arXiv subjects

Yang Wang

Publications and source records attributed to Yang Wang.

At least 559 records · Page 31Linked to original sources

arXiv2022

Realization of high-dynamic-range broadband magnetic-field sensing with ensemble nitrogen-vacancy centers in diamond

We present a new magnetometry method integrating an ensemble of nitrogen-vacancy (NV) centers in a single-crystal diamond with an extended dynamic range for monitoring the fast changing magnetic-field. The NV-center spin resonance frequency is tracked using a closed-loop frequency locked technique with fast frequency hopping to achieve a 10 kHz measurement bandwidth, thus, allowing for the detection of fast changing magnetic signals up to 0.723 T/s.This technique exhibits an extended dynamic range subjected to the working bandwidth of the microwave source. This extended dynamic range can reach up to 4.3 mT, which is 86 times broader than the intrinsic dynamic range. The essential components for NV spin control and signal processing such as signal generation, microwave frequency control, data processing and readout are integrated in a board-level system. With this platform, we demonstrate broadband magnetometry with an optimized sensitivity of 4.2 nT-Hz-1/2. This magnetometry method has the potential to be implemented in a multichannel frequency locked vector magnetometer suitable for a wide range of practical applications such as magnetocardiography and high-precision current sensors.

quant-ph↗

arXiv2022

S-Rocket: Selective Random Convolution Kernels for Time Series Classification

Random convolution kernel transform (Rocket) is a fast, efficient, and novel approach for time series feature extraction using a large number of independent randomly initialized 1-D convolution kernels of different configurations. The output of the convolution operation on each time series is represented by a partial positive value (PPV). A concatenation of PPVs from all kernels is the input feature vector to a Ridge regression classifier. Unlike typical deep learning models, the kernels are not trained and there is no weighted/trainable connection between kernels or concatenated features and the classifier. Since these kernels are generated randomly, a portion of these kernels may not positively contribute in performance of the model. Hence, selection of the most important kernels and pruning the redundant and less important ones is necessary to reduce computational complexity and accelerate inference of Rocket for applications on the edge devices. Selection of these kernels is a combinatorial optimization problem. In this paper, we propose a scheme for selecting these kernels while maintaining the classification performance. First, the original model is pre-trained at full capacity. Then, a population of binary candidate state vectors is initialized where each element of a vector represents the active/inactive status of a kernel. A population-based optimization algorithm evolves the population in order to find a best state vector which minimizes the number of active kernels while maximizing the accuracy of the classifier. This activation function is a linear combination of the total number of active kernels and the classification accuracy of the pre-trained classifier with the active kernels. Finally, the selected kernels in the best state vector are utilized to train the Ridge regression classifier with the selected kernels.

cs.LG↗

arXiv2022

Delving Globally into Texture and Structure for Image Inpainting

Image inpainting has achieved remarkable progress and inspired abundant methods, where the critical bottleneck is identified as how to fulfill the high-frequency structure and low-frequency texture information on the masked regions with semantics. To this end, deep models exhibit powerful superiority to capture them, yet constrained on the local spatial regions. In this paper, we delve globally into texture and structure information to well capture the semantics for image inpainting. As opposed to the existing arts trapped on the independent local patches, the texture information of each patch is reconstructed from all other patches across the whole image, to match the coarsely filled information, specially the structure information over the masked regions. Unlike the current decoder-only transformer within the pixel level for image inpainting, our model adopts the transformer pipeline paired with both encoder and decoder. On one hand, the encoder captures the texture semantic correlations of all patches across image via self-attention module. On the other hand, an adaptive patch vocabulary is dynamically established in the decoder for the filled patches over the masked regions. Building on this, a structure-texture matching attention module anchored on the known regions comes up to marry the best of these two worlds for progressive inpainting via a probabilistic diffusion process. Our model is orthogonal to the fashionable arts, such as Convolutional Neural Networks (CNNs), Attention and Transformer model, from the perspective of texture and structure information for image inpainting. The extensive experiments over the benchmarks validate its superiority. Our code is available at https://github.com/htyjers/DGTS-Inpainting.

cs.CV↗

arXiv2022

Observation of nonlinear planar Hall effect in magnetic insulator/topological insulator heterostructures

Interfacing topological insulators (TIs) with magnetic insulators (MIs) has been widely used to study the interaction between topological surface states and magnetism. Previous transport studies typically interpret the suppression of weak antilocalization or appearance of the anomalous Hall effect as signatures of magnetic proximity effect (MPE) imposed to TIs. Here, we report the observation of nonlinear planar Hall effect (NPHE) in Bi2Se3 films grown on MI thulium and yttrium iron garnet (TmIG and YIG) substrates, which is an order of magnitude larger than that in Bi2Se3 grown on nonmagnetic gadolinium gallium garnet (GGG) substrate. The nonlinear Hall resistance in TmIG/Bi2Se3 depends linearly on the external magnetic field, while that in YIG/Bi2Se3 exhibits an extra hysteresis loop around zero field. The magnitude of the NPHE is found to scale inversely with carrier density. We speculate the observed NPHE is related to the MPE-induced exchange gap opening and out-of-plane spin textures in the TI surface states, which may be used as an alternative transport signature of the MPE in MI/TI heterostructures.

cond-mat.mes-hall↗

arXiv2022

Switchable Online Knowledge Distillation

Online Knowledge Distillation (OKD) improves the involved models by reciprocally exploiting the difference between teacher and student. Several crucial bottlenecks over the gap between them -- e.g., Why and when does a large gap harm the performance, especially for student? How to quantify the gap between teacher and student? -- have received limited formal study. In this paper, we propose Switchable Online Knowledge Distillation (SwitOKD), to answer these questions. Instead of focusing on the accuracy gap at test phase by the existing arts, the core idea of SwitOKD is to adaptively calibrate the gap at training phase, namely distillation gap, via a switching strategy between two modes -- expert mode (pause the teacher while keep the student learning) and learning mode (restart the teacher). To possess an appropriate distillation gap, we further devise an adaptive switching threshold, which provides a formal criterion as to when to switch to learning mode or expert mode, and thus improves the student's performance. Meanwhile, the teacher benefits from our adaptive switching threshold and keeps basically on a par with other online arts. We further extend SwitOKD to multiple networks with two basis topologies. Finally, extensive experiments and analysis validate the merits of SwitOKD for classification over the state-of-the-arts. Our code is available at https://github.com/hfutqian/SwitOKD.

cs.CV↗

arXiv2022

Field-deployable Quantum Memory for Quantum Networking

High-performance quantum memories are an essential component for regulating temporal events in quantum networks. As a component in quantum-repeaters, they have the potential to support the distribution of entanglement beyond the physical limitations of fiber loss. This will enable key applications such as quantum key distribution, network-enhanced quantum sensing, and distributed quantum computing. Here, we present a quantum memory engineered to meet real-world deployment and scaling challenges. The memory technology utilizes a warm rubidium vapor as the storage medium, and operates at room temperature, without the need for vacuum- and/or cryogenic- support. We demonstrate performance specifications of high-fidelity retrieval (95\%) and low operation error $(10^{-2})$ at a storage time of 160 $μs$ for single-photon level quantum memory operations. We further show a substantially improved storage time (with classical-level light) of up to 1 ms by suppressing atomic diffusions. The device is housed in an enclosure with a standard 2U rackmount form factor, and can robustly operate on a day scale in a noisy environment. This result marks an important step toward implementing quantum networks in the field.

quant-ph↗

arXiv2022

An Integrated Solar Battery based on a Charge Storing 2D Carbon Nitride

Solar batteries capable of harvesting sunlight and storing solar energy present an attractive vista to transition our energy infrastructure into a sustainable future. We present an integrated, fully earth-abundant solar battery design based on a bifunctional (light absorbing and charge storing) carbon nitride (K-PHI) photoanode, combined with all-organic hole transfer and storage materials. An internal ladder-type hole transfer cascade via a hole transport layer is used to shuttle the photogenerated holes to the PEDOT:PSS cathode. This concept differs from previous designs such as light-assisted battery schemes or photocapacitors and allows charging with only light or light-assisted during electrical charging and discharging, thus substantially increasing the energy output of the cell. Compared to battery operation in the dark, light-assisted (dis)charging increases charge output by 243 %, thereby increasing the electric coulombic efficiency from 68.3 % in the dark to 231 %, leading to energy improvements of 94.1 % under illumination.

cond-mat.mtrl-sci↗

arXiv2022

Connectedness and local cut points of generalized Sierpinski carpets

We investigate a homeomorphism problem on a class of self-similar sets called generalized Sierpinski carpets (or shortly GSCs). It follows from two well-known results by Hata and Whyburn that a connected GSC is homeomorphic to the standard Sierpinski carpet if and only if it has no local cut points. On the one hand, we show that to determine whether a given GSC is connected, it suffices to iterate the initial pattern twice. On the other hand, we obtain two criteria: (1) for a connected GSC to have cut points, (2) for a connected GSC with no cut points to have local cut points. With these two criteria, we characterize all GSCs that are homeomorphic to the standard Sierpinski carpet. Our results on cut points and local cut points hold for Baranski carpets, too. Moreover, we extend the connectedness result to Baranski sponges. Thus, we also characterize when a Baranski carpet is homeomorphic to the standard GSC.

math.GN↗

arXiv2022

Performance Analysis of OMP in Super-Resolution

Given a spectrally sparse signal $\mathbf{y} = \sum_{i=1}^s x_i\mathbf{f}(τ_i) \in \mathbb{C}^{2n+1}$ consisting of $s$ complex sinusoids, we consider the super-resolution problem, which is about estimating frequency components $\{τ_i\}_{i=1}^s$ of $\mathbf y$. We consider the OMP-type algorithms for super-resolution, which is more efficient than other approaches based on Semi-Definite Programming. Our analysis shows that a two-stage algorithm with OMP initialization can recover frequency components under the separation condition $nΔ\gtrsim \text{dyn}(\mathbf{x})$ and the dependency on $\text{dyn}(\mathbf{x})$ is inevitable for the vanilla OMP algorithm. We further show that the Sliding-OMP algorithm, a variant of the OMP algorithm with an additional refinement step at each iteration, is provable to recover $\{τ_i\}_{i=1}^s$ under the separation condition $nΔ\geq c$. Moreover, our result can be extended to an incomplete measurement model with $O( s^2\log n)$ measurements.

cs.IT↗

arXiv2022

Large-scale full-programmable quantum walk and its applications

With photonics, the quantum computational advantage has been demonstrated on the task of boson sampling. Next, developing quantum-enhanced approaches for practical problems becomes one of the top priorities for photonic systems. Quantum walks are powerful kernels for developing new and useful quantum algorithms. Here we realize large-scale quantum walks using a fully programmable photonic quantum computing system. The system integrates a silicon quantum photonic chip, enabling the simulation of quantum walk dynamics on graphs with up to 400 vertices and possessing full programmability over quantum walk parameters, including the particle property, initial state, graph structure, and evolution time. In the 400-dimensional Hilbert space, the average fidelity of random entangled quantum states after the whole on-chip circuit evolution reaches as high as 94.29$\pm$1.28$\%$. With the system, we demonstrated exponentially faster hitting and quadratically faster mixing performance of quantum walks over classical random walks, achieving more than two orders of magnitude of enhancement in the experimental hitting efficiency and almost half of the reduction in the experimental evolution time for mixing. We utilize the system to implement a series of quantum applications, including measuring the centrality of scale-free networks, searching targets on Erdös-Rényi networks, distinguishing non-isomorphic graph pairs, and simulating the topological phase of higher-order topological insulators. Our work shows one feasible path for quantum photonics to address applications of practical interests in the near future.

quant-ph↗

arXiv2022

Giant and Reversible Electronic Structure Evolution in a Magnetic Topological Material EuCd2As2

The electronic structure and the physical properties of quantum materials can be significantly altered by charge carrier doping and magnetic state transition. Here we report a discovery of a giant and reversible electronic structure evolution with doping in a magnetic topological material. By performing high-resolution angle-resolved photoemission measurements on EuCd2As2,we found that a huge amount of hole doping can be introduced into the sample surface due to surface absorption. The electronic structure exhibits a dramatic change with the hole doping which can not be described by a rigid band shift. Prominent band splitting is observed at high doping which corresponds to a doping-induced magnetic transition at low temperature (below -15 K) from an antiferromagnetic state to a ferromagnetic state. These results have established a detailed electronic phase diagram of EuCd2As2 where the electronic structure and the magnetic structure change systematically and dramatically with the doping level. They further suggest that the transport, magnetic and topological properties of EuCd2As2 can be greatly modified by doping. These work will stimulate further investigations to explore for new phenomena and properties in doping this magnetic topological material.

cond-mat.mtrl-sci↗

arXiv2022

Analysis of A New Adaptive Time Filter Algorithm for The Unsteady Stokes/Darcy Model

In this report, we propose a new adaptive time filter algorithm for the unsteady Stokes/Darcy model. First we present a first order $θ$-scheme with the variable time step which is one parameter family of Linear Multi-step methods and use a time filter algorithm to increase the convergence order to second order with almost no increasing the amount of computation. Furthermore, we construct coupled and decoupled adaptive algorithms. Then we analyze stabilities and the second-order accuracy of variable time-stepping algorithm for Linear Multi-step methods plus time filter, respectively. Finally, we use two numerical experiments to verify theoretical results including effectiveness, convergence and efficiency with adaptive method.

math.NA↗

arXiv2022

Towards Learning in Grey Spatiotemporal Systems: A Prophet to Non-consecutive Spatiotemporal Dynamics

Spatiotemporal forecasting is an imperative topic in data science due to its diverse and critical applications in smart cities. Existing works mostly perform consecutive predictions of following steps with observations completely and continuously obtained, where nearest observations can be exploited as key knowledge for instantaneous status estimation. However, the practical issues of early activity planning and sensor failures elicit a brand-new task, i.e., non-consecutive forecasting. In this paper, we define spatiotemporal learning systems with missing observation as Grey Spatiotemporal Systems (G2S) and propose a Factor-Decoupled learning framework for G2S (FDG2S), where the core idea is to hierarchically decouple multi-level factors and enable both flexible aggregations and disentangled uncertainty estimations. Firstly, to compensate for missing observations, a generic semantic-neighboring sequence sampling is devised, which selects representative sequences to capture both periodical regularity and instantaneous variations. Secondly, we turn the predictions of non-consecutive statuses into inferring statuses under expected combined exogenous factors. In particular, a factor-decoupled aggregation scheme is proposed to decouple factor-induced predictive intensity and region-wise proximity by two energy functions of conditional random field. To infer region-wise proximity under flexible factor-wise combinations and enable dynamic neighborhood aggregations, we further disentangle compounded influences of exogenous factors on region-wise proximity and learn to aggregate them. Given the inherent incompleteness and critical applications of G2S, a DisEntangled Uncertainty Quantification is put forward, to identify two types of uncertainty for reliability guarantees and model interpretations.

cs.LG↗

arXiv2022

Grasping Core Rules of Time Series through Pure Models

Time series underwent the transition from statistics to deep learning, as did many other machine learning fields. Although it appears that the accuracy has been increasing as the model is updated in a number of publicly available datasets, it typically only increases the scale by several times in exchange for a slight difference in accuracy. Through this experiment, we point out a different line of thinking, time series, especially long-term forecasting, may differ from other fields. It is not necessary to use extensive and complex models to grasp all aspects of time series, but to use pure models to grasp the core rules of time series changes. With this simple but effective idea, we created PureTS, a network with three pure linear layers that achieved state-of-the-art in 80% of the long sequence prediction tasks while being nearly the lightest model and having the fastest running speed. On this basis, we discuss the potential of pure linear layers in both phenomena and essence. The ability to understand the core law contributes to the high precision of long-distance prediction, and reasonable fluctuation prevents it from distorting the curve in multi-step prediction like mainstream deep learning models, which is summarized as a pure linear neural network that avoids over-fluctuating. Finally, we suggest the fundamental design standards for lightweight long-step time series tasks: input and output should try to have the same dimension, and the structure avoids fragmentation and complex operations.

cs.LG↗

arXiv2022

Instance Image Retrieval by Learning Purely From Within the Dataset

Quality feature representation is key to instance image retrieval. To attain it, existing methods usually resort to a deep model pre-trained on benchmark datasets or even fine-tune the model with a task-dependent labelled auxiliary dataset. Although achieving promising results, this approach is restricted by two issues: 1) the domain gap between benchmark datasets and the dataset of a given retrieval task; 2) the required auxiliary dataset cannot be readily obtained. In light of this situation, this work looks into a different approach which has not been well investigated for instance image retrieval previously: {can we learn feature representation \textit{specific to} a given retrieval task in order to achieve excellent retrieval?} Our finding is encouraging. By adding an object proposal generator to generate image regions for self-supervised learning, the investigated approach can successfully learn feature representation specific to a given dataset for retrieval. This representation can be made even more effective by boosting it with image similarity information mined from the dataset. As experimentally validated, such a simple ``self-supervised learning + self-boosting'' approach can well compete with the relevant state-of-the-art retrieval methods. Ablation study is conducted to show the appealing properties of this approach and its limitation on generalisation across datasets.

cs.CV↗

arXiv2022

Trajectory Tracking Control of the Bionic Joint Actuated by Pneumatic Artificial Muscle Based on Robust Modeling

To simply and effectively realize the trajectory tracking control of a bionic joint actuated by a single pneumatic artificial muscle (PAM), a cascaded control strategy is proposed based on the robust modeling method. Firstly, the relationship between the input voltage of the proportional directional control valve and the inner driving pressure of PAM is expressed as a nonlinear model analytically. Secondly, the nonlinear relationship between the driving pressure input of PAM and the angular position output of the bionic joint is described as a second-order linear time-invariant model (LTI) accompanied by parametric perturbations, equivalently, and then the parameters of the model are identified by the robust modeling method. Then, a hybrid model is established based on the two models (the nonlinear model and the LTI model) and corresponding to it, a cascaded controller is developed, the outer loop of which is an H-infinite controller for the angular position tracking designed by loop-shaping design procedure (LSDP) and the inner loop is a nonlinear controller based on the feedback linearization theory for the PAM driving pressure control. Finally, the experiment is accomplished within the joint rotation range of 90 degrees and with the working frequency upper bound of 1.25 rad/s. And the joint with the developed cascaded controller tracks given reference trajectories with steady-state errors smaller than 2%. Results show that the trajectory tracking control of a highly nonlinear system is highly efficient using the proposed strategy in the case of relatively low work frequency.

eess.SY↗

arXiv2022

PECCO: A Profit and Cost-oriented Computation Offloading Scheme in Edge-Cloud Environment with Improved Moth-flame Optimisation

With the fast growing quantity of data generated by smart devices and the exponential surge of processing demand in the Internet of Things (IoT) era, the resource-rich cloud centres have been utilised to tackle these challenges. To relieve the burden on cloud centres, edge-cloud computation offloading becomes a promising solution since shortening the proximity between the data source and the computation by offloading computation tasks from the cloud to edge devices can improve performance and Quality of Service (QoS). Several optimisation models of edge-cloud computation offloading have been proposed that take computation costs and heterogeneous communication costs into account. However, several important factors are not jointly considered, such as heterogeneities of tasks, load balancing among nodes and the profit yielded by computation tasks, which lead to the profit and cost-oriented computation offloading optimisation model PECCO proposed in this paper. Considering that the model is hard in nature and the optimisation objective is not differentiable, we propose an improved Moth-flame optimiser PECCO-MFI which addresses some deficiencies of the original Moth-flame Optimiser and integrate it under the edge-cloud environment. Comprehensive experiments are conducted to verify the superior performance of the proposed method when optimising the proposed task offloading model under the edge-cloud environment.

cs.DC↗

arXiv2022

A self-contained and self-explanatory DNA storage system

Current research on DNA storage usually focuses on the improvement of storage density by developing effective encoding and decoding schemes while lacking the consideration on the uncertainty in ultra-long-term data storage and retention. Consequently, the current DNA storage systems are often not self-contained, implying that they have to resort to external tools for the restoration of the stored DNA data. This may result in high risks in data loss since the required tools might not be available due to the high uncertainty in far future. To address this issue, we propose in this paper a self-contained DNA storage system that can bring self-explanatory to its stored data without relying on any external tool. To this end, we design a specific DNA file format whereby a separate storage scheme is developed to reduce the data redundancy while an effective indexing is designed for random read operations to the stored data file. We verified through experimental data that the proposed self-contained and self-explanatory method can not only get rid of the reliance on external tools for data restoration but also minimise the data redundancy brought about when the amount of data to be stored reaches a certain scale.

cs.ET↗