SearcharxivSearch

arXiv subjects

Yash Kulkarni

Publications and source records attributed to Yash Kulkarni.

At least 19 recordsLinked to original sources

Which Eviction Policy Should an LLM Cache Use? A Systematic Study Across Workloads, Capacities, and Encoders

Semantic caches reuse an LLM response when the incoming query embedding lies near a cached query, but proposed eviction policies have rarely been compared under one protocol. Using CLEVER, we evaluate FIFO, LRU, LFU, ARC, GDSF, a single-pass streaming adaptation of SISO, and a semantic-redundancy policy across three ordered, deduplicated query corpora, three cache capacities, and two encoders. No evaluated policy improves on LFU by more than 0.041 percentage points in any of the eighteen settings. Replacement is not irrelevant: FIFO and streaming SISO trail LFU by as much as 8.67 and 8.55 points, respectively, at tight capacity. We explain the missing upside with a conditional packing result. Under exact lookup and insert-on-miss, a newly inserted entry cannot have a resident neighbor within the hit radius, so a geometry-aware eviction rule receives little new redundancy signal. A separate audit exposes a larger problem with the evaluated operating point. At MiniLM's median nearest-neighbor threshold, only 2.1-3.9% of sampled LMSYS and QQP hits are judged answer-substitutable, reducing raw hit rates of 51-60% to quality-adjusted rates of 1.1-2.2%. The cross-encoder study further shows that thresholds do not transfer between embedding models. LFU is the strongest simple default in this protocol; deployment decisions should first establish answer validity and then test sub-point policy differences with exact search.

cs.DB

Attribution-Guided Masking for Robust Cross-Domain Sentiment Classification

While pre-trained Transformer models achieve high accuracy on in-domain sentiment classification, they frequently experience severe performance degradation when transferring to out-of-domain data. We hypothesize that this generalization gap is driven by reliance on domain-specific spurious tokens. After demonstrating that post-hoc-token-level attribution drift fails to predict this gap, we propose Attribution-Guided Masking (AGM), a training time intervention that dynamically detects and penalizes highly attributed spurious tokens during fine-tuning. AGM's core component is a gradient based attribution masking loss ($\mathcal{L}_{mask}$), which can optionally be combined with a counterfactual contrastive loss to enforce domain-invariant representations, all without requiring target-domain labels or human annotation. Evaluated in a strict zero-shot transfer setting across four diverse domains with eight random seeds, AGM achieves competitive generalization compared to five strong baselines on the hardest transfer (Sentiment140): $\Delta$ = 0.244 versus DANN (0.264), DRO (0.248), Fish (0.247), and IRM (0.238), while uniquely providing token-level interpretability into which features drive the generalization gap. Our qualitative analysis confirms that AGM suppresses attribution on domain-specific tokens such as @mentions, hashtags, and slang, shifting reliance toward domain-invariant sentiment markers. Our ablation study further confirms that attribution-guided masking is the critical component: removing it or replacing it with random token selection consistently degrades performance on difficult transfers.

cs.LG

The rapidly advancing contact line Part-1: Navier slip and microscale inertial effects

Curtain coating, in which a moving plate is coated by a falling liquid sheet, sustains advancing contact lines at large capillary numbers Ca ~ O(1), based on plate speed. Steady states exist up to a critical capillary number, beyond which wetting failure occurs through air-bubble entrainment. In the steady regime, experiments report that velocity along the fluid-fluid interface accelerates as the contact line is approached, down to tens of micrometres; this has been interpreted as evidence against the Navier slip model. We ask whether this acceleration is compatible with slip models, and show that it is. Although Navier slip implies a vanishing velocity at the contact line, the experimentally accessible microscale region lies outside the slip region. The curtain-coating setup is revealing because the local Reynolds number, based on distance from the contact line r ~ 10 microns, is order unity, so the observable flow is governed by local inertia. Our two-phase Navier-Stokes Volume-of-Fluid simulations with quadtree adaptive mesh refinement resolve the smallest scales and study the flow with a Navier slip boundary condition and fixed contact angle. The simulations reproduce the non-monotonic dependence of the critical capillary number on global Reynolds number, based on feed-flow velocity, and the variation of the macroscopic contact angle at the inflection point, in agreement with Liu et al (2016). The interfacial velocity in the microscale region is well described by an inertially corrected wedge flow solution whose wedge angle is set by the inflection-point value, with agreement improving as slip length is reduced; at larger scales, interface bending follows the Benney solution. These inertial effects, absent from pure Stokes flow, are essential in the experimental region. Thus qualitative microscale observations do not decisively invalidate slip models for advancing contact lines.

physics.flu-dyn

Scale- and Structure-Dependent Fractal Dimensions in a Two-Dimensional Atomizing Liquid Jet

Atomization stretches and folds the liquid-gas interface before fragmenting it into ligaments and droplets, making fractal measures a natural descriptor of the breakup state. We examine this idea in two-dimensional volume-of-fluid direct numerical simulations, VOF-DNS, of a liquid jet with adaptive mesh refinement in Basilisk. Box counting of the full resolved interface does not yield a single scale-independent exponent. Instead, two scaling ranges appear, separated by a crossover near box-counting level Lbox about 7: coarser boxes measure the folded connected jet envelope, whereas finer boxes increasingly sample ligaments, droplets, and nearly smooth local interface segments. Decomposing the interface into detached droplets, ligaments, and the connected main body shows that the relevant effective dimension is structure dependent. Droplets remain near Euclidean at fine scales, ligaments occupy an intermediate level, and the main body carries the largest coarse-scale dimension. This hierarchy persists for liquid Reynolds numbers from 100 to 10000 at fixed gas Weber number 200. Thus, in this two-dimensional VOF-DNS setting, fractal dimension is best interpreted not as a single global exponent, but as a scale- and structure-resolved state variable for interfacial folding and breakup.

physics.flu-dyn

A Single-Fiber Optical Frequency Domain Reflectometry (OFDR)-Based Shape Sensing of Concentric Tube Steerable Drilling Robots

This paper introduces a novel shape-sensing approach for Concentric Tube Steerable Drilling Robots (CT-SDRs) based on Optical Frequency Domain Reflectometry (OFDR). Unlike traditional FBG-based methods, OFDR enables continuous strain measurement along the entire fiber length with enhanced spatial resolution. In the proposed method, a Shape Sensing Assembly (SSA) is first fabricated by integrating a single OFDR fiber with a flat NiTi wire. The calibrated SSA is then routed through and housed within the internal channel of a flexible drilling instrument, which is guided by the pre-shaped NiTi tube of the CT-SDR. In this configuration, the drilling instrument serves as a protective sheath for the SSA during drilling, eliminating the need for integration or adhesion to the instrument surface that is typical of conventional optical sensor approaches. The performance of the proposed SSA, integrated within the cannulated CT-SDR, was thoroughly evaluated under free-bending conditions and during drilling along multiple J-shaped trajectories in synthetic Sawbones phantoms. Results demonstrate accurate and reliable shape-sensing capability, confirming the feasibility and robustness of this integration strategy.

cs.RO

Comparative Analysis of Autonomous Robotic and Manual Techniques for Ultrasonic Sacral Osteotomy: A Preliminary Study

In this paper, we introduce an autonomous Ultrasonic Sacral Osteotomy (USO) robotic system that integrates an ultrasonic osteotome with a seven-degree-of-freedom (DoF) robotic manipulator guided by an optical tracking system. To assess multi-directional control along both the surface trajectory and cutting depth of this system, we conducted quantitative comparisons between manual USO (MUSO) and robotic USO (RUSO) in Sawbones phantoms under identical osteotomy conditions. The RUSO system achieved sub-millimeter trajectory accuracy (0.11 mm RMSE), an order of magnitude improvement over MUSO (1.10 mm RMSE). Moreover, MUSO trials showed substantial over-penetration (16.0 mm achieved vs. 8.0 mm target), whereas the RUSO system maintained precise depth control (8.1 mm). These results demonstrate that robotic procedures can effectively overcome the critical limitations of manual osteotomy, establishing a foundation for safer and more precise sacral resections.

cs.RO

Multi-View Camera System for Variant-Aware Autonomous Vehicle Inspection and Defect Detection

Ensuring that every vehicle leaving a modern production line is built to the correct \emph{variant} specification and is free from visible defects is an increasingly complex challenge. We present the \textbf{Automated Vehicle Inspection (AVI)} platform, an end-to-end, \emph{multi-view} perception system that couples deep-learning detectors with a semantic rule engine to deliver \emph{variant-aware} quality control in real time. Eleven synchronized cameras capture a full 360{\deg} sweep of each vehicle; task-specific views are then routed to specialised modules: YOLOv8 for part detection, EfficientNet for ICE/EV classification, Gemini-1.5 Flash for mascot OCR, and YOLOv8-Seg for scratch-and-dent segmentation. A view-aware fusion layer standardises evidence, while a VIN-conditioned rule engine compares detected features against the expected manifest, producing an interpretable pass/fail report in \(\approx\! 300\,\text{ms}\). On a mixed data set of Original Equipment Manufacturer(OEM) vehicle data sets of four distinct models plus public scratch/dent images, AVI achieves \textbf{93\%} verification accuracy, \textbf{86 \%} defect-detection recall, and sustains \(\mathbf{3.3}\) vehicles/min, surpassing single-view or no segmentation baselines by large margins. To our knowledge, this is the first publicly reported system that unifies multi-camera feature validation with defect detection in a deployable automotive setting in industry.

cs.CV

Analytical Design and Development of a Modular and Intuitive Framework for Robotizing and Enhancing the Existing Endoscopic Procedures

Despite the widespread adoption of endoscopic devices for several cancer screening procedures, manual control of these devices still remains challenging for clinicians, leading to several critical issues such as increased workload, fatigue, and distractions. To address these issues, in this paper, we introduce the design and development of an intuitive, modular, and easily installable mechatronic framework. This framework includes (i) a novel nested collet-chuck gripping mechanism that can readily be integrated and assembled with the existing endoscopic devices and control their bending degrees-of-freedom (DoFs); (ii) a feeder mechanism that can control the insertion/retraction DoF of a colonoscope, and (iii) a complementary and intuitive user interface that enables simultaneous control of all DoFs during the procedure. To analyze the design of the proposed mechanisms, we also introduce a mathematical modeling approach and a design space for optimal selection of the parameters involved in the design of gripping and feeder mechanisms. Our simulation and experimental studies thoroughly demonstrate the performance of the proposed mathematical modeling and robotic framework.

cs.RO

Augmented Bridge Spinal Fixation: A New Concept for Addressing Pedicle Screw Pullout via a Steerable Drilling Robot and Flexible Pedicle Screws

To address the screw loosening and pullout limitations of rigid pedicle screws in spinal fixation procedures, and to leverage our recently developed Concentric Tube Steerable Drilling Robot (CT-SDR) and Flexible Pedicle Screw (FPS), in this paper, we introduce the concept of Augmented Bridge Spinal Fixation (AB-SF). In this concept, two connecting J-shape tunnels are first drilled through pedicles of vertebra using the CT-SDR. Next, two FPSs are passed through this tunnel and bone cement is then injected through the cannulated region of the FPS to form an augmented bridge between two pedicles and reinforce strength of the fixated spine. To experimentally analyze and study the feasibility of AB-SF technique, we first used our robotic system (i.e., a CT-SDR integrated with a robotic arm) to create two different fixation scenarios in which two J-shape tunnels, forming a bridge, were drilled at different depth of a vertebral phantom. Next, we implanted two FPSs within the drilled tunnels and then successfully simulated the bone cement augmentation process.

cs.RO

S3D: A Spatial Steerable Surgical Drilling Framework for Robotic Spinal Fixation Procedures

In this paper, we introduce S3D: A Spatial Steerable Surgical Drilling Framework for Robotic Spinal Fixation Procedures. S3D is designed to enable realistic steerable drilling while accounting for the anatomical constraints associated with vertebral access in spinal fixation (SF) procedures. To achieve this, we first enhanced our previously designed concentric tube Steerable Drilling Robot (CT-SDR) to facilitate steerable drilling across all vertebral levels of the spinal column. Additionally, we propose a four-Phase calibration, registration, and navigation procedure to perform realistic SF procedures on a spine holder phantom by integrating the CT-SDR with a seven-degree-of-freedom robotic manipulator. The functionality of this framework is validated through planar and out-of-plane steerable drilling experiments in vertebral phantoms.

cs.RO

Towards Design and Development of a Concentric Tube Steerable Drilling Robot for Creating S-shape Tunnels for Pelvic Fixation Procedures

Current pelvic fixation techniques rely on rigid drilling tools, which inherently constrain the placement of rigid medical screws in the complex anatomy of pelvis. These constraints prevent medical screws from following anatomically optimal pathways and force clinicians to fixate screws in linear trajectories. This suboptimal approach, combined with the unnatural placement of the excessively long screws, lead to complications such as screw misplacement, extended surgery times, and increased radiation exposure due to repeated X-ray images taken ensure to safety of procedure. To address these challenges, in this paper, we present the design and development of a unique 4 degree-of-freedom (DoF) pelvic concentric tube steerable drilling robot (pelvic CT-SDR). The pelvic CT-SDR is capable of creating long S-shaped drilling trajectories that follow the natural curvatures of the pelvic anatomy. The performance of the pelvic CT-SDR was thoroughly evaluated through several S-shape drilling experiments in simulated bone phantoms.

cs.RO

A consistent treatment of dynamic contact angles in the sharp-interface framework with the generalized Navier boundary condition

In this work, we revisit the Generalized Navier Boundary condition (GNBC) introduced by Qian et al.\ in the sharp interface Volume-of-Fluid context. We replace the singular uncompensated Young stress by a smooth function with a characteristic width $\varepsilon > 0$ that is understood as a physical parameter of the model. Therefore, we call the model the ``Contact Region GNBC'' (CR-GNBC). We show that the model is consistent with the fundamental kinematics of the contact angle transport described by Fricke, K\"ohne and Bothe. We implement the model in the geometrical Volume-of-Fluid solver Basilisk using a ``free angle'' approach. This means that the dynamic contact angle is not prescribed but reconstructed from the interface geometry and subsequently applied as an input parameter to compute the uncompensated Young stress. We couple this approach to the two-phase Navier Stokes solver and study the withdrawing tape problem with a receding contact line. It is shown that the model allows for grid-independent solutions and leads to a full regularization of the singularity at the moving contact line, which is in accordance with the thin-film equation subject to this boundary condition. In particular, it is shown that the curvature at the moving contact line is finite and mesh converging. As predicted by the fundamental kinematics, the parallel shear stress component vanishes at the moving contact line for quasi-stationary states (i.e. for $\dot{\theta}_d=0$) and the dynamic contact angle is determined by a balance between the uncompensated Young stress and an effective contact line friction. Furthermore, a non-linear generalization of the model is proposed, which aims at reproducing the Molecular Kinetic Theory of Blake and Haynes for quasi-stationary states.

physics.flu-dyn

Towards the Feasibility Analysis and Additive Manufacturing of a Novel Flexible Pedicle Screw for Spinal Fixation Procedures

In this paper, we explore the feasibility of developing a novel flexible pedicle screw (FPS) for enhanced spinal fixation of osteoporotic vertebrae. Vital for spinal fracture treatment, pedicle screws have been around since the early 20th century and have undergone multiple iterations to enhance internal spinal fixation. However, spinal fixation treatments tend to be problematic for osteoporotic patients due to multiple inopportune variables. The inherent rigid nature of the pedicle screw, along with the forced linear trajectory of the screw path, frequently leads to the placement of these screws in highly osteoporotic regions of the bone. This results in eventual screw slippage and causing neurological and respiratory problems for the patient. To address this problem, we focus on developing a novel FPS that is structurally capable of safely bending to fit curved trajectories drilled by a steerable drilling robot and bypass highly osteoporotic regions of the vertebral body. Afterwards, we simulate its morphability capabilities using finite element analysis (FEA). We then additively manufacture the FPS using stainless steel (SS) 316L alloy through direct metal laser sintering (DMLS). Finally, the fabricated FPS is experimentally evaluated for its bending performance and compared with the FEA results for verification. Results demonstrate the feasibility of additive manufacturing of FPS using DMLS approach and agreement of the developed FEA with the experiments.

cs.RO

Robot-Enabled Machine Learning-Based Diagnosis of Gastric Cancer Polyps Using Partial Surface Tactile Imaging

In this paper, to collectively address the existing limitations on endoscopic diagnosis of Advanced Gastric Cancer (AGC) Tumors, for the first time, we propose (i) utilization and evaluation of our recently developed Vision-based Tactile Sensor (VTS), and (ii) a complementary Machine Learning (ML) algorithm for classifying tumors using their textural features. Leveraging a seven DoF robotic manipulator and unique custom-designed and additively-manufactured realistic AGC tumor phantoms, we demonstrated the advantages of automated data collection using the VTS addressing the problem of data scarcity and biases encountered in traditional ML-based approaches. Our synthetic-data-trained ML model was successfully evaluated and compared with traditional ML models utilizing various statistical metrics even under mixed morphological characteristics and partial sensor contact.

cs.RO

Spatial Spinal Fixation: A Transformative Approach Using a Unique Robot-Assisted Steerable Drilling System and Flexible Pedicle Screw

Spinal fixation procedures are currently limited by the rigidity of the existing instruments and pedicle screws leading to fixation failures and rigid pedicle screw pull out. Leveraging our recently developed Concentric Tube Steerable Drilling Robot (CT-SDR) in integration with a robotic manipulator, to address the aforementioned issue, here we introduce the transformative concept of Spatial Spinal Fixation (SSF) using a unique Flexible Pedicle Screw (FPS). The proposed SSF procedure enables planar and out-of-plane placement of the FPS throughout the full volume of the vertebral body. In other words, not only does our fixation system provide the option of drilling in-plane and out-of-plane trajectories, it also enables implanting the FPS inside linear (represented by an I-shape) and/or non-linear (represented by J-shape) trajectories. To thoroughly evaluate the functionality of our proposed robotic system and the SSF procedure, we have performed various experiments by drilling different I-J and J-J drilling trajectory pairs into our custom-designed L3 vertebral phantoms and analyzed the accuracy of the procedure using various metrics.

cs.RO

Towards Biomechanical Evaluation of a Transformative Additively Manufactured Flexible Pedicle Screw for Robotic Spinal Fixation

Vital for spinal fracture treatment, pedicle screw fixation is the gold standard for spinal fixation procedures. Nevertheless, due to the screw pullout and loosening issues, this surgery often fails to be effective for patients suffering from osteoporosis (i.e., having low bone mineral density). These failures can be attributed to the rigidity of existing drilling instruments and pedicle screws forcing clinicians to place these implants into the osteoporotic regions of the vertebral body. To address this critical issue, we have developed a steerable drilling robotic system and evaluated its performance in drilling various J- and U-shape trajectories. Complementary to this robotic system, in this paper, we propose design, additive manufacturing, and biomechanical evaluation of a transformative flexible pedicle screw (FPS) that can be placed in pre-drilled straight and curved trajectories. To evaluate the performance of the proposed flexible implant, we designed and fabricated two different types of FPSs using the direct metal laser sintering (DMLS) process. Utilizing our unique experimental setup and ASTM standards, we then performed various pullout experiments on these FPSs to evaluate and analyze their biomechanical performance implanted in straight trajectories.

cs.RO

A Patient-Specific Framework for Autonomous Spinal Fixation via a Steerable Drilling Robot

In this paper, with the goal of enhancing the minimally invasive spinal fixation procedure in osteoporotic patients, we propose a first-of-its-kind image-guided robotic framework for performing an autonomous and patient-specific procedure using a unique concentric tube steerable drilling robot (CT-SDR). Particularly, leveraging a CT-SDR, we introduce the concept of J-shape drilling based on a pre-operative trajectory planned in CT scan of a patient followed by appropriate calibration, registration, and navigation steps to safely execute this trajectory in real-time using our unique robotic setup. To thoroughly evaluate the performance of our framework, we performed several experiments on two different vertebral phantoms designed based on CT scan of real patients.

cs.RO

The atomizing pulsed jet

Direct Numerical Simulations of the injection of a pulsed round liquid jet in a stagnant gas are performed in a series of runs of geometrically progressing resolution. The Reynolds and Weber numbers and the density ratio are sufficiently large for reaching a complex high-speed atomization regime but not so large so that the small length scales of the flow are impossible to resolve, except for very small liquid-sheet thickness. The Weber number based on grid size is then small, an indication that the simulations are very well resolved. Computations are performed using octree adaptive mesh refinement with a finite volume method and height-function computation of curvature, down to a specified minimum grid size $\Delta$. Qualitative analysis of the flow and its topology reveals a complex structure of ligaments, sheets, droplets and bubbles that evolve and interact through impacts, ligament breakup, sheet rupture and engulfment of air bubbles in the liquid. A rich gallery of images of entangled structures is produced. Most processes occurring in this type of atomization are reproduced in detail, except at the instant of thin sheet perforation or breakup. We analyze droplet statistics, showing that as the grid resolution is increased, the small-scale part of the distribution does not converge, and contains a large number of droplets close in order of magnitude to the minimum grid size with a significant peak at $d = 3\Delta$. This non-convergence arises from the numerical sheet breakup effect, in which the interface becomes rough just before it breaks. The rough appearance of the interface is associated to a high-wavenumber oscillation of the curvature. To recover convergence, we apply the controlled "manifold death" numerical procedure, in which thin sheets are detected, and then pierced by fiat before they reach a set critical thickness $h_c$.

physics.flu-dyn