arXiv subjects

Yi-Siou Huang

Publications and source records attributed to Yi-Siou Huang.

10 recordsLinked to original sources

arXiv2026

Cryogenic thermo-optic response of low-loss phase change material for non-volatile photonic phase shifter

Phase change materials (PCMs) can enable non-volatile optical memory through the large refractive index and extinction coefficient contrast between crystalline and amorphous states. Among them, $\mathrm{Sb}_{2}\mathrm{Se}_{3}$ combines low optical attenuation at telecom wavelengths, making it promising for low-loss programmable phase shifters. Its non-volatility is particularly useful for cryogenic systems, where power dissipation and thermal load constrain scalability. However, its optical properties at cryogenic temperatures remains poorly understood. Here, we report the first cryogenic optical characterization of $\mathrm{Sb}_{2}\mathrm{Se}_{3}$ integrated on a foundry silicon photonic platform from 4K to 300K for both crystalline and amorphous states. We observe that the magnitude of the thermo-optic coefficient decreases upon cooling, whereas the optical attenuation changes only weakly for both the amorphous and crystalline phases. We report the stability of the material upon repeated thermal cycling. These measurements provide the material parameters and stability required to design low-loss, non-volatile photonic memory elements for scalable cryogenic information processing.

physics.optics↗

arXiv2026

Ultra-Thin Aluminum-Doped Silver for Transmissive Thermally Reconfigurable Visible Photonics

Functional materials with high electrical conductivity and optical transmittance are vital for thermally tunable free-space photonic systems. Conventional transparent conductors such as graphene and indium tin oxide are limited by high contact resistance, poor mechanical stability, or complex fabrication. Ultra-thin metals, such as pure silver, have also been explored with limited success due to thermal instability and dewetting. Here, we propose an ultra-thin Al-doped Ag film to tackle these challenges. Aluminum promotes heterogeneous nucleation of silver, enabling the formation of continuous, smooth films that are thermally stable at reduced thicknesses while maintaining excellent electrical conductivity and transparency. We find that a 12 nm Al-doped Ag film exhibits an average transmittance of 80% across the visible range with a sheet resistance of 8.3$\pm$1.16 $Ω$cm$^2$. Moreover, on-chip Al-doped Ag microheaters exhibit uniform, rapid thermal response, and stable electrical performance, maintaining functionality for over $10^7$ ON and OFF cycles at temperatures below 400$°$C. Furthermore, as a benchmark, we demonstrate reversible phase-change switching in Ge$_2$Sb$_2$Se$_4$Te (GSST) and VO$_2$. 30$\times$30 $μ$m$^2$ GSST cells exhibited complete crystallization and amorphization under 2.2 V - 200 ms and 4.1V - 50$μ$s pulses, respectively, resulting in a 40% transmission contrast at 780 nm and a tenfold improvement in power consumption compared to similar devices. Additionally, VO$_2$ films displayed reversible insulator-to-metal transitions near 65°C with reflectance and transmittance modulation in the visible and the near-infrared at frequencies up to 25 Hz with room for improvement. These results establish Al-doped Ag as a robust transparent metallic heater for integration in dynamic metasurfaces, optical coatings, and more.

physics.optics↗

arXiv2025

Incorporating Si into Sb2Se3: Tailoring Optical Phase Change Materials via Nanocomposites

Chalcogenide-based optical phase change materials (OPCMs) exhibit a large contrast in refractive index when reversibly switched between their stable amorphous and crystalline states. OPCMs have rapidly gained attention due to their versatility as nonvolatile amplitude or phase modulators in various photonic devices. However, open challenges remain, such as achieving reliable response and transparency spanning into the visible spectrum, a combination of properties in which current broadband OPCMs (e.g., Ge2Sb2Se4Te1, Sb2Se3, or Sb2S3) fall short. Discovering novel materials or engineering existing ones is, therefore, crucial in extending the application scope of OPCMs. Here, we use magnetron co-sputtering to study the effects of Si doping into Sb2Se3. We employ ellipsometry, X-ray diffraction, Raman spectroscopy, and scanning and transmission electron microscopy to investigate the effects of Si doping on the optical properties and crystal structure and compare these results with those from first principles calculations. Moreover, we study the crystallization and melt-quenching of thin films via nano-differential scanning calorimetry (NanoDSC). Our experiments demonstrate that 20% Si doping increases the transparency window in both states, specifically to 800 nm (1.55 eV) in the amorphous phase, while reducing power consumption by lowering the melting temperature. However, this reduction comes at the cost of reducing the refractive index contrast between states and slowing the kinetics of the phase transition.

cond-mat.mtrl-sci↗

arXiv2024

High-Speed Multifunctional Photonic Memory on a Foundry-Processed Photonic Platform

The integration of computing with memory is essential for distributed, massively parallel, and adaptive architectures such as neural networks in artificial intelligence (AI). Accelerating AI can be achieved through photonic computing, but it requires nonvolatile photonic memory capable of rapid updates during on-chip training sessions or when new information becomes available during deployment. Phase-change materials (PCMs) are promising for providing compact, nonvolatile optical weighting; however, they face limitations in terms of bit precision, programming speed, and cycling endurance. Here, we propose a novel photonic memory cell that merges nonvolatile photonic weighting using PCMs with high-speed, volatile tuning enabled by an integrated PN junction. Our experiments demonstrate that the same PN modulator, fabricated via a foundry compatible process, can achieve dual functionality. It supports coarse programmability for setting initial optical weights and facilitates high-speed fine-tuning to adjust these weights dynamically. The result showcases a 400-fold increase in volatile tuning speed and a 10,000-fold enhancement in efficiency. This multifunctional photonic memory with volatile and nonvolatile capabilities could significantly advance the performance and versatility of photonic memory cells, providing robust solutions for dynamic computing environments.

physics.optics↗

arXiv2024

Reconfigurable inverse designed phase-change photonics

Chalcogenide phase-change materials (PCMs) offer a promising approach to programmable photonics thanks to their nonvolatile, reversible phase transitions and high refractive index contrast. However, conventional designs are limited by global phase control over entire PCM thin films between fully amorphous and fully crystalline states, which restricts device functionality and confines design flexibility and programmability. In this work, we present a novel approach that leverages pixel-level control of PCM in inverse-designed photonic devices, enabling highly reconfigurable, multi-functional operations. We integrate low-loss Sb2Se3 onto a multi-mode interferometer (MMI) and achieve precise, localized phase manipulation through direct laser writing. This technique allows for flexible programming of the photonic device by adjusting the PCM phase pattern rather than relying on global phase states, thereby enhancing device adaptability. As a proof of concept, we programmed the device as a wavelength-division multiplexer and subsequently reconfigured it into a mode-division multiplexer. Our results underscore the potential of combining inverse design with pixel-wise tuning for next-generation programmable phase-change photonic systems.

physics.optics↗

arXiv2024

Microheater hotspot engineering for repeatable multi-level switching in foundry-processed phase change silicon photonics

Nonvolatile photonic integrated circuits employing phase change materials have relied either on optical switching mechanisms with precise multi-level control but poor scalability or electrical switching with seamless integration and scalability but mostly limited to a binary response. Recent works have demonstrated electrical multi-level switching; however, they relied on the stochastic nucleation process to achieve partial crystallization with low demonstrated repeatability and cyclability. Here, we re-engineer waveguide-integrated microheaters to achieve precise spatial control of the temperature profile (i.e., hotspot) and, thus, switch deterministic areas of an embedded phase change material cell. We experimentally demonstrate this concept using a variety of foundry-processed doped-silicon microheaters on a silicon-on-insulator platform to trigger multi-step amorphization and reversible switching of Sb$_{2}$Se$_{3}$ and Ge$_{2}$Sb$_{2}$Se$_{4}$Te alloys. We further characterize the response of our microheaters using Transient Thermoreflectance Imaging. Our approach combines the deterministic control resulting from a spatially resolved glassy-crystalline distribution with the scalability of electro-thermal switching devices, thus paving the way to reliable multi-level switching towards robust reprogrammable phase-change photonic devices for analog processing and computing.

physics.app-ph↗

arXiv2023

Freeform Direct-write and Rewritable Photonic Integrated Circuits in Phase-Change Thin Films

Photonic integrated circuits (PICs) with rapid prototyping and reprogramming capabilities promise revolutionary impacts on a plethora of photonic technologies. Here, we report direct-write and rewritable photonic circuits on a low-loss phase change material (PCM) thin film. Complete end-to-end PICs are directly laser written in one step without additional fabrication processes, and any part of the circuit can be erased and rewritten, facilitating rapid design modification. We demonstrate the versatility of this technique for diverse applications, including an optical interconnect fabric for reconfigurable networking, a photonic crossbar array for optical computing, and a tunable optical filter for optical signal processing. By combining the programmability of the direct laser writing technique with PCM, our technique unlocks opportunities for programmable photonic networking, computing, and signal processing. Moreover, the rewritable photonic circuits enable rapid prototyping and testing in a convenient and cost-efficient manner, eliminate the need for nanofabrication facilities, and thus promote the proliferation of photonics research and education to a broader community.

physics.optics↗

arXiv2023

Nonvolatile Tuning of Bragg Structures Using Transparent Phase-Change Materials

Bragg gratings offer high-performance filtering and routing of light on-chip through a periodic modulation of a waveguide's effective refractive index. Here, we model and experimentally demonstrate the use of Sb2Se3, a nonvolatile and transparent phase-change material, to tune the resonance conditions in two devices which leverage periodic Bragg gratings: a stopband filter and Fabry-Perot cavity. Through simulations, we show that similar refractive indices between silicon and amorphous Sb2Se3 can be used to induce broadband transparency, while the crystalline state can enhance the index contrast in these Bragg devices. Our experimental results show the promise and limitations of this design approach and highlight specific fabrication challenges which need to be addressed in future implementations.

physics.optics↗

arXiv2023

Tunable Structural Transmissive Color in Fano-Resonant Optical Coatings Employing Phase-Change Materials

Reversible, nonvolatile, and pronounced refractive index modulation is an unprecedented combination of properties enabled by chalcogenide phase-change materials (PCMs). This combination of properties makes PCMs a fast-growing platform for active, low-energy nanophotonics, including tunability to otherwise passive thin-film optical coatings. Here, we integrate the PCM Sb2Se3 into a novel four-layer thin-film optical coating that exploits photonic Fano resonances to achieve tunable structural colors in both reflection and transmission. We show, contrary to traditional coatings, that Fano-resonant optical coatings (FROCs) allow for achieving transmissive and reflective structures with narrowband peaks at the same resonant wavelength. Moreover, we demonstrate asymmetric optical response in reflection, where Fano resonance and narrow-band filtering are observed depending upon the light incidence side. Finally, we use a multi-objective inverse design via machine learning (ML) to provide a wide range of solution sets with optimized structures while providing information on the performance limitations of the PCM-based FROCs. Adding tunability to the newly introduced Fano-resonant optical coatings opens various applications in spectral and beam splitting, and simultaneous reflective and transmissive displays, diffractive objects, and holograms.

physics.optics↗

arXiv2022

Structural and Magnetic Properties of Pt/Co/Mn-Based Multilayers

Magnetic multilayers are a rich class of materials systems with numerous highly tunable physical parameters that determine both their magnetic and electronic properties. Here we present a comprehensive experimental study of a novel system, Pt/Co/Mn, which extends the group of Pt/Co/X ($\mathrm{X}=$ metal) multilayers that have been investigated thus far. We demonstrate that an increasing Co layer thickness changes the magnetic anisotropy from out-of-plane to in-plane, whereas the deposition of thicker Mn layers leads to a decrease in the saturation magnetization. Temperature-dependent magnetometry measurements reinforce the hypothesis of antiferromagnetic coupling at the Co/Mn interfaces being responsible for the observed Mn thickness dependence of the magnetization reversal. Moreover, magneto-optical imaging experiments indicate systematic changes in magnetic domain patterns as a function of the Co and Mn layer thickness, suggesting the existence of bubble-like domains -- potentially even magnetic skyrmions -- in the case of sufficiently thick Mn layers, which are expected to contribute to a sizeable Dzyaloshinskii-Moriya interaction in the multilayer stacks. We identify Pt/Co/Mn as a highly complex multilayer system with strong potential for further fundamental studies and possible applications.

cond-mat.mtrl-sci↗