arXiv subjects

Yijiong Lin

Publications and source records attributed to Yijiong Lin.

17 recordsLinked to original sources

arXiv2025

NeuralTouch: Neural Descriptors for Precise Sim-to-Real Tactile Robot Control

Grasping accuracy is a critical prerequisite for precise object manipulation, often requiring careful alignment between the robot hand and object. Neural Descriptor Fields (NDF) offer a promising vision-based method to generate grasping poses that generalize across object categories. However, NDF alone can produce inaccurate poses due to imperfect camera calibration, incomplete point clouds, and object variability. Meanwhile, tactile sensing enables more precise contact, but existing approaches typically learn policies limited to simple, predefined contact geometries. In this work, we introduce NeuralTouch, a multimodal framework that integrates NDF and tactile sensing to enable accurate, generalizable grasping through gentle physical interaction. Our approach leverages NDF to implicitly represent the target contact geometry, from which a deep reinforcement learning (RL) policy is trained to refine the grasp using tactile feedback. This policy is conditioned on the neural descriptors and does not require explicit specification of contact types. We validate NeuralTouch through ablation studies in simulation and zero-shot transfer to real-world manipulation tasks--such as peg-out-in-hole and bottle lid opening--without additional fine-tuning. Results show that NeuralTouch significantly improves grasping accuracy and robustness over baseline methods, offering a general framework for precise, contact-rich robotic manipulation.

cs.RO↗

arXiv2025

ViTacGen: Robotic Pushing with Vision-to-Touch Generation

Robotic pushing is a fundamental manipulation task that requires tactile feedback to capture subtle contact forces and dynamics between the end-effector and the object. However, real tactile sensors often face hardware limitations such as high costs and fragility, and deployment challenges involving calibration and variations between different sensors, while vision-only policies struggle with satisfactory performance. Inspired by humans' ability to infer tactile states from vision, we propose ViTacGen, a novel robot manipulation framework designed for visual robotic pushing with vision-to-touch generation in reinforcement learning to eliminate the reliance on high-resolution real tactile sensors, enabling effective zero-shot deployment on visual-only robotic systems. Specifically, ViTacGen consists of an encoder-decoder vision-to-touch generation network that generates contact depth images, a standardized tactile representation, directly from visual image sequence, followed by a reinforcement learning policy that fuses visual-tactile data with contrastive learning based on visual and generated tactile observations. We validate the effectiveness of our approach in both simulation and real world experiments, demonstrating its superior performance and achieving a success rate of up to 86\%.

cs.RO↗

arXiv2025

Text2Touch: Tactile In-Hand Manipulation with LLM-Designed Reward Functions

Large language models (LLMs) are beginning to automate reward design for dexterous manipulation. However, no prior work has considered tactile sensing, which is known to be critical for human-like dexterity. We present Text2Touch, bringing LLM-crafted rewards to the challenging task of multi-axis in-hand object rotation with real-world vision based tactile sensing in palm-up and palm-down configurations. Our prompt engineering strategy scales to over 70 environment variables, and sim-to-real distillation enables successful policy transfer to a tactile-enabled fully actuated four-fingered dexterous robot hand. Text2Touch significantly outperforms a carefully tuned human-engineered baseline, demonstrating superior rotation speed and stability while relying on reward functions that are an order of magnitude shorter and simpler. These results illustrate how LLM-designed rewards can significantly reduce the time from concept to deployable dexterous tactile skills, supporting more rapid and scalable multimodal robot learning. Project website: https://hpfield.github.io/text2touch-website

cs.RO↗

arXiv2025

Classification of Vision-Based Tactile Sensors: A Review

Vision-based tactile sensors (VBTS) have gained widespread application in robotic hands, grippers and prosthetics due to their high spatial resolution, low manufacturing costs, and ease of customization. While VBTSs have common design features, such as a camera module, they can differ in a rich diversity of sensing principles, material compositions, multimodal approaches, and data interpretation methods. Here, we propose a novel classification of VBTS that categorizes the technology into two primary sensing principles based on the underlying transduction of contact into a tactile image: the Marker-Based Transduction Principle and the Intensity-Based Transduction Principle. Marker-Based Transduction interprets tactile information by detecting marker displacement and changes in marker density. In contrast, Intensity-Based Transduction maps external disturbances with variations in pixel values. Depending on the design of the contact module, Marker-Based Transduction can be further divided into two subtypes: Simple Marker-Based (SMB) and Morphological Marker-Based (MMB) mechanisms. Similarly, the Intensity-Based Transduction Principle encompasses the Reflective Layer-based (RLB) and Transparent Layer-Based (TLB) mechanisms. This paper provides a comparative study of the hardware characteristics of these four types of sensors including various combination types, and discusses the commonly used methods for interpreting tactile information. This~comparison reveals some current challenges faced by VBTS technology and directions for future research.

cs.RO↗

arXiv2025

SimShear: Sim-to-Real Shear-based Tactile Servoing

We present SimShear, a sim-to-real pipeline for tactile control that enables the use of shear information without explicitly modeling shear dynamics in simulation. Shear, arising from lateral movements across contact surfaces, is critical for tasks involving dynamic object interactions but remains challenging to simulate. To address this, we introduce shPix2pix, a shear-conditioned U-Net GAN that transforms simulated tactile images absent of shear, together with a vector encoding shear information, into realistic equivalents with shear deformations. This method outperforms baseline pix2pix approaches in simulating tactile images and in pose/shear prediction. We apply SimShear to two control tasks using a pair of low-cost desktop robotic arms equipped with a vision-based tactile sensor: (i) a tactile tracking task, where a follower arm tracks a surface moved by a leader arm, and (ii) a collaborative co-lifting task, where both arms jointly hold an object while the leader follows a prescribed trajectory. Our method maintains contact errors within 1 to 2 mm across varied trajectories where shear sensing is essential, validating the feasibility of sim-to-real shear modeling with rigid-body simulators and opening new directions for simulation in tactile robotics.

cs.RO↗

arXiv2024

Tactile SoftHand-A: 3D-Printed, Tactile, Highly-underactuated, Anthropomorphic Robot Hand with an Antagonistic Tendon Mechanism

A challenging and important problem for tendon-driven multi-fingered robotic hands is to ensure grasping adaptivity while minimizing the number of actuators needed to provide human-like functionality. Inspired by the Pisa/IIT SoftHand, this paper introduces a 3D-printed, highly-underactuated, tactile-sensorized, five-finger robotic hand named the Tactile SoftHand-A, which features an antagonistic mechanism to actively open and close the hand. Our proposed dual-tendon design gives options that allow active control of specific (distal or proximal interphalangeal) joints; for example, to adjust from an enclosing to fingertip grasp or to manipulate an object with a fingertip. We also develop and integrate a new design of fully 3D-printed vision-based tactile sensor within the fingers that requires minimal hand assembly. A control scheme based on analytically extracting contact location and slip from the tactile images is used to coordinate the antagonistic tendon mechanism (using a marker displacement density map, suitable for TacTip-based sensors). We perform extensive testing of a single finger, the entire hand, and the tactile capabilities to show the improvements in reactivity, load-bearing, and manipulability in comparison to a SoftHand that lacks the antagonistic mechanism. We also demonstrate the hand's reactivity to contact disturbances including slip, and how this enables teleoperated control from human hand gestures. Overall, this study points the way towards a class of low-cost, accessible, 3D-printable, tactile, underactuated human-like robotic hands, and we openly release the designs to facilitate others to build upon this work. The designs are open-sourced at https://github.com/HaoranLi-Data/Tactile_SoftHand_A

cs.RO↗

arXiv2024

AnyRotate: Gravity-Invariant In-Hand Object Rotation with Sim-to-Real Touch

Human hands are capable of in-hand manipulation in the presence of different hand motions. For a robot hand, harnessing rich tactile information to achieve this level of dexterity still remains a significant challenge. In this paper, we present AnyRotate, a system for gravity-invariant multi-axis in-hand object rotation using dense featured sim-to-real touch. We tackle this problem by training a dense tactile policy in simulation and present a sim-to-real method for rich tactile sensing to achieve zero-shot policy transfer. Our formulation allows the training of a unified policy to rotate unseen objects about arbitrary rotation axes in any hand direction. In our experiments, we highlight the benefit of capturing detailed contact information when handling objects of varying properties. Interestingly, we found rich multi-fingered tactile sensing can detect unstable grasps and provide a reactive behavior that improves the robustness of the policy. The project website can be found at https://maxyang27896.github.io/anyrotate/.

cs.RO↗

arXiv2024

Snap-it, Tap-it, Splat-it: Tactile-Informed 3D Gaussian Splatting for Reconstructing Challenging Surfaces

Touch and vision go hand in hand, mutually enhancing our ability to understand the world. From a research perspective, the problem of mixing touch and vision is underexplored and presents interesting challenges. To this end, we propose Tactile-Informed 3DGS, a novel approach that incorporates touch data (local depth maps) with multi-view vision data to achieve surface reconstruction and novel view synthesis. Our method optimises 3D Gaussian primitives to accurately model the object's geometry at points of contact. By creating a framework that decreases the transmittance at touch locations, we achieve a refined surface reconstruction, ensuring a uniformly smooth depth map. Touch is particularly useful when considering non-Lambertian objects (e.g. shiny or reflective surfaces) since contemporary methods tend to fail to reconstruct with fidelity specular highlights. By combining vision and tactile sensing, we achieve more accurate geometry reconstructions with fewer images than prior methods. We conduct evaluation on objects with glossy and reflective surfaces and demonstrate the effectiveness of our approach, offering significant improvements in reconstruction quality.

cs.CV↗

arXiv2023

TouchSDF: A DeepSDF Approach for 3D Shape Reconstruction using Vision-Based Tactile Sensing

Humans rely on their visual and tactile senses to develop a comprehensive 3D understanding of their physical environment. Recently, there has been a growing interest in exploring and manipulating objects using data-driven approaches that utilise high-resolution vision-based tactile sensors. However, 3D shape reconstruction using tactile sensing has lagged behind visual shape reconstruction because of limitations in existing techniques, including the inability to generalise over unseen shapes, the absence of real-world testing, and limited expressive capacity imposed by discrete representations. To address these challenges, we propose TouchSDF, a Deep Learning approach for tactile 3D shape reconstruction that leverages the rich information provided by a vision-based tactile sensor and the expressivity of the implicit neural representation DeepSDF. Our technique consists of two components: (1) a Convolutional Neural Network that maps tactile images into local meshes representing the surface at the touch location, and (2) an implicit neural function that predicts a signed distance function to extract the desired 3D shape. This combination allows TouchSDF to reconstruct smooth and continuous 3D shapes from tactile inputs in simulation and real-world settings, opening up research avenues for robust 3D-aware representations and improved multimodal perception in robotics. Code and supplementary material are available at: https://touchsdf.github.io/

cs.CV↗

arXiv2023

Attention for Robot Touch: Tactile Saliency Prediction for Robust Sim-to-Real Tactile Control

High-resolution tactile sensing can provide accurate information about local contact in contact-rich robotic tasks. However, the deployment of such tasks in unstructured environments remains under-investigated. To improve the robustness of tactile robot control in unstructured environments, we propose and study a new concept: \textit{tactile saliency} for robot touch, inspired by the human touch attention mechanism from neuroscience and the visual saliency prediction problem from computer vision. In analogy to visual saliency, this concept involves identifying key information in tactile images captured by a tactile sensor. While visual saliency datasets are commonly annotated by humans, manually labelling tactile images is challenging due to their counterintuitive patterns. To address this challenge, we propose a novel approach comprised of three interrelated networks: 1) a Contact Depth Network (ConDepNet), which generates a contact depth map to localize deformation in a real tactile image that contains target and noise features; 2) a Tactile Saliency Network (TacSalNet), which predicts a tactile saliency map to describe the target areas for an input contact depth map; 3) and a Tactile Noise Generator (TacNGen), which generates noise features to train the TacSalNet. Experimental results in contact pose estimation and edge-following in the presence of distractors showcase the accurate prediction of target features from real tactile images. Overall, our tactile saliency prediction approach gives robust sim-to-real tactile control in environments with unknown distractors. Project page: https://sites.google.com/view/tactile-saliency/.

cs.RO↗

arXiv2023

Sim-to-Real Model-Based and Model-Free Deep Reinforcement Learning for Tactile Pushing

Object pushing presents a key non-prehensile manipulation problem that is illustrative of more complex robotic manipulation tasks. While deep reinforcement learning (RL) methods have demonstrated impressive learning capabilities using visual input, a lack of tactile sensing limits their capability for fine and reliable control during manipulation. Here we propose a deep RL approach to object pushing using tactile sensing without visual input, namely tactile pushing. We present a goal-conditioned formulation that allows both model-free and model-based RL to obtain accurate policies for pushing an object to a goal. To achieve real-world performance, we adopt a sim-to-real approach. Our results demonstrate that it is possible to train on a single object and a limited sample of goals to produce precise and reliable policies that can generalize to a variety of unseen objects and pushing scenarios without domain randomization. We experiment with the trained agents in harsh pushing conditions, and show that with significantly more training samples, a model-free policy can outperform a model-based planner, generating shorter and more reliable pushing trajectories despite large disturbances. The simplicity of our training environment and effective real-world performance highlights the value of rich tactile information for fine manipulation. Code and videos are available at https://sites.google.com/view/tactile-rl-pushing/.

cs.RO↗

arXiv2023

Bi-Touch: Bimanual Tactile Manipulation with Sim-to-Real Deep Reinforcement Learning

Bimanual manipulation with tactile feedback will be key to human-level robot dexterity. However, this topic is less explored than single-arm settings, partly due to the availability of suitable hardware along with the complexity of designing effective controllers for tasks with relatively large state-action spaces. Here we introduce a dual-arm tactile robotic system (Bi-Touch) based on the Tactile Gym 2.0 setup that integrates two affordable industrial-level robot arms with low-cost high-resolution tactile sensors (TacTips). We present a suite of bimanual manipulation tasks tailored towards tactile feedback: bi-pushing, bi-reorienting and bi-gathering. To learn effective policies, we introduce appropriate reward functions for these tasks and propose a novel goal-update mechanism with deep reinforcement learning. We also apply these policies to real-world settings with a tactile sim-to-real approach. Our analysis highlights and addresses some challenges met during the sim-to-real application, e.g. the learned policy tended to squeeze an object in the bi-reorienting task due to the sim-to-real gap. Finally, we demonstrate the generalizability and robustness of this system by experimenting with different unseen objects with applied perturbations in the real world. Code and videos are available at https://sites.google.com/view/bi-touch/.

cs.RO↗

arXiv2022

Tactile Gym 2.0: Sim-to-real Deep Reinforcement Learning for Comparing Low-cost High-Resolution Robot Touch

High-resolution optical tactile sensors are increasingly used in robotic learning environments due to their ability to capture large amounts of data directly relating to agent-environment interaction. However, there is a high barrier of entry to research in this area due to the high cost of tactile robot platforms, specialised simulation software, and sim-to-real methods that lack generality across different sensors. In this letter we extend the Tactile Gym simulator to include three new optical tactile sensors (TacTip, DIGIT and DigiTac) of the two most popular types, Gelsight-style (image-shading based) and TacTip-style (marker based). We demonstrate that a single sim-to-real approach can be used with these three different sensors to achieve strong real-world performance despite the significant differences between real tactile images. Additionally, we lower the barrier of entry to the proposed tasks by adapting them to an inexpensive 4-DoF robot arm, further enabling the dissemination of this benchmark. We validate the extended environment on three physically-interactive tasks requiring a sense of touch: object pushing, edge following and surface following. The results of our experimental validation highlight some differences between these sensors, which may help future researchers select and customize the physical characteristics of tactile sensors for different manipulations scenarios.

cs.RO↗

arXiv2022

DigiTac: A DIGIT-TacTip Hybrid Tactile Sensor for Comparing Low-Cost High-Resolution Robot Touch

Deep learning combined with high-resolution tactile sensing could lead to highly capable dexterous robots. However, progress is slow because of the specialist equipment and expertise. The DIGIT tactile sensor offers low-cost entry to high-resolution touch using GelSight-type sensors. Here we customize the DIGIT to have a 3D-printed sensing surface based on the TacTip family of soft biomimetic optical tactile sensors. The DIGIT-TacTip (DigiTac) enables direct comparison between these distinct tactile sensor types. For this comparison, we introduce a tactile robot system comprising a desktop arm, mounts and 3D-printed test objects. We use tactile servo control with a PoseNet deep learning model to compare the DIGIT, DigiTac and TacTip for edge- and surface-following over 3D-shapes. All three sensors performed similarly at pose prediction, but their constructions led to differing performances at servo control, offering guidance for researchers selecting or innovating tactile sensors. All hardware and software for reproducing this study will be openly released. Project website: www.lepora.com/digitac. Project repository: www.github.com/nlepora/digitac-design.

cs.RO↗

arXiv2021

Probabilistic Discriminative Models Address the Tactile Perceptual Aliasing Problem

In this paper, our aim is to highlight Tactile Perceptual Aliasing as a problem when using deep neural networks and other discriminative models. Perceptual aliasing will arise wherever a physical variable extracted from tactile data is subject to ambiguity between stimuli that are physically distinct. Here we address this problem using a probabilistic discriminative model implemented as a 5-component mixture density network comprised of a deep neural network that predicts the parameters of a Gaussian mixture model. We show that discriminative regression models such as deep neural networks and Gaussian process regression perform poorly on aliased data, only making accurate predictions when the sources of aliasing are removed. In contrast, the mixture density network identifies aliased data with improved prediction accuracy. The uncertain predictions of the model form patterns that are consistent with the various sources of perceptual ambiguity. In our view, perceptual aliasing will become an unavoidable issue for robot touch as the field progresses to training robots that act in uncertain and unstructured environments, such as with deep reinforcement learning.

cs.RO↗

arXiv2020

Invariant Transform Experience Replay: Data Augmentation for Deep Reinforcement Learning

Deep Reinforcement Learning (RL) is a promising approach for adaptive robot control, but its current application to robotics is currently hindered by high sample requirements. To alleviate this issue, we propose to exploit the symmetries present in robotic tasks. Intuitively, symmetries from observed trajectories define transformations that leave the space of feasible RL trajectories invariant and can be used to generate new feasible trajectories, which could be used for training. Based on this data augmentation idea, we formulate a general framework, called Invariant Transform Experience Replay that we present with two techniques: (i) Kaleidoscope Experience Replay exploits reflectional symmetries and (ii) Goal-augmented Experience Replay which takes advantage of lax goal definitions. In the Fetch tasks from OpenAI Gym, our experimental results show significant increases in learning rates and success rates. Particularly, we attain a 13, 3, and 5 times speedup in the pushing, sliding, and pick-and-place tasks respectively in the multi-goal setting. Performance gains are also observed in similar tasks with obstacles and we successfully deployed a trained policy on a real Baxter robot. Our work demonstrates that invariant transformations on RL trajectories are a promising methodology to speed up learning in deep RL.

cs.RO↗

arXiv2019

Towards More Sample Efficiency in Reinforcement Learning with Data Augmentation

Deep reinforcement learning (DRL) is a promising approach for adaptive robot control, but its current application to robotics is currently hindered by high sample requirements. We propose two novel data augmentation techniques for DRL in order to reuse more efficiently observed data. The first one called Kaleidoscope Experience Replay exploits reflectional symmetries, while the second called Goal-augmented Experience Replay takes advantage of lax goal definitions. Our preliminary experimental results show a large increase in learning speed.

cs.AI↗