arXiv subjects

Yasutomo Ota

Publications and source records attributed to Yasutomo Ota.

At least 37 records · Page 2Linked to original sources

arXiv2022

Topologically-protected single-photon sources with topological slow light photonic crystal waveguides

Slow light waveguides are advantageous for implementing high-performance single-photon sources required for scalable operation of integrated quantum photonic circuits (IQPCs), though such waveguides are known to suffer from propagation loss due to backscattering. A way to overcome the drawback is to use topological photonics, in which robust waveguiding in topologically-protected optical modes has recently been demonstrated. Here, we report single-photon sources using single quantum dots (QDs) embedded in topological slow light waveguides based on valley photonic crystals. We observe Purcell-enhanced single-photon emission from a QD into a topological slow light mode with a group index over 20 and its robust propagation even under the presence of sharp bends. These results pave the way for the realization of robust and high-performance single-photon sources indispensable for IQPCs.

physics.optics↗

arXiv2022

Time-resolved physical spectrum in cavity quantum electrodynamics

The time-resolved physical spectrum of luminescence is theoretically studied for a standard cavity quantum electrodynamics system. In contrast to the power spectrum for the steady state, the correlation functions up to the present time are crucial for the construction of the time-resolved spectrum, while the correlations with future quantities are inaccessible because of the causality, i.e., the future quantities cannot be measured until the future comes. We find that this causality plays a key role to understand the time-resolved spectrum, in which the Rabi doublet can never be seen during the time of the first peak of the Rabi oscillation. Furthermore, the causality can influence on the transient magnitude of the Rabi doublet in some situations. We also study the dynamics of the Fano anti-resonance, where the difference from the Rabi doublet can be highlighted.

quant-ph↗

arXiv2022

A large-scale single-mode array laser based on a topological edge mode

Topological lasers have been intensively investigated as a strong candidate for robust single-mode lasers. A typical topological laser employs a single-mode topological edge state, which appears deterministically in a designed topological bandgap and exhibits robustness to disorder. These properties seem to be highly attractive in pursuit of high power lasers capable of single mode operation. In this paper, we theoretically analyze a large-scale single-mode laser based on a topological edge state. We consider a sizable array laser consisting of a few hundreds of site resonators, which support a single topological edge mode broadly distributed among the resonators. We build a basic model describing the laser using the tight binding approximation and evaluate the stability of single mode lasing based on the threshold gain difference $Δα$ between the first-lasing edge mode and the second-lasing competing bulk mode. Our calculations demonstrate that stronger couplings between the cavities and lower losses are advantageous for achieving stable operation of the device. When assuming an average coupling of 100 cm$^{-1}$ between site resonators and other realistic parameters, the threshold gain difference $Δα$ can reach about 2 cm$^{-1}$, which would be sufficient for stable single mode lasing using a conventional semiconductor laser architecture. We also consider the effects of possible disorders and long-range interactions to assess the robustness of the laser under non-ideal situations. These results lay the groundwork for developing single-mode high-power topological lasers.

physics.optics↗

arXiv2021

Unidirectional output from a quantum-dot single-photon source hybrid integrated on silicon

We report a quantum-dot single-photon source (QD SPS) hybrid integrated on a silicon waveguide embedding a photonic crystal mirror, which reflects photons and enables efficient unidirectional output from the waveguide. The silicon waveguide is constituted of a subwavelength grating so as to maintain the high efficiency even under the presence of stacking misalignment accompanied by hybrid integration processes. Experimentally, we assembled the hybrid photonic structure by transfer printing, and demonstrated single-photon generation from a QD and its unidirectional output from the waveguide. These results point out a promising approach toward scalable integration of SPSs on silicon quantum photonics platforms.

physics.optics↗

arXiv2021

Synthetic dimension band structures on a Si CMOS photonic platform

Synthetic dimensions, which simulate spatial coordinates using non-spatial degrees of freedom, are drawing interest in topological science and other fields for modelling higher-dimensional phenomena on simple structures. We present the first realization of a synthetic frequency dimension on a silicon ring resonator photonic device fabricated using a CMOS process. We confirm that its coupled modes correspond to a 1D tight-binding model through acquisition of up to 280 GHz bandwidth optical frequency comb-like spectra, and by measuring the first synthetic band structures on an integrated device. Furthermore, we realized two types of gauge potentials along the frequency dimension, and probed their effects through the associated band structures. An electric field analogue was produced via modulation detuning, whereas effective magnetic fields were induced using synchronized nearest- and second-nearest-neighbor coupling. Creation of coupled mode lattices and two effective forces on a monolithic Si CMOS device represents a key step towards wider adoption of topological principles.

physics.optics↗

arXiv2021

Experimental demonstration of topological slow light waveguides in valley photonic crystals

We experimentally demonstrate topological slow light waveguides in valley photonic crystals (VPhCs). We employed a bearded interface formed between two topologically-distinct VPhCs patterned in an air-bridged silicon slab. The interface supports both topological and non-topological slow light modes below the light line. By means of optical microscopy, we observed light propagation in the topological mode in the slow light regime with a group index $n_{\rm g}$ over $30$. Furthermore, we confirmed light transmission via the slow light mode even under the presence of sharp waveguide bends. In comparison between the topological and non-topological modes, we found that the topological mode exhibits much more efficient waveguiding than the trivial one, elucidating topological protection in the slow light regime. This work paves the way for exploring topological slow-light devices compatible with existing photonics technologies.

physics.optics↗

arXiv2020

Strong coupling between a single quantum dot and an L4/3 photonic crystal nanocavity

We demonstrate strong coupling between a single quantum dot and a GaAs-based L4/3-type photonic crystal nanocavity. The L4/3 cavity supports a high theoretical Q factor (~8{\times}10^6), a small mode volume (~0.32 (λ/n)^3), and an electric field distribution with the maximum electric field lying within the host dielectric material, which facilitates strong coupling with a quantum dot. We fabricated L4/3 cavities and observed a high Q factor over 80,000 using photoluminescence measurement. We confirmed strong coupling between a single quantum dot and an L4/3 cavity with a Q factor of 33,000 by observing a clear anti-crossing in the spectra.

quant-ph↗

arXiv2020

Microcavity-based Generation of Full Poincaré Beams with Arbitrary Skyrmion Numbers

A full Poincaré (FP) beam possesses all possible optical spin states in its cross-section, which constitutes an optical analogue of a skyrmion. Until now, FP beams have been exclusively generated using bulk optics. Here, we propose a generation scheme of an FP beam based on an optical microring cavity. We position two different angular gratings along with chiral lines on a microring cavity and generate an FP beam as a superposition of two light beams with controlled spin and orbital angular momenta. We numerically show that FP beams with tailored skyrmion numbers can be generated from this device, opening a route for developing compact light sources with unique optical spin fields.

physics.optics↗

arXiv2020

Surface-passivated high-Q GaAs photonic crystal nanocavity with quantum dots

Photonic crystal (PhC) nanocavities with high quality (Q) factors have attracted much attention because of their strong spatial and temporal light confinement capability. The resulting enhanced light-matter interactions are beneficial for diverse photonic applications, ranging from on-chip optical communications to sensing. However, currently achievable Q factors for active PhC nanocavities, which embed active emitters inside, are much lower than those of the passive structures because of large optical loss, presumably originating from light scattering by structural imperfections and/or optical absorptions. Here, we demonstrate a significant improvement of Q factors up to ~160,000 in GaAs active PhC nanocavities using a sulfur-based surface passivation technique. This value is the highest ever reported for any active PhC nanocavities with semiconductor quantum dots. The surface-passivated cavities also exhibit reduced variation in both Q factors and cavity resonant wavelengths. We find that the improvement in the cavity performance presumably arises from suppressed light absorption at the surface of the PhC's host material by performing a set of PL measurements in spectral and time domains. With the surface passivation technique, we also demonstrate a strongly-coupled single quantum dot-cavity system based on a PhC nanocavity with a high Q factor of ~100,000. These results will pave the way for advanced quantum dot-based cavity quantum electrodynamics and for GaAs micro/nanophotonic applications containing active emitters.

physics.app-ph↗

arXiv2019

Active topological photonics

Topological photonics has emerged as a novel route to engineer the flow of light. Topologically-protected photonic edge modes, which are supported at the perimeters of topologically-nontrivial insulating bulk structures, have been of particular interest as they may enable low-loss optical waveguides immune to structural disorder. Very recently, there is a sharp rise of interest in introducing gain materials into such topological photonic structures, primarily aiming at revolu-tionizing semiconductor lasers with the aid of physical mechanisms existing in topological physics. Examples of re-markable realizations are topological lasers with unidirectional light output under time-reversal symmetry breaking and topologically-protected polariton and micro/nano-cavity lasers. Moreover, the introduction of gain and loss provides a fascinating playground to explore novel topological phases, which are in close relevance to non-Hermitian and parity-time symmetric quantum physics and are in general difficult to access using fermionic condensed matter systems. Here, we review the cutting-edge research on active topological photonics, in which optical gain plays a pivotal role. We discuss recent realizations of topological lasers of various kinds, together with the underlying physics explaining the emergence of topological edge modes. In such demonstrations, the optical modes of the topological lasers are deter-mined by the dielectric structures and support lasing oscillation with the help of optical gain. We also address recent researches on topological photonic systems in which gain and loss themselves essentially influence on topological prop-erties of the bulk systems. We believe that active topological photonics provides powerful means to advance mi-cro/nanophotonics systems for diverse applications and topological physics itself as well.

physics.optics↗

arXiv2019

In-situ wavelength tuning of quantum-dot single-photon sources integrated on a CMOS silicon chip

Silicon quantum photonics provides a promising pathway to realize large-scale quantum photonic integrated circuits (QPICs) by exploiting the power of complementary-metal-oxide-semiconductor (CMOS) technology. Toward scalable operation of such silicon-based QPICs, a straightforward approach is to integrate deterministic single-photon sources (SPSs). To this end, hybrid integration of deterministic solid-state SPSs, such as those based on InAs/GaAs quantum dots (QDs), is highly promising. However, the spectral and spatial randomness inherent in the QDs pose a serious challenge for scalable implementation of multiple identical SPSs on a silicon CMOS chip. To overcome this challenge, we have been investigating a new hybrid integration technique called transfer printing, which is based on a pick-and-place operation and allows for the integration of desired QD SPSs on any locations on the silicon CMOS chips at will. Nevertheless, even in this scenario, in-situ fine tuning for perfect wavelength matching among the integrated QD SPSs will be required for interfering photons from the dissimilar sources. Here, we demonstrate in-situ wavelength tuning of QD SPSs integrated on a CMOS silicon chip. To thermally tune the emission wavelengths of the integrated QDs, we augmented the QD SPSs with optically driven heating pads. The integration of all the necessary elements was performed using transfer printing, which largely simplified the fabrication of the three-dimensional stack of micro/nanophotonic structures. We further demonstrate in-situ wavelength matching between two dissimilar QD sources integrated on the same silicon chip. Our transfer-printing-based approach will open the possibility for realizing large-scale QPICs that leverage CMOS technology.

physics.app-ph↗

arXiv2019

Single plasmon generation in an InAs/GaAs quantum dot in a transfer-printed plasmonic microring resonator

We report single plasmon generation with a self-assembled InAs/GaAs quantum dot embedded in a plasmonic microring resonator. The plasmonic cavity based on a GaAs microring is defined on an atomically-smooth silver surface. We fabricated this structure with the help of transfer printing, which enables the pick-and-place assembly of the complicated, heterogeneous three dimensional stack. We show that a high-order surface-plasmon-polariton transverse mode mediates efficient coupling between the InAs/GaAs quantum dots and the plasmonic cavity, paving the way for developing plasmonic quantum light sources based on the state-of-the-art solid-state quantum emitters. Experimentally, we observed Purcell-enhanced radiation from the quantum dot coupled to the plasmonic mode. We also observed a strong anti-bunching in the intensity correlation histogram measured for scattered photons from the plasmonic resonator, indicating single plasmon generation in the resonator. Our results will be important in the development of quantum plasmonic circuits integrating high-performance single plasmon generators.

physics.optics↗

arXiv2019

GaAs valley photonic crystal waveguide with light-emitting InAs quantum dots

We report a valley photonic crystal (VPhC) waveguide in a GaAs slab with InAs quantum dots (QDs) as an internal light source exploited for experimental characterization of the waveguide. A topological interface state formed at the interface between two topologically-distinct VPhCs is used as the waveguide mode. We demonstrate robust propagation for near-infrared light emitted from the QDs even under the presence of sharp bends as a consequence of the topological protection of the guided mode. Our work will be of importance for developing robust photonic integrated circuits with small footprints, as well as for exploring active semiconductor topological photonics.

physics.optics↗

arXiv2019

Spin-dependent directional emission from an asymmetry optical waveguide with an embedded quantum dot ensemble

In this study, we examine a photonic wire waveguide embedded with an ensemble of quantum dots that directionally emits into the waveguide depending on the spin state of the ensemble. This is accomplished through the aid of the spin-orbit interaction of light. The waveguide has a two-step stair-like cross section and embeds quantum dots (QDs) only in the upper step, such that the circular polarization of emission from the spin-polarized QDs controls the direction of the radiation. We numerically verify that more than 70% of the radiation from the ensemble emitter is toward a specific direction in the waveguide. We also examine a microdisk resonator with a stair-like edge, that supports selective coupling of the QD ensemble radiation into a whispering galley mode rotating unidirectionally. Our study provides a foundation for spin-dependent optoelectronic devices.

physics.optics↗

arXiv2018

Quantum-dot single-photon source on a CMOS silicon photonic chip integrated using transfer printing

Silicon photonics is a powerful platform for implementing large-scale photonic integrated circuits (PICs), because of its compatibility with mature complementary-metal-oxide-semiconductor (CMOS) technology. Exploiting silicon-based PICs for quantum photonic information processing (or the so-called silicon quantum photonics) provides a promising pathway for large-scale quantum applications. For the development of scalable silicon quantum PICs, a major challenge is integrating on-silicon quantum light sources that deterministically emit single photons. In this regard, the use of epitaxial InAs/GaAs quantum dots (QDs) is a very promising approach, because of their capability of deterministic single-photon emission with high purity and indistinguishability. However, the required hybrid integration is inherently difficult and often lacks the compatibility with CMOS processes. Here, we demonstrate a QD single-photon source (SPS) integrated on a glass-clad silicon photonic waveguide processed by a CMOS foundry. Hybrid integration is performed using transfer printing, which enables us to integrate heterogeneous optical components in a simple pick-and-place manner and thus assemble them after the entire CMOS process is completed. We observe single-photon emission from the integrated QD and its efficient coupling into the silicon waveguide. Our transfer-printing-based approach is fully compatible with CMOS back-end processes, and thus will open the possibility for realizing large-scale quantum PICs that leverage CMOS technology.

physics.app-ph↗

arXiv2018

Photonic crystal nanocavity based on a topological corner state

Topological phonics has emerged as a novel approach to engineer the flow of light and provides unprecedented means for developing diverse photonic elements, including robust optical waveguides immune to structural imperfections. However, the development of nanoscale standing-wave cavities in topological photonics is rather slow, despite its importance when building densely-integrated photonic integrated circuits. In this Letter, we report a photonic crystal nanocavity based on a topological corner state, supported at a 90-degrees-angled rim of a two dimensional photonic crystal. A combination of the bulk-edge and edge-corner correspondences guarantees the presence of the higher-order topological state in a hierarchical manner. We experimentally observed a corner mode that is tightly localized in space while supporting a high Q factor over 2,000, verifying its promise as a nanocavity. These results cast new light on the way to introduce nanocavities in topological photonics platforms.

cond-mat.mes-hall↗

arXiv2018

Optical coupling between atomically-thin black phosphorus and a two dimensional photonic crystal nanocavity

Atomically-thin black phosphorus (BP) is an emerging two dimensional (2D) material exhibiting bright photoluminescence in the near infrared. Coupling its radiation to photonic nanostructures will be an important step toward the realization of 2D material based nanophotonic devices that operate efficiently in the near infrared, which includes the technologically important optical telecommunication wavelength bands. In this letter, we demonstrate the optical coupling between atomically-thin BP and a 2D photonic crystal nanocavity. We employed a home-build dry transfer apparatus for placing a thin BP flake on the surface of the nanocavity. Their optical coupling was analyzed through measuring cavity mode emission under optical carrier injection at room temperature.

cond-mat.mes-hall↗

arXiv2018

Strongly coupled single quantum dot-cavity system integrated on a CMOS-processed silicon photonic chip

Quantum photonic integrated circuit (QPIC) is a promising tool for constructing integrated devices for quantum technology applications. In the optical regime, silicon photonics empowered by complementary-metal-oxide-semiconductor (CMOS) technology provides optical components useful for realizing large-scale QPICs. Optical nonlinearity at the single-photon level is required for QPIC to facilitate photon-photon interaction. However, to date, realization of optical elements with deterministic( i.e., not probabilistic) single-photon nonlinearity by using silicon-based components is challenging, despite the enhancement of the functionality of QPICs based on silicon photonics. In this study, we realize for the first time a strongly coupled InAs/GaAs quantum dot-cavity quantum electrodynamics (QED) system on a CMOS-processed silicon photonic chip. The heterogeneous integration of the GaAs cavity on the silicon chip is performed by transfer printing. The cavity QED system on the CMOS photonic chip realized in this work is a promising candidate for on-chip single-photon nonlinear element, which constitutes the fundamental component for future applications based on QPIC, such as, coherent manipulation and nondestructive measurement of qubit states via a cavity, and efficient single-photon filter and router.

cond-mat.mes-hall↗