SearcharxivSearch

arXiv subjects

Yaowen Hu

Publications and source records attributed to Yaowen Hu.

At least 19 recordsLinked to original sources

ReCrit: Transition-Aware Reinforcement Learning for Scientific Critic Reasoning

Large language models can fail in critic interaction not only by answering incorrectly, but also by abandoning an initially correct scientific solution after user criticism. This is especially risky in scientific reasoning, where user criticism can turn a valid answer into an incorrect one. We frame critic interaction as an inter-turn correctness-transition problem rather than a final-answer accuracy problem, and identify three challenges: transition awareness, decoupling useful correction from harmful sycophancy, and scalable rollout. We propose ReCrit, a transition-aware reinforcement learning framework that decomposes Initial-to-Critic behavior into four quadrants: Correction, Sycophancy, Robustness, and Boundary. ReCrit rewards correction and robustness, penalizes sycophancy, and treats persistent errors as weak boundary signals. To make interaction training practical, ReCrit further uses dynamic asynchronous rollout with tail-adaptive completion to reduce rollout waiting. On three scientific reasoning benchmarks, ChemBench, TRQA, and EarthSE, ReCrit improves average Critic accuracy from 38.15 to 51.49 on Qwen3.5-4B and from 45.40 to 55.59 on Qwen3.5-9B. Ablations show that final-answer rewards provide little interaction-level gain, while transition-aware rewards and quadrant weighting produce more distinguishable training signals and larger net Critic-stage improvement. The code is available at https://github.com/black-yt/ReCrit .

cs.LG

Communication-ready high-power soliton microcombs in highly-dispersive Fabry-Perot-microresonators

Microcombs generated in optical microresonators are widely regarded as promising light sources for next-generation communication systems, but the optical power available per comb line has so far fallen short of practical requirements. Here we introduce an integrated Fabry-P\'erot microresonator platform that overcomes fundamental dispersion-engineering constraints and enables bright soliton microcombs with unprecedented power per line. The resonator is defined by chirped Bragg gratings that provide exceptionally large anomalous group-velocity dispersion, allowing more than ten comb lines to reach the milliwatt level. These combs can be used directly in coherent communication systems without additional amplification, achieving an aggregate data rate of 2 Tb/s. Once integrated, our high-power soliton microcombs could be instantly ready for communications as well as a broad range of practical comb-based applications.

physics.optics

A universal framework for nonlinear frequency combs under electro-optic modulation

Nonlinear frequency combs, including electro-optic and Kerr combs, have become central platforms for chip-scale frequency synthesis. Recent breakthroughs in strong-coupling electro-optic modulation further expanded their accessible nonlinear dynamics, unlocking new phenomena and functionalities, but the underlying foundation remains largely unexplored. Here we establish a universal theoretical and experimental framework for nonlinear combs under arbitrary electro-optic modulation by introducing a general evolution equation (GEE) that transcends the mean-field Lugiato-Lefever equation. The GEE reduces to a discrete-time Integration Hamiltonian that provides a frequency-domain formalism unifying strong-coupling electro-optic modulation with photonic synthetic dimensions. Together with a band-wave correspondence linking modulation waveforms to synthetic band structures, the formalism enables programmable spectral control. We further show compatibility between Kerr nonlinearity and strong-coupling electro-optic modulation, highlighting their cooperative dynamics. Our work provides a foundational model for strong-coupling electro-optics in nonlinear combs, opening a route toward chip-integrated, microwave-programmable comb sources for metrology, spectroscopy, and emerging photonic technologies.

physics.optics

Spectral-temporal processing using integrated recursive electro-optic circuit

Advances in integrated photonics have enabled unprecedented level of control of light, powering a wide range of photonic technologies from communications and computing to precision metrology and quantum information. However, the conventional on-chip optical signal processing approaches based on optical waveguides and cavities suffer from their large physical footprint and narrow operating bandwidth, respectively. To address this, we propose and experimentally demonstrate, using the thin film lithium niobate (TFLN) photonics, a modular, recursive optical signal processing framework. In our approach, fast electro-optic (EO) switch is used to either keep an optical packet inside the loop, with the processing element embedded within, or to release it from the loop and direct it towards the output waveguide. By configuring the switch on a timescale shorter than a time the photon spends traversing the loop, this architecture can achieve different optical pathlengths in a compact footprint without sacrificing optical bandwidth. As an example, we embed a phase-modulator (PM) inside the loop and demonstrate a frequency shift of optical packets up to 420 GHz, using only a 3 GHz sinusoidal microwave signal. By replacing the PM with chirped Bragg gratings (CBG), we demonstrate recursive delay line featuring large group delays of 28 ps/nm over a 30 nm optical bandwidth. Finally, by introducing asymmetric Mach-Zehnder interferometer (AMZI) inside the loop, we demonstrate a reconfigurable differentiation of the optical packet in time, up to an unprecedented fifth-order. Our results establish a powerful and scalable platform for multifunctional photonic processing, setting the stage for next-generation integrated systems with ultrahigh reconfigurability and spectral-temporal versatility.

physics.optics

Universal dynamics and microwave control of programmable cavity electro-optic frequency combs

Electro-optic (EO) frequency combs are foundational for metrology and spectroscopy. Specifically, microresonator-based cavity EO combs are distinguished by efficient sideband generation, precisely controlled by microwave signals, enabling high-performance integrated frequency references and pulse sources. However, the apparent simplicity of these devices, often described by the EO modulation-induced coupling of nearest-neighbor cavity modes, has limited investigations of their fundamental physics, thereby restricting their full potential. Here, we uncover the universal dynamics and complete frequency lattice connectivity underpinning cavity EO microcombs, as well as characterize the full space of nonlinear optical states, controlled by modulation depth and optical detuning, using the thin-film lithium niobate photonic platform. Leveraging this understanding, we design complex long-range couplings between cavity modes to realize programmable spectro-temporal shaping of the generated combs and pulses. We achieve three technological advances, including repetition-rate flexibility, substantial comb bandwidth extension beyond traditional scaling laws, and resonantly-enhanced flat-top spectrum. Our results provide physical insights for synchronously driven cavity-based EO systems, broadly defined, paving the way for electrically controlled and electrically enhanced comb generators for next-generation photonic applications.

physics.optics

Strong-coupling and high-bandwidth cavity electro-optic modulation for advanced pulse-comb synthesis

Cavity electro-optic (EO) modulation plays a pivotal role in optical pulse and frequency comb synthesis, supporting a wide range of applications including communication, computing, ranging, and quantum information. The ever-growing demand for these applications has driven efforts in enhancing modulation coupling strength and bandwidth towards advanced pulse-comb synthesis. However, the effects of strong-coupling and high-bandwidth cavity EO modulation remain underexplored, due to the lack of a general, unified model that captures this extreme condition. In this work, we present a universal framework for pulse-comb synthesis under cavity EO modulation, where coupling strength and modulation bandwidth far exceed the cavity's free spectral range (FSR). We show that, under such intense and ultrafast driving conditions, EO-driven frequency combs and pulses exhibit rich higher-order nonlinear dynamics, including temporal pulse compression and comb generation with arbitrary pump detuning. Leveraging this framework, we reveal a direct link between the higher-order dynamics of EO pulse-comb generation and the band structure of synthetic dimension. Furthermore, we demonstrate arbitrary comb shaping via machine-learning-based inverse microwave drive design, achieving a tenfold enhancement in cavity electro-optic comb flatness by exploring the synergistic effects of high-bandwidth driving and detuning-induced frequency boundaries. Our findings push cavity electro-optic modulation into a new frontier, unlocking significant potential for universal and machine-learning-programmable electro-optic frequency combs, topological photonics, as well as photonic quantum computing in the strong-coupling and high-bandwidth regimes.

physics.optics

Divide-Then-Rule: A Cluster-Driven Hierarchical Interpolator for Attribute-Missing Graphs

Deep graph clustering (DGC) for attribute-missing graphs is an unsupervised task aimed at partitioning nodes with incomplete attributes into distinct clusters. Addressing this challenging issue is vital for practical applications. However, research in this area remains underexplored. Existing imputation methods for attribute-missing graphs often fail to account for the varying amounts of information available across node neighborhoods, leading to unreliable results, especially for nodes with insufficient known neighborhood. To address this issue, we propose a novel method named Divide-Then-Rule Graph Completion (DTRGC). This method first addresses nodes with sufficient known neighborhood information and treats the imputed results as new knowledge to iteratively impute more challenging nodes, while leveraging clustering information to correct imputation errors. Specifically, Dynamic Cluster-Aware Feature Propagation (DCFP) initializes missing node attributes by adjusting propagation weights based on the clustering structure. Subsequently, Hierarchical Neighborhood-aware Imputation (HNAI) categorizes attribute-missing nodes into three groups based on the completeness of their neighborhood attributes. The imputation is performed hierarchically, prioritizing the groups with nodes that have the most available neighborhood information. The cluster structure is then used to refine the imputation and correct potential errors. Finally, Hop-wise Representation Enhancement (HRE) integrates information across multiple hops, thereby enriching the expressiveness of node representations. Experimental results on six widely used graph datasets show that DTRGC significantly improves the clustering performance of various DGC methods under attribute-missing graphs.

cs.LG

Scalable Attribute-Missing Graph Clustering via Neighborhood Differentiation

Deep graph clustering (DGC), which aims to unsupervisedly separate the nodes in an attribute graph into different clusters, has seen substantial potential in various industrial scenarios like community detection and recommendation. However, the real-world attribute graphs, e.g., social networks interactions, are usually large-scale and attribute-missing. To solve these two problems, we propose a novel DGC method termed \underline{\textbf{C}}omplementary \underline{\textbf{M}}ulti-\underline{\textbf{V}}iew \underline{\textbf{N}}eighborhood \underline{\textbf{D}}ifferentiation (\textit{CMV-ND}), which preprocesses graph structural information into multiple views in a complete but non-redundant manner. First, to ensure completeness of the structural information, we propose a recursive neighborhood search that recursively explores the local structure of the graph by completely expanding node neighborhoods across different hop distances. Second, to eliminate the redundancy between neighborhoods at different hops, we introduce a neighborhood differential strategy that ensures no overlapping nodes between the differential hop representations. Then, we construct $K+1$ complementary views from the $K$ differential hop representations and the features of the target node. Last, we apply existing multi-view clustering or DGC methods to the views. Experimental results on six widely used graph datasets demonstrate that CMV-ND significantly improves the performance of various methods.

cs.SI

Toward ultimate-efficiency frequency conversion in nonlinear optical microresonators

Integrated nonlinear photonics has emerged as a transformative platform, enabling nanoscale nonlinear optical processes with significant implications for sensing, computation, and metrology. Achieving efficient nonlinear frequency conversion in optical microresonators is paramount to fully unlocking this potential, yet the absolute conversion efficiency (ACE) of many processes, such as second-harmonic generation (SHG), remains fundamentally constrained by dissipative losses and intrinsic nonlinear effects in the device. In this work, we establish a unified theoretical framework for SHG in microresonators, identifying a decisive factor M that predicts the upper limit of ACE under the nonlinear critical coupling (NCC) condition. Using this framework, we fabricate integrated periodically poled lithium niobate microresonators and address the dispersive and dissipative suppression to approach the NCC condition. We achieve a record-high experimental ACE of 61.3% with milliwatt-level pump powers toward the ultimate efficiency, with the potential for even higher efficiency as the M factor increases. These results provide a versatile paradigm for high-efficiency nonlinear optical devices, offering new opportunities for advancements across classical and quantum photonic applications.

physics.optics

Integrated electro-optic digital-to-analog link for efficient computing and arbitrary waveform generation

The rapid growth in artificial intelligence and modern communication systems demands innovative solutions for increased computational power and advanced signaling capabilities. Integrated photonics, leveraging the analog nature of electromagnetic waves at the chip scale, offers a promising complement to approaches based on digital electronics. To fully unlock their potential as analog processors, establishing a common technological base between conventional digital electronic systems and analog photonics is imperative to building next-generation computing and communications hardware. However, the absence of an efficient interface has critically challenged comprehensive demonstrations of analog advantage thus far, with the scalability, speed, and energy consumption as primary bottlenecks. Here, we address this challenge and demonstrate a general electro-optic digital-to-analog link (EO-DiAL) enabled by foundry-based lithium niobate nanophotonics. Using purely digital inputs, we achieve on-demand generation of (i) optical and (ii) electronic waveforms at information rates up to 186 Gbit/s. The former addresses the digital-to-analog electro-optic conversion challenge in photonic computing, showcasing high-fidelity MNIST encoding while consuming 0.058 pJ/bit. The latter enables a pulse-shaping-free microwave arbitrary waveform generation method with ultrabroadband tunable delay and gain. Our results pave the way for efficient and compact digital-to-analog conversion paradigms enabled by integrated photonics and underscore the transformative impact analog photonic hardware may have on various applications, such as computing, optical interconnects, and high-speed ranging.

physics.optics

Integrated lithium niobate photonic computing circuit based on efficient and high-speed electro-optic conversion

Here we show a photonic computing accelerator utilizing a system-level thin-film lithium niobate circuit which overcomes this limitation. Leveraging the strong electro-optic (Pockels) effect and the scalability of this platform, we demonstrate photonic computation at speeds up to 1.36 TOPS while consuming 0.057 pJ/OP. Our system features more than 100 thin-film lithium niobate high-performance components working synergistically, surpassing state-of-the-art systems on this platform. We further demonstrate binary-classification, handwritten-digit classification, and image classification with remarkable accuracy, showcasing our system's capability of executing real algorithms. Finally, we investigate the opportunities offered by combining our system with a hybrid-integrated distributed feedback laser source and a heterogeneous-integrated modified uni-traveling carrier photodiode. Our results illustrate the promise of thin-film lithium niobate as a computational platform, addressing current bottlenecks in both electronic and photonic computation. Its unique properties of high-performance electro-optic weight encoding and conversion, wafer-scale scalability, and compatibility with integrated lasers and detectors, position thin-film lithium niobate photonics as a valuable complement to silicon photonics, with extensions to applications in ultrafast and power-efficient signal processing and ranging.

physics.optics

In-situ optical vector analysis based on integrated lithium niobate single-sideband modulators

Optical vector analysis (OVA) is an enabling technology for comprehensively characterizing both amplitude and phase responses of optical devices or systems. Conventional OVA technologies are mostly based on discrete optoelectronic components, leading to unsatisfactory system sizes, complexity, and stability. They also encounter challenges in revealing the on-chip characteristics of integrated photonic devices, which are often overwhelmed by the substantial coupling loss and extra spectral response at chip facets. In this work, we demonstrate a miniaturized OVA system for integrated photonics devices based on broadband single sideband (SSB) modulators on a thin-film lithium niobate (LN) platform. The OVA could provide a direct probe of both amplitude and phase responses of photonic devices with kHz-level resolution and tens of terahertz measurement bandwidth. We perform in-situ characterizations of single and coupled microring resonators fabricated on the same chip as the OVA, unfolding their intrinsic loss and coupling states unambiguously. Furthermore, we achieve the direct measurement of collective phase dynamics and density of states of the Bloch modes in a synthetic frequency crystal, by in-situ OVA of a dynamically modulated microring resonator. Our in-situ OVA system provides a compact, high-precision, and broadband solution for characterizing future integrated photonic devices and circuits, with potential applications ranging from optical communications, biosensing, neuromorphic computing, to quantum information processing.

physics.optics

Frequency comb generation via synchronous pumped $χ^{(3)}$ resonator on thin-film lithium niobate

Resonator-based optical frequency comb generation is an enabling technology for a myriad of applications ranging from communications to precision spectroscopy. These frequency combs can be generated in nonlinear resonators driven using either continuous-wave (CW) light, which requires alignment of the pump frequency with the cavity resonance, or pulsed light, which also mandates that the pulse repetition rate and cavity free spectral range (FSR) are carefully matched. Advancements in nanophotonics have ignited interest in chip-scale optical frequency combs. However, realizing pulse-driven on-chip Kerr combs remains challenging, as microresonator cavities have limited tuning range in their FSR and resonance frequency. Here, we take steps to overcome this limitation and demonstrate broadband frequency comb generation using a $χ^{(3)}$ resonator synchronously pumped by a tunable femtosecond pulse generator with on-chip amplitude and phase modulators. Notably, employing pulsed pumping overcomes limitations in Kerr comb generation typically seen in crystalline resonators from stimulated Raman scattering.

physics.optics

Integrated electro-optics on thin-film lithium niobate

Electro-optics serves as the crucial bridge between electronics and photonics, unlocking a wide array of applications ranging from communications and computing to sensing and quantum information. Integrated electro-optics approaches in particular enable essential electronic high-speed control for photonics while offering substantial photonic parallelism for electronics. Recent strides in thin-film lithium niobate photonics have ushered revolutionary advancements in electro-optics. This technology not only offers the requisite strong electro-optic coupling but also boasts ultra-low optical loss and high microwave bandwidth. Further, its tight confinement and compatibility with nanofabrication allow for unprecedented reconfigurability and scalability, facilitating the creation of novel and intricate devices and systems that were once deemed nearly impossible in bulk systems. Building upon this platform, the field has witnessed the emergence of various groundbreaking electro-optic devices surpassing the current state of the art, and introducing functionalities that were previously non-existent. This technological leap forward provides a unique framework to explore various realms of physics as well, including photonic non-Hermitian synthetic dimensions, active topological physics, and quantum electro-optics. In this review, we present the fundamental principles of electro-optics, drawing connections between fundamental science and the forefront of technology. We discuss the accomplishments and future prospects of integrated electro-optics, enabled by thin-film lithium niobate platform.

physics.optics

Octave-spanning Kerr soliton frequency combs in dispersion- and dissipation-engineered lithium niobate microresonators

Dissipative Kerr solitons from optical microresonators, commonly referred to as soliton microcombs, have been developed for a broad range of applications, including precision measurement, optical frequency synthesis, and ultra-stable microwave and millimeter wave generation, all on a chip. An important goal for microcombs is self referencing, which requires octave-spanning bandwidths to detect and stabilize the comb carrier envelope offset frequency. Further, detection and locking of the comb spacings are often achieved using frequency division by electro-optic modulation. The thin-film lithium niobate photonic platform, with its low loss, strong second- and third-order nonlinearity, as well as large Pockels effect, is ideally suited for these tasks. However, octave-spanning soliton microcombs are challenging to demonstrate on this platform, largely complicated by strong Raman effects hindering reliable fabrication of soliton devices. Here, we demonstrate entirely connected and octave-spanning soliton microcombs on thin-film lithium niobate. With appropriate control over microresonator free spectral range and dissipation spectrum, we show that soliton-inhibiting Raman effects are suppressed, and soliton devices are fabricated with near-unity yield. Our work offers an unambiguous method for soliton generation on strongly Raman-active materials. Further, it anticipates monolithically integrated, self-referenced frequency standards in conjunction with established technologies, such as periodically poled waveguides and electro-optic modulators, on thin-film lithium niobate.

physics.optics

Twenty-nine million Intrinsic Q-factor Monolithic Microresonators on Thin Film Lithium Niobate

The recent emergence of thin-film lithium niobate (TFLN) has extended the landscape of integrated photonics. This has been enabled by the commercialization of TFLN wafers and advanced nanofabrication of TFLN such as high-quality dry etching. However, fabrication imperfections still limit the propagation loss to a few dB/m, restricting the impact of this platform. Here, we demonstrate TFLN microresonators with a record-high intrinsic quality (Q) factor of twenty-nine million, corresponding to an ultra-low propagation loss of 1.3 dB/m. We present spectral analysis and the statistical distribution of Q factors across different resonator geometries. Our work pushes the fabrication limits of TFLN photonics to achieve a Q factor within one order of magnitude of the material limit.

physics.optics

Hybrid Kerr-electro-optic frequency combs on thin-film lithium niobate

Optical frequency combs are indispensable links between the optical and microwave domains, enabling a wide range of applications including precision spectroscopy, ultrastable frequency generation, and timekeeping. Chip-scale integration miniaturizes bulk implementations onto photonic chips, offering highly compact, stable, and power-efficient frequency comb sources. State of the art integrated frequency comb sources are based on resonantly-enhanced Kerr effect and, more recently, on electro-optic effect. While the former can routinely reach octave-spanning bandwidths and the latter feature microwave-rate spacings, achieving both in the same material platform has been challenging. Here, we leverage both strong Kerr nonlinearity and efficient electro-optic phase modulation available in the ultralow-loss thin-film lithium niobate photonic platform, to demonstrate a hybrid Kerr-electro-optic frequency comb with stabilized spacing. In our approach, a dissipative Kerr soliton is first generated, and then electro-optic division is used to realize a frequency comb with 2,589 comb lines spaced by 29.308 GHz and spanning 75.9 THz (588 nm) end-to-end. Further, we demonstrate electronic stabilization and control of the soliton spacing, naturally facilitated by our approach. The broadband, microwave-rate comb in this work overcomes the spacing-span tradeoff that exists in all integrated frequency comb sources, and paves the way towards chip-scale solutions for complex tasks such as laser spectroscopy covering multiple bands, micro- and millimeter-wave generation, and massively parallel optical communications.

physics.optics

Sub-1 Volt and High-Bandwidth Visible to Near-Infrared Electro-Optic Modulators

Integrated electro-optic (EO) modulators are fundamental photonics components with utility in domains ranging from digital communications to quantum information processing. At telecommunication wavelengths, thin-film lithium niobate modulators exhibit state-of-the-art performance in voltage-length product ($V_π$L), optical loss, and EO bandwidth. However, applications in optical imaging, optogenetics, and quantum science generally require devices operating in the visible-to-near-infrared (VNIR) wavelength range. In this work, we realize VNIR amplitude and phase modulators featuring $V_π$L's of sub-1 V$\cdot\,$cm, low optical loss, and high bandwidth EO response. Our Mach-Zehnder modulators exhibit a $V_π$L as low as 0.55 V$\cdot\,$cm at 738 nm, and EO bandwidths in excess of 35 GHz. Furthermore, we highlight the new opportunities these high-performance modulators offer by demonstrating the first integrated EO frequency combs at VNIR wavelengths, with over 50 lines and tunable spacing, and the first frequency shifting of pulsed light beyond its intrinsic bandwidth (up to 7x Fourier limit) by an EO shearing method.

physics.optics