Searcharxiv⌕ Search

arXiv subjects

Yifan Tang

Publications and source records attributed to Yifan Tang.

35 records · Page 2Linked to original sources

U-GIFT: Uncertainty-Guided Firewall for Toxic Speech in Few-Shot Scenario

With the widespread use of social media, user-generated content has surged on online platforms. When such content includes hateful, abusive, offensive, or cyberbullying behavior, it is classified as toxic speech, posing a significant threat to the online ecosystem's integrity and safety. While manual content moderation is still prevalent, the overwhelming volume of content and the psychological strain on human moderators underscore the need for automated toxic speech detection. Previously proposed detection methods often rely on large annotated datasets; however, acquiring such datasets is both costly and challenging in practice. To address this issue, we propose an uncertainty-guided firewall for toxic speech in few-shot scenarios, U-GIFT, that utilizes self-training to enhance detection performance even when labeled data is limited. Specifically, U-GIFT combines active learning with Bayesian Neural Networks (BNNs) to automatically identify high-quality samples from unlabeled data, prioritizing the selection of pseudo-labels with higher confidence for training based on uncertainty estimates derived from model predictions. Extensive experiments demonstrate that U-GIFT significantly outperforms competitive baselines in few-shot detection scenarios. In the 5-shot setting, it achieves a 14.92\% performance improvement over the basic model. Importantly, U-GIFT is user-friendly and adaptable to various pre-trained language models (PLMs). It also exhibits robust performance in scenarios with sample imbalance and cross-domain settings, while showcasing strong generalization across various language applications. We believe that U-GIFT provides an efficient solution for few-shot toxic speech detection, offering substantial support for automated content moderation in cyberspace, thereby acting as a firewall to promote advancements in cybersecurity.

cs.SD↗

State-of-the-art Advances of Deep-learning Linguistic Steganalysis Research

With the evolution of generative linguistic steganography techniques, conventional steganalysis falls short in robustly quantifying the alterations induced by steganography, thereby complicating detection. Consequently, the research paradigm has pivoted towards deep-learning-based linguistic steganalysis. This study offers a comprehensive review of existing contributions and evaluates prevailing developmental trajectories. Specifically, we first provided a formalized exposition of the general formulas for linguistic steganalysis, while comparing the differences between this field and the domain of text classification. Subsequently, we classified the existing work into two levels based on vector space mapping and feature extraction models, thereby comparing the research motivations, model advantages, and other details. A comparative analysis of the experiments is conducted to assess the performances. Finally, the challenges faced by this field are discussed, and several directions for future development and key issues that urgently need to be addressed are proposed.

cs.CL↗

Mobile Robot Oriented Large-Scale Indoor Dataset for Dynamic Scene Understanding

Most existing robotic datasets capture static scene data and thus are limited in evaluating robots' dynamic performance. To address this, we present a mobile robot oriented large-scale indoor dataset, denoted as THUD (Tsinghua University Dynamic) robotic dataset, for training and evaluating their dynamic scene understanding algorithms. Specifically, the THUD dataset construction is first detailed, including organization, acquisition, and annotation methods. It comprises both real-world and synthetic data, collected with a real robot platform and a physical simulation platform, respectively. Our current dataset includes 13 larges-scale dynamic scenarios, 90K image frames, 20M 2D/3D bounding boxes of static and dynamic objects, camera poses, and IMU. The dataset is still continuously expanding. Then, the performance of mainstream indoor scene understanding tasks, e.g. 3D object detection, semantic segmentation, and robot relocalization, is evaluated on our THUD dataset. These experiments reveal serious challenges for some robot scene understanding tasks in dynamic scenes. By sharing this dataset, we aim to foster and iterate new mobile robot algorithms quickly for robot actual working dynamic environment, i.e. complex crowded dynamic scenes.

cs.RO↗

Linguistic Steganalysis via LLMs: Two Modes for Efficient Detection of Strongly Concealed Stego

To detect stego (steganographic text) in complex scenarios, linguistic steganalysis (LS) with various motivations has been proposed and achieved excellent performance. However, with the development of generative steganography, some stegos have strong concealment, especially after the emergence of LLMs-based steganography, the existing LS has low detection or cannot detect them. We designed a novel LS with two modes called LSGC. In the generation mode, we created an LS-task "description" and used the generation ability of LLM to explain whether texts to be detected are stegos. On this basis, we rethought the principle of LS and LLMs, and proposed the classification mode. In this mode, LSGC deleted the LS-task "description" and used the "causalLM" LLMs to extract steganographic features. The LS features can be extracted by only one pass of the model, and a linear layer with initialization weights is added to obtain the classification probability. Experiments on strongly concealed stegos show that LSGC significantly improves detection and reaches SOTA performance. Additionally, LSGC in classification mode greatly reduces training time while maintaining high performance.

cs.CL↗

UP4LS: User Profile Constructed by Multiple Attributes for Enhancing Linguistic Steganalysis

Linguistic steganalysis (LS) tasks aim to detect whether a text contains secret information. Existing LS methods focus on the deep-learning model design and they achieve excellent results in ideal data. However, they overlook the unique user characteristics, leading to weak performance in social networks. And a few stegos here that further complicate detection. We propose the UP4LS, a framework with the User Profile for enhancing LS in realistic scenarios. Three kinds of user attributes like writing habits are explored to build the profile. For each attribute, the specific feature extraction module is designed. The extracted features are mapped to high-dimensional user features via the deep-learning model of the method to be improved. The content feature is extracted by the language model. Then user and content features are integrated. Existing methods can improve LS results by adding the UP4LS framework without changing their deep-learning models. Experiments show that UP4LS can significantly enhance the performance of LS-task baselines in realistic scenarios, with the overall Acc increased by 25%, F1 increased by 51%, and SOTA results. The improvement is especially pronounced in fewer stegos. Additionally, UP4LS also sets the stage for the related-task SOTA methods to efficient LS.

cs.CL↗

Selecting Subsets of Source Data for Transfer Learning with Applications in Metal Additive Manufacturing

Considering data insufficiency in metal additive manufacturing (AM), transfer learning (TL) has been adopted to extract knowledge from source domains (e.g., completed printings) to improve the modeling performance in target domains (e.g., new printings). Current applications use all accessible source data directly in TL with no regard to the similarity between source and target data. This paper proposes a systematic method to find appropriate subsets of source data based on similarities between the source and target datasets for a given set of limited target domain data. Such similarity is characterized by the spatial and model distance metrics. A Pareto frontier-based source data selection method is developed, where the source data located on the Pareto frontier defined by two similarity distance metrics are selected iteratively. The method is integrated into an instance-based TL method (decision tree regression model) and a model-based TL method (fine-tuned artificial neural network). Both models are then tested on several regression tasks in metal AM. Comparison results demonstrate that 1) the source data selection method is general and supports integration with various TL methods and distance metrics, 2) compared with using all source data, the proposed method can find a small subset of source data from the same domain with better TL performance in metal AM regression tasks involving different processes and machines, and 3) when multiple source domains exist, the source data selection method could find the subset from one source domain to obtain comparable or better TL performance than the model constructed using data from all source domains.

cs.LG↗

Real-Time 2D Temperature Field Prediction in Metal Additive Manufacturing Using Physics-Informed Neural Networks

Accurately predicting the temperature field in metal additive manufacturing (AM) processes is critical to preventing overheating, adjusting process parameters, and ensuring process stability. While physics-based computational models offer precision, they are often time-consuming and unsuitable for real-time predictions and online control in iterative design scenarios. Conversely, machine learning models rely heavily on high-quality datasets, which can be costly and challenging to obtain within the metal AM domain. Our work addresses this by introducing a physics-informed neural network framework specifically designed for temperature field prediction in metal AM. This framework incorporates a physics-informed input, physics-informed loss function, and a Convolutional Long Short-Term Memory (ConvLSTM) architecture. Utilizing real-time temperature data from the process, our model predicts 2D temperature fields for future timestamps across diverse geometries, deposition patterns, and process parameters. We validate the proposed framework in two scenarios: full-field temperature prediction for a thin wall and 2D temperature field prediction for cylinder and cubic parts, demonstrating errors below 3% and 1%, respectively. Our proposed framework exhibits the flexibility to be applied across diverse scenarios with varying process parameters, geometries, and deposition patterns.

cs.LG↗

Robust Estimation of Nonlinear Properties of Quantum Processes

Accurate and robust estimation of quantum process properties is crucial for quantum information processing and quantum many-body physics. Combining classical shadow tomography and randomized benchmarking, Helsen et al. introduced a method to estimate the linear properties of quantum processes. In this work, we focus on the estimation protocols of nonlinear process properties that are robust to state preparation and measurement errors. We introduce two protocols, both utilizing random gate sequences but employing different post-processing methods, which make them suitable for measuring different nonlinear properties. The first protocol offers a robust and sound method to estimate the out-of-time-ordered correlation, as demonstrated numerically in an Ising model. The second protocol estimates unitarity, effectively characterizing the incoherence of quantum channels. We expect the two protocols to be useful tools for exploring quantum many-body physics and characterizing quantum processes.

quant-ph↗

Online Two-stage Thermal History Prediction Method for Metal Additive Manufacturing of Thin Walls

This paper aims to propose an online two-stage thermal history prediction method, which could be integrated into a metal AM process for performance control. Based on the similarity of temperature curves (curve segments of a temperature profile of one point) between any two successive layers, the first stage of the proposed method designs a layer-to-layer prediction model to estimate the temperature curves of the yet-to-print layer from measured temperatures of certain points on the previously printed layer. With measured/predicted temperature profiles of several points on the same layer, the second stage proposes a reduced order model (ROM) (intra-layer prediction model) to decompose and construct the temperature profiles of all points on the same layer, which could be used to build the temperature field of the entire layer. The training of ROM is performed with an extreme learning machine (ELM) for computational efficiency. Fifteen wire arc AM experiments and nine simulations are designed for thin walls with a fixed length and unidirectional printing of each layer. The test results indicate that the proposed prediction method could construct the thermal history of a yet-to-print layer within 0.1 seconds on a low-cost desktop computer. Meanwhile, the method has acceptable generalization capability in most cases from lower layers to higher layers in the same simulation, as well as from one simulation to a new simulation on different AM process parameters. More importantly, after fine-tuning the proposed method with limited experimental data, the relative errors of all predicted temperature profiles on a new experiment are smaller than 0.09, which demonstrates the applicability and generalization of the proposed two-stage thermal history prediction method in online applications for metal AM.

cs.LG↗

System identification and closed-loop control of laser hot-wire directed energy deposition using the parameter-signature-property modeling scheme

Hot-wire directed energy deposition using a laser beam (DED-LB/w) is a method of metal additive manufacturing (AM) that has benefits of high material utilization and deposition rate, but parts manufactured by DED-LB/w suffer from a substantial heat input and undesired surface finish. Hence, monitoring and controlling the process parameters and signatures during the deposition is crucial to ensure the quality of final part properties and geometries. This paper explores the dynamic modeling of the DED-LB/w process and introduces a parameter-signature-property modeling and control approach to enhance the quality of modeling and control of part properties that cannot be measured in situ. The study investigates different process parameters that influence the melt pool width (signature) and bead width (property) in single and multi-layer beads. The proposed modeling approach utilizes a parameter-signature model as F_1 and a signature-property model as F_2. Linear and nonlinear modeling approaches are compared to describe a dynamic relationship between process parameters and a process signature, the melt pool width (F_1). A fully connected artificial neural network is employed to model and predict the final part property, i.e., bead width, based on melt pool signatures (F_2). Finally, the effectiveness and usefulness of the proposed parameter-signature-property modeling is tested and verified by integrating the parameter-signature (F_1) and signature-property (F_2) models in the closed-loop control of the width of the part. Compared with the control loop with only F_1, the proposed method shows clear advantages and bears potential to be applied to control other part properties that cannot be directly measured or monitored in situ.

eess.SY↗

Comparison of Transfer Learning based Additive Manufacturing Models via A Case Study

Transfer learning (TL) based additive manufacturing (AM) modeling is an emerging field to reuse the data from historical products and mitigate the data insufficiency in modeling new products. Although some trials have been conducted recently, the inherent challenges of applying TL in AM modeling are seldom discussed, e.g., which source domain to use, how much target data is needed, and whether to apply data preprocessing techniques. This paper aims to answer those questions through a case study defined based on an open-source dataset about metal AM products. In the case study, five TL methods are integrated with decision tree regression (DTR) and artificial neural network (ANN) to construct six TL-based models, whose performances are then compared with the baseline DTR and ANN in a proposed validation framework. The comparisons are used to quantify the performance of applied TL methods and are discussed from the perspective of similarity, training data size, and data preprocessing. Finally, the source AM domain with larger qualitative similarity and a certain range of target-to-source training data size ratio are recommended. Besides, the data preprocessing should be performed carefully to balance the modeling performance and the performance improvement due to TL.

cs.LG↗

Detecting entanglement in quantum many-body systems via permutation moments

Multipartite entanglement plays an essential role in both quantum information science and many-body physics. Due to the exponentially large dimension and complex geometric structure of the state space, the detection of entanglement in many-body systems is extremely challenging in reality. Conventional means, like entanglement witness and entropy criterion, either highly depend on the prior knowledge of the studied systems or the detection capability is relatively weak. In this work, we propose a framework for designing multipartite entanglement criteria based on permutation moments, which have an effective implementation with either the generalized control-SWAP quantum circuits or the random unitary techniques. These criteria show strong detection capability in the multi-qubit Ising model with a long-range $XY$ Hamiltonian. The quantities associated with these criteria have clear physical meaning and can be used as entanglement quantifiers, with which we show the entanglement scaling transition in a quantum dynamical phase transition. Furthermore, our framework can also be generalized to detect the much more complicated entanglement structure in quantum many-body systems.

quant-ph↗

Pricing Multi-event Triggered Catastrophe Bonds Based on Copula-POT Model

The constantly expanding frequency and loss affected by natural disasters pose a severe challenge to the traditional catastrophe insurance market. This paper aims to develop an innovative framework of pricing catastrophic bonds triggered by multiple events with extreme dependence structure. Given the low contingency of the bond's cash flows and high return, the multiple-event CAT bond may successfully transfer the catastrophe risk to the big financial markets meeting the diversification of capital allocations for most potential investors. The designed hybrid trigger mechanism helps reduce moral hazard and improve bond attractiveness with CIR stochastic rate, displaying the co-movement of the wiped-off coupon, payout principal, the occurrence and intensity of the natural disaster involved. As different triggered indexes of multiple-event catastrophic bonds are heavy-tailed with a variety of dependence relationship, nested Archimedean copulas are introduced with marginal distributions modeled by POT-GP distribution for excess data and common parametric models for moderate risks. To illustrate our theoretical pricing framework, we consider a three-event rainstorm CAT bond triggered by catastrophic property losses, in China during 2006--2020. Monte Carlo simulations are conducted for the sensitivity analysis of the rainstorm CAT bond price is also in trigger attachment levels, maturity date, catastrophe intensity, and numbers of trigger indicators.

stat.AP↗

Studying the Impact of Data Disclosure Mechanism in Recommender Systems via Simulation

Recently, privacy issues in web services that rely on users' personal data have raised great attention. Unlike existing privacy-preserving technologies such as federated learning and differential privacy, we explore another way to mitigate users' privacy concerns, giving them control over their own data. For this goal, we propose a privacy aware recommendation framework that gives users delicate control over their personal data, including implicit behaviors, e.g., clicks and watches. In this new framework, users can proactively control which data to disclose based on the trade-off between anticipated privacy risks and potential utilities. Then we study users' privacy decision making under different data disclosure mechanisms and recommendation models, and how their data disclosure decisions affect the recommender system's performance. To avoid the high cost of real-world experiments, we apply simulations to study the effects of our proposed framework. Specifically, we propose a reinforcement learning algorithm to simulate users' decisions (with various sensitivities) under three proposed platform mechanisms on two datasets with three representative recommendation models. The simulation results show that the platform mechanisms with finer split granularity and more unrestrained disclosure strategy can bring better results for both end users and platforms than the "all or nothing" binary mechanism adopted by most real-world applications. It also shows that our proposed framework can effectively protect users' privacy since they can obtain comparable or even better results with much less disclosed data.

cs.IR↗

Efficient entanglement generation and detection of generalized stabilizer states

The generation and verification of large-scale entanglement are essential to the development of quantum technologies. In this paper, we present an efficient scheme to generate genuine multipartite entanglement of a large number of qubits by using the Heisenberg interaction. This method can be conveniently implemented in various physical platforms, including superconducting, trapped-ion, and cold-atom systems. In order to characterize the entanglement of the output quantum state, we generalize the stabilizer formalism and develop an entanglement witness method. In particular, we design a generic searching algorithm to optimize entanglement witness with a minimal number of measurement settings under a given noise level. From the perspective of practical applications, we numerically study the trade-off between the experiment efficiency and the detection robustness.

quant-ph↗

Electric Vehicle Battery Remaining Charging Time Estimation Considering Charging Accuracy and Charging Profile Prediction

Electric vehicles (EVs) have been growing rapidly in popularity in recent years and have become a future trend. It is an important aspect of user experience to know the Remaining Charging Time (RCT) of an EV with confidence. However, it is difficult to find an algorithm that accurately estimates the RCT for vehicles in the current EV market. The maximum RCT estimation error of the Tesla Model X can be as high as 60 minutes from a 10 % to 99 % state-of-charge (SOC) while charging at direct current (DC). A highly accurate RCT estimation algorithm for electric vehicles is in high demand and will continue to be as EVs become more popular. There are currently two challenges to arriving at an accurate RCT estimate. First, most commercial chargers cannot provide requested charging currents during a constant current (CC) stage. Second, it is hard to predict the charging current profile in a constant voltage (CV) stage. To address the first issue, this study proposes an RCT algorithm that updates the charging accuracy online in the CC stage by considering the confidence interval between the historical charging accuracy and real-time charging accuracy data. To solve the second issue, this study proposes a battery resistance prediction model to predict charging current profiles in the CV stage, using a Radial Basis Function (RBF) neural network (NN). The test results demonstrate that the RCT algorithm proposed in this study achieves an error rate improvement of 73.6 % and 84.4 % over the traditional method in the CC and CV stages, respectively.

eess.SY↗

Privacy-Preserving Pose Estimation for Human-Robot Interaction

Pose estimation is an important technique for nonverbal human-robot interaction. That said, the presence of a camera in a person's space raises privacy concerns and could lead to distrust of the robot. In this paper, we propose a privacy-preserving camera-based pose estimation method. The proposed system consists of a user-controlled translucent filter that covers the camera and an image enhancement module designed to facilitate pose estimation from the filtered (shadow) images, while never capturing clear images of the user. We evaluate the system's performance on a new filtered image dataset, considering the effects of distance from the camera, background clutter, and film thickness. Based on our findings, we conclude that our system can protect humans' privacy while detecting humans' pose information effectively.

cs.RO↗