arXiv subjects

Yi-Hsiang Chen

Publications and source records attributed to Yi-Hsiang Chen.

11 recordsLinked to original sources

arXiv2026

Digital quantum magnetism on a trapped-ion quantum computer

Digital quantum matter -- realized when discrete quantum gates approximate continuous time evolution -- is susceptible to heating into chaotic, structureless states. If digitization errors are adequately suppressed, a long-lived transient regime of approximately energy-conserving dynamics can be observed on gate-based quantum computers. Conservation of energy, in turn, enables the exploration of a wide variety of complex behaviors observed in equilibrium systems, ranging from the nontrivial microscopic origins of thermalization itself to the stabilization of effective models hosting exotic emergent properties. Here, we use Quantinuum's system model H2 quantum computer to simulate digitized dynamics of the quantum Ising model, suppressing digitization errors well enough to observe thermalization on timescales that severely challenge classical simulation methods. Relaxation of an inhomogeneous state reveals an emergent hydrodynamics due to approximate energy conservation, and we compute the associated diffusion constant. By reprogramming our simulations to take place on a triangular lattice with periodic boundary conditions, we observe thermalization consistent with emergent gauge and topological constraints resulting from lattice frustration. Our results were enabled by continued advances in two-qubit gate quality (native partial entangler fidelities of $99.94(1)\%$), and establish digital quantum computers as powerful tools for studying (effectively) continuous-time dynamics.

quant-ph↗

arXiv2026

Computing with many encoded logical qubits beyond break-even

High-rate quantum error correcting (QEC) codes encode many logical qubits in a given number of physical qubits, making them promising candidates for quantum computation. Implementing high-rate codes at a scale that both frustrates classical computing and improves performance by encoding requires both high fidelity gates and long-range qubit connectivity -- both of which are offered by trapped-ion quantum computers. Here, we demonstrate computations that outperform their unencoded counterparts in the high-rate $[[ k+2,\, k,\, 2 ]]$ iceberg quantum error detecting (QED) and $[[ (k_2 + 2)(k_1 + 2),\, k_2k_1,\, 4 ]]$ two-level concatenated iceberg QEC codes, using the 98-qubit Quantinuum Helios trapped-ion quantum processor. Utilizing new gadgets for encoded operations, we realize this "beyond break-even" performance with reasonable postselection rates across a range of fault-tolerant (FT) and partially-fault-tolerant (pFT) component and application benchmarks with between $48$ and $94$ logical qubits. These benchmarks include FT state preparation and measurement, QEC cycle benchmarking, logical gate benchmarking, GHZ state preparation, and a pFT quantum simulation of the three-dimensional $XY$ model of quantum magnetism. Additionally, we illustrate that postselection rates can be suppressed by increasing the code distance via concatenation. Our results represent state-of-the-art logical component and state fidelities and provide evidence that high-rate QED/QEC codes are viable on contemporary quantum computers for near-term beyond-classical-scale computation.

quant-ph↗

arXiv2025

Randomized Benchmarking with Leakage Errors

Leakage errors are unwanted transfer of population outside of a defined computational subspace and they occur in almost every platform for quantum computing. While prevalent, leakage is often overlooked when measuring and reporting the fidelity of quantum gates with standard methods. In fact, when leakage is substantial it can cause a large overestimation of fidelity from the typical method used to measure fidelity, randomized benchmarking. We provide several methods for properly estimating fidelity in the presence of leakage errors that are applicable in different error regimes with carefully chosen sequence lengths. Then, we numerically demonstrate the methods for two-qubit randomized benchmarking, which often have the largest errors. Finally, we reanalyze previously shared data from Quantinuum systems with some of the methods provided.

quant-ph↗

arXiv2025

Faster Probabilistic Error Cancellation

Probabilistic error cancellation (PEC) is a leading quantum error mitigation method that provides an unbiased estimate, although it is known to have a large sampling overhead. In this work, we propose a new method to perform PEC, which results in a lower sampling cost than the standard way. It works by decomposing the inverse channel of each gate or each circuit layer into the identity part and the non-identity part and reorganizing the full circuit as different powers of the inverse generator. The ideal circuit becomes a linear combination of noisy circuits with different weights where shots are deterministically allocated to each circuit based on its weight. This naturally sets the achievable bias given a finite amount of shots. As the number of shots is increased, smaller bias terms can be gradually resolved and become bias-free in the limit of sufficient shots. We show the saving both analytically and numerically over the standard PEC and identify situations where it can outperform heuristic approach, such as zero-noise extrapolation, due to the well-controlled bias. We also demonstrated this method experimentally and found excellent agreement between the mitigated and the ideal values.

quant-ph↗

arXiv2025

Trotter error time scaling separation via commutant decomposition

Suppressing the Trotter error in dynamical quantum simulation typically requires running deeper circuits, posing a great challenge for noisy near-term quantum devices. Studies have shown that the empirical error is usually much smaller than the one suggested by existing bounds, implying the actual circuit cost required is much less than the ones based on those bounds. Here, we improve the estimate of the Trotter error over existing bounds, by introducing a general framework of commutant decomposition that separates disjoint error components that have fundamentally different scaling with time. In particular we identify two error components that each scale as $O(τ^pt)$ and $O(τ^p)$ for a $p$th-order product formula evolving to time $t$ using a fixed step size $τ$, it implies one would scale linearly with time $t$ and the other would be constant of $t$. We show that this formalism not only straightforwardly reproduces previous results but also provides a better error estimate for higher-order product formulas. We demonstrate the improvement both analytically and numerically. We also apply the analysis to observable error relating to the heating in Floquet dynamics and thermalization, which is of independent interest.

quant-ph↗

arXiv2024

Robustness of near-thermal dynamics on digital quantum computers

Understanding the impact of gate errors on quantum circuits is crucial to determining the potential applications of quantum computers, especially in the absence of large-scale error-corrected hardware. We put forward analytical arguments, corroborated by extensive numerical and experimental evidence, that Trotterized quantum circuits simulating the time-evolution of systems near thermal equilibrium are substantially more robust to both quantum gate errors and Trotter (discretization) errors than is widely assumed. In Quantinuum's trapped-ion computers, the weakly entangling gates that appear in Trotterized circuits can be implemented natively, and their error rate is smaller when they generate less entanglement; from benchmarking, we know that the error for a gate $\exp[-i (Z\otimes Z) τ]$ decreases roughly linearly with $τ$, up to a small offset at $τ= 0$. We provide extensive evidence that this scaling, together with the robustness of near-thermal dynamics to both gate and discretization errors, facilitates substantial improvements in the achievable accuracy of Trotterized dynamics on near-term quantum computers. We make heavy use of a new theoretical tool -- a statistical ensemble of random product states that approximates a thermal state, which can be efficiently prepared with low noise on quantum computers. We outline how the random product state ensemble can be used to predict, optimize, and design Hamiltonian simulation experiments on near-thermal quantum systems.

quant-ph↗

arXiv2021

Quantum state driving: measurements versus pulses

The quantum Zeno effect is well-known for fixing a system to an eigenstate by frequent measurements. It is also known that applying frequent unitary pulses induces a Zeno subspace that can also pin the system to an eigenspace. Both approaches have been studied as means to maintain a system in a certain subspace. Extending the two concepts, we consider making the measurements/pulses dynamical so that the state can move with the motion of the measurement axis/pulse basis. We show that the system stays in the dynamical eigenbasis when the measurements/pulses are slowly changing. Explicit bounds for the apply rate that guarantees a success probability are provided. In addition, both methods are inherently resilient against non-Markovian noise. Finally, we discuss the similarities and differences between the two methods and their connection to adiabatic quantum computation.

quant-ph↗

arXiv2021

Quantum algorithm for time-dependent Hamiltonian simulation by permutation expansion

We present a quantum algorithm for the dynamical simulation of time-dependent Hamiltonians. Our method involves expanding the interaction-picture Hamiltonian as a sum of generalized permutations, which leads to an integral-free Dyson series of the time-evolution operator. Under this representation, we perform a quantum simulation for the time-evolution operator by means of the linear combination of unitaries technique. We optimize the time steps of the evolution based on the Hamiltonian's dynamical characteristics, leading to a gate count that scales with an $L^1$-norm-like scaling with respect only to the norm of the interaction Hamiltonian, rather than that of the total Hamiltonian. We demonstrate that the cost of the algorithm is independent of the Hamiltonian's frequencies, implying its advantage for systems with highly oscillating components, and for time-decaying systems the cost does not scale with the total evolution time asymptotically. In addition, our algorithm retains the near optimal $\log(1/ε)/\log\log(1/ε)$ scaling with simulation error $ε$.

quant-ph↗

arXiv2020

Continuous quantum error detection and suppression with pairwise local interactions

Performing measurements for high-weight operators has been a practical problem in quantum computation, especially for quantum codes in the stabilizer formalism. The conventional procedure of measuring a high-weight operator requires multiple pairwise unitary operations, which can be slow and prone to errors. We provide an alternative method to passively detect the value of a high-weight operator using only two-local interactions and single-qubit continuous measurements. This approach involves joint interactions between the system and continuously-monitored ancillary qubits. The measurement outcomes from the monitor qubits reveal information about the value of the operator. This information can be retrieved by using a numerical estimator or by evaluating the time average of the signals. The interaction Hamiltonian can be effectively built using only two-local operators, based on techniques from perturbation theory. We apply this indirect detection scheme to the four-qubit Bacon-Shor code, where the two stabilizers are indirectly monitored using four ancillary qubits. Due to the fact that the four-qubit Bacon-Shor code is an error-detecting code and that the Quantum Zeno Effect can suppress errors, we also study the error suppression under the indirect measurement process. In this example, we show that various types of non-Markovian errors can be suppressed.

quant-ph↗

arXiv2019

Qubit POVMs by destructive weak measurements

Many quantum measurements, such as photodetection, can be destructive. In photodetection, when the detector clicks a photon has been absorbed and destroyed. Yet the lack of a click also gives information about the presence or absence of a photon. In monitoring the emission of photons from a source, one decomposes the strong measurement into a series of weak measurements, which describe the evolution of the state during the measurement process. Motivated by this example of destructive photon detection, a simple model of destructive weak measurements using qubits was studied in [1]. It has shown that the model can achieve any positive-operator valued measurement (POVM) with commuting POVM elements including projective measurements. In this paper, we use a different approach for decomposing any POVM into a series of weak measurements. The process involves three steps: randomly choose, with certain probabilities, a set of linearly independent POVM elements; perform that POVM by a series of destructive weak measurements; output the result of the series of weak measurements with certain probabilities. The probabilities of the outcomes from this process agree with those from the original POVM, and hence this model of destructive weak measurements can perform any qubit POVM.

quant-ph↗

arXiv2018

Decomposing qubit positive-operator valued measurements into continuous destructive weak measurements

It has been shown that any generalized measurement can be decomposed into a sequence of weak measurements corresponding to a stochastic process. However, the weak measurements may require almost arbitrary unitaries, which are unlikely to be realized by any real measurement device. Furthermore, many measurement processes are destructive, like photon counting procedures that terminate once all photons are consumed. One cannot expect to have full control of the evolution of a state under such destructive measurements, and the possible unitaries allow only a limited set of weak measurements. In this paper, we consider a qubit model of destructive weak measurements, which is a toy version of an optical cavity, in which the state of an electromagnetic field mode inside the cavity leaks out and is measured destructively while the vacuum state |0> leaks in to the cavity. At long times, the state of the qubit inevitably evolves to be |0>, and the only available control is the choice of measurement on the external ancilla system. Surprisingly, this very limited model can still perform an arbitrary projective measurement on the qubit in any basis, where the probability of getting an outcome satisfies the usual Born rule. Combining this method with probabilistic post processing, the result can be extended to any generalized measurement with commuting POVM elements. This implies, among other results, that any two-outcome POVM on a qubit can be decomposed into a sequence of destructive weak measurements by this restricted measurement device.

quant-ph↗