arXiv subjects

Yanming Ma

Publications and source records attributed to Yanming Ma.

At least 55 records · Page 3Linked to original sources

arXiv2021

Superconductivity in Shear Strained Semiconductors

Semiconductivity and superconductivity are remarkable quantum phenomena that have immense impact on science and technology, and materials that can be tuned, usually by pressure or doping, to host both types of quantum states are of great fundamental and practical significance. Here we show by first-principles calculations a distinct route for tuning semiconductors into superconductors by diverse large-range elastic shear strains, as demonstrated in exemplary cases of silicon and silicon carbide. Analysis of strain driven evolution of bonding structure, electronic states, lattice vibration, and electron-phonon coupling unveils robust pervading deformation induced mechanisms auspicious for modulating semiconducting and superconducting states under versatile material conditions. This finding opens vast untapped structural configurations for rational exploration of tunable emergence and transition of these intricate quantum phenomena in a broad range of materials.

cond-mat.mtrl-sci↗

arXiv2021

Pressure-induced high-temperature superconductivity retained at ambient

To raise the superconducting-transition temperature (Tc) has been the driving force for the long, sustained effort in superconductivity research. Recent progress in hydrides with Tcs up to 287 K under 267 GPa has heralded a new era of room-temperature superconductivity (RTS) with immense technological promise. Indeed, RTS has lifted the temperature barrier for the ubiquitous application of superconductivity. Unfortunately, formidable pressure is required to attain such high Tcs. The most effective relief to this impasse is to remove the pressure needed while retaining the pressure-induced Tc without pressure. Here we show such a possibility in the pure and doped high-temperature superconductor (HTS) FeSe by retaining, at ambient via pressure-quenching (PQ), its Tc up to 37 K (quadrupling that of a pristine FeSe) and other pressure-induced phases. We have also observed that some phases remain stable without pressure at up to 300 K and for at least 7 days. The observations are in qualitative agreement with our ab initio simulations using the solid-state nudged elastic band (SSNEB) method. We strongly believe that the PQ technique developed here can be adapted to the RTS hydrides and other materials of value with minimal effort.

cond-mat.supr-con↗

arXiv2020

Reaching room temperature superconductivity by optimizing doping in LaH$_{10}$?

Intuitively, doping represents one of the most promising avenues for optimization of best prospect superconductors (SC) such as conventional high-pressure SCs with record critical temperatures. However, doping at high pressure (HP) is very challenging, and there is not a proved route to achieve it in a controlled fashion. Aided by computing simulations, we show that it may be plausible to start by alloying primary materials and subsequently incorporate high ratios of hydrogen at moderates pressures ($\approx$1.5 Mbar). Our theoretical results evidence the possibility to tune the electronic structure of LaH$_{10}$, increase the density of states at the Fermi level by doping of various elements and hence change their superconducting properties. We found aluminium to increase the occupation at the Fermi level by more than 30 %. Incorporation of other elements such as Si, Ge, H, Ir, Ca, and others with a varying percentage also play in favour to tune the electronic structure. More importantly, these predictions lie in experimentally attainable doping levels. Also, for the first time, we shed light on how the formation of defects and vacancies influence on the electronic structure of a HP-hydride superconductor. The concepts presented in this work can be extended to other high-pressure, hydrogen-based superconductors such as H$_3$S. Arguably, doping is one of the promising paths to reach room-temperature superconductivity, a Holy grail of condensed matter physics.

cond-mat.supr-con↗

arXiv2020

Nonlocal Kinetic Energy Density Functionals for Isolated Systems via Local Density Approximation Kernels

Despite a large number of nonlocal kinetic energy density functionals (KEDFs) available for large-scale calculations, most of those nonlocal KEDFs designed for the extended systems cannot be directly applied to isolated systems. In this manuscript, we proposed a generalized scheme to construct nonlocal KEDFs via the local density approximation kernels and construct a family of KEDFs for simulations of isolated systems within orbital-free density functional theory. The performance of KEDFs has been demonstrated by several clusters encompassing Mg, Si and GaAs. The results show that our constructed KEDFs can achieve high numerical accuracy and stability for random clusters, therefore, making orbital-free density functional theory accessible for practical simulations of isolated systems.

cond-mat.mtrl-sci↗

arXiv2020

Experimental Syntheses of Sodalite-like Clathrate EuH$_6$ and EuH$_9$ at Extreme Pressures

The recent discovery of a class of sodalite-like clathrate superhydrides (e.g., YH6, YH9, ThH9, ThH10, and LaH10) at extreme pressures, which exhibit commonly a high-temperature superconductivity with the highest Tc approaching 260 K for LaH10, opened up a new era in search of high-temperature superconductors in metal superhydrides. There is a high interest towards the finding of alternative clathrate superhydrides that might witness the long-dreamed room-temperature superconductivity. Here, we target on the experimental synthesis of strongly-correlated europium (Eu) superhydrides where theory can fail for the prediction of superconductivity. We pressurized and laser-heated the mixture of metal Eu and ammonia borane (NH3BH3) in a diamond anvil cell and successfully synthesized the sodalite-like clathrate EuH6 and EuH9 at conditions of 152 GPa and 1,700 K, and 170 GPa and 2,800 K, respectively. Two non-clathrate structured phases of EuH5 and EuH6 were also synthesized that are not reported in lanthanide superhydrides. Calculated large H-derived electronic density of states at the Fermi level in clathrate EuH6 implies the potential of high temperature superconductivity. Our work created a model superhydride platform for subsequent investigation on how strongly-correlated effect in electronic structure can affect the superconductivity of superhydrides, a phenomenon that is not known thus far.

physics.chem-ph↗

arXiv2019

Metallic liquid H3O in a thin-shell zone inside Uranus and Neptune

The Solar System harbors deep unresolved mysteries despite centuries-long study. A highly intriguing case concerns anomalous non-dipolar and non-axisymmetric magnetic fields of Uranus and Neptune that have long eluded explanation by the prevailing theory. A thin-shell dynamo conjecture captures observed phenomena but leaves unexplained fundamental material basis and underlying mechanism. Here, we report the discovery of trihydrogen oxide (H3O) in metallic liquid state stabilized at extreme pressure and temperature conditions inside these icy planets. Calculated stability pressure field compared to known pressure-radius relation for Uranus and Neptune places metallic liquid H3O in a thin-shell zone near planetary cores. These findings from accurate quantum mechanical calculations rationalize the empirically conjectured thin-shell dynamo model and establish key physical benchmarks that are essential to elucidating the enigmatic magnetic-field anomaly of Uranus and Neptune, resolving a major mystery in planetary science.

physics.comp-ph↗

arXiv2019

High-pressure hybrid materials that can store hydrogen in table salt

We demonstrate in this paper that high pressure can promote the reactions between the ionic compounds and H2 molecules and form thermodynamically stable hybrid compounds. Using crystal structure search method based on first principles calculations and particle swarm optimization algorithm, we show that many alkali halides XY (X=Na, K, Rb, Cs; Y=Cl, Br, I) can form stable hybrid compounds with various H2 compositions under different pressures that could be as low as 0.8 GPa (KIH2). Especially, the commonly known table salt, NaCl, can form stable NaClH2 and NaCl(H2)4 hybrid compounds under pressures of 19.7 and 37.9 GPa, respectively. Our results demonstrate that pressure can promote the formation of solid-molecule hybrid compounds, which reveals a new unique way of discovering novel materials that can combine the advantages of inorganic compounds and small molecules. A direct application of our work is the proof of turning the common table salt and other similar ionic compounds into hydrogen storage materials under moderate pressures.

cond-mat.mtrl-sci↗

arXiv2018

Accelerating CALYPSO Structure Prediction by Data-driven Learning of Potential Energy Surface

Ab initio structure prediction methods have been nowadays widely used as powerful tools for structure searches and material discovery. However, they are generally restricted to small systems owing to the heavy computational cost of underlying density functional theory (DFT) calculations. In this work, by combining state-of-art machine learning (ML) potential with our in-house developed CALYPSO structure prediction method, we developed two acceleration schemes for structure prediction toward large systems, in which ML potential is pre-constructed to fully replace DFT calculations or trained in an on-the-fly manner from scratch during the structure searches. The developed schemes have been applied to medium- and large-sized boron clusters, which are challenging cases for both construction of ML potentials and extensive structure searches. Experimental structures of B36 and B40 clusters can be readily reproduced, and the putative global minimum structure for B84 cluster is proposed, where substantially less computational cost by several orders of magnitude is evident if compared with full DFT-based structure searches. Our results demonstrate a viable route for structure prediction toward large systems via the combination of state-of-art structure prediction methods and ML techniques.

cond-mat.mtrl-sci↗

arXiv2017

Construction of crystal structure prototype database: methods and applications

Crystal structure prototype data have become a useful source of information for materials discovery in the fields of crystallography, chemistry, physics, and materials science. This work reports the development of a robust and efficient method for assessing the similarity of structures on the basis of their interatomic distances. Using this method, we proposed a simple and unambiguous definition of crystal structure prototype based on hierarchical clustering theory, and constructed the Crystal Structure Prototype Database (CSPD) by filtering the known crystallographic structures in a database. With similar method, a program Structure Prototype Analysis Package (SPAP) was developed to remove similar structures in CALYPSO prediction results and extract predicted low energy structures for a separate theoretical structure database. A series of statistics describing the distribution of crystal structure prototypes in the CSPD was compiled to provide an important insight for structure prediction and high-throughput calculations. Illustrative examples of the application of the proposed database are given, including the generation of initial structures for structure prediction and determination of the prototype structure in databases. These examples demonstrate the CSPD to be a generally applicable and useful tool for materials discovery.

cond-mat.mtrl-sci↗

arXiv2016

Sn(II)-containing phosphates as optoelectronic materials

We theoretically investigate Sn(II) phosphates as optoelectronic materials using first principles calculations. We focus on known prototype materials Sn$_n$P$_2$O$_{5+n}$ (n=2, 3, 4, 5) and a previously unreported compound, SnP$_2$O$_6$ (n=1), which we find using global optimization structure prediction. The electronic structure calculations indicate that these compounds all have large band gaps above 3.2 eV, meaning their transparency to visible light. Several of these compounds show relatively low hole effective masses ($\sim$2-3 m$_0$), comparable the electron masses. This suggests potential bipolar conductivity depending on doping. The dispersive valence band-edges underlying the low hole masses, originate from the anti-bonding hybridization between the Sn 5s orbitals and the phosphate groups. Analysis of structure-property relationships for the metastable structures generated during structure search shows considerable variation in combinations of band gap and carrier effective masses, implying chemical tunability of these properties. The unusual combinations of relatively high band gap, low carrier masses and high chemical stability suggests possible optoelectronic applications of these Sn(II) phosphates, including p-type transparent conductors. Related to this, calculations for doped material indicate low visible light absorption, combined with high plasma frequencies.

cond-mat.mtrl-sci↗

arXiv2016

Design of ternary alkaline-earth metal Sn(II) oxides with potential good p-type conductivity

Oxides with good p-type conductivity have been long sought after to achieve high performance all-oxide optoelectronic devices. Divalent Sn(II) based oxides are promising candidates because of their rather dispersive upper valence bands caused by the Sn-5s/O-2p anti-bonding hybridization. There are so far few known Sn(II) oxides being p-type conductive suitable for device applications. Here, we present via first-principles global optimization structure searches a material design study for a hitherto unexplored Sn(II)-based system, ternary alkaline-earth metal Sn(II) oxides in the stoichiometry of MSn2O3 (M = Mg, Ca, Sr, Ba). We identify two stable compounds of SrSn2O3 and BaSn2O3, which can be stabilized by Sn-rich conditions in phase stability diagrams. Their structures follow the Zintl behaviour and consist of basic structural motifs of SnO3 tetrahedra. Unexpectedly they show distinct electronic properties with band gaps ranging from 1.90 (BaSn2O3) to 3.15 (SrSn2O3) eV, and hole effective masses ranging from 0.87 (BaSn2O3) to above 6.0 (SrSn2O3) m0. Further exploration of metastable phases indicates a wide tunability of electronic properties controlled by the details of the bonding between the basic structural motifs. This suggests further exploration of alkaline-earth metal Sn(II) oxides for potential applications requiring good p-type conductivity such as transparent conductors and photovoltaic absorbers.

cond-mat.mtrl-sci↗

arXiv2016

High-pressure Phase Stability and Superconductivity of Pnictogen Hydrides and Chemical Trends for Compressed Hydrides

Binary hydrides formed by the pnictogens of phosphorus, arsenic and antimony are studied at high pressures using first principles methods. Stable structures are predicted and their electronic, vibrational and superconducting properties are investigated. We predict that SbH$_{4}$ and AsH$_{8}$ will be high-temperature superconductors at megabar pressures, with critical temperatures in excess of 100 K. The highly symmetric hexagonal SbH$_{4}$ phase is predicted to be stabilized above about 150 GPa, which is readily achievable in diamond anvil cell experiments. We find that all phosphorus hydrides are metastable with respect to decomposition into the elements within the pressure range studied. Trends based on our results and literature data reveal a connection between the high-pressure behaviors and ambient-pressure chemical quantities which provides insight into understanding which elements may form hydrogen-rich high-temperature superconducting phases at high pressures.

cond-mat.supr-con↗

arXiv2016

Inverse Design of Inorganic Electrides

Electrides are ionic solids that consist of cationic frameworks and anionic electrons trapped in the voids of lattices. Organic electrides exist in a large abundance, but the thermal instability at room temperature and sensitivity to moisture are bottlenecks that limit their practical uses. Known inorganic electrides are rare but appear to have high thermal and chemical stability and exhibit promising applications as electron-emitting materials, superior catalysts and strong reducing agents. Here, we report a developed inverse-design method that can be used to search for a large variety of inorganic electrides. Our method utilizes the intrinsic property of interstitial electron localization of electrides as the global variable function being incorporated into the swarm-intelligence based structure searches. Through screening 99 binary ionic compounds, we have designed 89 new inorganic electrides that are classified into three-, two-, and zero-dimensional species according to the way that the interstitial electrons are localized and the conductive properties of the systems. Our work reveals the rich abundance of inorganic electrides by extending them into more general forms and provides new structure types for electrides that are not thought of as before.

cond-mat.mtrl-sci↗

arXiv2016

A linear scaling method to evaluate the ion-electron potential of crystalline solids

We propose a simple linear scaling expression in reciprocal space for evaluating the ion--electron potential of crystalline solids. The expression replaces the long-range ion--electron potential with an equivalent localized charge distribution and corresponding boundary conditions on the unit cell. Given that no quadratic scaling structure factor is required---as used in traditional methods---the expression shows inherent linear behavior, and is well suited to simulating large-scale systems within orbital-free density functional theory. The scheme is implemented in the ATLAS software package and benchmarked by using a solid Mg bcc lattice containing tens of thousands of atoms in the unit cell. The test results show that the method can efficiently model large crystals with high computational accuracy.

cond-mat.mtrl-sci↗

arXiv2015

Quantum Hydrogen-Bond Symmetrization and High-Temperature Superconductivity in Hydrogen Sulfide

Hydrogen compounds are peculiar as the quantum nature of the proton can crucially affect their structural and physical properties. A remarkable example are the high-pressure phases of H$_2$O, where quantum proton fluctuations favor the symmetrization of the H bond and lower by 30 GPa the boundary between the asymmetric structure and the symmetric one. Here we show that an analogous quantum symmetrization occurs in the recently discovered sulfur hydride superconductor with the record superconducting critical temperature $T_c=203$ K at 155 GPa. In this system, according to classical theory, superconductivity occurs via formation of a structure of stoichiometry H$_3$S with S atoms arranged on a body-centered-cubic (bcc) lattice. For $P \gtrsim 175$ GPa, the H atoms are predicted to sit midway between two S atoms, in a structure with $Im\bar3m$ symmetry. At lower pressures the H atoms move to an off-center position forming a short H$-$S covalent bond and a longer H$\cdots$S hydrogen bond, in a structure with $R3m$ symmetry. X-ray diffraction experiments confirmed the H$_3$S stoichiometry and the S lattice sites, but were unable to discriminate between the two phases. Our present ab initio density-functional theory (DFT) calculations show that the quantum nuclear motion lowers the symmetrization pressure by 72 GPa. Consequently, we predict that the $Im\bar3m$ phase is stable over the whole pressure range within which a high $T_c$ was measured. The observed pressure-dependence of $T_c$ is closely reproduced in our calculations for the $Im\bar3m$ phase, but not for the $R3m$ phase. Thus, the quantum nature of the proton completely rules the superconducting phase diagram of H$_3$S.

cond-mat.supr-con↗

arXiv2015

Dissociation products and structures of solid H2S at strong compression

Hydrogen sulfides have recently received a great deal of interest due to the record high superconducting temperatures of up to 203 K observed on strong compression of dihydrogen sulfide (H2S). A joint theoretical and experimental study is presented in which decomposition products and structures of compressed H2S are characterized, and their superconducting properties are calculated. In addition to the experimentally known H2S and H3S phases, our first-principles structure searches have identified several energetically competitive stoichiometries that have not been reported previously; H2S3, H3S2, and H4S3. In particular, H4S3 is predicted to be thermodynamically stable within a large pressure range of 25-113 GPa. High-pressure room-temperature X-ray diffraction measurements confirm the presence of H3S and H4S3 through decomposition of H2S that emerge at 27 GPa and coexist with residual H2S, at least up to the highest pressure studied in our experiments of 140 GPa. Electron-phonon coupling calculations show that H4S3 has a small Tc of below 2 K, and that H2S is mainly responsible for the observed superconductivity of samples prepared at low temperature (<100K).

cond-mat.supr-con↗

arXiv2015

Metallic Icosahedron Phase of Sodium at Terapascal Pressures

Alkali metals exhibit unexpected structures and electronic behavior at high pressures. Compression of metallic sodium (Na) to 200 GPa leads to the stability of a wide-band-gap insulator with the double hexagonal hP4 structure. Post-hP4 structures remain unexplored, but they are important for addressing the question of the pressure at which Na reverts to a metal. Here we report the reentrant metallicity of Na at the very high pressure of 15.5 terapascal (TPa), predicted using first-principles structure searching simulations. Na is therefore insulating over the large pressure range of 0.2-15.5 TPa. Unusually, Na adopts an oP8 structure at pressures of 117-125 GPa, and the same oP8 structure at 1.75-15.5 TPa. Metallization of Na occurs on formation of a stable and striking body-centered cubic cI24 electride structure consisting of Na12 icosahedra, each housing at its center about one electron which is not associated with any Na ions.

cond-mat.mtrl-sci↗

arXiv2015

ATLAS: A Real-Space Finite-Difference Implementation of Orbital-Free Density Functional Theory

Orbital-free density functional theory (OF-DFT) is a promising method for large-scale quantum mechanics simulation as it provides a good balance of accuracy and computational cost. Its applicability to large-scale simulations has been aided by progress in constructing kinetic energy functionals and local pseudopotentials. However, the widespread adoption of OF-DFT requires further improvement in its efficiency and robustly implemented software. Here we develop a real-space finite-difference method for the numerical solution of OF-DFT in periodic systems. Instead of the traditional self-consistent method, a powerful scheme for energy minimization is introduced to solve the Euler--Lagrange equation. Our approach engages both the real-space finite-difference method and a direct energy-minimization scheme for the OF-DFT calculations. The method is coded into the ATLAS software package and benchmarked using periodic systems of solid Mg, Al, and Al$_{3}$Mg. The test results show that our implementation can achieve high accuracy, efficiency, and numerical stability for large-scale simulations.

physics.comp-ph↗