Yimie Yuan | Searcharxiv

arXiv2026

Integration and characterization of Readout Electronics System for dN/dx Measurement with Drift Chamber Prototype

To explore the feasibility of high-precision particle identification using the cluster counting technique for the drift chamber, a dedicated readout electronics system with low noise, high bandwidth, and high sampling rate is required. This paper presents the design and performance evaluation of a scalable readout prototype developed for this application. The system architecture integrates a custom front-end with a $1.3\ \text{GSps}$ waveform sampling backend, implemented within a modular 120-channel framework. Laboratory characterization of the 40-channel prototype demonstrates a $-3$ dB analog bandwidth of $460\ \text{MHz}$ and an Equivalent Noise Input current of $0.81\ μ\text{A}_\text{rms}$. These specifications are essential for preserving the fast temporal features of ionization signals. Furthermore, the system achieves an intrinsic timing jitter of $0.87\ \text{ns}$, which satisfies the timing precision requirements for drift distance measurement. Joint experiments with a drift chamber prototype using cosmic rays verified the system's capability to resolve discrete ionization peaks within piled-up waveforms. These results confirm that the readout electronics provide the signal fidelity and temporal resolution necessary for future cluster counting algorithm development.

physics.ins-det↗

arXiv2026

CTPX1: A Highly Integrated and High-Throughput Data-Driven Camera Based on Timepix4

The upgrade of the China Spallation Neutron Source (CSNS-II) will raise the proton beam power to 500 kW. Consequently, the existing Timepix3-based detector systems, limited to a count rate of 80 Mhits/s, will encounter severe saturation challenges. To address the demand of the Energy-Resolved Neutron Imaging instrument (ERNI) for next-generation higher count-rate electronics, this paper presents CTPX1, a high-performance data-driven camera system based on the Timepix4 ASIC. The system adopts a compact modular architecture, integrating readout electronics, a precision high-voltage bias unit, and a TEC temperature control subsystem. To fully exploit the readout potential of the Timepix4 ASIC's 16 high-speed serial links, this paper proposes a two-stage parallel processing architecture. This architecture achieves real-time data aggregation with a total bandwidth of up to 81.92 Gbps. Over a continuous 12-hour operation period, temperature fluctuations were kept within 0.1 °C while the high-voltage output noise remained below 1 mV. High-flux X-ray testing indicates that the system achieves a peak event readout rate of 1.17 Ghits/s, approaching the limit of the configured link speed. In-beam neutron verification at CSNS confirms that the camera successfully resolves fine spatial structures, achieving an imaging performance consistent with the 55 μm pixel pitch of the sensor. Furthermore, the clear observation of spectral features in the Time of flight (TOF) spectrum of a γ-Fe sample validates the system's good time resolution. This camera effectively addresses the data readout saturation challenges, validates the feasibility of Timepix4 technology for neutron imaging, and provides a viable solution for next-generation high-performance neutron imaging instruments.

physics.ins-det↗