arXiv subjects

Ye Zhu

Publications and source records attributed to Ye Zhu.

At least 91 records · Page 5Linked to original sources

arXiv2021

Breath to Pair (B2P): Respiration-Based Pairing Protocol for Wearable Devices

We propose Breath to Pair (B2P), a protocol for pairing and shared-key generation for wearable devices that leverages the wearer's respiration activity to ensure that the devices are part of the same body-area network. We assume that the devices exploit different types of sensors to extract and process the respiration signal. We illustrate B2P for the case of two devices that use respiratory inductance plethysmography (RIP) and accelerometer sensors, respectively. Allowing for different types of sensors in pairing allows us to include wearable devices that use a variety of different sensors. In practice, this form of sensor variety creates a number of challenges that limit the ability of the shared-key establishment algorithm to generate matching keys. The two main obstacles are the lack of synchronization across the devices and the need for correct noise-induced mismatches between the generated key bit-strings. B2P addresses the synchronization challenge by utilizing Change Point Detection (CPD) to detect abrupt changes in the respiration signal and consider their occurrences as synchronizing points. Any potential mismatches are handled by optimal quantization and encoding of the respiration signal in order to maximize the error correction rate and minimize the message overheads. Extensive evaluation on a dataset collected from 30 volunteers demonstrates that our protocol can generate a secure 256-bit key every 2.85 seconds (around one breathing cycle). Particular attention is given to secure B2P against device impersonation attacks.

cs.CR↗

arXiv2021

A Survey of Wearable Devices Pairing Based on Biometric Signals

With the growth of wearable devices, which are usually constrained in computational power and user interface, this pairing has to be autonomous. Considering devices that do not have prior information about each other, a secure communication should be established by generating a shared secret key derived from a common context between the devices. Context-based pairing solutions increase the usability of wearable device pairing by eliminating any human involvement in the pairing process. This is possible by utilizing onboard sensors (with the same sensing modalities) to capture a common physical context (e.g., body motion, gait, heartbeat, respiration, and EMG signal). A wide range of approaches has been proposed to address autonomous pairing in wearable devices. This paper surveys context-based pairing in wearable devices by focusing on the signals and sensors exploited. We review the steps needed for generating a common key and provide a survey of existing techniques utilized in each step.

cs.CR↗

arXiv2021

Improving the Effectiveness and Efficiency of Stochastic Neighbour Embedding with Isolation Kernel

This paper presents a new insight into improving the performance of Stochastic Neighbour Embedding (t-SNE) by using Isolation kernel instead of Gaussian kernel. Isolation kernel outperforms Gaussian kernel in two aspects. First, the use of Isolation kernel in t-SNE overcomes the drawback of misrepresenting some structures in the data, which often occurs when Gaussian kernel is applied in t-SNE. This is because Gaussian kernel determines each local bandwidth based on one local point only, while Isolation kernel is derived directly from the data based on space partitioning. Second, the use of Isolation kernel yields a more efficient similarity computation because data-dependent Isolation kernel has only one parameter that needs to be tuned. In contrast, the use of data-independent Gaussian kernel increases the computational cost by determining n bandwidths for a dataset of n points. As the root cause of these deficiencies in t-SNE is Gaussian kernel, we show that simply replacing Gaussian kernel with Isolation kernel in t-SNE significantly improves the quality of the final visualisation output (without creating misrepresented structures) and removes one key obstacle that prevents t-SNE from processing large datasets. Moreover, Isolation kernel enables t-SNE to deal with large-scale datasets in less runtime without trading off accuracy, unlike existing methods in speeding up t-SNE.

cs.LG↗

arXiv2021

Saying the Unseen: Video Descriptions via Dialog Agents

Current vision and language tasks usually take complete visual data (e.g., raw images or videos) as input, however, practical scenarios may often consist the situations where part of the visual information becomes inaccessible due to various reasons e.g., restricted view with fixed camera or intentional vision block for security concerns. As a step towards the more practical application scenarios, we introduce a novel task that aims to describe a video using the natural language dialog between two agents as a supplementary information source given incomplete visual data. Different from most existing vision-language tasks where AI systems have full access to images or video clips, which may reveal sensitive information such as recognizable human faces or voices, we intentionally limit the visual input for AI systems and seek a more secure and transparent information medium, i.e., the natural language dialog, to supplement the missing visual information. Specifically, one of the intelligent agents - Q-BOT - is given two semantic segmented frames from the beginning and the end of the video, as well as a finite number of opportunities to ask relevant natural language questions before describing the unseen video. A-BOT, the other agent who has access to the entire video, assists Q-BOT to accomplish the goal by answering the asked questions. We introduce two different experimental settings with either a generative (i.e., agents generate questions and answers freely) or a discriminative (i.e., agents select the questions and answers from candidates) internal dialog generation process. With the proposed unified QA-Cooperative networks, we experimentally demonstrate the knowledge transfer process between the two dialog agents and the effectiveness of using the natural language dialog as a supplement for incomplete implicit visions.

cs.CV↗

arXiv2021

Epitaxial growth of Ruddlesden-Popper neodymium nickelates Nd$_{n+1}$Ni$_{n}$O$_{3n+1}$ (${n}$ = 1-5)

A series of Ruddlesden-Popper nickelates, Nd$_{n+1}$Ni$_{n}$O$_{3n+1}$ (${n}$ = 1-5), have been stabilized in thin film form using reactive molecular-beam epitaxy. High crystalline quality has been verified by X-ray diffraction and scanning transmission electron microscopy. X-ray photoelectron spectroscopy indicates the ${n}$-dependent valence states of nickel in these compounds. Metal-insulator transitions show clear ${n}$ dependence for intermediate members (${n}$ = 3-5), and the low-temperature resistivities of which show logarithmic dependence, resembling the Kondo-scattering as observed in the parent compounds of superconducting infinite-layer nickelates.

cond-mat.supr-con↗

arXiv2021

Real Time Video based Heart and Respiration Rate Monitoring

In recent years, research about monitoring vital signs by smartphones grows significantly. There are some special sensors like Electrocardiogram (ECG) and Photoplethysmographic (PPG) to detect heart rate (HR) and respiration rate (RR). Smartphone cameras also can measure HR by detecting and processing imaging Photoplethysmographic (iPPG) signals from the video of a user's face. Indeed, the variation in the intensity of the green channel can be measured by the iPPG signals of the video. This study aimed to provide a method to extract heart rate and respiration rate using the video of individuals' faces. The proposed method is based on measuring fluctuations in the Hue, and can therefore extract both HR and RR from the video of a user's face. The proposed method is evaluated by performing on 25 healthy individuals. For each subject, 20 seconds video of his/her face is recorded. Results show that the proposed approach of measuring iPPG using Hue gives more accurate rates than the Green channel.

eess.IV↗

arXiv2021

Impact of Cation Stoichiometry on the Crystalline Structure and Superconductivity in Nickelates

The recent discovery of superconductivity in infinite-layer nickelate films has aroused great interest since it provides a new platform to explore the mechanism of high-temperature superconductivity. However, superconductivity only appears in the thin film form and synthesizing superconducting nickelate films is extremely challenging, limiting the in-depth studies on this compound. Here, we explore the critical parameters in the growth of high quality nickelate films using molecular beam epitaxy (MBE). We found that stoichiometry is crucial in optimizing the crystalline structure and realizing superconductivity in nickelate films. In precursor NdNiO3 films, optimal stoichiometry of cations yields the most compact lattice while off-stoichiometry of cations causes obvious lattice expansion, influencing the subsequent topotactic reduction and the emergence of superconductivity in infinite-layer nickelates. Surprisingly, in-situ reflection high energy electron diffraction (RHEED) indicates that some impurity phases always appear once Sr ions are doped into NdNiO3 although the X-ray diffraction (XRD) data are of high quality. While these impurity phases do not seem to suppress the superconductivity, their impacts on the electronic and magnetic structure deserve further studies. Our work demonstrates and highlights the significance of cation stoichiometry in superconducting nickelate family.

cond-mat.supr-con↗

arXiv2021

CDF Transform-and-Shift: An effective way to deal with datasets of inhomogeneous cluster densities

The problem of inhomogeneous cluster densities has been a long-standing issue for distance-based and density-based algorithms in clustering and anomaly detection. These algorithms implicitly assume that all clusters have approximately the same density. As a result, they often exhibit a bias towards dense clusters in the presence of sparse clusters. Many remedies have been suggested; yet, we show that they are partial solutions which do not address the issue satisfactorily. To match the implicit assumption, we propose to transform a given dataset such that the transformed clusters have approximately the same density while all regions of locally low density become globally low density -- homogenising cluster density while preserving the cluster structure of the dataset. We show that this can be achieved by using a new multi-dimensional Cumulative Distribution Function in a transform-and-shift method. The method can be applied to every dataset, before the dataset is used in many existing algorithms to match their implicit assumption without algorithmic modification. We show that the proposed method performs better than existing remedies.

cs.LG↗

arXiv2021

Learning Audio-Visual Correlations from Variational Cross-Modal Generation

People can easily imagine the potential sound while seeing an event. This natural synchronization between audio and visual signals reveals their intrinsic correlations. To this end, we propose to learn the audio-visual correlations from the perspective of cross-modal generation in a self-supervised manner, the learned correlations can be then readily applied in multiple downstream tasks such as the audio-visual cross-modal localization and retrieval. We introduce a novel Variational AutoEncoder (VAE) framework that consists of Multiple encoders and a Shared decoder (MS-VAE) with an additional Wasserstein distance constraint to tackle the problem. Extensive experiments demonstrate that the optimized latent representation of the proposed MS-VAE can effectively learn the audio-visual correlations and can be readily applied in multiple audio-visual downstream tasks to achieve competitive performance even without any given label information during training.

cs.CV↗

arXiv2021

Strain engineering of epitaxial oxide heterostructures beyond substrate limitations

The limitation of commercially available single-crystal substrates and the lack of continuous strain tunability preclude the ability to take full advantage of strain engineering for further exploring novel properties and exhaustively studying fundamental physics in complex oxides. Here we report an approach for imposing continuously tunable, large epitaxial strain in oxide heterostructures beyond substrate limitations by inserting an interface layer through tailoring its gradual strain relaxation. Taking BiFeO3 as a model system, we demonstrate that the introduction of an ultrathin interface layer allows the creation of a desired strain that can induce phase transition and stabilize a new metastable super-tetragonal phase as well as morphotropic phase boundaries overcoming substrate limitations. Furthermore, continuously tunable strain from tension to compression can be generated by precisely adjusting the thickness of the interface layer, leading to the first achievement of continuous O-R-T phase transition in BiFeO3 on a single substrate. This proposed route could be extended to other oxide heterostructures, providing a platform for creating exotic phases and emergent phenomena.

cond-mat.mtrl-sci↗

arXiv2020

Adversarial decision strategies in multiple network phased oscillators: the Blue-Green-Red Kuramoto-Sakaguchi model

We consider a model of three interacting sets of decision-making agents, labeled Blue, Green and Red, represented as coupled phased oscillators subject to frustrated synchronisation dynamics. The agents are coupled on three networks of differing topologies, with interactions modulated by different cross-population frustrations, internal and cross-network couplings. The intent of the dynamic model is to examine the degree to which two of the groups of decision-makers, Blue and Red, are able to realise a strategy of being ahead of each others' decision-making cycle while internally seeking synchronisation of this process -- all in the context of further interactions with the third population, Green. To enable this analysis, we perform a significant dimensional reduction approximation and stability analysis. We compare this to a numerical solution for a range of internal and cross-network coupling parameters to investigate various synchronisation regimes and critical thresholds. The comparison reveals good agreement for appropriate parameter ranges. Performing parameter sweeps, we reveal that Blue's pursuit of a strategy of staying too-far ahead of Red's decision cycles triggers a second-order effect of the Green population being ahead of Blue's cycles. This behaviour has implications for the dynamics of multiple interacting social groups with both cooperative and competitive processes.

nlin.AO↗

arXiv2020

The Impact of Isolation Kernel on Agglomerative Hierarchical Clustering Algorithms

Agglomerative hierarchical clustering (AHC) is one of the popular clustering approaches. Existing AHC methods, which are based on a distance measure, have one key issue: it has difficulty in identifying adjacent clusters with varied densities, regardless of the cluster extraction methods applied on the resultant dendrogram. In this paper, we identify the root cause of this issue and show that the use of a data-dependent kernel (instead of distance or existing kernel) provides an effective means to address it. We analyse the condition under which existing AHC methods fail to extract clusters effectively; and the reason why the data-dependent kernel is an effective remedy. This leads to a new approach to kernerlise existing hierarchical clustering algorithms such as existing traditional AHC algorithms, HDBSCAN, GDL and PHA. In each of these algorithms, our empirical evaluation shows that a recently introduced Isolation Kernel produces a higher quality or purer dendrogram than distance, Gaussian Kernel and adaptive Gaussian Kernel.

cs.LG↗

arXiv2020

Describing Unseen Videos via Multi-Modal Cooperative Dialog Agents

With the arising concerns for the AI systems provided with direct access to abundant sensitive information, researchers seek to develop more reliable AI with implicit information sources. To this end, in this paper, we introduce a new task called video description via two multi-modal cooperative dialog agents, whose ultimate goal is for one conversational agent to describe an unseen video based on the dialog and two static frames. Specifically, one of the intelligent agents - Q-BOT - is given two static frames from the beginning and the end of the video, as well as a finite number of opportunities to ask relevant natural language questions before describing the unseen video. A-BOT, the other agent who has already seen the entire video, assists Q-BOT to accomplish the goal by providing answers to those questions. We propose a QA-Cooperative Network with a dynamic dialog history update learning mechanism to transfer knowledge from A-BOT to Q-BOT, thus helping Q-BOT to better describe the video. Extensive experiments demonstrate that Q-BOT can effectively learn to describe an unseen video by the proposed model and the cooperative learning method, achieving the promising performance where Q-BOT is given the full ground truth history dialog.

cs.CV↗

arXiv2020

Hierarchical HMM for Eye Movement Classification

In this work, we tackle the problem of ternary eye movement classification, which aims to separate fixations, saccades and smooth pursuits from the raw eye positional data. The efficient classification of these different types of eye movements helps to better analyze and utilize the eye tracking data. Different from the existing methods that detect eye movement by several pre-defined threshold values, we propose a hierarchical Hidden Markov Model (HMM) statistical algorithm for detecting fixations, saccades and smooth pursuits. The proposed algorithm leverages different features from the recorded raw eye tracking data with a hierarchical classification strategy, separating one type of eye movement each time. Experimental results demonstrate the effectiveness and robustness of the proposed method by achieving competitive or better performance compared to the state-of-the-art methods.

cs.CV↗

arXiv2019

Nearest-Neighbour-Induced Isolation Similarity and its Impact on Density-Based Clustering

A recent proposal of data dependent similarity called Isolation Kernel/Similarity has enabled SVM to produce better classification accuracy. We identify shortcomings of using a tree method to implement Isolation Similarity; and propose a nearest neighbour method instead. We formally prove the characteristic of Isolation Similarity with the use of the proposed method. The impact of Isolation Similarity on density-based clustering is studied here. We show for the first time that the clustering performance of the classic density-based clustering algorithm DBSCAN can be significantly uplifted to surpass that of the recent density-peak clustering algorithm DP. This is achieved by simply replacing the distance measure with the proposed nearest-neighbour-induced Isolation Similarity in DBSCAN, leaving the rest of the procedure unchanged. A new type of clusters called mass-connected clusters is formally defined. We show that DBSCAN, which detects density-connected clusters, becomes one which detects mass-connected clusters, when the distance measure is replaced with the proposed similarity. We also provide the condition under which mass-connected clusters can be detected, while density-connected clusters cannot.

cs.LG↗

arXiv2019

High Throughput Push Based Storage Manager

The storage manager, as a key component of the database system, is responsible for organizing, reading, and delivering data to the execution engine for processing. According to the data serving mechanism, existing storage managers are either pull-based, incurring high latency, or push-based, leading to a high number of I/O requests when the CPU is busy. To improve these shortcomings, this thesis proposes a push-based prefetching strategy in a column-wise storage manager. The proposed strategy implements an efficient cache layer to store shared data among queries to reduce the number of I/O requests. The capacity of the cache is maintained by a time access-aware eviction mechanism. Our strategy enables the storage manager to coordinate multiple queries by merging their requests and dynamically generate an optimal read order that maximizes the overall I/O throughput. We evaluated our storage manager both over a disk-based redundant array of independent disks (RAID) and an NVM Express (NVMe) solid-state drive (SSD). With the high read performance of the SSD, we successfully minimized the total read time and number of I/O accesses.

cs.DB↗

arXiv2019

Controllable Defect Driven Symmetry Change and Domain Structure Evolution in BiFeO3 with Enhanced Tetragonality

Defect engineering has been a powerful tool to enable the creation of exotic phases and the discovery of intriguing phenomena in ferroelectric oxides. However, accurate control the concentration of defects remains a big challenge. In this work, ion implantation, that can provide controllable point defects, allows us the ability to produce a controlled defect-driven true super-tetragonal (T) phase with enhanced tetragonality in ferroelectric BiFeO3 thin films. This point defect engineering is found to drive the phase transition from the as-grown mixed rhombohedral-like (R) and tetragonal-like (MC) phase to true tetragonal (T) symmetry. By further increasing the injected dose of He ion, we demonstrate an enhanced tetragonality super-tetragonal (super-T) phase with the largest c/a ratio (~ 1.3) that has ever been experimentally achieved in BiFeO3. A combination of morphology change and domain evolution further confirm that the mixed R/MC phase structure transforms to the single-domain-state true tetragonal phase. Moreover, the re-emergence of R phase and in-plane stripe nanodomains after heat treatment reveal the memory effect and reversible phase transition. Our findings demonstrate the control of R-Mc-T-super T symmetry changes and the creation of true T phase BiFeO3 with enhanced tetragonality through controllable defect engineering. This work also provides a pathway to generate large tetragonality (or c/a ratio) that could be extended to other ferroelectric material systems (such as PbTiO3, BaTiO3 and HfO2) which may lead to strong polarization enhancement.

cond-mat.mtrl-sci↗

arXiv2018

A Technical Survey on Statistical Modelling and Design Methods for Crowdsourcing Quality Control

Online crowdsourcing provides a scalable and inexpensive means to collect knowledge (e.g. labels) about various types of data items (e.g. text, audio, video). However, it is also known to result in large variance in the quality of recorded responses which often cannot be directly used for training machine learning systems. To resolve this issue, a lot of work has been conducted to control the response quality such that low-quality responses cannot adversely affect the performance of the machine learning systems. Such work is referred to as the quality control for crowdsourcing. Past quality control research can be divided into two major branches: quality control mechanism design and statistical models. The first branch focuses on designing measures, thresholds, interfaces and workflows for payment, gamification, question assignment and other mechanisms that influence workers' behaviour. The second branch focuses on developing statistical models to perform effective aggregation of responses to infer correct responses. The two branches are connected as statistical models (i) provide parameter estimates to support the measure and threshold calculation, and (ii) encode modelling assumptions used to derive (theoretical) performance guarantees for the mechanisms. There are surveys regarding each branch but they lack technical details about the other branch. Our survey is the first to bridge the two branches by providing technical details on how they work together under frameworks that systematically unify crowdsourcing aspects modelled by both of them to determine the response quality. We are also the first to provide taxonomies of quality control papers based on the proposed frameworks. Finally, we specify the current limitations and the corresponding future directions for the quality control research.

cs.HC↗