arXiv subjects

Yiliang Bao

Publications and source records attributed to Yiliang Bao.

7 recordsLinked to original sources

arXiv2026

Fast, optimal readout of a tethered optomechanical pressure sensor

We demonstrate a fast readout method for tethered optomechanical pressure sensors. The fast readout method allows mechanical ring-down measurement rates that exceed the total mechanical damping rate $Γ_t$. We model the uncertainty of our ring-down measurements with the Cramér-Rao bound, including the effect of thermomechanical noise. Both our data and the Cramér-Rao bound indicate that measurement rates on the order of the mechanical damping rate produce the lowest uncertainty. At low pressures, using the optimal measurement rate allows 10$\times$ faster measurements or 3$\times$ lower uncertainty compared to allowing our sensor to ring down to the thermomechanical noise floor. Our results allow tethered optomechanical pressure sensors to operate at rates comparable to commercially available pressure gauges, removing an obstacle to adoption of optomechanical pressure sensors in industrial settings.

physics.app-ph↗

arXiv2025

Integrated broadband optical isolator via dynamic rotating destructive interference

Photonic integrated circuits route and shape light on a chip, but back-reflections feed back into coherent on-chip lasers, destabilizing operation and corrupting signals. Robust operation requires an integrated optical isolator that strongly suppresses backward propagation while maintaining low-loss, broadband forward transmission. However, prior on-chip isolators rely on magneto-optic materials or resonance-based filters, which respectively demand non-standard processes or inherently constrain bandwidth. Here, we propose and experimentally demonstrate a traveling-wave optical isolator without magnetic materials or resonant elements. By driving four parallel optical channels with periodic RF waves, we realize dynamic rotating destructive interference that continuously cancels backward-propagating light while leaving forward-propagating light unaffected. We achieve about 30 dB isolation at a wavelength of 789.7 nm and maintain over 24 dB isolation across an approximately 30 nm bandwidth (770 nm to 800 nm), including >20 dB isolation for two simultaneous lasers within an approximately 10 nm wavelength window. This wavelength span covers key alkali atomic transitions, enabling strong suppression of feedback-induced frequency noise and laser instability in atomic spectroscopy, laser cooling, and locking applications. We demonstrate a practical, broadband on-chip isolator applicable from the visible to the near-infrared, which is a crucial step toward fully integrated photonic platforms.

physics.optics↗

arXiv2025

Accurate, precise pressure sensing with tethered optomechanics

We show that optomechanical pressure sensors with characterized density and thickness can achieve uncertainty as low as 1.1 % via comparison with a secondary pressure standard. The agreement between the secondary standard and our optomechanical sensors is a necessary step towards using optomechanical devices as primary pressure sensors. Our silicon nitride and silicon carbide sensors are short-term and long-term stable, displaying Allan deviations compatible with better than 1 % precision and baseline drift significantly lower than the secondary standard. Our measurements also yield the in situ thin-film density of our sensors with 1 % total uncertainty or lower, aiding development of other optomechanical sensors. Our results demonstrate that optomechanical pressure sensors can achieve accuracy, precision, and drift sufficient to replace high performance legacy pressure gauges.

physics.app-ph↗

arXiv2024

Low-power, agile electro-optic frequency comb spectrometer for integrated sensors

Sensing platforms based upon photonic integrated circuits have shown considerable promise; however, they require corresponding advancements in integrated optical readout technologies. Here, we present an on-chip spectrometer that leverages an integrated thin-film lithium niobate modulator to produce a frequency-agile electro-optic frequency comb for interrogating chip-scale temperature and acceleration sensors. The chirped comb process allows for ultralow radiofrequency drive voltages, which are as much as seven orders of magnitude less than the lowest found in the literature and are generated using a chip-scale, microcontroller-driven direct digital synthesizer. The on-chip comb spectrometer is able to simultaneously interrogate both an on-chip temperature sensor and an off-chip, microfabricated optomechanical accelerometer with cutting-edge sensitivities of $\approx 5\ μ \mathrm{K} \cdot \mathrm{Hz}^{-1/2}$ and $\approx 130\ μ\mathrm{m} \cdot \mathrm{s}^{-2} \cdot \mathrm{Hz}^{-1/2}$, respectively. This platform is compatible with a broad range of existing photonic integrated circuit technologies, where its combination of frequency agility and ultralow radiofrequency power requirements are expected to have applications in fields such as quantum science and optical computing.

physics.optics↗

arXiv2022

Cavity optomechanical bistability with an ultrahigh reflectivity photonic crystal membrane

Photonic crystal (PhC) membranes patterned with sub-wavelength periods offer a unique combination of high reflectivity, low mass, and high mechanical quality factor. We demonstrate a PhC membrane that we use as one mirror of a Fabry-Perot cavity with finesse as high as $F=35,000(500)$, corresponding to a record high PhC reflectivity of $R=0.999835(6)$. The fundamental mechanical frequency is 426 kHz, more than twice the optical linewidth, placing it firmly in the resolved-sideband regime. The mechanical quality factor in vacuum is $Q=1.1(1)\times 10^6$, allowing us to achieve values of the single-photon cooperativity as high as ${\cal C}_0=6.6\times10^{-3}$. We easily see optomechanical bistability as hysteresis in the cavity transmission. As the input power is raised well beyond the bistability threshold, dynamical backaction induces strong mechanical oscillation above 1~MHz, even in the presence of air damping. This platform will facilitate advances in optomechanics, precision sensing, and applications of optomechanically-induced bistability.

physics.optics↗

arXiv2022

Intrinsically accurate sensing with an optomechanical accelerometer

We demonstrate a microfabricated optomechanical accelerometer that is capable of percent-level accuracy without external calibration. To achieve this capability, we use a mechanical model of the device behavior that can be characterized by the thermal noise response along with an optical frequency comb readout method that enables high sensitivity, high bandwidth, high dynamic range, and SI-traceable displacement measurements. The resulting intrinsic accuracy was evaluated over a wide frequency range by comparing to a primary vibration calibration system and local gravity. The average agreement was found to be 2.1 % for the calibration system between 0.1 kHz and 15 kHz and better than 0.2 % for the static acceleration. This capability has the potential to replace costly external calibrations and improve the accuracy of inertial guidance systems and remotely deployed accelerometers. Due to the fundamental nature of the intrinsic accuracy approach, it could be extended to other optomechanical transducers, including force and pressure sensors.

physics.ins-det↗

arXiv2020

Broadband Optomechanical Sensing at the Thermodynamic Limit

Cavity optomechanics has opened new avenues of research in both fundamental physics and precision measurement by significantly advancing the sensitivity achievable in detecting attonewton forces, nanoparticles, magnetic fields, and gravitational waves. A fundamental limit to sensitivity for these measurements is energy exchange with the environment as described by the fluctuation-dissipation theorem. While the limiting sensitivity can be increased by increasing the mass or reducing the damping of the mechanical sensing element, these design tradeoffs lead to larger detectors or limit the range of mechanical frequencies that can be measured, excluding the bandwidth requirements for many real-world applications. We report on a microfabricated optomechanical sensing platform based on a Fabry-Perot microcavity and show that when operating as an accelerometer it can achieve nearly ideal broadband performance at the thermodynamic limit (Brownian motion of the proof mass) with the highest sensitivity reported to date over a wide frequency range ($314\,nm \cdot s^{-2}/\sqrt{Hz}$ over 6.8 kHz). This approach is applicable to a range of measurements from pressure and force sensing to seismology and gravimetry, including searches for new physics such as non-Newtonian gravity or dark matter.

physics.app-ph↗