arXiv subjects

Yanyan Geng

Publications and source records attributed to Yanyan Geng.

15 recordsLinked to original sources

arXiv2026

Vacancy Order and Physical Properties of a Ternary Compound Fe0.68Pd0.80Te with an {\alpha}-Fe1+xTe-Type Structure

We report the identification and characterization of a new compound Fe0.68Pd0.80Te with an {\alpha}-Fe1+xTe prototype structure. Different from the Fe-square net and minor occupancy of interstitial Fe-sites in Fe1+xTe, Fe0.68Pd0.80Te is featured by a Pdsquare net and near 68% occupancy of the corresponding interstitial Fe-sites. Furthermore, noncontact atomic force microscopy and X-ray diffraction provide evidence for the existence of a 3*3*3 Pd-vacancy order in this layered material. A spin-glass ground state below Tg 40 K is identified via magnetic characterization. Electrical transport measurements show that Fe0.68Pd0.80Te is a semiconductor with a very small band gap below 10 meV. It has weak negative magnetoresistance and holelike charge carriers below room temperature. Our results demonstrate its potentials for further exploring various quantum phenomena.

cond-mat.mtrl-sci↗

arXiv2026

Intertwined atomic-nanoscale-microscale structures via intralayer anisotropic Fe-chains in the layered ferromagnet FePd2Te2

Controlling mesoscale and nanoscale material structures and properties through self-organized atomic behavior is essential for atomic-scale manufacturing. However, direct and visual studies on the cross-scale effects of such atomic self-organization on mesoscopic structures remain scarce. Here, we report the intertwined atomic-nanoscale-mesoscale structures via the intralayer Fe-chains in the sandwich-like layered FePd2Te2 crystal by scanning tunneling microscopy (STM) and atomic force microscopy (AFM). The hierarchical orthogonal corrugated morphologies are directly revealed and attributed to its chain-orientation-determined twinning-domain effect. Both Fe-chains of middle-sublayer and two kinds of Te atoms of top-sublayer are further atomically resolved at the sub-Å level, indicating the critical effects of Pd-atoms/voids on the intra-layer anisotropic Fe-chains and the interlayer structural alignment. The thermal-induced and strain-related structural transitions of surface layer are further investigated and discussed based on the proposed filling model of Pd-voids by the intralayer Pd-atoms. Our work not only provides deep understanding of this exotic layered magnetic material, and will inspire more perspectives for tailoring its anisotropic atomic-to-mesoscale structures and properties.

cond-mat.mtrl-sci↗

arXiv2025

Realization of polytype heterostructures via delicate structural transitions from a doped-Mott insulator

Transition metal dichalcogenides (TMDs) host multiple competing structural and electronic phases, making them an ideal platform for constructing polytype heterostructures with emergent quantum properties. However, controlling phase transitions to form diverse heterostructures inside a single crystal remains challenging. Here, we realize vertical/lateral polytype heterostructures in a hole-doped Mott insulator via thermal-annealing-induced structural transitions. Raman spectroscopy, atomic force microscopy (AFM) and scanning Kelvin probe force microscopy (SKPM) confirm the coexistence of T-H polytype heterostructures. Atomic-scale scanning tunneling microscopy/spectroscopy (STM/STS) measurements reveal the transparent effect in 1H/1T vertical heterostructures, where the charge density wave (CDW) of the underlying 1T-layer superposes on the top 1H-layer under positive bias. By systematically comparing 1T/1H and 1T/1T interfaces, we demonstrate that the metallic 1H-layer imposes a Coulomb screening effect on the 1T-layer, suppressing the formation of CDW domain walls and forming more ordered electronic states. These results clarify the interfacial coupling between distinct quantum many-body phases and establish a controllable pathway for constructing two-dimensional polytype heterostructures with tunable electronic properties.

cond-mat.mtrl-sci↗

arXiv2025

Unveiling the delicate "hidden" interface conditions in WS2 flakes by advanced atomic force microscopy

The delicate interfacial conditions and behaviors play critical roles in determining the valuable physical properties of two-dimensional materials and their heterostructures on substrates. However, directly probing these complex interface conditions remains challenging. Here, we reveal the coupled in-plane strain and out-of-plane bonding conditions in strain-engineered WS2 flakes by combining dual-harmonic electrostatic force microscopy (DH-EFM) and scanning microwave impedance microscopy (sMIM). A striking contradiction is observed between the compressive-strain-induced larger bandgap (lower electrical conductivity) detected by DH-EFM, and the enhanced conductivity probed by sMIM. Comparative measurements under different sMIM modes demonstrate that this contradiction originates from a tip-loading-force-induced dynamic puckering effect, which is governed by the interfacial bonding strength. Furthermore, the progressive accumulation and subsequent release of conductivity during forward/backward sMIM-contact scans further confirms this dynamic puckering behavior, revealing pronounced differences in interface conditions between the open- and closed-ring regions of WS2. This work resolves the correlation between electrical properties and interface conditions, and provides fundamental insights for interface-engineered devices.

cond-mat.mtrl-sci↗

arXiv2025

Real-space titration and manipulation of particle-like correlated electrons in doped Mott insulator

The localized (particle-like) correlated electrons deserve particular attention as they govern various exotic quantum phenomena, such as quantum spin liquids, Wigner crystals, and Mott insulators in correlated systems. However, direct observation and manipulation of these particle-like electrons at the atomic or single-electron scale remain highly challenging. Here, we successfully realize and directly visualize particle-like correlated electrons in 1T-TaS2 through hole doping. The potential-dependent local electronic structure of single particle-like electron is revealed by angle-resolved photoemission spectroscopy (ARPES), scanning tunneling spectroscopy (STS) combined with theoretical calculations. The complex correlated interactions including nearest-neighbor attractive interactions and many-body repulsive interactions are further demonstrated and discussed based on the spatial distribution of particle-like electrons. Furthermore, the tentative manipulation of the particle-like electrons is successfully achieved by the energy-excitation mechanism. Our results not only provide profound insights into particle-like electrons in correlated systems, but also establish a versatile platform for designing and controlling quantum states at the atomic scale.

cond-mat.str-el↗

arXiv2025

Atomic to mesoscale hierarchical structures and magnetic states in an anisotropic layered ferromagnet FePd2Te2

Two-dimensional (2D) magnetic materials have predominantly exhibited easy-axis or easy-plane anisotropy and display a high sensitivity to the underlying crystal structure and lattice symmetry. Recently, an in-plane anisotropic 2D ferromagnet of FePd2Te2 has been discovered with intriguing structure and quasi-one-dimensional spin system. Here, we report a real-space investigation of its twinning structure and magnetic states using atomic/magnetic force microscopy (AFM/MFM) combined with scanning tunneling microscopy (STM). The atomic to mesoscale hierarchical structures with the orthogonal and corrugated compressive /tensile(C/T) regions are directly observed due to the intrinsic twinning-domain characteristic. The structure-related intact ferromagnetic (FM), field-induced polarized-FM states and their transitions are comparatively discussed at the mesoscale with the corresponding macroscopic magnetic measurements. Temperature- and field-dependent evolution of magnetic phase are further investigated at the FM and PM states, and summarized to obtain a unique H-T phase diagram of FePd2Te2. Our work provides key results for understanding the complicated magnetic properties of FePd2Te2, and suggests new directions for manipulating magnetic states through the atomic and mesoscale structure engineering.

cond-mat.mtrl-sci↗

arXiv2025

Tailoring composite skyrmionic spin textures in an above-room-temperature ferromagnet Fe3-xGaTe2

Realizing room-temperature tunable skyrmionic objects in van der Waals ferromagnet offers unparalleled prospects for future spintronics. Here, we report an experimental investigation on the emergence and evolution of skyrmionic spin textures in the non-stoichiometric Fe3-xGaTe2 using magnetic force microscopy. The iron-deficiency-specific magnetic states of stripe, striped skyrmionium and striped skyrmion sack are observed. Through zero-field-cooling and field-cooling measurements, we observed distinct topological transitions and trivial transitions (distinguished by changes in topological charge) emerging during the stepwise evolution of topological spin textures, which enabled us to develop an evolution pathway model. Leveraging this model, the room-temperature stable composite topological spin textures of skyrmionium, skyrmion bag and sack states are further controllably realized via the exclusive topological-transition path (regulated by magnetic field and DMI intensity). Our work provides valuable insights into the room-temperature realization of topological spin textures in Fe3-xGaTe2, and inspires further exploration of their potential applications in heterostructure spintronics.

cond-mat.mtrl-sci↗

arXiv2025

Filling-dependent intertwined electronic and atomic orders in the flat-band state of 1T-TaS2

The delicate interplay among the complex intra-/inter-layer electron-electron and electron-lattice interactions is the fundamental prerequisite of these exotic quantum states, such as superconductivity, nematic order, and checkerboard charge order. Here we explore the filling-dependent multiple stable intertwined electronic and atomic orders of flat-band state of 1T-TaS2 encompassing hole order, phase orders, coexisting left- and right-chiral orders and mixed phase/chiral orders via scanning tunneling microscopy (STM). Combining first-principles calculations, the emergent electronic/atomic orders can be attributed to the weakening of electron-electron correlations and stacking-dependent interlayer interactions. Moreover, achiral intermediate ring-like clusters and nematic charge density wave (CDW) states are successfully realized in intralayer chiral domain wall and interlayer heterochiral stacking regions through chiral overlap configurations. Our study not only deepens the understanding of filling-dependent electronic/atomic orders in flat-band systems, but also offers perspectives for exploring exotic quantum states in correlated electronic systems.

cond-mat.str-el↗

arXiv2024

FePd2Te2: An Anisotropic Two-Dimensional Ferromagnet with One-Dimensional Fe Chains

Two-dimensional (2D) magnets have attracted significant attentions in recent years due to their importance in the research on both fundamental physics and spintronic applications. Here, we report the discovery of a new ternary compound FePd2Te2. It features a layered quasi-2D crystal structure with one-dimensional Fe zigzag chains extending along the b-axis in the cleavage plane. Single crystals of FePd2Te2 with centimeter-size could be grown. Density functional theory calculations, mechanical exfoliation and atomic force microscopy on these crystals reveal that they are 2D materialsthat can be thinned down to 5 nm. Magnetic characterization shows that FePd2Te2 is an easy-plane ferromagnet with Tc 183 K and strong in-plane uniaxial magnetic anisotropy. Magnetoresistance and anomalous Hall effect demonstrate that ferromagnetism could maintain in FePd2Te2 flakes with large coercivity. A crystal twinning effect is observed by scanning tunneling microscopy which makes the Fe chains right-angle bent in the cleavage plane and creates an intriguing spin texture. Our results show that FePd2Te2 is a correlated anisotropic 2D magnets that may attract multidisciplinary research interests.

cond-mat.mtrl-sci↗

arXiv2024

Correlated electrons of the flat band in charge density wave state of 4Hb-TaSexS2-x

Many intriguing quantum states of matter, such as unconventional superconductivity, magnetic phases and fractional quantum Hall physics, emergent from the spatially-correlated localized electrons in the flat band of solid materials. By using scanning tunneling microscopy and spectroscopy (STM/STS), we report the real-space investigation of correlated electrons in the flat band of superlattice 4Hb-TaSexS2-x. In contrast with the pristine 4Hb-TaS2, the selenium (Se) substitutions significantly affect the interfacial transfer of correlated electrons between the CDW states of 1T- and 1H-TaS2 layers, and contribute a real-space fractional electron-filling configurations with the distributed electron-filled and -void SoD clusters of 1T-layer. The site-specific STS spectra directly reveal their respective prominent spectra weight above EF and symmetric Mott-like spectra. In addition, the spatial distributions of these electron-filled SoDs in the 1T-layer of 4Hb-TaSe0.7S1.3 demonstrate different local short-range patterning, clearly indicating the complex neighboring interactions among the localized electrons in the flat band of 1T-layer. Our results not only provide an in-depth insight of correlated electrons in the flat CDW band, and provide a simple platform to manipulate the electron-correlation-related quantum states.

cond-mat.mtrl-sci↗

arXiv2023

Electronic Janus lattice and kagome-like bands in coloring-triangular MoTe2 monolayers

Polymorphic structures of transition-metal dichalcogenides (TMDs) host exotic electronic states, like charge density wave and superconductivity. However, the number of these structures is limited by crystal symmetries, which poses a challenge to achieve tailored lattices and properties both theoretically and experimentally. Here, we report a coloring-triangle (CT) latticed MoTe2 monolayer, termed CT-MoTe2, constructed by controllably introducing uniform and ordered mirror-twin-boundaries into a pristine monolayer in molecular beam epitaxy. Low-temperature scanning tunneling microscopy and spectroscopy (STM/STS) together with theoretical calculations reveal that the monolayer has an electronic Janus lattice, i.e., an energy-dependent atomic-lattice and a pseudo-Te sublattice, and shares the identical geometry with the Mo5Te8 layer. Dirac-like and flat electronic bands inherently existing in the CT lattice are identified by two broad and two prominent peaks in STS spectra, respectively, and verified with density-functional-theory calculations. Two types of intrinsic domain boundaries were observed, in one of which the electronic-Janus-lattice feature maintains, implying potential applications as an energy-tunable electron-tunneling barrier in future functional devices.

cond-mat.mtrl-sci↗

arXiv2023

Emergent Electronic Kagome Lattice in Correlated Charge-Density-Wave State of 1T-TaS$_2$

Quantum materials with tunable correlated and/or topological electronic states, such as the electronic Kagome lattice, provide an ideal platform to study the exotic quantum properties. However, the real-space investigations on the correlated electronic Kagome lattice have been rarely reported. Herein, we report on the electronic Kagome lattice emerging in the correlated charge-density-wave (CDW) state of 1T-TaS$_2$ at ~200 K via variable-temperature scanning tunneling microscopy (VT-STM). This emergent Kagome lattice can be considered a fractional electron-filling superstructure with reduced translational and rotational symmetries, confirmed by STM measurements and density functional theory simulations. The characteristic band structure and density of states of this electronic Kagome lattice are further explored based on theoretical calculations. Our results demonstrate a self-organized electronic Kagome lattice from the correlated CDW state via the effective tuning parameter of temperature and provide a platform to directly explore the interplay of correlated electrons and topological physics.

cond-mat.mtrl-sci↗

arXiv2021

Epitaxial fabrication of AgTe monolayer on Ag(111) and the sequential growth of Te film

Transition-metal chalcogenides (TMCs) materials have attracted increasing interest both for fundamental research and industrial applications. Among all these materials, two-dimensional (2D) compounds with honeycomb-like structure possess exotic electronic structures. Here, we report a systematic study of TMC monolayer AgTe fabricated by direct depositing Te on the surface of Ag(111) and annealing. Few intrinsic defects are observed and studied by scanning tunneling microscopy, indicating that there are two kinds of AgTe domains and they can form gliding twin-boundary. Then, the monolayer AgTe can serve as the template for the following growth of Te film. Meanwhile, some Te atoms are observed in the form of chains on the top of the bottom Te film. Our findings in this work might provide insightful guide for the epitaxial growth of 2D materials for study of novel physical properties and for future quantum devices.

cond-mat.mtrl-sci↗

arXiv2017

A novel image tag completion method based on convolutional neural network

In the problems of image retrieval and annotation, complete textual tag lists of images play critical roles. However, in real-world applications, the image tags are usually incomplete, thus it is important to learn the complete tags for images. In this paper, we study the problem of image tag complete and proposed a novel method for this problem based on a popular image representation method, convolutional neural network (CNN). The method estimates the complete tags from the convolutional filtering outputs of images based on a linear predictor. The CNN parameters, linear predictor, and the complete tags are learned jointly by our method. We build a minimization problem to encourage the consistency between the complete tags and the available incomplete tags, reduce the estimation error, and reduce the model complexity. An iterative algorithm is developed to solve the minimization problem. Experiments over benchmark image data sets show its effectiveness.

cs.CV↗

arXiv2017

Learning convolutional neural network to maximize Pos@Top performance measure

In the machine learning problems, the performance measure is used to evaluate the machine learning models. Recently, the number positive data points ranked at the top positions (Pos@Top) has been a popular performance measure in the machine learning community. In this paper, we propose to learn a convolutional neural network (CNN) model to maximize the Pos@Top performance measure. The CNN model is used to represent the multi-instance data point, and a classifier function is used to predict the label from the its CNN representation. We propose to minimize the loss function of Pos@Top over a training set to learn the filters of CNN and the classifier parameter. The classifier parameter vector is solved by the Lagrange multiplier method, and the filters are updated by the gradient descent method alternately in an iterative algorithm. Experiments over benchmark data sets show that the proposed method outperforms the state-of-the-art Pos@Top maximization methods.

cs.CV↗