arXiv subjects

Yijie Mao

Publications and source records attributed to Yijie Mao.

At least 37 records · Page 2Linked to original sources

arXiv2025

RIS-Assisted Passive Localization (RAPL): An Efficient Zero-Overhead Framework Using Conditional Sample Mean

Reconfigurable Intelligent Surface (RIS) has been recognized as a promising solution for enhancing localization accuracy. Traditional RIS-based localization methods typically rely on prior channel knowledge, beam scanning, and pilot-based assistance. These approaches often result in substantial energy and computational overhead, and require real-time coordination between the base station (BS) and the RIS. To address these challenges, in this work, we move beyond conventional methods and introduce a novel data-driven, multiple RISs-assisted passive localization approach (RAPL). The proposed method includes two stages, the angle-of-directions (AoDs) between the RISs and the user is estimated by using the conditional sample mean in the first stage, and then the user's position is determined based on the estimated multiple AoD pairs in the second stage. This approach only utilizes the existing communication signals between the user and the BS, relying solely on the measurement of received signal power at each BS antenna for a set of randomly generated phase shifts across all RISs. Moreover, by obviating the need for real-time RIS phase shift optimization or user-to-BS pilot transmissions, the method introduces no additional communication overhead, making it highly suitable for deployment in real-world networks. The proposed scheme is then extended to multi-RIS scenarios considering both parallel and cascaded RIS topologies. Numerical results show that the proposed RAPL improves localization accuracy while significantly reducing energy and signaling overhead compared to conventional methods.

eess.SP↗

arXiv2025

RIS-Assisted Localization: A Novel Conditional Sample Mean Approach without CSI

Reconfigurable intelligent surface (RIS) has been recognized as a promising solution for enhancing localization accuracy. Traditional RIS-based localization methods typically rely on prior channel knowledge, beam scanning, and pilot-based assistance. These approaches often result in substantial energy and computational overhead, and require real-time coordination between the base station (BS) and the RIS. In this work, we propose a novel multiple RISs aided localization approach to address these challenges. The proposed method first estimates the angle-of-directions (AoDs) between the RISs and the user using the conditional sample mean approach, and then uses the estimated multiple AoD pairs to determine the user's position. This approach only requires measuring the received signal strength at the BS for a set of randomly generated phase shifts across all RISs, thereby eliminating the need for real-time RIS phase shift design or user-to-BS pilot transmissions. Numerical results show that the proposed localization approach improves localization accuracy while significantly reducing energy and signaling overhead compared to conventional methods.

eess.SP↗

arXiv2025

Rate Splitting Multiple Access for Simultaneous Lightwave Information and Power Transfer

This paper initiate the application of rate splitting multiple access (RSMA) for simultaneous lightwave information and power transfer (SLIPT), where users require to decode information and harvest energy. We focus on a time-splitting (TS) mode where information decoding and energy harvesting are separated in two different phases. Based on the proposed system model, we design a constrained-concave-convex programming (CCCP) algorithm to solve the optimization problem of maximizing the worst-case rate among users subject to the harvested energy constraint at each user. Specifically, the proposed algorithm exploits transformation of the bilinear function, semidefinite relaxation (SDR), CCCP, and a penalty method to effectively deal with the non-convex constraints and objective function. Numerical results show that our proposed RSMA-aided SLIPT outperforms the existing baselines based on space-division multiple access (SDMA) and non-orthogonal multiple access (NOMA).

eess.SP↗

arXiv2025

Joint Active and Passive Beamforming Optimization for Beyond Diagonal RIS-aided Multi-User Communications

Benefiting from its capability to generalize existing reconfigurable intelligent surface (RIS) architectures and provide additional design flexibility via interactions between RIS elements, beyond-diagonal RIS (BD-RIS) has attracted considerable research interests recently. However, due to the symmetric and unitary passive beamforming constraint imposed on BD-RIS, existing joint active and passive beamforming optimization algorithms for BD-RIS either exhibit high computational complexity to achieve near optimal solutions or rely on heuristic algorithms with substantial performance loss. In this paper, we address this issue by proposing an efficient optimization framework for BD-RIS assisted multi-user multi-antenna communication networks. Specifically, we solve the weighted sum rate maximization problem by introducing a novel beamforming optimization algorithm that alternately optimizes active and passive beamforming matrices using iterative closed-form solutions. Numerical results demonstrate that our algorithm significantly reduces computational complexity while ensuring a sub-optimal solution.

eess.SP↗

arXiv2024

RIS-aided Wireless-Powered Backscatter Communications for Sustainable Internet of Underground Things

Wireless-powered underground sensor networks (WPUSNs), which enable wireless energy transfer to sensors located underground, is a promising approach for establishing sustainable internet of underground things (IoUT). To support urgent information transmission and improve resource utilization within WPUSNs, backscatter communication (BC) is introduced, resulting in what is known as wireless-powered backscatter underground sensor networks (WPBUSNs). Nevertheless, the performance of WPBUSNs is significantly limited by severe channel impairments caused by the underground soil and the blockage of direct links. To overcome this challenge, in this work, we propose integrating reconfigurable intelligent surface (RIS) with WPBUSNs, leading to the development of RIS-aided WPBUSNs. We begin by reviewing the recent advancements in BC-WPUSNs and RIS. Then, we propose a general architecture of RIS-aided WPBUSNs across various IoUT scenarios, and discuss its advantages and implementation challenges. To illustrate the effectiveness of RIS-aided WPBUSNs, we focus on a realistic farming case study, demonstrating that our proposed framework outperforms the three benchmarks in terms of the sum throughput. Finally, we discuss the open challenges and future research directions for translating this study into practical IoUT applications.

cs.NI↗

arXiv2024

Joint Beam Scheduling and Resource Allocation for Flexible RSMA-aided Near-Field Communications

Supporting immense throughput and ubiquitous connectivity holds paramount importance for future wireless networks. To this end, this letter focuses on how the spatial beams configured for legacy near-field (NF) users can be leveraged to serve extra NF or far-field users while ensuring the rate requirements of legacy NF users. In particular, a flexible rate splitting multiple access (RSMA) scheme is proposed to efficiently manage interference, which carefully selects a subset of legacy users to decode the common stream. Beam scheduling, power allocation, common rate allocation, and user selection are jointly optimized to maximize the sum rate of additional users. To solve the formulated discrete non-convex problem, it is split into three subproblems. The accelerated bisection searching, quadratic transform, and simulated annealing approaches are developed to attack them. Simulation results reveal that the proposed transmit scheme and algorithm achieve significant gains over three competing benchmarks.

cs.IT↗

arXiv2024

Robust Max-Min Fair Beamforming Design for Rate Splitting Multiple Access-aided Visible Light Communications

This paper addresses the robust beamforming design for rate splitting multiple access (RSMA)-aided visible light communication (VLC) networks with imperfect channel state information at the transmitter (CSIT). In particular, we first derive the theoretical lower bound for the channel capacity of RSMA-aided VLC networks. Then we investigate the beamforming design to solve the max-min fairness (MMF) problem of RSMA-aided VLC networks under the practical optical power constraint and electrical power constraint while considering the practical imperfect CSIT scenario. To address the problem, we propose a constrained-concave-convex programming (CCCP)-based beamforming design algorithm which exploits semidefinite relaxation (SDR) technique and a penalty method to deal with the rank-one constraint caused by SDR. Numerical results show that the proposed robust beamforming design algorithm for RSMA-aided VLC network achieves a superior performance over the existing ones for space-division multiple access (SDMA) and non-orthogonal multiple access (NOMA).

cs.IT↗

arXiv2024

A Novel Q-stem Connected Architecture for Beyond-Diagonal Reconfigurable Intelligent Surfaces

Beyond-diagonal reconfigurable intelligent surface (BD-RIS) has garnered significant research interest recently due to its ability to generalize existing reconfigurable intelligent surface (RIS) architectures and provide enhanced performance through flexible inter-connection among RIS elements. However, current BD-RIS designs often face challenges related to high circuit complexity and computational complexity, and there is limited study on the trade-off between system performance and circuit complexity. To address these issues, in this work, we propose a novel BD-RIS architecture named Q-stem connected RIS that integrates the characteristics of existing single connected, tree connected, and fully connected BD-RIS, facilitating an effective trade-off between system performance and circuit complexity. Additionally, we propose two algorithms to design the RIS scattering matrix for a Q-stem connected RIS aided multi-user broadcast channels, namely, a low-complexity least squares (LS) algorithm and a suboptimal LS-based quasi-Newton algorithm. Simulations show that the proposed architecture is capable of attaining the sum channel gain achieved by fully connected RIS while reducing the circuit complexity. Moreover, the proposed LS-based quasi-Newton algorithm significantly outperforms the baselines, while the LS algorithm provides comparable performance with a substantial reduction in computational complexity.

cs.IT↗

arXiv2024

Cramér-Rao Bound Based Waveform Optimization for MIMO Radar: An Efficient Linear-Proximal Method

This paper focuses on radar waveform optimization for minimizing the Cramér-Rao bound (CRB) in a multiple-input multiple-output (MIMO) radar system. In contrast to conventional approaches relying on semi-definite programming (SDP) and optimization toolboxes like CVX, we introduce a pioneering and efficient waveform optimization approach in this paper. Our proposed algorithm first applies sequential linear approximation to transform the original CRB-based problem with the transmit power constraint into a sequence of convex subproblems. By introducing a proximal term and further leveraging the Karush-Kuhn-Tucker (KKT) conditions, we derive the optimal closed-form solution for each subproblem. The convergence of the proposed algorithm is then proved rigorously. Numerical results demonstrate that the proposed approach significantly reduces computational complexity -- at least two orders of magnitude lower than the baseline algorithms while maintaining the same radar sensing accuracy.

eess.SP↗

arXiv2024

Green Probabilistic Semantic Communication over Wireless Networks

In this paper, we propose a multi-user green semantic communication system facilitated by a probabilistic knowledge graph (PKG). By integrating probability into the knowledge graph, we enable probabilistic semantic communication (PSC) and represent semantic information accordingly. On this basis, a semantic compression model designed for multi-user downlink task-oriented communication is introduced, utilizing the semantic compression ratio (SCR) as a parameter to connect the computation and communication processes of information transmission. Based on the rate-splitting multiple access (RSMA) technology, we derive mathematical expressions for system transmission energy consumption and related formulations. Subsequently, the multi-user green semantic communication system is modeled and the optimal problem with the goal of minimizing system energy consumption comprehensively considering the computation and communication process under given constrains is formulated. In order to address the optimal problem, we propose an alternating optimization algorithm that tackles sub-problems of power allocation and beamforming design, semantic compression ratio, and computation capacity allocation. Simulation results validate the effectiveness of our approach, demonstrating the superiority of our system over methods using Space Division Multiple Access (SDMA) and non-orthogonal multiple access (NOMA) instead of RSMA, and highlighting the benefits of our PSC compression model.

cs.ET↗

arXiv2024

Rate Splitting Multiple Access: Optimal Beamforming Structure and Efficient Optimization Algorithms

Joint optimization for common rate allocation and beamforming design have been widely studied in rate splitting multiple access (RSMA) empowered multiuser multi-antenna transmission networks. Due to the highly coupled optimization variables and non-convexity of the joint optimization problems, emerging algorithms such as weighted minimum mean square error (WMMSE) and successive convex approximation (SCA) have been applied to RSMA which typically approximate the original problem with a sequence of disciplined convex subproblems and solve each subproblem by an optimization toolbox. While these approaches are capable of finding a viable solution, they are unable to offer a comprehensive understanding of the solution structure and are burdened by high computational complexity. In this work, for the first time, we identify the optimal beamforming structure and common rate allocation for the weighted sum-rate (WSR) maximization problem of RSMA. We then propose a computationally efficient optimization algorithm that jointly optimizes the beamforming and common rate allocation without relying on any toolbox. Specifically, we first approximate the original WSR maximization problem with a sequence of convex subproblems based on fractional programming (FP). Numerical results show that the proposed algorithm achieves the same performance but takes only 0.5\% or less simulation time compared with the state-of-the-art WMMSE, SCA, and FP algorithms. Experimental results show that the proposed two methods have similar mean square error (MSE) performance compared with traditional method using CVX optimization tool, however, computational complexities are greatly reduced. The proposed algorithms pave the way for the practical and efficient optimization algorithm design for RSMA and its applications in 6G.

cs.IT↗

arXiv2024

A Bistatic ISAC Framework for LEO Satellite Systems: A Rate-Splitting Approach

Aiming to achieve ubiquitous global connectivity and target detection on the same platform with improved spectral/energy efficiency and reduced onboard hardware cost, low Earth orbit (LEO) satellite systems capable of simultaneously performing communications and radar have attracted significant attention. Designing such a joint system should address not only the challenges of integrating two functions but also the unique propagation characteristics of the satellites. To overcome severe echo signal path loss due to the high altitude of the satellite, we put forth a bistatic integrated sensing and communication (ISAC) framework with a radar receiver separated from the satellite. For robust and effective interference management, we employ rate-splitting multiple access (RSMA), which splits and encodes users messages into private and common streams. We optimize the dual-functional precoders to maximize the minimum rate among all users while satisfying the Cramer-Rao bound (CRB) constraints. Given the challenge of acquiring instantaneous channel state information (iCSI) for LEO satellites, we exploit the geometrical and statistical characteristics of the satellite channel. To develop an efficient optimization algorithm, semidefinite relaxation (SDR), sequential rank-1 constraint relaxation (SROCR), and successive convex approximation (SCA) are utilized. Numerical results show that the proposed framework efficiently performs both communication and radar, demonstrating superior interference control capabilities. Furthermore, it is validated that the common stream plays three vital roles: i) beamforming towards the radar target, ii) interference management between communications and radar, and iii) interference management among communication users.

cs.IT↗

arXiv2024

RS-BNN: A Deep Learning Framework for the Optimal Beamforming Design of Rate-Splitting Multiple Access

Rate splitting multiple access (RSMA) relies on beamforming design for attaining spectral efficiency and energy efficiency gains over traditional multiple access schemes. While conventional optimization approaches such as weighted minimum mean square error (WMMSE) achieve suboptimal solutions for RSMA beamforming optimization, they are computationally demanding. A novel approach based on fractional programming (FP) has unveiled the optimal beamforming structure (OBS) for RSMA. This method, combined with a hyperplane fixed point iteration (HFPI) approach, named FP-HFPI, provides suboptimal beamforming solutions with identical sum rate performance but much lower computational complexity compared to WMMSE. Inspired by such an approach, in this work, a novel deep unfolding framework based on FP-HFPI, named rate-splitting-beamforming neural network (RS-BNN), is proposed to unfold the FP-HFPI algorithm. Numerical results indicate that the proposed RS-BNN attains a level of performance closely matching that of WMMSE and FP-HFPI, while dramatically reducing the computational complexity.

eess.SP↗

arXiv2024

Distributed Rate-Splitting Multiple Access for Multilayer Satellite Communications

Future wireless networks, in particular, 5G and beyond, are anticipated to deploy dense Low Earth Orbit (LEO) satellites to provide global coverage and broadband connectivity. However, the limited frequency band and the coexistence of multiple constellations bring new challenges for interference management. In this paper, we propose a robust multilayer interference management scheme for spectrum sharing in heterogeneous satellite networks with statistical channel state information (CSI) at the transmitter (CSIT) and receivers (CSIR). In the proposed scheme, Rate-Splitting Multiple Access (RSMA), as a general and powerful framework for interference management and multiple access strategies, is implemented distributedly at GEO and LEO satellites, coined Distributed-RSMA (D-RSMA). By doing so, D-RSMA aims to mitigate the interference and boost the user fairness of the overall multilayer satellite system. Specifically, we study the problem of jointly optimizing the GEO/LEO precoders and message splits to maximize the minimum rate among User Terminals (UTs) subject to a transmit power constraint at all satellites. A robust algorithm is proposed to solve the original non-convex optimization problem. Numerical results demonstrate the effectiveness and robustness towards network load and CSI uncertainty of our proposed D-RSMA scheme. Benefiting from the interference management capability, D-RSMA provides significant max-min fairness performance gains compared to several benchmark schemes.

cs.IT↗

arXiv2024

Transmitter Side Beyond-Diagonal RIS for mmWave Integrated Sensing and Communications

This work initiates the study of a beyond-diagonal reconfigurable intelligent surface (BD-RIS)-aided transmitter architecture for integrated sensing and communication (ISAC) in the millimeter-wave (mmWave) frequency band. Deploying BD-RIS at the transmitter side not only alleviates the need for extensive fully digital radio frequency (RF) chains but also enhances both communication and sensing performance. These benefits are facilitated by the additional design flexibility introduced by the fully-connected scattering matrix of BD-RIS. To achieve the aforementioned benefits, in this work, we propose an efficient two-stage algorithm to design the digital beamforming of the transmitter and the scattering matrix of the BD-RIS with the aim of jointly maximizing the sum rate for multiple communication users and minimizing the largest eigenvalue of the Cramer-Rao bound (CRB) matrix for multiple sensing targets. Numerical results show that the transmitter-side BD-RIS-aided mmWave ISAC outperforms the conventional diagonal-RIS-aided ones in both communication and sensing performance.

cs.IT↗

arXiv2024

Simultaneously Transmitting and Reflecting Reconfigurable Intelligent Surfaces Empowered Cooperative Rate Splitting with User Relaying

In this work, we unveil the advantages of synergizing cooperative rate splitting (CRS) with user relaying and simultaneously transmitting and reflecting reconfigurable intelligent surface (STAR RIS). Specifically, we propose a novel STAR RIS-assisted CRS transmission framework, featuring six unique transmission modes that leverage various combination of the relaying protocols (including full duplex-FD and half duplex-HD) and the STAR RIS configuration protocols (including energy splitting-ES, mode switching-MS, and time splitting-TS). With the objective of maximizing the minimum user rate, we then propose a unified successive convex approximation (SCA)-based alternative optimization (AO) algorithm to jointly optimize the transmit active beamforming, common rate allocation, STAR RIS passive beamforming, as well as time allocation (for HD or TS protocols) subject to the transmit power constraint at the base station (BS) and the law of energy conservation at the STAR RIS. To alleviate the computational burden, we further propose a low-complexity algorithm that incorporates a closed-form passive beamforming design. Numerical results show that our proposed framework significantly enhances user fairness compared with conventional CRS schemes without STAR RIS or other STAR RIS empowered multiple access schemes. Moreover, the proposed low-complexity algorithm dramatically reduces the computational complexity while achieving very close performance to the AO method.

cs.IT↗

arXiv2024

Distributed Multi-Objective Dynamic Offloading Scheduling for Air-Ground Cooperative MEC

Utilizing unmanned aerial vehicles (UAVs) with edge server to assist terrestrial mobile edge computing (MEC) has attracted tremendous attention. Nevertheless, state-of-the-art schemes based on deterministic optimizations or single-objective reinforcement learning (RL) cannot reduce the backlog of task bits and simultaneously improve energy efficiency in highly dynamic network environments, where the design problem amounts to a sequential decision-making problem. In order to address the aforementioned problems, as well as the curses of dimensionality introduced by the growing number of terrestrial terrestrial users, this paper proposes a distributed multi-objective (MO) dynamic trajectory planning and offloading scheduling scheme, integrated with MORL and the kernel method. The design of n-step return is also applied to average fluctuations in the backlog. Numerical results reveal that the n-step return can benefit the proposed kernel-based approach, achieving significant improvement in the long-term average backlog performance, compared to the conventional 1-step return design. Due to such design and the kernel-based neural network, to which decision-making features can be continuously added, the kernel-based approach can outperform the approach based on fully-connected deep neural network, yielding improvement in energy consumption and the backlog performance, as well as a significant reduction in decision-making and online learning time.

cs.IT↗

arXiv2024

Rate-Splitting Multiple Access for Simultaneous Multi-User Communication and Multi-Target Sensing

In this paper, we initiate the study of rate-splitting multiple access (RSMA) for a mono-static integrated sensing and communication (ISAC) system, where the dual-functional base station (BS) simultaneously communicates with multiple users and detects multiple moving targets. We aim at optimizing the ISAC waveform to jointly maximize the max-min fairness (MMF) rate of the communication users and minimize the largest eigenvalue of the Cramér-Rao bound (CRB) matrix for unbiased estimation. The CRB matrix considered in this work is general as it involves the estimation of angular direction, complex reflection coefficient, and Doppler frequency for multiple moving targets. Simulation results demonstrate that RSMA maintains a larger communication and sensing trade-off than conventional space-division multiple access (SDMA) and it is capable of detecting multiple targets with a high detection accuracy. The finding highlights the potential of RSMA as an effective and powerful strategy for interference management in the general multi-user multi-target ISAC systems.

cs.IT↗