various SITS benchmarks. Remarkably, the segmentation network trained on Exact-generated masks achieves 95% of its fully supervised performance, showing the bright promise of weakly supervised paradigm in crop mapping scenario. Our code will be publicly available.

cs.CV↗

arXiv2024

HiFAST: An HI Data Calibration and Imaging Pipeline for FAST III. Standing Wave Removal

The standing waves existed in radio telescope data are primarily due to reflections among the instruments, which significantly impact the spectrum quality of the Five-hundred-meter Aperture Spherical radio Telescope (FAST). Eliminating these standing waves for FAST is challenging given the constant changes in their phases and amplitudes. Over a ten-second period, the phases shift by 18$^{\circ}$ while the amplitudes fluctuate by 6 mK. Thus, we developed the fast Fourier transform (FFT) filter method to eliminate these standing waves for every individual spectrum. The FFT filter can decrease the root mean square (RMS) from 3.2 to 1.15 times the theoretical estimate. Compared to other methods such as sine fitting and running median, the FFT filter achieves a median RMS of approximately 1.2 times the theoretical expectation and the smallest scatter at 12%. Additionally, the FFT filter method avoids the flux loss issue encountered with some other methods. The FFT is also efficient in detecting harmonic radio frequency interference (RFI). In the FAST data, we identified three distinct types of harmonic RFI, each with amplitudes exceeding 100 mK and intrinsic frequency periods of 8.1, 0.5, and 0.37 MHz, respectively. The FFT filter, proven as the most effective method, is integrated into the HI data calibration and imaging pipeline for FAST (HiFAST, https://hifast.readthedocs.io).

astro-ph.IM↗

arXiv2024

Efficient Learning of Continuous-Variable Quantum States

The characterization of continuous-variable quantum states is crucial for applications in quantum communication, sensing, simulation and computing. However, a full characterization of multimode quantum states requires a number of experiments that grows exponentially with the number of modes. Here we propose an alternative approach where the goal is not to reconstruct the full quantum state, but rather to estimate its characteristic function at a given set of points. For multimode states with reflection symmetry, we show that the characteristic function at M points can be estimated using only O(log M ) copies of the state, independently of the number of modes. When the characteristic function is known to be positive, as in the case of squeezed vacuum states, the estimation is achieved by an experimentally friendly setup using only beamsplitters and homodyne measurements.

quant-ph↗

arXiv2024

EndoFinder: Online Image Retrieval for Explainable Colorectal Polyp Diagnosis

Determining the necessity of resecting malignant polyps during colonoscopy screen is crucial for patient outcomes, yet challenging due to the time-consuming and costly nature of histopathology examination. While deep learning-based classification models have shown promise in achieving optical biopsy with endoscopic images, they often suffer from a lack of explainability. To overcome this limitation, we introduce EndoFinder, a content-based image retrieval framework to find the 'digital twin' polyp in the reference database given a newly detected polyp. The clinical semantics of the new polyp can be inferred referring to the matched ones. EndoFinder pioneers a polyp-aware image encoder that is pre-trained on a large polyp dataset in a self-supervised way, merging masked image modeling with contrastive learning. This results in a generic embedding space ready for different downstream clinical tasks based on image retrieval. We validate the framework on polyp re-identification and optical biopsy tasks, with extensive experiments demonstrating that EndoFinder not only achieves explainable diagnostics but also matches the performance of supervised classification models. EndoFinder's reliance on image retrieval has the potential to support diverse downstream decision-making tasks during real-time colonoscopy procedures.

cs.CV↗

arXiv2024

Actuation system of the inertial sensor for high-precision space missions using torsion pendulum

Precision space inertial sensors are imperative to Earth geodesy missions, gravitational wave observations and several fundamental physics experiments in space. In these missions, the residual acceleration noise of the test mass(TM) caused by the forces from inertial sensor components and environment is supposed to be kept below a certain level. As a number of forces contributing to residual acceleration are related to actuation system, developing a precise actuation system to exclude any erroneous force and obtain an ultra sensitive value for TM acceleration noise is necessary and essential. However, it is difficult to test the actuation system on ground. In this paper, a torsion pendulum is established to test the influence of actuation system on TM torque noise and a closed-loop control system combined torsion pendulum and parts of actuation modules is designed to assess the performance of actuation control algorithm. The experimental results show that the parameters in an actuation system will introduce additional torque noise and the maximum noise can reach as much as 10^{-13}Nm /Hz^{1/2} at 1 mHz. The stable tracking error for the closed-loop system is about 10^{-7}, indicating that the combination system achieves good tracking performance and robustness for TM rotation control in different conditions of inertial sensors.

physics.space-ph↗

arXiv2024

SportQA: A Benchmark for Sports Understanding in Large Language Models

A deep understanding of sports, a field rich in strategic and dynamic content, is crucial for advancing Natural Language Processing (NLP). This holds particular significance in the context of evaluating and advancing Large Language Models (LLMs), given the existing gap in specialized benchmarks. To bridge this gap, we introduce SportQA, a novel benchmark specifically designed for evaluating LLMs in the context of sports understanding. SportQA encompasses over 70,000 multiple-choice questions across three distinct difficulty levels, each targeting different aspects of sports knowledge from basic historical facts to intricate, scenario-based reasoning tasks. We conducted a thorough evaluation of prevalent LLMs, mainly utilizing few-shot learning paradigms supplemented by chain-of-thought (CoT) prompting. Our results reveal that while LLMs exhibit competent performance in basic sports knowledge, they struggle with more complex, scenario-based sports reasoning, lagging behind human expertise. The introduction of SportQA marks a significant step forward in NLP, offering a tool for assessing and enhancing sports understanding in LLMs.

cs.CL↗

arXiv2024

MegaVul: A C/C++ Vulnerability Dataset with Comprehensive Code Representation

We constructed a newly large-scale and comprehensive C/C++ vulnerability dataset named MegaVul by crawling the Common Vulnerabilities and Exposures (CVE) database and CVE-related open-source projects. Specifically, we collected all crawlable descriptive information of the vulnerabilities from the CVE database and extracted all vulnerability-related code changes from 28 Git-based websites. We adopt advanced tools to ensure the extracted code integrality and enrich the code with four different transformed representations. In total, MegaVul contains 17,380 vulnerabilities collected from 992 open-source repositories spanning 169 different vulnerability types disclosed from January 2006 to October 2023. Thus, MegaVul can be used for a variety of software security-related tasks including detecting vulnerabilities and assessing vulnerability severity. All information is stored in the JSON format for easy usage. MegaVul is publicly available on GitHub and will be continuously updated. It can be easily extended to other programming languages.

cs.CR↗

arXiv2024

m-QMDS codes over mixed alphabets via orthogonal arrays

The construction of quantum error-correcting codes (QECCs) with good parameters is a hot topic in the area of quantum information and quantum computing. Quantum maximum distance separable (QMDS) codes are optimal because the minimum distance cannot be improved for a given length and code size. The QMDS codes over mixed alphabets are rarely known even if the existence and construction of QECCs over mixed alphabets with minimum distance more than or equal to three are still an open question. In this paper, we define an $m$-QMDS code over mixed alphabets, which is a generalization of QMDS codes. We establish a relation between $m$-QMDS codes over mixed alphabets and asymmetrical orthogonal arrays (OAs) with orthogonal partitions. Using this relation, we propose a general method to construct $m$-QMDS codes. As applications of this method, numerous infinite families of $m$-QMDS codes over mixed alphabets can be constructed explicitly. Compared with existing codes, the constructed codes have more flexibility in the choice of parameters, such as the alphabet sizes, length and dimension of the encoding state.

quant-ph↗

arXiv2024

Controlling Unknown Quantum States via Data-Driven State Representations

Accurate control of quantum states is crucial for quantum computing and other quantum technologies. In the basic scenario, the task is to steer a quantum system towards a target state through a sequence of control operations. Determining the appropriate operations, however, generally requires information about the initial state of the system. When the initial state is not {\em a priori} known, gathering this information is generally challenging for quantum systems of increasing size. To address this problem, we develop a machine-learning algorithm that uses a small amount of measurement data to construct a representation of the system's state. The algorithm compares this data-driven representation with the representation of the target state, and uses reinforcement learning to output the appropriate control operations.We illustrate the effectiveness of the algorithm showing that it achieves accurate control of unknown many-body quantum states and non-Gaussian continuous-variable states using data from a limited set of quantum measurements.

quant-ph↗