arXiv subjects

Yang Feng

Publications and source records attributed to Yang Feng.

At least 181 records · Page 10Linked to original sources

arXiv2022

Direct visualization of percolating metal-insulator transition in V2O3 using scanning microwave impedance microscopy

Using the extensively studied V2O3 as a prototype system, we investigate the role of percolation in metal-insulator transition (MIT). We apply scanning microwave impedance microscopy to directly determine the metallic phase fraction p and relate it to the macroscopic conductance G, which shows a sudden jump when p reaches the percolation threshold. Interestingly, the conductance G exhibits a hysteretic behavior against p, suggesting two different percolating processes upon cooling and warming. Based on our image analysis and model simulation, we ascribe such hysteretic behavior to different domain nucleation and growth processes between cooling and warming, which is likely caused by the decoupled structural and electronic transitions in V2O3 during MIT. Our work provides a microscopic view of how the interplay of structural and electronic degrees of freedom affects MIT in strongly correlated systems.

cond-mat.str-el↗

arXiv2022

Reducing Position Bias in Simultaneous Machine Translation with Length-Aware Framework

Simultaneous machine translation (SiMT) starts translating while receiving the streaming source inputs, and hence the source sentence is always incomplete during translating. Different from the full-sentence MT using the conventional seq-to-seq architecture, SiMT often applies prefix-to-prefix architecture, which forces each target word to only align with a partial source prefix to adapt to the incomplete source in streaming inputs. However, the source words in the front positions are always illusoryly considered more important since they appear in more prefixes, resulting in position bias, which makes the model pay more attention on the front source positions in testing. In this paper, we first analyze the phenomenon of position bias in SiMT, and develop a Length-Aware Framework to reduce the position bias by bridging the structural gap between SiMT and full-sentence MT. Specifically, given the streaming inputs, we first predict the full-sentence length and then fill the future source position with positional encoding, thereby turning the streaming inputs into a pseudo full-sentence. The proposed framework can be integrated into most existing SiMT methods to further improve performance. Experiments on two representative SiMT methods, including the state-of-the-art adaptive policy, show that our method successfully reduces the position bias and thereby achieves better SiMT performance.

cs.CL↗

arXiv2022

Modeling Dual Read/Write Paths for Simultaneous Machine Translation

Simultaneous machine translation (SiMT) outputs translation while reading source sentence and hence requires a policy to decide whether to wait for the next source word (READ) or generate a target word (WRITE), the actions of which form a read/write path. Although the read/write path is essential to SiMT performance, no direct supervision is given to the path in the existing methods. In this paper, we propose a method of dual-path SiMT which introduces duality constraints to direct the read/write path. According to duality constraints, the read/write path in source-to-target and target-to-source SiMT models can be mapped to each other. As a result, the two SiMT models can be optimized jointly by forcing their read/write paths to satisfy the mapping. Experiments on En-Vi and De-En tasks show that our method can outperform strong baselines under all latency.

cs.CL↗

arXiv2022

Universal Simultaneous Machine Translation with Mixture-of-Experts Wait-k Policy

Simultaneous machine translation (SiMT) generates translation before reading the entire source sentence and hence it has to trade off between translation quality and latency. To fulfill the requirements of different translation quality and latency in practical applications, the previous methods usually need to train multiple SiMT models for different latency levels, resulting in large computational costs. In this paper, we propose a universal SiMT model with Mixture-of-Experts Wait-k Policy to achieve the best translation quality under arbitrary latency with only one trained model. Specifically, our method employs multi-head attention to accomplish the mixture of experts where each head is treated as a wait-k expert with its own waiting words number, and given a test latency and source inputs, the weights of the experts are accordingly adjusted to produce the best translation. Experiments on three datasets show that our method outperforms all the strong baselines under different latency, including the state-of-the-art adaptive policy.

cs.CL↗

arXiv2022

STEMM: Self-learning with Speech-text Manifold Mixup for Speech Translation

How to learn a better speech representation for end-to-end speech-to-text translation (ST) with limited labeled data? Existing techniques often attempt to transfer powerful machine translation (MT) capabilities to ST, but neglect the representation discrepancy across modalities. In this paper, we propose the Speech-TExt Manifold Mixup (STEMM) method to calibrate such discrepancy. Specifically, we mix up the representation sequences of different modalities, and take both unimodal speech sequences and multimodal mixed sequences as input to the translation model in parallel, and regularize their output predictions with a self-learning framework. Experiments on MuST-C speech translation benchmark and further analysis show that our method effectively alleviates the cross-modal representation discrepancy, and achieves significant improvements over a strong baseline on eight translation directions.

cs.CL↗

arXiv2022

Neural Machine Translation with Phrase-Level Universal Visual Representations

Multimodal machine translation (MMT) aims to improve neural machine translation (NMT) with additional visual information, but most existing MMT methods require paired input of source sentence and image, which makes them suffer from shortage of sentence-image pairs. In this paper, we propose a phrase-level retrieval-based method for MMT to get visual information for the source input from existing sentence-image data sets so that MMT can break the limitation of paired sentence-image input. Our method performs retrieval at the phrase level and hence learns visual information from pairs of source phrase and grounded region, which can mitigate data sparsity. Furthermore, our method employs the conditional variational auto-encoder to learn visual representations which can filter redundant visual information and only retain visual information related to the phrase. Experiments show that the proposed method significantly outperforms strong baselines on multiple MMT datasets, especially when the textual context is limited.

cs.CL↗

arXiv2022

Overcoming Catastrophic Forgetting beyond Continual Learning: Balanced Training for Neural Machine Translation

Neural networks tend to gradually forget the previously learned knowledge when learning multiple tasks sequentially from dynamic data distributions. This problem is called \textit{catastrophic forgetting}, which is a fundamental challenge in the continual learning of neural networks. In this work, we observe that catastrophic forgetting not only occurs in continual learning but also affects the traditional static training. Neural networks, especially neural machine translation models, suffer from catastrophic forgetting even if they learn from a static training set. To be specific, the final model pays imbalanced attention to training samples, where recently exposed samples attract more attention than earlier samples. The underlying cause is that training samples do not get balanced training in each model update, so we name this problem \textit{imbalanced training}. To alleviate this problem, we propose Complementary Online Knowledge Distillation (COKD), which uses dynamically updated teacher models trained on specific data orders to iteratively provide complementary knowledge to the student model. Experimental results on multiple machine translation tasks show that our method successfully alleviates the problem of imbalanced training and achieves substantial improvements over strong baseline systems.

cs.CL↗

arXiv2022

Gaussian Multi-head Attention for Simultaneous Machine Translation

Simultaneous machine translation (SiMT) outputs translation while receiving the streaming source inputs, and hence needs a policy to determine where to start translating. The alignment between target and source words often implies the most informative source word for each target word, and hence provides the unified control over translation quality and latency, but unfortunately the existing SiMT methods do not explicitly model the alignment to perform the control. In this paper, we propose Gaussian Multi-head Attention (GMA) to develop a new SiMT policy by modeling alignment and translation in a unified manner. For SiMT policy, GMA models the aligned source position of each target word, and accordingly waits until its aligned position to start translating. To integrate the learning of alignment into the translation model, a Gaussian distribution centered on predicted aligned position is introduced as an alignment-related prior, which cooperates with translation-related soft attention to determine the final attention. Experiments on En-Vi and De-En tasks show that our method outperforms strong baselines on the trade-off between translation and latency.

cs.CL↗

arXiv2022

AI-enabled Automatic Multimodal Fusion of Cone-Beam CT and Intraoral Scans for Intelligent 3D Tooth-Bone Reconstruction and Clinical Applications

A critical step in virtual dental treatment planning is to accurately delineate all tooth-bone structures from CBCT with high fidelity and accurate anatomical information. Previous studies have established several methods for CBCT segmentation using deep learning. However, the inherent resolution discrepancy of CBCT and the loss of occlusal and dentition information largely limited its clinical applicability. Here, we present a Deep Dental Multimodal Analysis (DDMA) framework consisting of a CBCT segmentation model, an intraoral scan (IOS) segmentation model (the most accurate digital dental model), and a fusion model to generate 3D fused crown-root-bone structures with high fidelity and accurate occlusal and dentition information. Our model was trained with a large-scale dataset with 503 CBCT and 28,559 IOS meshes manually annotated by experienced human experts. For CBCT segmentation, we use a five-fold cross validation test, each with 50 CBCT, and our model achieves an average Dice coefficient and IoU of 93.99% and 88.68%, respectively, significantly outperforming the baselines. For IOS segmentations, our model achieves an mIoU of 93.07% and 95.70% on the maxillary and mandible on a test set of 200 IOS meshes, which are 1.77% and 3.52% higher than the state-of-art method. Our DDMA framework takes about 20 to 25 minutes to generate the fused 3D mesh model following the sequential processing order, compared to over 5 hours by human experts. Notably, our framework has been incorporated into a software by a clear aligner manufacturer, and real-world clinical cases demonstrate that our model can visualize crown-root-bone structures during the entire orthodontic treatment and can predict risks like dehiscence and fenestration. These findings demonstrate the potential of multi-modal deep learning to improve the quality of digital dental models and help dentists make better clinical decisions.

eess.IV↗

arXiv2022

Relational Surrogate Loss Learning

Evaluation metrics in machine learning are often hardly taken as loss functions, as they could be non-differentiable and non-decomposable, e.g., average precision and F1 score. This paper aims to address this problem by revisiting the surrogate loss learning, where a deep neural network is employed to approximate the evaluation metrics. Instead of pursuing an exact recovery of the evaluation metric through a deep neural network, we are reminded of the purpose of the existence of these evaluation metrics, which is to distinguish whether one model is better or worse than another. In this paper, we show that directly maintaining the relation of models between surrogate losses and metrics suffices, and propose a rank correlation-based optimization method to maximize this relation and learn surrogate losses. Compared to previous works, our method is much easier to optimize and enjoys significant efficiency and performance gains. Extensive experiments show that our method achieves improvements on various tasks including image classification and neural machine translation, and even outperforms state-of-the-art methods on human pose estimation and machine reading comprehension tasks. Code is available at: https://github.com/hunto/ReLoss.

cs.LG↗

arXiv2022

Influences of the dissipative topological edge state on quantized transport in MnBi2Te4

The beauty of quantum Hall (QH) effect is the metrological precision of Hall resistance quantization that originates from the topological edge states. Understanding the factors that lead to quantization breakdown not only provides important insights on the nature of the topological protection of these edge states, but is beneficial for device applications involving such quantized transport. In this work, we combine conventional transport and real space conductivity mapping to investigate whether the quantization breakdown is tied to the disappearance of edge state in the hotly studied MnBi2Te4 system. Our experimental results unambiguously show that topological edge state does exist when quantization breakdown occurs. Such edge state is dissipative in nature and could lead to a quantization breakdown due to its diffusive character causing overlapping with bulk and other edge states in real devices. Our findings bring attentions to issues that are generally inaccessible in the transport study of QH, but can play important roles in practical measurements and device applications.

cond-mat.mes-hall↗

arXiv2022

Mental Health Assessment for the Chatbots

Previous researches on dialogue system assessment usually focus on the quality evaluation (e.g. fluency, relevance, etc) of responses generated by the chatbots, which are local and technical metrics. For a chatbot which responds to millions of online users including minors, we argue that it should have a healthy mental tendency in order to avoid the negative psychological impact on them. In this paper, we establish several mental health assessment dimensions for chatbots (depression, anxiety, alcohol addiction, empathy) and introduce the questionnaire-based mental health assessment methods. We conduct assessments on some well-known open-domain chatbots and find that there are severe mental health issues for all these chatbots. We consider that it is due to the neglect of the mental health risks during the dataset building and the model training procedures. We expect to attract researchers' attention to the serious mental health problems of chatbots and improve the chatbots' ability in positive emotional interaction.

cs.CL↗

arXiv2021

Mixup Decoding for Diverse Machine Translation

Diverse machine translation aims at generating various target language translations for a given source language sentence. Leveraging the linear relationship in the sentence latent space introduced by the mixup training, we propose a novel method, MixDiversity, to generate different translations for the input sentence by linearly interpolating it with different sentence pairs sampled from the training corpus when decoding. To further improve the faithfulness and diversity of the translations, we propose two simple but effective approaches to select diverse sentence pairs in the training corpus and adjust the interpolation weight for each pair correspondingly. Moreover, by controlling the interpolation weight, our method can achieve the trade-off between faithfulness and diversity without any additional training, which is required in most of the previous methods. Experiments on WMT'16 en-ro, WMT'14 en-de, and WMT'17 zh-en are conducted to show that our method substantially outperforms all previous diverse machine translation methods.

cs.CL↗

arXiv2021

Modeling Concentrated Cross-Attention for Neural Machine Translation with Gaussian Mixture Model

Cross-attention is an important component of neural machine translation (NMT), which is always realized by dot-product attention in previous methods. However, dot-product attention only considers the pair-wise correlation between words, resulting in dispersion when dealing with long sentences and neglect of source neighboring relationships. Inspired by linguistics, the above issues are caused by ignoring a type of cross-attention, called concentrated attention, which focuses on several central words and then spreads around them. In this work, we apply Gaussian Mixture Model (GMM) to model the concentrated attention in cross-attention. Experiments and analyses we conducted on three datasets show that the proposed method outperforms the baseline and has significant improvement on alignment quality, N-gram accuracy, and long sentence translation.

cs.CL↗

arXiv2021

Towards Expressive Communication with Internet Memes: A New Multimodal Conversation Dataset and Benchmark

As a kind of new expression elements, Internet memes are popular and extensively used in online chatting scenarios since they manage to make dialogues vivid, moving, and interesting. However, most current dialogue researches focus on text-only dialogue tasks. In this paper, we propose a new task named as \textbf{M}eme incorporated \textbf{O}pen-domain \textbf{D}ialogue (MOD). Compared to previous dialogue tasks, MOD is much more challenging since it requires the model to understand the multimodal elements as well as the emotions behind them. To facilitate the MOD research, we construct a large-scale open-domain multimodal dialogue dataset incorporating abundant Internet memes into utterances. The dataset consists of $\sim$45K Chinese conversations with $\sim$606K utterances. Each conversation contains about $13$ utterances with about $4$ Internet memes on average and each utterance equipped with an Internet meme is annotated with the corresponding emotion. In addition, we present a simple and effective method, which utilizes a unified generation network to solve the MOD task. Experimental results demonstrate that our method trained on the proposed corpus is able to achieve expressive communication including texts and memes. The corpus and models have been publicly available at https://github.com/lizekang/DSTC10-MOD.

cs.CL↗

arXiv2021

Sequence-Level Training for Non-Autoregressive Neural Machine Translation

In recent years, Neural Machine Translation (NMT) has achieved notable results in various translation tasks. However, the word-by-word generation manner determined by the autoregressive mechanism leads to high translation latency of the NMT and restricts its low-latency applications. Non-Autoregressive Neural Machine Translation (NAT) removes the autoregressive mechanism and achieves significant decoding speedup through generating target words independently and simultaneously. Nevertheless, NAT still takes the word-level cross-entropy loss as the training objective, which is not optimal because the output of NAT cannot be properly evaluated due to the multimodality problem. In this article, we propose using sequence-level training objectives to train NAT models, which evaluate the NAT outputs as a whole and correlates well with the real translation quality. Firstly, we propose training NAT models to optimize sequence-level evaluation metrics (e.g., BLEU) based on several novel reinforcement algorithms customized for NAT, which outperforms the conventional method by reducing the variance of gradient estimation. Secondly, we introduce a novel training objective for NAT models, which aims to minimize the Bag-of-Ngrams (BoN) difference between the model output and the reference sentence. The BoN training objective is differentiable and can be calculated efficiently without doing any approximations. Finally, we apply a three-stage training strategy to combine these two methods to train the NAT model. We validate our approach on four translation tasks (WMT14 En$\leftrightarrow$De, WMT16 En$\leftrightarrow$Ro), which shows that our approach largely outperforms NAT baselines and achieves remarkable performance on all translation tasks. The source code is available at https://github.com/ictnlp/Seq-NAT.

cs.CL↗

arXiv2021

Importance-based Neuron Allocation for Multilingual Neural Machine Translation

Multilingual neural machine translation with a single model has drawn much attention due to its capability to deal with multiple languages. However, the current multilingual translation paradigm often makes the model tend to preserve the general knowledge, but ignore the language-specific knowledge. Some previous works try to solve this problem by adding various kinds of language-specific modules to the model, but they suffer from the parameter explosion problem and require specialized manual design. To solve these problems, we propose to divide the model neurons into general and language-specific parts based on their importance across languages. The general part is responsible for preserving the general knowledge and participating in the translation of all the languages, while the language-specific part is responsible for preserving the language-specific knowledge and participating in the translation of some specific languages. Experimental results on several language pairs, covering IWSLT and Europarl corpus datasets, demonstrate the effectiveness and universality of the proposed method.

cs.CL↗

arXiv2021

Imbalanced classification: a paradigm-based review

A common issue for classification in scientific research and industry is the existence of imbalanced classes. When sample sizes of different classes are imbalanced in training data, naively implementing a classification method often leads to unsatisfactory prediction results on test data. Multiple resampling techniques have been proposed to address the class imbalance issues. Yet, there is no general guidance on when to use each technique. In this article, we provide a paradigm-based review of the common resampling techniques for binary classification under imbalanced class sizes. The paradigms we consider include the classical paradigm that minimizes the overall classification error, the cost-sensitive learning paradigm that minimizes a cost-adjusted weighted type I and type II errors, and the Neyman-Pearson paradigm that minimizes the type II error subject to a type I error constraint. Under each paradigm, we investigate the combination of the resampling techniques and a few state-of-the-art classification methods. For each pair of resampling techniques and classification methods, we use simulation studies and a real data set on credit card fraud to study the performance under different evaluation metrics. From these extensive numerical experiments, we demonstrate under each classification paradigm, the complex dynamics among resampling techniques, base classification methods, evaluation metrics, and imbalance ratios. We also summarize a few takeaway messages regarding the choices of resampling techniques and base classification methods, which could be helpful for practitioners.

stat.ME↗