arXiv subjects

Yaozu Jiang

Publications and source records attributed to Yaozu Jiang.

3 recordsLinked to original sources

arXiv2026

A Telescope System for Charge and Position Measurement of High Energy Nuclei

A high-granularity telescope system with a large sensitive area and low material budget has been developed for high-energy heavy ion beam tests. The telescope consists of nine layers of silicon microstrip detectors (SSDs), whose performance was validated through a heavy ion beam test at the CERN SPS. A hybrid machine learning algorithm is proposed to address the challenges of nuclear charge measurement with SSDs. The system achieves a spatial resolution of $\mathcal{O}(1) \,$\SI{}{\micro\metre} and a charge resolution better than 0.16 charge units for nuclei from $Z = 1$ to $Z = 29$, with a sensitive area of $8 \times 8 \, \mathrm{cm}^2$. To the best of our knowledge, this represents the most precise charge and spatial resolution simultaneously achieved by a silicon telescope to date.

physics.ins-det↗

arXiv2026

Beam Test Characterization of Silicon Microstrip Detector Flight-Model Ladders for the AMS-02 Upgrade

The AMS-02 experiment plans to install a new silicon microstrip tracker layer (Layer-0) on top of the existing detector, increasing the cosmic-ray acceptance by a factor of 3. Layer-0 employs a design in which multiple silicon microstrip detectors (SSDs) are connected in series to form long detector ladders. We present a detailed performance study of the flight-model ladders using a 350~GeV mixed hadron beam at the CERN SPS. The study focuses on the following aspects: (i) the performance of ladders with different numbers of SSDs, for which the intrinsic spatial resolution at normal incidence varies from $9.5~μ\mathrm{m}$ to $11.4~μ\mathrm{m}$ for ladders composed of 8 to 12 SSDs; (ii) the response consistency for particles impacting on the \emph{Head} and \emph{Tail} regions of the ladder; and (iii) the dependence of the detector performance on the particle incidence angle.

physics.ins-det↗

arXiv2025

A Silicon Microstrip Detector for Power-Limited and Large Sensitive Area Applications

A silicon microstrip detector (SSD) has been developed to have state of the art spatial resolution and a large sensitive area under stringent power constraints. The design incorporates three floating strips with their bias resistors inserted between two aluminum readout strips. Beam test measurements with the single sensor confirmed that this configuration achieves a total detection efficiency of $99.8 \, \%$ and spatial resolution $7.6 \, \mathrm{μm}$ for MIPs. A double-$η$ algorithm was developed to optimize hit position reconstruction for this SSD. The design can be adapted for large area silicon detectors.

physics.ins-det↗