Searcharxiv⌕ Search

arXiv subjects

Yang Hao

Publications and source records attributed to Yang Hao.

At least 37 records · Page 2Linked to original sources
arXiv2020

Multi-Beam Graded Dielectric Lens Antenna from Multi-Material 3D Printing

Modern communication systems will require antennas with adaptive functionality which are able to modify their performance based on the requirements of the channel. For example, mobile ad-hoc networks need directive antennas that are able to radiate in any direction across the 360° azimuth plane. Conformal antennas that can be simply operated to have multi-functional performance characteristics are therefore of interest. In this paper, we present a gradient-index lens antenna designed to radiate with a 45° beamwidth across 8 different sectors. When fed by a simple switched feeding network, the lens is able to provide 360° azimuth coverage in 45° segments. Further analysis of the radiation patterns shows how two distinct multi-beam patterns can be produced from simple feed networks and simultaneous excitation of each feeding element. The proposed lens is fabricated by multi-material 3D printing. The final lens radiates with a gain of 8.5 dBi when a single sector is excited, and with a maximum gain of 5.9 dBi in multi-beam mode. Finally, it is shown how the lens can also radiate omnidirectionally when optimised phase and amplitude weightings are applied to each port.

physics.app-ph↗
arXiv2020

Interactive Human-Machine Learning Framework for Modelling of Ferroelectric-Dielectric Composites

Data driven materials discovery and optimization requires databases that are error free and experimentally verified. Performing material measurements are time-consuming and often restricted by the fact that material sample preparations are non-trivial, labour-intensive and expensive. Numerical modelling of materials has been studied over the years in order to address these issues and nowadays it has been developed at multi-scale and multi-physics levels. However, numerical models for nano-composites, especially for ferroelectrics are limited due to multiple unknowns including oxygen vacancy densities, grain sizes and domain boundaries existing in the system. In this work, we introduce a human-machine interactive learning framework by developing a scalable semi-empirical model to accurately predict material properties enabled by deep learning (DL). MgO-doped BST (BaxSr1-xTiO3) is selected as an example ferroelectric-dielectric composite for validation. The DL model transfer-learns the experimental features of materials from a measurement database which includes data for over 100 different ferroelectric composites collected by screening the published data and combining our own measurement data. The trained DL model is utilized in providing feedback to human researchers, who then refine computer model parameters accordingly, hence completing the interactive learning cycle. Finally, the developed DL model is applied to predict and optimise new ferroelectric-dielectric composites with the highest figure of merit (FOM) value.

cond-mat.mtrl-sci↗
arXiv2019

Enhanced tunability in ferroelectric composites through local field enhancement and the effect of disorder

We investigate numerically the homogenized permittivities of composites made of low index dielectric inclusions in a ferroelectric matrix under a static electric field. A refined model is used to take into account the coupling between the electrostatic problem and the electric field dependent permittivity of the ferroelectric material, leading to a local field enhancement and permittivity change in the ferroelectric. Periodic and pseudo-random structures in two dimensions are investigated and we compute the effective permittivity, losses, electrically induced anisotropy and tunability of those metamaterials. We show that the tunability of such composites might be substantially enhanced in the periodic case, whereas introducing disorder in the microstructure weaken the effect of enhanced local permittivity change. Our results may be useful to guide the synthesis of novel composite ceramics with improved characteristics for controllable microwave devices.

physics.app-ph↗
arXiv2019

A Distributed Event-Triggered Control Strategy for DC Microgrids Based on Publish-Subscribe Model Over Industrial Wireless Sensor Networks

This paper presents a complete design, analysis, and performance evaluation of a novel distributed event-triggered control and estimation strategy for DC microgrids. The primary objective of this work is to efficiently stabilize the grid voltage, and to further balance the energy level of the energy storage (ES) systems. The locally-installed distributed controllers are utilised to reduce the number of transmitted packets and battery usage of the installed sensors, based on a proposed event-triggered communication scheme. Also, to reduce the network traffic, an optimal observer is employed which utilizes a modified Kalman consensus filter (KCF) to estimate the state of the DC microgrid via the distributed sensors. Furthermore, in order to effectively provide an intelligent data exchange mechanism for the proposed event-triggered controller, the publish-subscribe communication model is employed to setup a distributed control infrastructure in industrial wireless sensor networks (WSNs). The performance of the proposed control and estimation strategy is validated via the simulations of a DC microgrid composed of renewable energy sources (RESs). The results confirm the appropriateness of the implemented strategy for the optimal utilization of the advanced industrial network architectures in the smart grids.

eess.SP↗
arXiv2016

A class of invisible inhomogeneous media and the control of electromagnetic waves

We propose a general method to arbitrarily manipulate an electromagnetic wave propagating in a two-dimensional medium, without introducing any scattering. This leads to a whole class of isotropic spatially varying permittivity and permeability profiles that are invisible while shaping the field magnitude and/or phase. In addition, we propose a metamaterial structure working in the infrared that demonstrates deep sub-wavelength control of the electric field amplitude and strong reduction of the scattering. This work offers an alternative strategy to achieve invisibility with isotropic materials and paves the way for tailoring the propagation of light at the nanoscale

physics.optics↗
arXiv2016

A coupling model for quasi-normal modes of photonic resonators

We develop a model for the coupling of quasi-normal modes in open photonic systems consisting of two resonators. By expressing the modes of the coupled system as a linear combination of the modes of the individual particles, we obtain a generalized eigenvalue problem involving small size dense matrices. We apply this technique to dielectric rod dimmer of rectangular cross section for Transverse Electric (TE) polarization in a two-dimensional (2D) setup. The results of our model show excellent agreement with full-wave finite element simulations. We provide a convergence analysis, and a simplified model with a few modes to study the influence of the relative position of the two resonators. This model provides interesting physical insights on the coupling scheme at stake in such systems and pave the way for systematic and efficient design and optimization of resonances in more complicated systems, for applications including sensing, antennae and spectral filtering.

physics.optics↗
arXiv2011

B -> Xsγconstraints on the top quark anomalous t-> cγcoupling

Observation of top quark flavor changing neutral process $t\to c +γ$ at the LHC would be the signal of physics beyond the Standard Model. If anomalous $t\to cγ$ coupling exists, it will affect the precisely measured $\mathcal{B}(\bar{B} \to X_s γ)$. In this paper, we study the effects of a dimension 5 anomalous $ tc γ$ operator in $\bar{B} \to X_s γ$ decay to derive constraints on its possible strength. It is found that, for real anomalous $t\to cγ$ coupling $κ_{\rm{tcR}}^γ$, the constraints correspond to the upper bounds $\mathcal B (t \to c + γ)<6.54 \times 10^{-5}$ (for $κ_{\rm{tcR}}^γ>0$) and $\mathcal B (t \to c + γ)<8.52 \times 10^{-5}$ (for $κ_{\rm{tcR}}^γ<0$), respectively, which are about the same order as the $5σ$ discovery potential of ATLAS ($9.4\times 10^{-5}$) and slightly lower than that of CMS ($4.1\times 10^{-4}$) with $10 \ \rm{fb}^{-1}$ integrated luminosity operating at $\sqrt{s} =14$ TeV.

hep-ph↗
arXiv2010

Broadband Extraordinary Transmission in a Single Sub-wavelength Aperture

Coordinate transformation is applied to design an all-dielectric device for Extraordinary Transmission (ET) in a single sub-wavelength slit. The proposed device has a broadband feature and can be applied from microwave to visible frequency bands. Finite-Difference Time-Domain (FDTD) simulations are used to verify the device's performance. The results show that significantly increased transmission is achieved through the sub-wavelength aperture from 4 GHz to 8 GHz when the device is applied. In contrast with previously reported systems, the frequency sensitivity of the new device is very low.

physics.optics↗
arXiv2009

Dispersive Cylindrical Cloaks under Non-Monochromatic Illumination

Transformation-based cylindrical cloaks and concentrators are illuminated with non-monochromatic waves and unusual effects are observed with interesting potential applications. The transient responses of the devices are studied numerically with the Finite-Difference Time-Domain method and the results are verified with analytical formulas. We compute the effective bandwidth of several cloaking schemes as well as the effect of losses on the performance of the structures. We also find that narrowband behavior, frequency shift effects, time delays and spatial disturbances of the incoming waves are dominant due to the inherently dispersive nature of the devices. These effects are important and should be taken into account when designing metamaterial-based devices.

physics.class-ph↗
arXiv2009

Full-wave parallel dispersive finite-difference time-domain modeling of three-dimensional electromagnetic cloaking structures

A parallel dispersive finite-difference time-domain (FDTD) method for the modeling of three-dimensional (3-D) electromagnetic cloaking structures is presented in this paper. The permittivity and permeability of the cloak are mapped to the Drude dispersion model and taken into account in FDTD simulations using an auxiliary differential equation (ADE) method. It is shown that the correction of numerical material parameters and the slow switching-on of source are necessary to ensure stable and convergent single-frequency simulations. Numerical results from wideband simulations demonstrate that waves passing through a three-dimensional cloak experience considerable delay comparing with the free space propagations, as well as pulse broadening and blue-shift effects.

physics.comp-ph↗
arXiv2009

Ground-Plane Quasi-Cloaking for Free Space

Ground-plane cloak designs are presented, which minimize scattering of electromagnetic radiation from metallic objects in the visible spectrum. It is showed that simplified ground-plane cloaks made from only a few blocks of all-dielectric isotropic materials, either embedded in a background medium or in free space, can provide considerable cloaking performance while maintaining their broadband nature. A design which operates isolated in free space that cloaks radiation originating from a specified direction is also analyzed. These schemes should be much easier to be demonstrated experimentally compared to full designs.

physics.class-ph↗
arXiv2009

Manipulating the Loss in Electromagnetic Cloaks for Perfect Wave Absorption

We examine several ways to manipulate the loss in electromagnetic cloaks, based on transformation electromagnetics. It is found that, by utilizing inherent electric and magnetic losses of metamaterials, perfect wave absorption can be achieved based on several popular designs of electromagnetic cloaks. A practical implementation of the absorber, consisting of ten discrete layers of metamaterials, is proposed. The new devices demonstrate super-absorptivity over a moderate wideband range, suitable for both microwave and optical applications. It is corroborated that the device is functional with a subwavelength thickness and, hence, advantageous compared to the conventional absorbers.

physics.class-ph↗
arXiv2008

Enhancement of evanescent waves inside media with extreme optical anisotropy

Significant enhancement of evanescent spatial harmonics inside the slabs of media with extreme optical anisotropy is revealed. This phenomenon results from the pumping of standing waves and has the feature of being weakly sensitive to the material losses. Such characteristics may enable subwavelength imaging at considerable distances away from the objects.

physics.optics↗
arXiv2008

Subwavelength internal imaging by means of the wire medium

Evanescent wave amplification is observed, for the first time to our knowledge, inside a half-wavelength-thick wire medium slab used for subwavelength imaging. The wire medium is analyzed using both a spatially dispersive finite-difference time-domain (FDTD) method and a full-wave commercial electromagnetic simulator CST Microwave Studio. In this work we demonstrate that subwavelength details of a source placed at a distance of one-tenth of a wavelength from a wire medium slab can be detected inside the slab with a resolution of approximately one-tenth of a wavelength in spite of the fact that they cannot be resolved at the front interface of the device, due to the rapid decay of evanescent spatial harmonics in free space.

cond-mat.other↗
arXiv2008

A Radial-Dependent Dispersive Finite-Difference Time-Domain Method for the Evaluation of Electromagnetic Cloaks

A radial-dependent dispersive finite-difference time-domain (FDTD) method is proposed to simulate electromagnetic cloaking devices. The Drude dispersion model is applied to model the electromagnetic characteristics of the cloaking medium. Both lossless and lossy cloaking materials are examined and their operating bandwidth is also investigated. It is demonstrated that the perfect "invisibility" from electromagnetic cloaks is only available for lossless metamaterials and within an extremely narrow frequency band.

physics.class-ph↗
arXiv2008

Full-wave finite-difference time-domain simulation of electromagnetic cloaking structures

This paper proposes a radial dependent dispersive finite-difference time-domain method for the modelling of electromagnetic cloaking structures. The permittivity and permeability of the cloak are mapped to the Drude dispersion model and taken into account in dispersive FDTD simulations. Numerical simulations demonstrate that under ideal conditions, objects placed inside the cloak are `invisible' to external electromagnetic fields. However for the simplified cloak based on linear transformations, the back scattering has a similar level to the case of a PEC cylinder without any cloak, rendering the object still being `visible'. It is also demonstrated numerically that the simplified cloak based on high-order transformations can indeed improve the cloaking performance.

physics.class-ph↗
arXiv2007

Finite-Difference Time-Domain Study of Guided Modes in Nano-plasmonic Waveguides

A conformal dispersive finite-difference time-domain (FDTD) method is developed for the study of one-dimensional (1-D) plasmonic waveguides formed by an array of periodic infinite-long silver cylinders at optical frequencies. The curved surfaces of circular and elliptical inclusions are modelled in orthogonal FDTD grid using effective permittivities (EPs) and the material frequency dispersion is taken into account using an auxiliary differential equation (ADE) method. The proposed FDTD method does not introduce numerical instability but it requires a fourth-order discretisation procedure. To the authors' knowledge, it is the first time that the modelling of curved structures using a conformal scheme is combined with the dispersive FDTD method. The dispersion diagrams obtained using EPs and staircase approximations are compared with those from the frequency domain embedding method. It is shown that the dispersion diagram can be modified by adding additional elements or changing geometry of inclusions. Numerical simulations of plasmonic waveguides formed by seven elements show that row(s) of silver nanoscale cylinders can guide the propagation of light due to the coupling of surface plasmons.

cond-mat.other↗