arXiv subjects

Yan-Lei Zhang

Publications and source records attributed to Yan-Lei Zhang.

At least 19 recordsLinked to original sources

arXiv2026

Hundred-hertz quantum circuit iteration rate in a reusable neutral-atom array

Neutral-atom quantum processors have rapidly advanced in scale and coherence, yet their practical performance remains constrained by limited quantum circuit iteration rates (qCIRs) and information throughput. Here we experimentally demonstrate a high-throughput neutral-atom system based on non-destructive readout and atom reuse. By integrating a chip-based photonic interface with a 10-qubit array, we implement non-destructive readout with a retention probability of 99.7%, and further achieve a raw qCIR of 101Hz and a post-selected qCIR of 74.8Hz. More importantly, we verify a general throughput optimization methodology and obtain a normalized Fisher information rate of 57.7Hz, improving the achievable throughput by more than one order of magnitude compared with conventional methods. Our results establish a practical route toward high-throughput neutral-atom quantum processors.

quant-ph↗

arXiv2026

A scalable chip-integrated single-photon source array based on 50 individually addressable neutral atoms

Scalable arrays of identical single-photon sources are a central resource for photonic quantum information processing, quantum networks and quantum metrology. Neutral atoms provide intrinsically identical emitters that can be assembled and rearranged in optical tweezers, but a many-channel fiber interface to individually trapped atoms has remained a major technical challenge. Here we demonstrate a chip-interfaced single-photon source array based on 50 individually addressable $^{87}\mathrm{Rb}$ atoms. A glass waveguide fan-out converts the \SI{5}{\micro m} pitch of the optical-tweezer array to the \SI{127}{\micro m} pitch of a commercial fiber array, mapping each atom to its own waveguide, fiber and single-photon detector. We resolve all 50 channels with an average nearest-neighbor cross-talk of $0.4\%$ and a uniform insertion loss of \SI{2.9}{dB}, and verify single-photon emission with $g^{(2)}(0)=0.29$, presently limited by detector dark counts and residual cooling-light scattering. Combining per-channel atom discrimination, rearrangement and reservoir replenishment, we prepare source subarrays of up to 24 atoms with a $93\%$ fill fraction. For small target numbers, atom loss is repaired from the reservoir at the detection-limited rate of \SI{118}{Hz}. We further fabricate a 784-channel waveguide chip, showing that the photonic interface can be extended well beyond the present number. This architecture establishes a fiber-native neutral-atom platform for larger arrays of identical single-photon sources.

physics.atom-ph↗

arXiv2026

Rydberg quantum antennas for chip-interfaced single-photon source array

We propose a Rydberg quantum antenna, consisting of a one-dimensional chain of neutral atoms trapped in a standing-wave optical tweezer, as a chip-interfaced single-photon source. Rydberg blockade induces a single collective excitation in the atomic chain, while its ordered geometry shapes the photon emission into a directional beam, thereby realizing a quantum antenna that emits strictly one photon at a time. Through numerical simulations, we demonstrate single-photon collection efficiencies into a waveguide exceeding 70\% through a high-NA lens with a negligible multiple excitation probability. These performance are robust against probabilistic atom loading in the standing-wave dipole traps, requiring only ten atoms, indicating experimental feasibility. The Rydberg quantum antenna thus offers a unique route toward scalable arrays of high-efficiency, high-purity, and identical single-photon sources interfaced with a photonic chip, addressing key challenges in photonic quantum information technology.

quant-ph↗

arXiv2026

Low-latency FPGA-based electronic control system for fast preparation of defect-free atom arrays

The scalability of neutral atom quantum computing demands integrated electronic control systems with low latency, modular architecture, and real-time feedback capability. Here, we present an FPGA-based electronic control system that eliminates the PC from the feedback loop, integrating photon counting, real-time decision-making, and waveform generation within a unified PXIe architecture. The system achieves a total feedback latency of $282\,\mathrm{μs}$ and is validated in practical experiments by assembling defect-free atom arrays from 24 stochastically loaded optical tweezers. A single-round rearrangement achieves a filling fraction of $\sim96\%$, while feedback-controlled iterative rearrangement over five rounds boosts the success probability for generating a 10-atom defect-free array from $65.7\%$ to $95.4\%$. This system establishes the electronic infrastructure necessary for mid-circuit measurement and real-time quantum error correction on neutral-atom platforms.

quant-ph↗

arXiv2026

Magnetic-free optical mode degeneracy lifting in lithium niobate microring resonators

Breaking time-reversal symmetry in integrated photonics without magnetic fields remains a fundamental challenge. We demonstrate phonon-induced non-reciprocity through direct lifting of forward-backward mode degeneracy in microring resonators. Coherent acousto-optic coupling generates differential AC Stark shifts between counter-propagating fundamental optical modes, eliminating the need for intermodal conversion or complex photonic structures. Simple microwave excitation of integrated piezoelectric transducers provides dynamic control of non-reciprocal response, with experimentally demonstrated mode splitting exceeding twice the optical linewidth. The linear relationship between the splitting and acoustic power enables real-time reconfigurability across a wide range of optical wavelengths. This mechanism requires only simple microring resonators and fundamental optical modes, transforming non-reciprocity from a specialized technique requiring careful modal engineering to a universal, electrically-controlled functionality. Our approach establishes a new paradigm for magnetic-free optical isolation and dynamic topological photonics.

physics.optics↗

arXiv2026

Synthetic Gauge Phase in Rydberg Electromagnetically Induced Transparency

We demonstrate a synthetic gauge phase in Rydberg electromagnetically induced transparency (EIT) using room-temperature rubidium vapor. By exploiting polarization selection rules in a ladder-type system involving ground, intermediate, and Rydberg states, multiple Zeeman sublevels form closed-loop transitions that acquire a gauge phase. We show that the relative polarization angle between the linearly polarized probe and coupling lasers directly controls this gauge phase, which modulates the EIT transmission and Rydberg state population, consequently controlling the linewidth of EIT due to Rydberg dipole-dipole interactions between atoms. Our approach provides a simple polarization-based method for realizing synthetic gauge physics and manipulating many-body interactions in atomic ensembles without requiring laser cooling and dipole traps.

physics.atom-ph↗

arXiv2025

Volcano Architecture for Scalable Quantum Processor Units

Quantum information processing platforms based on array of matter qubits, such as neutral atoms, trapped ions, and quantum dots, face significant challenges in scalable addressing and readout as system sizes increase. Here, we propose the "Volcano" architecture that establishes a new quantum processing unit implementation method based on optical channel mapping on a arbitrarily arranged static qubit array. To support the feasibility of Volcano architecture, we show a proof-of-principle demonstration by employing a photonic chip that leverages custom-designed three-dimensional waveguide structures to transform one-dimensional beam arrays into arbitrary two-dimensional output patterns matching qubit array geometries. We demonstrate parallel and independent control of 49-channel with negligible crosstalk and high uniformity. This architecture addresses the challenges in scaling up quantum processors, including both the classical link for parallel qubit control and the quantum link for efficient photon collection, and holds the potential for interfacing with neutral atom arrays and trapped ion crystals, as well as networking of heterogeneous quantum systems.

quant-ph↗

arXiv2025

Acoustically control of integrated optical microrings: from photonic molecule to Mobius strip

Microring resonators (MRRs) are fundamental building blocks of photonic integrated circuits, yet their dynamic reconfiguration has been limited to tuning refractive index or absorption. Here, we demonstrate acoustic control over optical path topology on a lithium niobate on sapphire platform. By launching gigahertz acoustic waves into a hybrid phononic-photonic waveguide, a dynamic Bragg mirror (DBM) is created within the optical path, coupling forward and backward propagating light. Employing a pair of coupled MRRs, we achieve strong coupling between supermodes of the photonic molecule with only milliwatt-level drive power, yielding a cooperativity of 2.46 per milliwatt. At higher power, DBM reflectivity up to 24% is achieved, revealing breakdowns of both the photonic molecule picture and perturbative coupled mode theory, indicating the transformation toward Mobius strip topology. Our work establishes a new dimension for controlling photonic devices, opening pathways toward fully reconfigurable photonic circuits through acoustic drive.

physics.optics↗

arXiv2025

Multi-Channel Microwave-to-Optics Conversion Utilizing a Hybrid Photonic-Phononic Waveguide

Efficient and coherent conversion between microwave and optical signals is crucial for a wide range of applications, from quantum information processing to microwave photonics and radar systems. However, existing conversion techniques rely on cavity-enhanced interactions, which limit the bandwidth and calability. Here, we demonstrate the first multi-channel microwave-to-optics conversion by introducing a traveling-wave architecture that leverages a hybrid photonic-phononic waveguide on thin-film lithium niobate (TFLN). Our approach exploits continuous phase-matching rather than discrete resonances, enabling unprecedented operational bandwidths exceeding 40 nm in the optical domain and 250 MHz in the microwave domain. By harnessing the strong piezoelectric and photoelastic effects of TFLN, we achieve coherent conversion between 9 GHz microwave photons and 1550 nm telecom photons via traveling phonons, with an internal efficiency of 2.2% (system efficiency 2.4 *10^-4 ) at room temperature. Remarkably, we demonstrate simultaneous operation of nine conversion channels in a single device. Our converter opens up new opportunities for seamless integration of microwave and photonic technologies, enabling the quantum interface for distributed quantum computing with superconducting quantum processors, high efficient microwave signal processing, and advanced radar applications.

physics.optics↗

arXiv2024

Cooperative quantum interface for noise mitigation in quantum networks

Quantum frequency converters that enable the interface between the itinerant photons and qubits are indispensable for realizing long-distance quantum network. However, the cascaded connection between converters and qubits usually brings additional insertion loss and intermediate noises. Here, we propose a cooperative quantum interface (CQI) that integrates the converter and qubit coupling into a single device for efficient long-distance entanglement generation. Compared to traditional cascaded systems, our scheme offers several advantages, including compactness, reduced insertion loss, and suppression of noise from intermediate modes. We prove the excellent performance over the separated devices by about two orders of magnitude for the entangled infidelity of two remote nodes. Moreover, we discuss an extended scheme for multiple remote nodes, revealing an exponential advantage in performance as the number of nodes increases. The cooperative effect is universal that can be further applied to multifunctional integrated quantum devices. This work opens up novel prospects for quantum networks, distributed quantum computing, and sensing.

quant-ph↗

arXiv2024

Fundamental limits of free-space microwave-to-optical frequency conversion efficiency using Rydberg atoms

Efficient microwave-to-optical frequency conversion (MOC) is crucial for applications such as radiometry, electrometry, quantum microwave illumination and quantum networks. Rydberg atoms provide a unique platform for realizing free-space MOC, promising wide-bandwidth, scalable, and flexible quantum interfaces. Here, we develop a theoretical framework to evaluate the system conversion efficiency, accounting for the mismatch between microwave and optical wavelengths comparing with the atomic ensemble size. Our analysis reveals that the conversion efficiency is fundamentally limited by the focusing of the free-space microwave field, with an upper bound of about 3/16 for diffraction-limited focusing. We propose using a microwave near-field antenna to overcome this limit. Our work provides a foundation for assessing and optimizing free-space MOC, paving the way for a variety of applications based on free-space MOC.

quant-ph↗

arXiv2024

Multifunctional metalens for trapping and characterizing single atoms

Precise control and manipulation of neutral atoms are essential for quantum technologies but largely dependent on conventional bulky optical setups. Here, we demonstrate a multifunctional metalens that integrates an achromatic lens with large numerical aperture, a quarter-wave plate, and a polarizer for trapping and characterizing single Rubidium atoms. The metalens simultaneously focuses a trapping beam at 852\,nm and collects single-photon fluorescence at 780\,nm. We observe a strong dependence of the trapping lifetime on an external bias magnetic field, suggests a complex interplay between the circularly polarized trapping light and the atom's internal states. Our work showcases the potential of metasurfaces in realizing compact and integrated quantum systems based on cold atoms, opening up new possibilities for studying quantum control and manipulation at the nanoscale.

quant-ph↗

arXiv2024

Proposal of quantum repeater architecture based on Rydberg atom quantum processors

Realizing large-scale quantum networks requires the generation of high-fidelity quantum entanglement states between remote quantum nodes, a key resource for quantum communication, distributed computation and sensing applications. However, entanglement distribution between quantum network nodes is hindered by optical transmission loss and local operation errors. Here, we propose a novel quantum repeater architecture that synergistically integrates Rydberg atom quantum processors with optical cavities to overcome these challenges. Our scheme leverages cavity-mediated interactions for efficient remote entanglement generation, followed by Rydberg interaction-based entanglement purification and swapping. Numerical simulations, incorporating realistic experimental parameters, demonstrate the generation of Bell states with 99\% fidelity at rates of 1.1\,kHz between two nodes in local-area network (distance $0.1\,\mathrm{km}$), and can be extend to metropolitan-area ($25\,\mathrm{km}$) or intercity ($\mathrm{250\,\mathrm{km}}$, with the assitance of frequency converters) network with a rate of 0.1\,kHz. This scalable approach opens up near-term opportunities for exploring quantum network applications and investigating the advantages of distributed quantum information processing.

quant-ph↗

arXiv2024

Integrated photonic nonreciprocal devices based on susceptibility-programmable medium

The switching and control of optical fields based on nonlinear optical effects are often limited to relatively weak nonlinear susceptibility and strong optical pump fields. Here, an optical medium with programmable susceptibility tensor based on polarizable atoms is proposed. Under a structured optical pump, the ground state population of atoms could be efficiently controlled by tuning the chirality and intensity of optical fields, and thus the optical response of the medium is programmable in both space and time. We demonstrate the potential of this approach by engineering the spatial distribution of the complex susceptibility tensor of the medium in photonic structures to realize nonreciprocal optical effects. Specifically, we investigate the advantages of chiral interaction between atoms and photons in an atom-cladded waveguide, theoretically showing that reconfigurable, strong, and fastly switchable isolation of optical signals in a selected optical mode is possible. The susceptibility-programmable medium provides a promising way to efficiently control the optical field, opening up a wide range of applications for integrated photonic devices and structured optics.

physics.optics↗

arXiv2024

Enhancing single-atom loading in tightly confined dipole traps with ancillary dipole beam

Single atoms trapped in tightly focused optical dipole traps provide an excellent experimental platform for quantum computing, precision measurement, and fundamental physics research. In this work, we propose and demonstrate a novel approach to enhancing the loading of single atoms by introducing a weak ancillary dipole beam. The loading rate of single atoms in a dipole trap can be significantly improved by only a few tens of microwatts of counter-propagating beam. It was also demonstrated that multiple atoms could be loaded with the assistance of a counter-propagating beam. By reducing the power requirements for trapping single atoms and enabling the trapping of multiple atoms, our method facilitates the extension of single-atom arrays and the investigation of collective light-atom interactions.

quant-ph↗

arXiv2023

Multicolor continuous-variable quantum entanglement in the Kerr frequency comb

In a traveling wave microresonator, the cascaded four-wave mixing (FWM) between optical modes allows the generation of frequency combs, including intriguing dissipative Kerr solitons (DKS). In this study, we explore the quantum fluctuations of frequency combs and unveil the quantum features of solitons. The entanglement of DKS exhibits two distinct characteristics. For modes located at the spectral edge with a small number of excitations, different comb modes with multiple colors become entangled due to photon-pair generation and coherent photon conversion stimulated by the FWM. Notably, we observe a sudden disappearance of quantum entanglement in the center of the DKS spectrum, which is attributed to the self-locking phenomena in the FWM network. Our findings demonstrate the prominent quantum nature of DKS, which is of fundamental significance in quantum optics and has the potential to be utilized in quantum networking and distributed quantum sensing applications.

physics.optics↗

arXiv2022

Self-induced optical non-reciprocity

Non-reciprocal optical components are indispensable in optical applications, and their realization without any magnetic field arose increasing research interests in photonics. Exciting experimental progress has been achieved by either introducing spatial-temporal modulation of the optical medium or combining Kerr-type optical nonlinearity with spatial asymmetry in photonic structures. However, extra driving fields are required for the first approach, while the isolation of noise and the transmission of the signal cannot be simultaneously achieved for the other approach. Here, we experimentally demonstrate a new concept of nonlinear non-reciprocal susceptibility for optical media and realize the completely passive isolation of optical signals without any external bias field. The self-induced isolation by the input signal is demonstrated with an extremely high isolation ratio of 63.4 dB, a bandwidth of 2.1 GHz for 60 dB isolation, and a low insertion loss of around 1 dB. Furthermore, novel functional optical devices are realized, including polarization purification and non-reciprocal leverage. The demonstrated nonlinear non-reciprocity provides a versatile tool to control light and deepen our understanding of light-matter interactions, and enables applications ranging from topological photonics to unidirectional quantum information transfer in a network.

physics.optics↗

arXiv2022

Break the efficiency limitations of dissipative Kerr soliton using nonlinear couplers

Dissipative Kerr soliton (DKS) offers a compact solution of coherent comb sources and holds huge potential for applications, but has long been suffering from poor power conversion efficiency when driving by a continuous-wave laser. Here, a general approach to resolving this challenge is provided. By deriving the critical coupling condition of a multimode nonlinear optics system in a generalized theoretical framework, two efficiency limitations of the conventional pump method of DKS are revealed: the effective coupling rate is too small and is also power-dependent. Nonlinear couplers are proposed to sustain the DKS indirectly through nonlinear energy conversion processes, realizing a power-adaptive effective coupling rate to the DKS and matching the total dissipation rate of the system, which promises near-unity power conversion efficiencies. For instance, a conversion efficiency exceeding $90\:\%$ is predicted for aluminum nitride microrings with a nonlinear coupler utilizing second-harmonic generation. The nonlinear coupler approach for high-efficiency generation of DKS is experimentally feasible as its mechanism applies to various nonlinear processes, including Raman and Brillouin scattering, and thus paves the way of micro-solitons towards practical applications.

physics.optics↗