arXiv subjects

Yao Wang

Publications and source records attributed to Yao Wang.

At least 253 records · Page 14Linked to original sources

arXiv2022

Three-dimensional Sandglass Magnet with Non-Kramers ions

Magnetic susceptibility, specific heat, and muon spin relaxation ($μ$SR) measurements have been performed on a newly synthesized three-dimensional sandglass-type lattice Tm$_3$SbO$_7$, where two inequivalent sets of non-Kramers Tm$^{3+}$ ions (Tm$^{3+}_1$ and Tm$^{3+}_2)$ show crystal electrical field effect at different temperature ranges. The existence of an ordered or a glassy state down to 0.1~K in zero field is excluded. The low-energy properties of Tm$_3$SbO$_7$ are dominated by the lowest non-Kramers quasi-doublet of $\rm Tm^{3+}_1$, and the energy splitting is regarded as an intrinsic transverse field. Therefore, the low-temperature paramagnetic phenomenon in Tm$_3$SbO$_7$ is explained by a transverse field Ising model, which is supported by the quantitative simulation of specific heat data. In addition, the perturbation from Tm$^{3+}_2$ may play an important role in accounting for the low temperature spin dynamics behavior observed by $μ$SR.

cond-mat.str-el↗

arXiv2022

CDLNet: Noise-Adaptive Convolutional Dictionary Learning Network for Blind Denoising and Demosaicing

Deep learning based methods hold state-of-the-art results in low-level image processing tasks, but remain difficult to interpret due to their black-box construction. Unrolled optimization networks present an interpretable alternative to constructing deep neural networks by deriving their architecture from classical iterative optimization methods without use of tricks from the standard deep learning tool-box. So far, such methods have demonstrated performance close to that of state-of-the-art models while using their interpretable construction to achieve a comparably low learned parameter count. In this work, we propose an unrolled convolutional dictionary learning network (CDLNet) and demonstrate its competitive denoising and joint denoising and demosaicing (JDD) performance both in low and high parameter count regimes. Specifically, we show that the proposed model outperforms state-of-the-art fully convolutional denoising and JDD models when scaled to a similar parameter count. In addition, we leverage the model's interpretable construction to propose a noise-adaptive parameterization of thresholds in the network that enables state-of-the-art blind denoising performance, and near perfect generalization on noise-levels unseen during training. Furthermore, we show that such performance extends to the JDD task and unsupervised learning.

eess.IV↗

arXiv2022

Gabor is Enough: Interpretable Deep Denoising with a Gabor Synthesis Dictionary Prior

Image processing neural networks, natural and artificial, have a long history with orientation-selectivity, often described mathematically as Gabor filters. Gabor-like filters have been observed in the early layers of CNN classifiers and even throughout low-level image processing networks. In this work, we take this observation to the extreme and explicitly constrain the filters of a natural-image denoising CNN to be learned 2D real Gabor filters. Surprisingly, we find that the proposed network (GDLNet) can achieve near state-of-the-art denoising performance amongst popular fully convolutional neural networks, with only a fraction of the learned parameters. We further verify that this parameterization maintains the noise-level generalization (training vs. inference mismatch) characteristics of the base network, and investigate the contribution of individual Gabor filter parameters to the performance of the denoiser. We present positive findings for the interpretation of dictionary learning networks as performing accelerated sparse-coding via the importance of untied learned scale parameters between network layers. Our network's success suggests that representations used by low-level image processing CNNs can be as simple and interpretable as Gabor filterbanks.

eess.IV↗

arXiv2022

Feature Compression for Rate Constrained Object Detection on the Edge

Recent advances in computer vision has led to a growth of interest in deploying visual analytics model on mobile devices. However, most mobile devices have limited computing power, which prohibits them from running large scale visual analytics neural networks. An emerging approach to solve this problem is to offload the computation of these neural networks to computing resources at an edge server. Efficient computation offloading requires optimizing the trade-off between multiple objectives including compressed data rate, analytics performance, and computation speed. In this work, we consider a "split computation" system to offload a part of the computation of the YOLO object detection model. We propose a learnable feature compression approach to compress the intermediate YOLO features with light-weight computation. We train the feature compression and decompression module together with the YOLO model to optimize the object detection accuracy under a rate constraint. Compared to baseline methods that apply either standard image compression or learned image compression at the mobile and perform image decompression and YOLO at the edge, the proposed system achieves higher detection accuracy at the low to medium rate range. Furthermore, the proposed system requires substantially lower computation time on the mobile device with CPU only.

eess.IV↗

arXiv2022

Network-Aware 5G Edge Computing for Object Detection: Augmenting Wearables to "See" More, Farther and Faster

Advanced wearable devices are increasingly incorporating high-resolution multi-camera systems. As state-of-the-art neural networks for processing the resulting image data are computationally demanding, there has been growing interest in leveraging fifth generation (5G) wireless connectivity and mobile edge computing for offloading this processing to the cloud. To assess this possibility, this paper presents a detailed simulation and evaluation of 5G wireless offloading for object detection within a powerful, new smart wearable called VIS4ION, for the Blind-and-Visually Impaired (BVI). The current VIS4ION system is an instrumented book-bag with high-resolution cameras, vision processing and haptic and audio feedback. The paper considers uploading the camera data to a mobile edge cloud to perform real-time object detection and transmitting the detection results back to the wearable. To determine the video requirements, the paper evaluates the impact of video bit rate and resolution on object detection accuracy and range. A new street scene dataset with labeled objects relevant to BVI navigation is leveraged for analysis. The vision evaluation is combined with a detailed full-stack wireless network simulation to determine the distribution of throughputs and delays with real navigation paths and ray-tracing from new high-resolution 3D models in an urban environment. For comparison, the wireless simulation considers both a standard 4G-Long Term Evolution (LTE) carrier and high-rate 5G millimeter-wave (mmWave) carrier. The work thus provides a thorough and realistic assessment of edge computing with mmWave connectivity in an application with both high bandwidth and low latency requirements.

eess.IV↗

arXiv2022

Universal Prony fitting decomposition for optimized hierarchical quantum master equations

In this work, we propose the Prony fitting decomposition (PFD) as an accurate and efficient exponential series method, applicable to arbitrary interacting bath correlation functions. The resulting hierarchical equations of motion (HEOM) formalism is greatly optimized, especially in extremely low temperature regimes that would be inaccessible with other methods. For demonstration, we calibrate the present PFD against the celebrated Padé spectrum decomposition method, followed by converged HEOM evaluations on the single-impurity Anderson model system.

quant-ph↗

arXiv2022

FS6D: Few-Shot 6D Pose Estimation of Novel Objects

6D object pose estimation networks are limited in their capability to scale to large numbers of object instances due to the close-set assumption and their reliance on high-fidelity object CAD models. In this work, we study a new open set problem; the few-shot 6D object poses estimation: estimating the 6D pose of an unknown object by a few support views without extra training. To tackle the problem, we point out the importance of fully exploring the appearance and geometric relationship between the given support views and query scene patches and propose a dense prototypes matching framework by extracting and matching dense RGBD prototypes with transformers. Moreover, we show that the priors from diverse appearances and shapes are crucial to the generalization capability under the problem setting and thus propose a large-scale RGBD photorealistic dataset (ShapeNet6D) for network pre-training. A simple and effective online texture blending approach is also introduced to eliminate the domain gap from the synthesis dataset, which enriches appearance diversity at a low cost. Finally, we discuss possible solutions to this problem and establish benchmarks on popular datasets to facilitate future research. The project page is at \url{https://fs6d.github.io/}.

cs.CV↗

arXiv2022

Chat-Capsule: A Hierarchical Capsule for Dialog-level Emotion Analysis

Many studies on dialog emotion analysis focus on utterance-level emotion only. These models hence are not optimized for dialog-level emotion detection, i.e. to predict the emotion category of a dialog as a whole. More importantly, these models cannot benefit from the context provided by the whole dialog. In real-world applications, annotations to dialog could fine-grained, including both utterance-level tags (e.g. speaker type, intent category, and emotion category), and dialog-level tags (e.g. user satisfaction, and emotion curve category). In this paper, we propose a Context-based Hierarchical Attention Capsule~(Chat-Capsule) model, which models both utterance-level and dialog-level emotions and their interrelations. On a dialog dataset collected from customer support of an e-commerce platform, our model is also able to predict user satisfaction and emotion curve category. Emotion curve refers to the change of emotions along the development of a conversation. Experiments show that the proposed Chat-Capsule outperform state-of-the-art baselines on both benchmark dataset and proprietary dataset. Source code will be released upon acceptance.

cs.CL↗

arXiv2022

Electron transfer under the Floquet modulation in donor-bridge-acceptor systems

Electron transfer (ET) processes are of broad interest in modern chemistry. With the advancements of experimental techniques, one may modulate the ET via such as the light-matter interactions. In this work, we study the ET under a Floquet modulation occurring in the donor-bridge-acceptor systems, with the rate kernels projected out from the exact disspaton equation of motion formalism. This together with the Floquet theorem enables us to investigate the interplay between the intrinsic non-Markovianity and the driving periodicity. The observed rate kernel exhibits a Herzberg-Teller-like mechanism induced by the bridge fluctuation subject to effective modulation.

physics.chem-ph↗

arXiv2022

Strain-induced enhancement of $T_c$ in infinite-layer Pr$_{0.8}$Sr$_{0.2}$NiO$_2$ films

The mechanism of unconventional superconductivity in correlated materials remains a great challenge in condensed matter physics. The recent discovery of superconductivity in infinite-layer nickelates, as analog to high-Tc cuprates, has opened a new route to tackle this challenge. By growing 8 nm Pr0.8Sr0.2NiO2 films on the (LaAlO3)0.3(Sr2AlTaO6)0.7 substrate, we successfully raise the transition temperature Tc from 9 K in the widely studied SrTiO3-substrated nickelates into 15 K. By combining x-ray absorption spectroscopy with the first-principles and many-body simulations, we find a positive correlation between Tc and the pre-edge peak intensity, which can be attributed to the hybridization between Ni and O orbitals induced by the strain. Our result suggests that structural engineering can further enhance unconventional superconductivity, and the charge-transfer property plays a crucial role in the pairing strength.

cond-mat.supr-con↗

arXiv2022

An Improved Frequent Directions Algorithm for Low-Rank Approximation via Block Krylov Iteration

Frequent Directions, as a deterministic matrix sketching technique, has been proposed for tackling low-rank approximation problems. This method has a high degree of accuracy and practicality, but experiences a lot of computational cost for large-scale data. Several recent works on the randomized version of Frequent Directions greatly improve the computational efficiency, but unfortunately sacrifice some precision. To remedy such issue, this paper aims to find a more accurate projection subspace to further improve the efficiency and effectiveness of the existing Frequent Directions techniques. Specifically, by utilizing the power of Block Krylov Iteration and random projection technique, this paper presents a fast and accurate Frequent Directions algorithm named as r-BKIFD. The rigorous theoretical analysis shows that the proposed r-BKIFD has a comparable error bound with original Frequent Directions, and the approximation error can be arbitrarily small when the number of iterations is chosen appropriately. Extensive experimental results on both synthetic and real data further demonstrate the superiority of r-BKIFD over several popular Frequent Directions algorithms, both in terms of computational efficiency and accuracy.

cs.LG↗

arXiv2022

Topmetal-M: a novel pixel sensor for compact tracking applications

The Topmetal-M is a large area pixel sensor (18 mm * 23 mm) prototype fabricated in a new 130 nm high-resistivity CMOS process in 2019. It contains 400 rows * 512 columns square pixels with the pitch of 40 μm. In Topmetal-M, a novel charge collection method combing the Monolithic Active Pixel Sensor (MAPS) and the Topmetal sensor has been proposed for the first time. Both the ionized charge deposited by the particle in the sensor and along the track over the sensor can be collected. The in-pixel circuit mainly consists of a low-noise charge sensitive amplifier to establish the signal for the energy reconstruction, and a discriminator with a Time-to-Amplitude Converter (TAC) for the Time of Arrival (TOA) measurement. With this mechanism, the trajectory, particle hit position, energy and arrival time of the particle can be measured. The analog signal from each pixel is accessible through time-shared multiplexing over the entire pixel array. This paper will discuss the design and preliminary test results of the Topmetal-M sensor.

physics.ins-det↗

arXiv2022

Effective Tensor Completion via Element-wise Weighted Low-rank Tensor Train with Overlapping Ket Augmentation

In recent years, there have been an increasing number of applications of tensor completion based on the tensor train (TT) format because of its efficiency and effectiveness in dealing with higher-order tensor data. However, existing tensor completion methods using TT decomposition have two obvious drawbacks. One is that they only consider mode weights according to the degree of mode balance, even though some elements are recovered better in an unbalanced mode. The other is that serious blocking artifacts appear when the missing element rate is relatively large. To remedy such two issues, in this work, we propose a novel tensor completion approach via the element-wise weighted technique. Accordingly, a novel formulation for tensor completion and an effective optimization algorithm, called as tensor completion by parallel weighted matrix factorization via tensor train (TWMac-TT), is proposed. In addition, we specifically consider the recovery quality of edge elements from adjacent blocks. Different from traditional reshaping and ket augmentation, we utilize a new tensor augmentation technique called overlapping ket augmentation, which can further avoid blocking artifacts. We then conduct extensive performance evaluations on synthetic data and several real image data sets. Our experimental results demonstrate that the proposed algorithm TWMac-TT outperforms several other competing tensor completion methods.

cs.CV↗

arXiv2021

Dispersionless orbital excitations in (Li,Fe)OHFeSe superconductors

The superconducting critical temperature $T_{\mathrm{c}}$ of intercalated iron-selenide superconductor (Li,Fe)OHFeSe (FeSe11111) can be increased to 42 K from 8 K of bulk FeSe. It shows remarkably similar electronic properties as the high-$T_{\mathrm{c}}$ monolayer FeSe and provides a bulk counterpart to investigate the origin of enhanced superconductivity. Unraveling the nature of excitations is crucial for understanding the pairing mechanism in high-$T_{\mathrm{c}}$ iron selenides. Here we use resonant inelastic x-ray scattering (RIXS) to investigate the excitations in FeSe11111. Our high-quality data exhibit several Raman-like excitations, which are dispersionless and isotropic in momentum transfer and robust against varying $T_{\mathrm{c}}$. Using atomic multiplet calculations, we assign the low-energy $\sim 0.3$ and 0.7 eV Raman peaks as local $e_g-e_g$ and $e_g-t_{2g}$ orbital excitations. The intensity of these two features decreases with increasing temperature, suggesting a primary contribution of the orbital fluctuations. Our results highlight the importance of orbital degree of freedom for high-$T_{\mathrm{c}}$ iron selenides.

cond-mat.supr-con↗

arXiv2021

Orbitally Selective Resonant Photodoping to Enhance Superconductivity

Signatures of superconductivity at elevated temperatures above $T_c$ in high temperature superconductors have been observed near 1/8 hole doping for photoexcitation with infrared or optical light polarized either in the CuO$_2$-plane or along the $c$-axis. While the use of in-plane polarization has been effective for incident energies aligned to specific phonons, $c$-axis laser excitation in a broad range between 5 $μ$m and 400 nm was found to affect the superconducting dynamics in striped La$_{1.885}$Ba$_{0.115}$CuO$_4$, with a maximum enhancement in the $1/ω$ dependence to the conductivity observed at 800 nm. This broad energy range, and specifically 800 nm, is not resonant with any phonon modes, yet induced electronic excitations appear to be connected to superconductivity at energy scales well above the typical gap energies in the cuprates. A critical question is what can be responsible for such an effect at 800 nm? Using time-dependent exact diagonalization, we demonstrate that the holes in the CuO$_2$ plane can be photoexcited into the charge reservoir layers at resonant wavelengths within a multi-band Hubbard model. This orbitally selective photoinduced charge transfer effectively changes the in-plane doping level, which can lead to an enhancement of $T_c$ near the 1/8 anomaly.

cond-mat.supr-con↗

arXiv2021

Nonequilibrium system-bath entanglement theorem versus heat transport

In this work, we extend the recently established system-bath entanglement theorem (SBET) [J. Chem. Phys. 152, 034102 (2020)] to the nonequilibrium scenario, in which an arbitrary system couples to multiple Gaussian baths environments at different temperatures. While the existing SBET connects the entangled system-bath response functions to those of local systems, the extended theory is concerned with the nonequilibrium steady-state quantum transport current through molecular junctions. The new theory is established on the basis of the generalized Langevin equation, with a close relation to nonequilibrium thermodynamics in the quantum regime.

quant-ph↗

arXiv2021

Temperature-dependence of the subdivision potential in nanothermodynamics

Nanothermodynamics is the thermodynamics of small systems, which are signifcantly affected by their surrounding environments. In nanothermodynamics, Hill introduced the concept of subdivision potential, which charaterizes the non-extensiveness. In this work, we establish the quantum thermodynamic integration of the subdivision potential, which is identifed to be proportional to the difference between the thermal and von Neumann entropies, focusing on its temperature-dependence. As a result, it serves as a versatile tool to help analyze the origin of non-extensiveness in nanosystems.

cond-mat.stat-mech↗

arXiv2021

Domain Adaptation of Networks for Camera Pose Estimation: Learning Camera Pose Estimation Without Pose Labels

One of the key criticisms of deep learning is that large amounts of expensive and difficult-to-acquire training data are required in order to train models with high performance and good generalization capabilities. Focusing on the task of monocular camera pose estimation via scene coordinate regression (SCR), we describe a novel method, Domain Adaptation of Networks for Camera pose Estimation (DANCE), which enables the training of models without access to any labels on the target task. DANCE requires unlabeled images (without known poses, ordering, or scene coordinate labels) and a 3D representation of the space (e.g., a scanned point cloud), both of which can be captured with minimal effort using off-the-shelf commodity hardware. DANCE renders labeled synthetic images from the 3D model, and bridges the inevitable domain gap between synthetic and real images by applying unsupervised image-level domain adaptation techniques (unpaired image-to-image translation). When tested on real images, the SCR model trained with DANCE achieved comparable performance to its fully supervised counterpart (in both cases using PnP-RANSAC for final pose estimation) at a fraction of the cost. Our code and dataset are available at https://github.com/JackLangerman/dance

cs.CV↗