arXiv subjects

Yanran Ding

Publications and source records attributed to Yanran Ding.

10 recordsLinked to original sources

arXiv2026

SurGE: Surrogate Gradient-guided Evolution for Co-design of Legged Robots with Parallel Elasticity

Co-design of legged robots with elastic elements is challenging due to the non-differentiability of contact dynamics and mechanism engagement. This paper presents SurGE, a framework that computes surrogate gradients of the design objective through a differentiable pipeline consisting of a kinodynamic single-rigid-body (Kino-SRB) model and a design-aware control policy, and injects them into CMA-ES via mean shift with cosine-annealed step decay. On a 4-DOF design space of a hopping robot with unidirectional parallel spring, SurGE achieves 6 times lower cross-seed standard deviation and 18% tighter population concentration compared to vanilla CMA-ES, while matching or improving the best objective. Hardware experiments on a 2D design subspace show that, starting from a hand-tuned initial design, SurGE reduces the design objective by 37.65% on hardware, with the improvement trend identified in simulation transferring consistently to the physical system. SurGE provides the potential to accelerate non-differentiable co-design problems in legged robots via surrogate model gradients.

cs.RO↗

arXiv2026

Mobile Pedipulation for Object Sliding via Hierarchical Control on a Wheeled Bipedal Robot

In this letter, we present a hierarchical control framework that enables wheeled bipedal robots to perform planar object sliding tasks with their wheeled legs. The proposed approach formulates a nonlinear model predictive controller (NMPC) based on a reduced-order three rigid bodies (TRB) dynamical model that explicitly accounts for the hip roll degree of freedom and multiple wheel-environment contact modes, which is essential for lateral stepping and pedipulation tasks. Within this framework, the NMPC simultaneously regulates robot locomotion and interaction forces, allowing the robot to stably execute both rolling and object manipulation behaviors. A trajectory-optimization-based robot-object motion planner is developed to generate reference motions that incorporate stick-slip transitions in ground-object contact. Two representative pedipulation motions, namely scooting and lateral sliding, are validated through real-world hardware experiments, in which the robot successfully retrieves a 1 kg object from under a desk and slides a 4 kg object over a distance of 0.228 m via scooting.

cs.RO↗

arXiv2025

Contact Sensing via Joint Torque Sensors and a Force/Torque Sensor for Legged Robots

This paper presents a method for detecting and localizing contact along robot legs using distributed joint torque sensors and a single hip-mounted force-torque (FT) sensor using a generalized momentum-based observer framework. We designed a low-cost strain-gauge-based joint torque sensor that can be installed on every joint to provide direct torque measurements, eliminating the need for complex friction models and providing more accurate torque readings than estimation based on motor current. Simulation studies on a floating-based 2-DoF robot leg verified that the proposed framework accurately recovers contact force and location along the thigh and shin links. Through a calibration procedure, our torque sensor achieved an average 96.4% accuracy relative to ground truth measurements. Building upon the torque sensor, we performed hardware experiments on a 2-DoF manipulator, which showed sub-centimeter contact localization accuracy and force errors below 0.2 N.

cs.RO↗

arXiv2025

Kinodynamic Model Predictive Control for Energy Efficient Locomotion of Legged Robots with Parallel Elasticity

In this paper, we introduce a kinodynamic model predictive control (MPC) framework that exploits unidirectional parallel springs (UPS) to improve the energy efficiency of dynamic legged robots. The proposed method employs a hierarchical control structure, where the solution of MPC with simplified dynamic models is used to warm-start the kinodynamic MPC, which accounts for nonlinear centroidal dynamics and kinematic constraints. The proposed approach enables energy efficient dynamic hopping on legged robots by using UPS to reduce peak motor torques and energy consumption during stance phases. Simulation results demonstrated a 38.8% reduction in the cost of transport (CoT) for a monoped robot equipped with UPS during high-speed hopping. Additionally, preliminary hardware experiments show a 14.8% reduction in energy consumption. Video: https://youtu.be/AF11qMXJD48

cs.RO↗

arXiv2022

Humanoid Self-Collision Avoidance Using Whole-Body Control with Control Barrier Functions

This work combines control barrier functions (CBFs) with a whole-body controller to enable self-collision avoidance for the MIT Humanoid. Existing reactive controllers for self-collision avoidance cannot guarantee collision-free trajectories as they do not leverage the robot's full dynamics, thus compromising kinematic feasibility. In comparison, the proposed CBF-WBC controller can reason about the robot's underactuated dynamics in real-time to guarantee collision-free motions. The effectiveness of this approach is validated in simulation. First, a simple hand-reaching experiment shows that the CBF-WBC enables the robot's hand to deviate from an infeasible reference trajectory to avoid self-collisions. Second, the CBF-WBC is combined with a linear model predictive controller (LMPC) designed for dynamic locomotion, and the CBF-WBC is used to track the LMPC predictions. Walking experiments show that adding CBFs avoids leg self-collisions when the footstep location or swing trajectory provided by the high-level planner are infeasible for the real robot, and generates feasible arm motions that improve disturbance recovery.

cs.RO↗

arXiv2022

Orientation-Aware Model Predictive Control with Footstep Adaptation for Dynamic Humanoid Walking

This paper proposes a novel orientation-aware model predictive control (MPC) for dynamic humanoid walking that can plan footstep locations online. Instead of a point-mass model, this work uses the augmented single rigid body model (aSRBM) to enable the MPC to leverage orientation dynamics and stepping strategy within a unified optimization framework. With the footstep location as part of the decision variables in the aSRBM, the MPC can reason about stepping within the kinematic constraints. A task-space controller (TSC) tracks the body pose and swing leg references output from the MPC, while exploiting the full-order dynamics of the humanoid. The proposed control framework is suitable for real-time applications since both MPC and TSC are formulated as quadratic programs. Simulation investigations show that the orientation-aware MPC-based framework is more robust against external torque disturbance compared to state-of-the-art controllers using the point mass model, especially when the torso undergoes large angular excursion. The same control framework can also enable the MIT Humanoid to overcome uneven terrains, such as traversing a wave field.

cs.RO↗

arXiv2021

HOPPY: An Open-source Kit for Education with Dynamic Legged Robots

This paper introduces HOPPY, an open-source, low-cost, robust, and modular kit for robotics education. The robot dynamically hops around a rotating gantry with a fixed base. The kit is intended to lower the entry barrier for studying dynamic robots and legged locomotion with real systems. It bridges the theoretical content of fundamental robotic courses with real dynamic robots by facilitating and guiding the software and hardware integration. This paper describes the topics which can be studied using the kit, lists its components, discusses preferred practices for implementation, presents results from experiments with the simulator and the real system, and suggests further improvements. A simple heuristic-based controller is described to achieve velocities up to 1.7m/s, navigate small objects, and mitigate external disturbances when the robot is aided by a counterweight. HOPPY was utilized as the subject of a semester-long project for the Robot Dynamics and Control course at the University of Illinois at Urbana-Champaign. The positive feedback from the students and instructors about the hands-on activities during the course motivates us to share this kit and continue improving in the future.

cs.RO↗

arXiv2020

Representation-Free Model Predictive Control for Dynamic Motions in Quadrupeds

This paper presents a novel Representation-Free Model Predictive Control (RF-MPC) framework for controlling various dynamic motions of a quadrupedal robot in three dimensional (3D) space. Our formulation directly represents the rotational dynamics using the rotation matrix, which liberates us from the issues associated with the use of Euler angles and quaternion as the orientation representations. With a variation-based linearization scheme and a carefully constructed cost function, the MPC control law is transcribed to the standard Quadratic Program (QP) form. The MPC controller can operate at real-time rates of 250 Hz on a quadruped robot. Experimental results including periodic quadrupedal gaits and a controlled backflip validate that our control strategy could stabilize dynamic motions that involve singularity in 3D maneuvers.

cs.RO↗

arXiv2020

Kinodynamic Motion Planning for Multi-Legged Robot Jumping via Mixed-Integer Convex Program

This paper proposes a kinodynamic motion planning framework for multi-legged robot jumping based on the mixed-integer convex program (MICP), which simultaneously reasons about centroidal motion, contact points, wrench, and gait sequences. This method uniquely combines configuration space discretization and the construction of feasible wrench polytope (FWP) to encode kinematic constraints, actuator limit, friction cone constraint, and gait sequencing into a single MICP. The MICP could be efficiently solved to the global optimum by off-the-shelf numerical solvers and provide highly dynamic jumping motions without requiring initial guesses. Simulation and experimental results demonstrate that the proposed method could find novel and dexterous maneuvers that are directly deployable on the two-legged robot platform to traverse through challenging terrains.

cs.RO↗

arXiv2020

HOPPY: An open-source and low-cost kit for dynamic robotics education

This letter introduces HOPPY, an open-source, low-cost, robust, and modular kit for robotics education. The robot dynamically hops around a rotating gantry with a fixed base. The kit lowers the entry barrier for studying dynamic robots and legged locomotion in real systems. The kit bridges the theoretical content of fundamental robotic courses and real dynamic robots by facilitating and guiding the software and hardware integration. This letter describes the topics which can be studied using the kit, lists its components, discusses best practices for implementation, presents results from experiments with the simulator and the real system, and suggests further improvements. A simple controller is described to achieve velocities up to 2m/s, navigate small objects, and mitigate external disturbances (kicks). HOPPY was utilized as the topic of a semester-long project for the Robot Dynamics and Control course at the University of Illinois at Urbana-Champaign. Students provided an overwhelmingly positive feedback from the hands-on activities during the course and the instructors will continue to improve the kit for upcoming semesters.

cs.RO↗