arXiv subjects

Yang Hu

Publications and source records attributed to Yang Hu.

At least 55 records · Page 3Linked to original sources

arXiv2026

Critical role of phase-dependent properties in modeling photothermal sintering of LiCoO2 cathodes

Photothermal (photonic) sintering crystallizes as-deposited amorphous LiCoO2 (LCO) cathodes for solid-state thin-film batteries using millisecond, surface-localized heating. However, process design often relies on 1D models with phase-averaged, temperature-independent properties, which can mispredict peak temperatures and thermal damage margins. Here we develop a multiscale, data-driven framework that provides phase- and grain size-resolved thermophysical inputs for stoichiometric LCO. We train an Allegro neural network potential with near-ab initio accuracy, enabling Green-Kubo calculations of thermal conductivity for crystalline and amorphous phases. The low, weakly density-dependent conductivity of amorphous LCO motivates its use as an effective intergranular phase in a thin-interface model that reproduces observed grain-size-dependent thermal transport. Combined with measured wavelength-resolved optical properties in 1D multiphysics simulations, we show amorphous LCO absorbs more strongly and reaches higher peak temperatures than crystalline LCO; thus crystalline, constant-property models systematically overestimate safe operating windows.

cond-mat.mtrl-sci↗

arXiv2026

A Heterogeneous Long-Micro Scale Cascading Architecture for General Aviation Health Management

BACKGROUND: General aviation fleet expansion demands intelligent health monitoring under computational constraints. Real-world aircraft health diagnosis requires balancing accuracy with computational constraints under extreme class imbalance and environmental uncertainty. Existing end-to-end approaches suffer from the receptive field paradox: global attention introduces excessive operational heterogeneity noise for fine-grained fault classification, while localized constraints sacrifice critical cross-temporal context essential for anomaly detection. METHODS: This paper presents an AI-driven heterogeneous cascading architecture for general aviation health management. The proposed Long-Micro Scale Diagnostician (LMSD) explicitly decouples global anomaly detection (full-sequence attention) from micro-scale fault classification (restricted receptive fields), resolving the receptive field paradox while minimizing training overhead. A knowledge distillation-based interpretability module provides physically traceable explanations for safety-critical validation. RESULTS: Experiments on the public National General Aviation Flight Information Database (NGAFID) dataset (28,935 flights, 36 categories) demonstrate 4--8% improvement in safety-critical metrics (MCWPM) with 4.2 times training acceleration and 46% model compression compared to end-to-end baselines. CONCLUSIONS: The AI-driven heterogeneous architecture offers deployable solutions for aviation equipment health management, with potential for digital twin integration in future work. The proposed framework substantiates deployability in resource-constrained aviation environments while maintaining stringent safety requirements.

cs.LG↗

arXiv2026

Exploring Boundary-Aware Spatial-Frequency Fusion for Camouflaged Object Detection

Camouflaged Object Detection is challenging due to the high degree of similarity between camouflaged objects and their surrounding backgrounds. Current COD methods mainly rely on edge extraction in the spatial domain and local pixel-level information, neglecting the importance of global structural features. Additionally, they fail to effectively leverage the importance of phase spectrum information within frequency domain features. To this end, we propose a COD framework BASFNet based on boundary-aware frequency domain and spatial domain fusion.This method uses dual guided integration of frequency domain and spatial domain features. A phase-spectrum-based frequency-enhanced edge exploration module (FEEM) and a spatial core segmentation module (SCSM) are introduced to jointly capture the boundary and object features of camouflaged objects. These features are then effectively integrated through a spatial-frequency fusion interaction module (SFFIM). Furthermore, the boundary detection is further optimized through an boundary-aware training strategy. BASFNet outperforms existing state-of-the-art methods on three benchmark datasets, validating the effectiveness of the fusion of frequency and spatial domain information in COD tasks.

cs.CV↗

arXiv2026

Joint Identification of Linear Dynamics and Noise Covariance via Distributional Estimation

In this paper, we propose a novel framework for the joint identification of system dynamics and noise covariance in linear systems, under general noise distributions beyond Gaussian. Specifically, we would like to simultaneously estimate the dynamical matrix $A$ and the noise covariance matrix $\varSigma$ using state transition data. The formulation builds upon a novel parameterization of the state-transition distribution, which enables more effective use of distributional "shape" information for improved identification accuracy. We introduce two practical estimators, namely the maximum likelihood estimator (MLE) and the score-matching estimator (SME), to solve the joint dynamics-covariance identification problem, and provide rigorous analysis of their statistical properties and sample complexity. Simulation results show that the proposed estimators outperform the ordinary least squares (OLS) baseline.

eess.SY↗

arXiv2026

rPPG-VQA: A Video Quality Assessment Framework for Unsupervised rPPG Training

Unsupervised remote photoplethysmography (rPPG) promises to leverage unlabeled video data, but its potential is hindered by a critical challenge: training on low-quality "in-the-wild" videos severely degrades model performance. An essential step missing here is to assess the suitability of the videos for rPPG model learning before using them for the task. Existing video quality assessment (VQA) methods are mainly designed for human perception and not directly applicable to the above purpose. In this work, we propose rPPG-VQA, a novel framework for assessing video suitability for rPPG. We integrate signal-level and scene-level analyses and design a dual-branch assessment architecture. The signal-level branch evaluates the physiological signal quality of the videos via robust signal-to-noise ratio (SNR) estimation with a multi-method consensus mechanism, and the scene-level branch uses a multimodal large language model (MLLM) to identify interferences like motion and unstable lighting. Furthermore, we propose a two-stage adaptive sampling (TAS) strategy that utilizes the quality score to curate optimal training datasets. Experiments show that by training on large-scale, "in-the-wild" videos filtered by our framework, we can develop unsupervised rPPG models that achieve a substantial improvement in accuracy on standard benchmarks. Our code is available at https://github.com/Tianyang-Dai/rPPG-VQA.

cs.CV↗

arXiv2026

DREAMuS: Dark matter REsearch with Advanced Muon Source

We propose DREAMuS, a fixed-target experiment at the High Intensity Heavy-Ion Accelerator Facility (HIAF), to search for muon-philic dark matter mediated by light flavor-violating bosons. DREAMuS is designed to probe the parameter space of a muon-philic dark matter (DM) mediated by a light flavor-violating boson, specifically a vector $Z'$ (or a scalar $ϕ$) which is produced in muon-nucleus interactions and decays into dark matter particles with a distinctive detector signature. Precision tracking and time-of-flight measurements are used to suppress the Standard Model backgrounds. We find that DREAMuS can achieve competitive sensitivity in the GeV-scale muon-philic dark matter parameter space, reaching sensitivity to couplings at the $10^{-4}$, especially in the few-hundred-MeV region.In addition to a $μ^-$ run, we highlight the potential of a complementary $μ^+$ beam option, further improving sensitivity to dark matter below 200 $\mathrm{MeV}$ by an order of magnitude.

hep-ph↗

arXiv2026

Smart Commander: A Hierarchical Reinforcement Learning Framework for Fleet-Level PHM Decision Optimization

Decision-making in military aviation Prognostics and Health Management (PHM) faces significant challenges due to the "curse of dimensionality" in large-scale fleet operations, combined with sparse feedback and stochastic mission profiles. To address these issues, this paper proposes Smart Commander, a novel Hierarchical Reinforcement Learning (HRL) framework designed to optimize sequential maintenance and logistics decisions. The framework decomposes the complex control problem into a two-tier hierarchy: a strategic General Commander manages fleet-level availability and cost objectives, while tactical Operation Commanders execute specific actions for sortie generation, maintenance scheduling, and resource allocation. The proposed approach is validated within a custom-built, high-fidelity discrete-event simulation environment that captures the dynamics of aircraft configuration and support logistics.By integrating layered reward shaping with planning-enhanced neural networks, the method effectively addresses the difficulty of sparse and delayed rewards. Empirical evaluations demonstrate that Smart Commander significantly outperforms conventional monolithic Deep Reinforcement Learning (DRL) and rule-based baselines. Notably, it achieves a substantial reduction in training time while demonstrating superior scalability and robustness in failure-prone environments. These results highlight the potential of HRL as a reliable paradigm for next-generation intelligent fleet management.

cs.LG↗

arXiv2026

$k$-Clustering via Iterative Randomized Rounding

In this work we propose a single rounding algorithm for the fractional solutions of the standard LP relaxation for $k$-clustering. As a starting point, we obtain an iterative rounding $(\frac{3^p + 1}{2})$-Lagrangian Multiplier-Perserving (LMP) approximation for the $k$-clustering problem with the cost function being the $p$-th power of the distance. Such an algorithm outputs a random solution that opens $k$ facilities \emph{in expectation}, whose cost in expectation is at most $\frac{3^p + 1}{2}$ times the optimum cost. Thus, we recover the $2$-LMP approximation for $k$-median by Jain et al.~[JACM'03], which played a central role in deriving the current best $2$ approximation for $k$-median. Unlike the result of Jain et al., our algorithm is based on LP rounding, and it can be easily adapted to the $L_p^p$-cost setting. For the Euclidean $k$-means problem, the LMP factor we obtain is $\frac{11}{3}$, which is better than the $5$ approximation given by this framework for general metrics. Then, we show how to convert the LMP-approximation algorithms to a true-approximation, with only a $(1+\varepsilon)$ factor loss in the approximation ratio. We obtain a ($\frac{3^p + 1}{2}+\varepsilon$)-approximation algorithm for $k$-clustering with cost function being the $p$-th power of the distance, for $p \geq 1$. This reproduces the best known ($2+\varepsilon$)-approximation for $k$-median by Cohen-Addad et al. [STOC'25], and improves the approximation factor for metric $k$-means from 5.83 by Charikar at al. [FOCS'25] to $5+\varepsilon$ in our framework. Moreover, the same algorithm, but with a specialized analysis, attains ($4+\varepsilon$)-approximation for Euclidean $k$-means matching the recent result by Charikar et al. [STOC'26].

cs.DS↗

arXiv2026

An Intelligent Fault Diagnosis Method for General Aviation Aircraft Based on Multi-Fidelity Digital Twin and FMEA Knowledge Enhancement

Fault diagnosis of general aviation aircraft faces challenges including scarce real fault data, diverse fault types, and weak fault signatures. This paper proposes an intelligent fault diagnosis framework based on multi-fidelity digital twin, integrating four modules: high-fidelity flight dynamics simulation, FMEA-driven fault injection, multi-fidelity residual feature extraction, and large language model (LLM)-enhanced interpretable report generation. A digital twin is constructed using the JSBSim six-degree-of-freedom (6-DoF) flight dynamics engine, generating 23-channel engine health monitoring data via semi-empirical sensor synthesis equations. A three-layer fault injection engine based on failure mode and effects analysis (FMEA) models the physical causal propagation of 19 engine fault types. A multi-fidelity residual computation framework comprising paired-mirror residuals and GRU surrogate prediction residuals is proposed: the high-fidelity path obtains clean fault deviation signals using nominal mirror trajectories with identical initial conditions, while the low-fidelity path achieves online real-time residual computation through a multi-step prediction GRU surrogate model. A 1D-CNN classifier performs end-to-end diagnosis of 20 fault classes. An LLM diagnostic report engine enhanced with FMEA knowledge fuses classification results, residual evidence, and domain causal knowledge to generate interpretable natural language reports. Experiments show the paired-mirror residual scheme achieves a Macro-F1 of 96.2% on the 20-class task, while the GRU surrogate scheme achieves 4.3x inference acceleration at only 0.6% performance cost. Comparison across 24 schemes reveals that residual feature quality contributes approximately 5x more to diagnostic performance than classifier architecture, establishing the "residual quality first" design principle.

cs.AI↗

arXiv2026

LiteInception: A Lightweight and Interpretable Deep Learning Framework for General Aviation Fault Diagnosis

General aviation fault diagnosis and efficient maintenance are critical to flight safety; however, deploying deep learning models on resource-constrained edge devices poses dual challenges in computational capacity and interpretability. This paper proposes LiteInception--a lightweight interpretable fault diagnosis framework designed for edge deployment. The framework adopts a two-stage cascaded architecture aligned with standard maintenance workflows: Stage 1 performs high-recall fault detection, and Stage 2 conducts fine-grained fault classification on anomalous samples, thereby decoupling optimization objectives and enabling on-demand allocation of computational resources. For model compression, a multi-method fusion strategy based on mutual information, gradient analysis, and SE attention weights is proposed to reduce the input sensor channels from 23 to 15, and a 1+1 branch LiteInception architecture is introduced that compresses InceptionTime parameters by 70%, accelerates CPU inference by over 8x, with less than 3% F1 loss. Furthermore, knowledge distillation is introduced as a precision-recall regulation mechanism, enabling the same lightweight model to adapt to different scenarios--such as safety-critical and auxiliary diagnosis--by switching training strategies. Finally, a dual-layer interpretability framework integrating four attribution methods is constructed, providing traceable evidence chains of "which sensor x which time period." Experiments on the NGAFID dataset demonstrate a fault detection accuracy of 81.92% with 83.24% recall, and a fault identification accuracy of 77.00%, validating the framework's favorable balance among efficiency, accuracy, and interpretability.

cs.AI↗

arXiv2026

Select, Hypothesize and Verify: Towards Verified Neuron Concept Interpretation

It is essential for understanding neural network decisions to interpret the functionality (also known as concepts) of neurons. Existing approaches describe neuron concepts by generating natural language descriptions, thereby advancing the understanding of the neural network's decision-making mechanism. However, these approaches assume that each neuron has well-defined functions and provides discriminative features for neural network decision-making. In fact, some neurons may be redundant or may offer misleading concepts. Thus, the descriptions for such neurons may cause misinterpretations of the factors driving the neural network's decisions. To address the issue, we introduce a verification of neuron functions, which checks whether the generated concept highly activates the corresponding neuron. Furthermore, we propose a Select-Hypothesize-Verify framework for interpreting neuron functionality. This framework consists of: 1) selecting activation samples that best capture a neuron's well-defined functional behavior through activation-distribution analysis; 2) forming hypotheses about concepts for the selected neurons; and 3) verifying whether the generated concepts accurately reflect the functionality of the neuron. Extensive experiments show that our method produces more accurate neuron concepts. Our generated concepts activate the corresponding neurons with a probability approximately 1.5 times that of the current state-of-the-art method.

cs.CV↗

arXiv2026

A blockchain-based intelligent recommender system framework for enhancing supply chain resilience

Applying advanced digital technologies such as artificial intelligence (AI), blockchain (BLC), bigdata analytics (BDA) and digital twin (DT)/simulations to enhance supply chain resilience (SCRes) has been widely discussed in light of the global pandemic, regional conflicts, and the technology revolution such as Industry 4.0 and 5.0. Previous studies are limited at the conceptual level as the proactive SCRes measure with a standalone fashion. The intelligent recommendation system (IRS) obtains the capabilities for enhancing SCRes as a reactive digital measure. However, the utilization of the IRS as the SCRes enhancement tool is neglected, investigation on implementing the IRS for the SC disruption response is yet to come. To close these gaps, a data-driven supply chain disruption response IRS baseline framework was proposed by this research as an initial SCRes reactive solution. To guarantee the reliability of the proposed IRS as a stable, secure, and resilient decision support system, blockchain technology is integrated into the baseline architecture. The BLC-IRS framework is demonstrated with user prototype and industrial case to present its executable functions. A system dynamics (SD) simulation model is adopted to validate the BLC-IRS framework, the simulation results indicated that our proposed BLC-IRS can be implemented as an effective a SC disruption response measure. Our developed BLC-IRS contributes an executable SCRes digital solution with synthetic technologies as a reactive SCRes measure, enabled users to mitigate the firm and partial network level disruption in an agile and safe manner.

cs.CE↗

arXiv2026

pQuant: Towards Effective Low-Bit Language Models via Decoupled Linear Quantization-Aware Training

Quantization-Aware Training from scratch has emerged as a promising approach for building efficient large language models (LLMs) with extremely low-bit weights (sub 2-bit), which can offer substantial advantages for edge deployment. However, existing methods still fail to achieve satisfactory accuracy and scalability. In this work, we identify a parameter democratization effect as a key bottleneck: the sensitivity of all parameters becomes homogenized, severely limiting expressivity. To address this, we propose pQuant, a method that decouples parameters by splitting linear layers into two specialized branches: a dominant 1-bit branch for efficient computation and a compact high-precision branch dedicated to preserving the most sensitive parameters. Through tailored feature scaling, we explicitly guide the model to allocate sensitive parameters to the high-precision branch. Furthermore, we extend this branch into multiple, sparsely-activated experts, enabling efficient capacity scaling. Extensive experiments indicate our pQuant achieves state-of-the-art performance in extremely low-bit quantization.

cs.LG↗

arXiv2026

Hexcute: A Compiler Framework for Automating Layout Synthesis in GPU Programs

Efficient GPU programming is crucial for achieving high performance in deep learning (DL) applications. The performance of GPU programs depends on how data is parallelized across threads and arranged within memory subsystems. The mapping functions describing tensors on GPUs are known as \emph{tensor layouts}. Low-level programming frameworks, such as CUTLASS and Hidet, provide expressive layout abstractions but often require \emph{considerable programming effort} to manually specify optimal layouts. High-level GPU programming languages, such as Triton, rely on compiler heuristics to generate dataflow, layouts, and pipelining strategies in GPU programs. However, the heuristics for dataflow and pipelining strategies are not generalizable to complex operators. To balance expressiveness and programmability, we propose Hexcute, a compiler framework that automates layout synthesis while providing explicit control over dataflow and pipelining. Hexcute formalizes layout synthesis as a constraint programming problem and solves it with a type-inference-based algorithm. This approach enables systematic exploration of optimal layouts and instructions. Our evaluation shows that Hexcute matches the performance of libraries like cuBLAS and FlashAttention on GEMM, Attention, and their variants, while reducing the amount of code by 1.27$\times$-7.94$\times$ compared to CUTLASS. For mixed-type mixture-of-experts (MoE) operators, Hexcute achieves an average speedup of 6.46$\times$ over Triton. In the end-to-end evaluations of vLLM, Hexcute delivers up to 2.60$\times$ speedup on DeepSeek-R1-AWQ and 2.04$\times$ on a Mamba-based model.

cs.LG↗

arXiv2026

LLaTTE: Scaling Laws for Multi-Stage Sequence Modeling in Large-Scale Ads Recommendation

We present LLaTTE (LLM-Style Latent Transformers for Temporal Events), a scalable transformer architecture for production ads recommendation. Through systematic experiments, we demonstrate that sequence modeling in recommendation systems follows predictable power-law scaling similar to LLMs. Crucially, we find that semantic features bend the scaling curve: they are a prerequisite for scaling, enabling the model to effectively utilize the capacity of deeper and longer architectures. To realize the benefits of continued scaling under strict latency constraints, we introduce a two-stage architecture that offloads the heavy computation of large, long-context models to an asynchronous upstream user model. We demonstrate that upstream improvements transfer predictably to downstream ranking tasks. Deployed as the largest user model at Meta, this multi-stage framework drives a 4.3\% conversion uplift on Facebook Feed and Reels with minimal serving overhead, establishing a practical blueprint for harnessing scaling laws in industrial recommender systems.

cs.IR↗

arXiv2026

All-Dielectric Resonant Cavity Electro-Optic Transduction Between Microwave and Telecom

We present a resonant electro-optic transducer for efficient conversion between microwave and telecom wavelength photons. Our platform employs a bulk lithium niobate crystal whose large dielectric constant creates wavelength-scale confinement of microwave photons. By incorporating this crystal within a high-finesse Fabry - Perot optical cavity, microwave photons couple to optical photons through the electro-optic effect. We demonstrate the ability to tune our system into triply resonant operation, where microwave photons, optical pump photons, and upconverted optical photons are simultaneously resonant with high quality factor electromagnetic modes of the system. The device achieves photon number conversion efficiency at the percent level, comparable to state-of-the-art devices at room temperature -- sufficient to resolve the thermal occupation of the microwave mode -- while avoiding the noise and loss associated with metal electrodes. These results establish our all-dielectric devices as a promising platform for high-precision sensing of optically detected microwave fields and as a viable route toward single-photon-level microwave - optical quantum transduction.

quant-ph↗

arXiv2026

PADE: A Predictor-Free Sparse Attention Accelerator via Unified Execution and Stage Fusion

Attention-based models have revolutionized AI, but the quadratic cost of self-attention incurs severe computational and memory overhead. Sparse attention methods alleviate this by skipping low-relevance token pairs. However, current approaches lack practicality due to the heavy expense of added sparsity predictor, which severely drops their hardware efficiency. This paper advances the state-of-the-art (SOTA) by proposing a bit-serial enable stage-fusion (BSF) mechanism, which eliminates the need for a separate predictor. However, it faces key challenges: 1) Inaccurate bit-sliced sparsity speculation leads to incorrect pruning; 2) Hardware under-utilization due to fine-grained and imbalanced bit-level workloads. 3) Tiling difficulty caused by the row-wise dependency in sparsity pruning criteria. We propose PADE, a predictor-free algorithm-hardware co-design for dynamic sparse attention acceleration. PADE features three key innovations: 1) Bit-wise uncertainty interval-enabled guard filtering (BUI-GF) strategy to accurately identify trivial tokens during each bit round; 2) Bidirectional sparsity-based out-of-order execution (BS-OOE) to improve hardware utilization; 3) Interleaving-based sparsity-tiled attention (ISTA) to reduce both I/O and computational complexity. These techniques, combined with custom accelerator designs, enable practical sparsity acceleration without relying on an added sparsity predictor. Extensive experiments on 22 benchmarks show that PADE achieves 7.43x speed up and 31.1x higher energy efficiency than Nvidia H100 GPU. Compared to SOTA accelerators, PADE achieves 5.1x, 4.3x and 3.4x energy saving than Sanger, DOTA and SOFA.

cs.AR↗

arXiv2025

Max-Entropy Reinforcement Learning with Flow Matching and A Case Study on LQR

Soft actor-critic (SAC) is a popular algorithm for max-entropy reinforcement learning. In practice, the energy-based policies in SAC are often approximated using simple policy classes for efficiency, sacrificing the expressiveness and robustness. In this paper, we propose a variant of the SAC algorithm that parameterizes the policy with flow-based models, leveraging their rich expressiveness. In the algorithm, we evaluate the flow-based policy utilizing the instantaneous change-of-variable technique and update the policy with an online variant of flow matching developed in this paper. This online variant, termed importance sampling flow matching (ISFM), enables policy update with only samples from a user-specified sampling distribution rather than the unknown target distribution. We develop a theoretical analysis of ISFM, characterizing how different choices of sampling distributions affect the learning efficiency. Finally, we conduct a case study of our algorithm on the max-entropy linear quadratic regulator problems, demonstrating that the proposed algorithm learns the optimal action distribution.

cs.LG↗