arXiv subjects
Publications and source records attributed to Yaojun Qiao.
We propose a pre-compensation scheme for bandwidth limitation and fiber dispersion (pre-BL-EDC) based on the modified Gerchberg-Saxton (GS) algorithm. Experimental results demonstrate 1.0/1.0/2.0 dB gains compared to modified GS pre-EDC for 20/28/32 Gbit/s bandwidth-limited systems.
Utilizing the precise reference waveform regenerated by post-forward error correction (FEC) data, the fiber-longitudinal power profile estimation based on the minimum-mean-square-error method (MMSE-PPE) has been validated as an effective tool for absolute power monitoring. However, when post-FEC data is unavailable, it becomes necessary to rely on pre-FEC hard-decision data, which inevitably introduces hard-decision errors. These hard-decision errors will result in a power offset that undermines the accuracy of absolute power monitoring. In this paper, we present the first analytical expression for power offset in MMSE-PPE when using pre-FEC hard-decision data, achieved by introducing a virtual hard-decision nonlinear perturbation term. Based on this analytical expression, we also establish the first nonlinear relationship between the power offset and the symbol error rate (SER) of M-ary quadrature amplitude modulation (M-QAM) formats based on Gaussian assumptions. Verified in a numerical 130-GBaud single-wavelength coherent optical fiber transmission system, the correctness of the analytical expression of power offset has been confirmed with 4-QAM, 16-QAM, and 64-QAM formats under different SER situations. Furthermore, the nonlinear relationship between the power offset and SER of $M$-QAM formats has also been thoroughly validated under both linear scale (measured in mW) and logarithmic scale (measured in dB). These theoretical insights offer significant contributions to the design of potential power offset mitigation strategies in MMSE-PPE, thereby enhancing its real-time application.
A high-performance S-band single-longitudinal-mode (SLM) erbium-doped fiber (EDF) ring cavity laser based on a depressed cladding EDF is investigated and experimentally demonstrated. We combine a double-ring passive resonator (DR-PR) and a length of unpumped polarization maintaining (PM) EDF in the laser cavity to achieve the SLM lasing without mode hopping. The DR-PR, composed of two efficient dual-coupler fiber rings, is utilized to expand the free spectral range of the EDF ring cavity laser and to eliminate the dense longitudinal modes greatly. The PM EDF, insusceptible to random change induced by environmental perturbations, is used as a saturable absorber filter to guarantee and to stabilize the SLM operation of the EDF ring cavity laser. At the pump power of 400 mW, we obtain an SLM EDF ring laser with a linewidth as narrow as 568 Hz, an optical signal-to-noise ratio as high as 77 dB, and a relative intensity noise as low as 140 dB/Hz at the frequency over 5 MHz. Meanwhile, the stability performance of both the wavelength lasing and the output power, the dependence of the OSNR and the output power on pump power for the S-band fiber laser are also investigated in detail.
An all-polarization maintaining (PM) single-longitudinal-mode (SLM) erbium-doped fiber laser (EDFL) with ultra-high optical signal-to-noise ratio (OSNR), ultra-narrow linewidth and extremely high stability is proposed and experimentally demonstrated. A double-ring passive subring resonator (DR-PSR) composed of two single-coupler fiber rings and a length of unpumped EDF-based saturable absorber filter is designed and employed in the EDFL to serve as the efficient SLM selecting element to guarantee SLM lasing with excellent output performance. The all-PM structure enables the proposed EDFL to present strong ability to resist the environment disturbance. At the pump power of 100 mW, we obtain an SLM EDFL with an ultra-high OSNR of 83 dB and an ultra-narrow linewidth of 459 Hz. For the SLM operation, the all-PM EDFL processes outstanding stability performance of both the wavelength lasing and the output power. The maximum fluctuations of the center wavelength and output power are 0.012 nm and 0.01 dB.
In this paper, an optimized detection based on log-maximum a posteriori estimation with the fixed number of surviving states (fixed-state Log-MAP) is proposed to cooperate with equalizers to deal with the spectral distortions caused by limited bandwidth and chromatic dispersion for intensity-modulation and direct-detection (IM/DD) optical systems. The equalizers compensates the spectral distortions and optimized detection decodes the useful bits from the noise. For accurately extracting the bits from more serious noise, the optimized detection with larger memory length is required. However, the classical optimized detection such as maximum likelihood-sequence estimation (MLSE) requires exponential-growing computational complexity and storage with the increasing memory length. The fixed-state Log-MAP detection can decrease the computational complexity and storage from the exponential order to linear order. Therefore, the fixed-state Log-MAP detection can compensate more distortions compared to MLSE under the same hardware condition. We experimentally verify the fixed-state Log-MAP detection in a C-band 64 Gbit/s IM/DD on-off keying optical system over a 100 km dispersion-uncompensated link. Under the same hardware condition, the fixed-state Log-MAP detection has a 2 dB improvement of receiver sensitivity compared to MLSE. In conclusion, the fixed-state Log-MAP detection shows the potential for practical IM/DD optical systems.
Probabilistic shaping (PS) is investigated as a potential technique to approach the Shannon limit. However, it has been proved that conventional carrier phase recovery (CPR) algorithm designed for uniform distribution may have extra penalty in PS systems. In this paper, we find that the performance of QPSK partition algorithm is degenerated when PS is implemented. To solve this issue, a modified QPSK partition algorithm that jointly optimizes the amplitude decision threshold and filter weight is proposed, where the optimization of decision threshold is based on maximum a posterior probability (MAP) estimation. Different from the conventional decision methods which commonly use Euclidean distance metric, the MAP-based decision introduces the statistical characteristics of the received signals to obtain an accurate amplitude partition. In addition, the filter weight is optimized for different decision thresholds to enhance the tolerance of ASE-induced phase noise. We verify the feasibility of the proposed algorithm in a 56 GBaud PS 16-ary quadrature amplitude modulation (16-QAM) system. The proposed algorithm reduces the error of phase noise estimation by nearly half. Compared with conventional QPSK partition, the proposed algorithm could narrow the gap with theoretical mutual information (MI) by more than 0.1 bit/symbol. The channel capacity is increased by 4.2%, 4.3% and 3.6% with signal-to-noise ratio (SNR) from 8 dB to 10 dB respectively. These observations show that the proposed algorithm is a promising method to relieve the penalty of QPSK partition algorithm in PS systems.
In 1975, the pioneering work of J. E. Mazo showed the potential faster-than-Nyquist (FTN) gain of single-carrier binary signal. If the inter-symbol interference is eliminated by an optimal detector, the FTN single-carrier binary signal can transmit 24.7% more bits than the Nyquist signal without any loss of bit error rate performance, which is known as the Mazo limit. In this paper, we apply sphere decoder (SD) with box optimization (BO) to reduce inter-carrier interference (ICI) in FTN non-orthogonal frequency division multiplexing (FTN-NOFDM) system. Compared with the conventional SD, SD with BO can achieve the same performance to reduce ICI, but its average number of expanded nodes in search process is significantly decreased especially for high-order modulation format, which can reduce the complexity of the receiver. When the bandwidth compression factor $α$ is set to 0.802, the transmission rate of QPSK-modulated FTN-NOFDM is 24.7% faster than the Nyquist rate, and it has almost the same performance as orthogonal frequency division multiplexing (OFDM), which agrees well with the Mazo limit. The QPSK-modulated FTN-NOFDM with $α$ equal to 0.5 (the spectral efficiency is 4 bit/s/Hz) outperforms 16QAM-modulated OFDM by about 1.5 dB. The 16QAM-modulated FTN-NOFDM with $α$ equal to 0.67 and 0.5 (the spectral efficiency is 6 bit/s/Hz and 8 bit/s/Hz, respectively) outperforms 64QAM-modulated and 256QAM-modulated OFDM by about 1.5 dB and 2 dB, respectively. Therefore, FTN-NOFDM will be a promising modulation scheme for the future bandwidth-limited wireless communications.
In this paper, an improved receiver based on diversity combining is proposed to improve the bit error rate (BER) performance of layered asymmetrically clipped optical fast orthogonal frequency division multiplexing (ACO-FOFDM) for intensity-modulated and direct-detected (IM/DD) optical transmission systems. Layered ACO-FOFDM can compensate the weakness of traditional ACO-FOFDM in low spectral efficiency, the utilization of discrete cosine transform in FOFDM system instead of fast Fourier transform in OFDM system can reduce the computational complexity without any influence on BER performance. The BER performances of layered ACO-FOFDM system with improved receiver based on diversity combining and DC-offset FOFDM (DCO-FOFDM) system with optimal DC-bias are compared at the same spectral efficiency. Simulation results show that under different optical bit energy to noise power ratios, layered ACO-FOFDM system with improved receiver has 2.86dB, 5.26dB and 5.72dB BER performance advantages at forward error correction limit over DCO-FOFDM system when the spectral efficiencies are 1 bit/s/Hz, 2 bits/s/Hz and 3 bits/s/Hz, respectively. Layered ACO-FOFDM system with improved receiver based on diversity combining is suitable for application in the adaptive IM/DD systems with zero DC-bias.
In this paper, we propose a faster-than-Nyquist (FTN) non-orthogonal frequency-division multiplexing (NOFDM) scheme for visible light communications (VLC) where the multiplexing/demultiplexing employs the inverse fractional cosine transform (IFrCT)/FrCT. Different to the common fractional Fourier transform-based NOFDM (FrFT-NOFDM) signal, FrCT-based NOFDM (FrCT-NOFDM) signal is real-valued which can be directly applied to the VLC systems without the expensive upconversion. Thus, FrCT-NOFDM is more suitable for the cost-sensitive VLC systems. Meanwhile, under the same transmission rate, FrCT-NOFDM signal occupies smaller bandwidth compared to OFDM signal. When the bandwidth compression factor $α$ is set to $0.8$, $20\%$ bandwidth saving can be obtained. Therefore, FrCT-NOFDM has higher spectral efficiency and suffers less high-frequency distortion compared to OFDM, which benefits the bandwidth-limited VLC systems. As the simulation results show, bit error rate (BER) performance of FrCT-NOFDM with $α$ of $0.9$ or $0.8$ is better than that of OFDM. Moreover, FrCT-NOFDM has a superior security performance. In conclusion, FrCT-NOFDM shows great potential for application in the future VLC systems.
Faster-than-Nyquist (FTN) signal achieves higher spectral efficiency and capacity compared to Nyquist signal due to its smaller pulse interval or narrower subcarrier spacing. Shannon limit typically defines the upper-limit capacity of Nyquist signal. To the best of our knowledge, the mathematical expression for the capacity limit of FTN non-orthogonal frequency-division multiplexing (NOFDM) signal is first demonstrated in this paper. The mathematical expression shows that FTN NOFDM signal has the potential to achieve a higher capacity limit compared to Nyquist signal. In this paper, we demonstrate the principle of FTN NOFDM by taking fractional cosine transform-based NOFDM (FrCT-NOFDM) for instance. FrCT-NOFDM is first proposed and implemented by both simulation and experiment. When the bandwidth compression factor $α$ is set to $0.8$ in FrCT-NOFDM, the subcarrier spacing is equal to $40\%$ of the symbol rate per subcarrier, thus the transmission rate is about $25\%$ faster than Nyquist rate. FTN NOFDM with higher capacity would be promising in the future communication systems, especially in the bandwidth-limited applications.