Searcharxiv⌕ Search

arXiv subjects

Yichen Zhang

Publications and source records attributed to Yichen Zhang.

At least 217 records · Page 12Linked to original sources

Quantile Regression Under Memory Constraint

This paper studies the inference problem in quantile regression (QR) for a large sample size $n$ but under a limited memory constraint, where the memory can only store a small batch of data of size $m$. A natural method is the naïve divide-and-conquer approach, which splits data into batches of size $m$, computes the local QR estimator for each batch, and then aggregates the estimators via averaging. However, this method only works when $n=o(m^2)$ and is computationally expensive. This paper proposes a computationally efficient method, which only requires an initial QR estimator on a small batch of data and then successively refines the estimator via multiple rounds of aggregations. Theoretically, as long as $n$ grows polynomially in $m$, we establish the asymptotic normality for the obtained estimator and show that our estimator with only a few rounds of aggregations achieves the same efficiency as the QR estimator computed on all the data. Moreover, our result allows the case that the dimensionality $p$ goes to infinity. The proposed method can also be applied to address the QR problem under distributed computing environment (e.g., in a large-scale sensor network) or for real-time streaming data.

stat.ME↗

Provision for Guaranteed Inertial Response in Diesel-Wind Systems via Model Reference Control

Frequency performance has been a crucial issue for islanded microgrids. On the one hand, most distributed energy resources (DER) are converter-interfaced and do not inherently respond to frequency variations. On the other hand, current inertia emulation approach cannot provide guaranteed response. In this paper, a model reference control based inertia emulation strategy is proposed for diesel-wind systems. Desired inertia can be precisely emulated through the proposed strategy. A typical frequency response model with parametric inertia is set to be the reference model. A measurement at a specific location delivers the information about the disturbance acting on the diesel-wind system to the reference model. The objective is for the speed of the diesel generator to track the reference so that the desired inertial response is realized. In addition, polytopic parameter uncertainty will be considered. The control strategy is configured in different ways according to different operating points. The parameters of the reference model are scheduled to ensure adequate frequency response under a pre-defined worst case. The controller is implemented in a nonlinear three-phase diesel-wind system fed microgrid using the Simulink software platform. The results show that exact synthetic inertia can be emulated and adequate frequency response is achieved.

eess.SY↗

Set Theory-Based Safety Supervisory Control for Wind Turbines to Ensure Adequate Frequency Response

Inadequate frequency response can arise due to a high penetration of wind turbine generators (WTGs) and requires a frequency support function to be integrated in the WTG. The appropriate design for these controllers to ensure adequate response has not been investigated thoroughly. In this paper, a safety supervisory control (SSC) is proposed to synthesize the supportive modes in WTGs to guarantee performance. The concept, region of safety (ROS), is stated for safe switching synthesis. An optimization formula is proposed to calculate the largest ROS. By assuming a polynomial structure, the problem can be solved by a sum of squares program. A feasible result will generate a polynomial, the zero sublevel set of which represents the ROS and is employed as the safety supervisor. A decentralized communication architecture is proposed for small-scale systems. Moreover, a scheduling loop is suggested so that the supervisor updates its boundary with respect to the renewable penetration level to be robust with respect to variations in system inertia. The proposed controller is first verified on a single-machine three-phase nonlinear microgrid, and then implemented on the IEEE 39-bus system. Both results indicate that the proposed framework and control configuration can guarantee adequate response without excessive conservativeness.

eess.SY↗

Rotation in the NGC 1333 IRAS 4C Outflow

We report molecular line observations of the NGC 1333 IRAS 4C outflow in the Perseus Molecular Cloud with the Atacama Large Millimeter/Submillimeter Array. The CCH and CS emission reveal an outflow cavity structure with clear signatures of rotation with respect to the outflow axis. The rotation is detected from about 120 au up to about 1400 au above the envelope/disk mid-plane. As the distance to the central source increases, the rotation velocity of the outflow decreases while the outflow radius increases, which gives a flat specific angular momentum distribution along the outflow. The mean specific angular momentum of the outflow is about 100 au km/s. Based on reasonable assumptions on the outward velocity of the outflow and the protostar mass, we estimate the range of outflow launching radii to be 5-15 au. Such a launching radius rules out that this outflow is launched as an X-wind, but rather, it is more consistent to be a slow disk wind launched from relatively large radii on the disk. The radius of the centrifugal barrier is roughly estimated, and the role of the centrifugal barrier in the outflow launching is discussed.

astro-ph.GA↗

The Impact of Feedback in Massive Star Formation. II. Lower Star Formation Efficiency at Lower Metallicity

We conduct a theoretical study of the formation of massive stars over a wide range of metallicities from 1e-5 to 1Zsun and evaluate the star formation efficiencies (SFEs) from prestellar cloud cores taking into account multiple feedback processes. Unlike for simple spherical accretion, in the case of disk accretion feedback processes do not set upper limits on stellar masses. At solar metallicity, launching of magneto-centrifugally-driven outflows is the dominant feedback process to set SFEs, while radiation pressure, which has been regarded to be pivotal, has only minor contribution even in the formation of over-100Msun stars. Photoevaporation becomes significant in over-20Msun star formation at low metallicities of <1e-2Zsun, where dust absorption of ionizing photons is inefficient. We conclude that if initial prestellar core properties are similar, then massive stars are rarer in extremely metal-poor environments of 1e-5 - 1e-3Zsun. Our results give new insight into the high-mass end of the initial mass function and its potential variation with galactic and cosmological environments.

astro-ph.SR↗

Synthesizing Distributed Energy Resources in Microgrids with Temporal Logic Specifications

Grid supportive (GS) modes integrated within distributed energy resources (DERs) can improve the frequency response. However, synthesis of GS modes for guaranteed performance is challenging. Moreover, a tool is needed to handle sophisticated specifications from grid codes and protection relays. This paper proposes a model predictive control (MPC)-based mode synthesis methodology, which can accommodate the temporal logic specifications (TLSs). The TLSs allow richer descriptions of control specifications addressing both magnitude and time at the same time. The proposed controller will compute a series of Boolean control signals to synthesize the GS mode of DERs by solving the MPC problem under the normal condition, where the frequency response predicted by a reduced-order model satisfies the defined specifications. Once a sizable disturbance is detected, the pre-calculated signals are applied to the DERs. The proposed synthesis methodology is verified on the full nonlinear model in Simulink. A robust factor is imposed on the specifications to compensate the response mismatch between the reduce-order model and nonlinear model so that the nonlinear response satisfies the required TLS.

eess.SY↗

Chemical survey toward young stellar objects in the Perseus molecular cloud complex

Chemical diversity of the gas in low-mass protostellar cores is widely recognized. In order to explore its origin, a survey of chemical composition toward 36 Class 0/I protostars in the Perseus molecular cloud complex, which are selected in an unbiased way under certain physical conditions, has been conducted with IRAM 30 m and NRO 45 m telescope. Multiple lines of C2H, c-C3H2 and CH3OH have been observed to characterize the chemical composition averaged over a 1000 au scale around the protostar. The derived beam-averaged column densities show significant chemical diversity among the sources, where the column density ratios of C2H/CH3OH are spread out by 2 orders of magnitude. From previous studies, the hot corino sources have abundant CH3OH but deficient C2H, their C2H/CH3OH column density ratios being relatively low. In contrast, the warm-carbon-chain chemistry (WCCC) sources are found to reveal the high C2H/CH3OH column density ratios. We find that the majority of the sources have intermediate characters between these two distinct chemistry types. A possible trend is seen between the C2H/CH3OH ratio and the distance of the source from the edge of a molecular cloud. The sources located near cloud edges or in isolated clouds tend to have a high C2H/CH3OH ratio. On the other hand, the sources having a low C2H/CH3OH ratio tend to be located in inner regions of the molecular cloud complex. This result gives an important clue to an understanding of the origin of the chemical diversity of protostellar cores in terms of environmental effects.

astro-ph.GA↗

Battery Energy Storage Scheduling for Optimal Load Variance Minimization

Generation portfolio can be significantly altered due to the deployment of distributed energy resources (DER) in distribution networks and the concept of microgrid. Generally, distribution networks can operate in a more resilient and economic fashion through proper coordination of DER. However, due to the partially uncontrollable and stochastic nature of some DER, the variance of net load of distribution systems increases, which raises the operational cost and complicates operation for transmission companies. This motivates peak shaving and valley filling using energy storage units deployed in distribution systems. This paper aims at theoretical formulation of optimal load variance minimization, where the infinity norm of net load is minimized. Then, the problem is reformulated equivalently as a linear program. A case study is performed with capacity-limited battery energy storage model and the simplified power flow model of a radial distribution network. The influence of capacity limit and deployment location are studied.

eess.SY↗

Performance Guaranteed Inertia Emulation for Diesel-Wind System Feed Microgrid via Model Reference Control

In this paper, a model reference control based inertia emulation strategy is proposed. Desired inertia can be precisely emulated through this control strategy so that guaranteed performance is ensured. A typical frequency response model with parametrical inertia is set to be the reference model. A measurement at a specific location delivers the information of disturbance acting on the diesel-wind system to the reference model. The objective is for the speed of the diesel-wind system to track the reference model. Since active power variation is dominantly governed by mechanical dynamics and modes, only mechanical dynamics and states, i.e., a swing-engine-governor system plus a reduced-order wind turbine generator, are involved in the feedback control design. The controller is implemented in a three-phase diesel-wind system feed microgrid. The results show exact synthetic inertia is emulated, leading to guaranteed performance and safety bounds.

eess.SY↗

Hybrid Controller for Wind Turbine Generators to Ensure Adequate Frequency Response in Power Networks

Converter-interfaced power sources (CIPS) are hybrid control systems as they may switch between multiple operating modes. Due to increasing penetration, the hybrid behavior of CIPS, such as, wind turbine generators (WTG), may have significant impact on power system dynamics. In this paper, the frequency dynamics under inertia emulation and primary support from WTG is studied. A mode switching for WTG to ensure adequate frequency response is proposed. The switching instants are determined by our proposed concept of a region of safety (ROS), which is the initial set of safe trajectories. The barrier certificate methodology is employed to derive a new algorithm to obtain and enlarge the ROS for the given desired safe limits and the worst-case disturbance scenarios. Then critical switching instants and a safe recovery procedure are found. In addition, the emulated inertia and load-damping effect is derived in the time frame of inertia and primary frequency response, respectively. The theoretical results under critical cases are consistent with simulations and can be used as guidance for practical control design.

eess.SY↗

Radiation Transfer of Models of Massive Star Formation. IV. The Model Grid and Spectral Energy Distribution Fitting

We present a continuum radiative transfer model grid for fitting observed spectral energy distributions (SEDs) of massive protostars. The model grid is based on the paradigm of core accretion theory for massive star formation with pre-assembled gravitationally-bound cores as initial conditions. In particular, following the Turbulent Core Model, initial core properties are set primarily by their mass and the pressure of their ambient clump. We then model the evolution of the protostar and its surround structures in a self-consistent way. The model grid contains about 9000 SEDs with 4 free parameters: initial core mass, the mean surface density of the environment, the protostellar mass, and the inclination. The model grid is used to fit observed SEDs via chi^2 minimization, with the foreground extinction additionally estimated. We demonstrate the fitting process and results using the example of massive protostar G35.20- 0.74. Compared with other SED model grids currently used for massive star formation studies, in our model grid, the properties of the protostar and its surrounding structures are more physically connected, which reduces the dimensionality of the parameter spaces and the total number of models. This excludes possible fitting of models that are physically unrealistic or that are not internally self-consistent in the context of the Turbulent Core Model. Thus, this model grid serves not only as a fitting tool to estimate properties of massive protostars, but also as a test of core accretion theory. The SED model grid is publicly released with this paper.

astro-ph.GA↗

Outflow-Confined HII regions. II. The Early Break-Out Phase

In this series of papers, we model the formation and evolution of the photoionized region and its observational signatures during massive star formation. Here we focus on the early break out of the photoionized region into the outflow cavity. Using results of 3-D magnetohydrodynamic-outflow simulations and protostellar evolution calculations, we perform post-processing radiative-transfer. The photoionized region first appears at a protostellar mass of 10Msun in our fiducial model, and is confined to within 10-100AU by the dense inner outflow, similar to some observed very small hypercompact HII regions. Since the ionizing luminosity of the massive protostar increases dramatically as Kelvin-Helmholz (KH) contraction proceeds, the photoionized region breaks out to the entire outflow region in <10,000yr. Accordingly, the radio free-free emission brightens significantly in this stage. In our fiducial model, the radio luminosity at 10 GHz changes from 0.1 mJy kpc2 at m=11Msun to 100 mJy kpc2 at 16Msun, while the infrared luminosity increases by less than a factor of two. The radio spectral index also changes in the break-out phase from the optically thick value of 2 to the partially optically thin value of 0.6. Additionally, we demonstrate that short-timescale variation in free-free flux would be induced by an accretion burst. The outflow density is enhanced in the accretion burst phase, which leads to a smaller ionized region and weaker free-free emission. The radio luminosity may decrease by one order of magnitude during such bursts, while the infrared luminosity is much less affected, since internal protostellar luminosity dominates over accretion luminosity after KH contraction starts. Such variability may be observable on timescales as short 10-100 yr, if accretion bursts are driven by disk instabilities.

astro-ph.SR↗

The SOFIA Massive (SOMA) Star Formation Survey. I. Overview and First Results

We present an overview and first results of the Stratospheric Observatory For Infrared Astronomy Massive (SOMA) Star Formation Survey, which is using the FORCAST instrument to image massive protostars from $\sim10$--$40\:\rmμ\rm{m}$. These wavelengths trace thermal emission from warm dust, which in Core Accretion models mainly emerges from the inner regions of protostellar outflow cavities. Dust in dense core envelopes also imprints characteristic extinction patterns at these wavelengths, causing intensity peaks to shift along the outflow axis and profiles to become more symmetric at longer wavelengths. We present observational results for the first eight protostars in the survey, i.e., multiwavelength images, including some ancillary ground-based MIR observations and archival {\it{Spitzer}} and {\it{Herschel}} data. These images generally show extended MIR/FIR emission along directions consistent with those of known outflows and with shorter wavelength peak flux positions displaced from the protostar along the blueshifted, near-facing sides, thus confirming qualitative predictions of Core Accretion models. We then compile spectral energy distributions and use these to derive protostellar properties by fitting theoretical radiative transfer models. Zhang and Tan models, based on the Turbulent Core Model of McKee and Tan, imply the sources have protostellar masses $m_*\sim10$--50$\:M_\odot$ accreting at $\sim10^{-4}$--$10^{-3}\:M_\odot\:{\rm{yr}}^{-1}$ inside cores of initial masses $M_c\sim30$--500$\:M_\odot$ embedded in clumps with mass surface densities $Σ_{\rm{cl}}\sim0.1$--3$\:{\rm{g\:cm}^{-2}}$. Fitting Robitaille et al. models typically leads to slightly higher protostellar masses, but with disk accretion rates $\sim100\times$ smaller. We discuss reasons for these differences and overall implications of these first survey results for massive star formation theories.

astro-ph.GA↗

The Impact of Feedback During Massive Star Formation by Core Accretion

We study feedback during massive star formation using semi-analytic methods, considering the effects of disk winds, radiation pressure, photoevaporation and stellar winds, while following protostellar evolution in collapsing massive gas cores. We find that disk winds are the dominant feedback mechanism setting star formation efficiencies (SFEs) from initial cores of ~0.3-0.5. However, radiation pressure is also significant to widen the outflow cavity causing reductions of SFE compared to the disk-wind only case, especially for >100Msun star formation at clump mass surface densities Sigma<0.3g/cm2. Photoevaporation is of relatively minor importance due to dust attenuation of ionizing photons. Stellar winds have even smaller effects during the accretion stage. For core masses Mc~10-1000Msun and Sigma~0.1-3g/cm2, we find the overall SFE to be 0.31(Rc/0.1pc)^{-0.39}, potentially a useful sub-grid star-formation model in simulations that can resolve pre-stellar core radii, Rc=0.057(Mc/60Msun)^{1/2}(Sigma/g/cm2)^{-1/2}pc. The decline of SFE with Mc is gradual with no evidence for a maximum stellar-mass set by feedback processes up to stellar masses of ~300Msun. We thus conclude that the observed truncation of the high-mass end of the IMF is shaped mostly by the pre-stellar core mass function or internal stellar processes. To form massive stars with the observed maximum masses of ~150-300Msun, initial core masses need to be >500-1000Msun. We also apply our feedback model to zero-metallicity primordial star formation, showing that, in the absence of dust, photoevaporation staunches accretion at ~50Msun. Our model implies radiative feedback is most significant at metallicities ~10^{-2}Zsun, since both radiation pressure and photoevaporation are effective in this regime.

astro-ph.SR↗

Emulated Inertia and Damping of Converter-Interfaced Power Source

Converter-interfaced power sources (CIPSs), like wind turbine and energy storage, can be switched to the inertia emulation mode when the detected frequency deviation exceeds a pre-designed threshold, i.e. dead band, to support the frequency response of a power grid. This letter proposes an approach to derive the emulated inertia and damping from a CIPS based on the linearized model of the CIPS and the power grid, where the grid is represented by an equivalent single machine. The emulated inertia and damping can be explicitly expressed in time and turn out to be time-dependent.

eess.SY↗

ALMA Cycle 1 Observations of the HH46/47 Molecular Outflow: Structure, Entrainment and Core Impact

We present ALMA Cycle 1 observations of the HH46/47 molecular outflow using combined 12m array and ACA observations. The improved angular resolution and sensitivity of our multi-line maps reveal structures that help us study the entrainment process in much more detail and allow us to obtain more precise estimates of outflow properties than previous observations. We use 13CO(1-0) and C18O(1-0) emission to correct for the 12CO(1-0) optical depth to accurately estimate the outflow mass, momentum and kinetic energy. This correction increases the estimates of the mass, momentum and kinetic energy by factors of about 9, 5 and 2, respectively, with respect to estimates assuming optically thin emission. The new 13CO and C18O data also allow us to trace denser and slower outflow material than that traced by the 12CO maps, and they reveal an outflow cavity wall at very low velocities (as low as 0.2km/s with respect to the cores central velocity). Adding with the slower material traced only by 13CO and C18O, there is another factor of 3 increase in the mass estimate and 50% increase in the momentum estimate. The estimated outflow properties indicate that the outflow is capable of dispersing the parent core within the typical lifetime of the embedded phase of a low-mass protostar, and that it is responsible for a core-to-star efficiency of 1/4 to 1/3. We find that the outflow cavity wall is composed of multiple shells associated with a series of jet bow-shock events. Within about 3000AU of the protostar the 13CO and C18O emission trace a circumstellar envelope with both rotation and infall motions, which we compare with a simple analytic model. The CS(2-1) emission reveals tentative evidence of a slowly-moving rotating outflow, which we suggest is entrained not only poloidally but also toroidally by a disk wind that is launched from relatively large radii from the source.

astro-ph.SR↗

An Ordered Bipolar Outflow from a Massive Early-Stage Core

We present ALMA follow-up observations of two massive, early-stage core candidates, C1-N & C1-S, in Infrared Dark Cloud (IRDC) G028.37+00.07, which were previously identified by their N2D+(3-2) emission and show high levels of deuteration of this species. The cores are also dark at far infrared wavelengths up to ~100 microns. We detect 12CO(2-1) from a narrow, highly-collimated bipolar outflow that is being launched from near the center of the C1-S core, which is also the location of the peak 1.3mm dust continuum emission. This protostar, C1-Sa, has associated dense gas traced by C18O(2-1) and DCN(3-2), from which we estimate it has a radial velocity that is near the center of the range exhibited by the C1-S massive core. A second outflow-driving source is also detected within the projected boundary of C1-S, but appears to be at a different radial velocity. After considering properties of the outflows, we conclude C1-Sa is a promising candidate for an early-stage massive protostar and as such it shows that these early phases of massive star formation can involve highly ordered outflow, and thus accretion, processes, similar to models developed to explain low-mass protostars.

astro-ph.GA↗

Outflow-Confined H II Regions. I. First Signposts of Massive Star Formation

We present an evolutionary sequence of models of the photoionized disk-wind outflow around forming massive stars based on the Core Accretion model. The outflow is expected to be the first structure to be ionized by the protostar and can confine the expansion of the HII region, especially in lateral directions in the plane of the accretion disk. The ionizing luminosity increases as Kelvin-Helmholz contraction proceeds, and the HII region is formed when the stellar mass reaches ~10-20Msun depending on the initial cloud core properties. Although some part of outer disk surface remains neutral due to shielding by the inner disk and the disk wind, almost the whole of the outflow is ionized in 1e3-1e4 yr after initial HII region formation. Having calculated the extent and temperature structure of the HII region within the immediate protostellar environment, we then make predictions for the strength of its free-free continuum and recombination line emission. The free-free radio emission from the ionized outflow has a flux density of ~(20-200)x(nu/10GHz)^p mJy for a source at a distance of 1 kpc with a spectral index p~0.4-0.7, and the apparent size is typically ~500AU at 10GHz. The H40alpha line profile has a width of about 100km/s. These properties of our model are consistent with observed radio winds and jets around forming massive protostars.

astro-ph.SR↗