arXiv subjects

Yimo Han

Publications and source records attributed to Yimo Han.

27 records · Page 2Linked to original sources

arXiv2018

Sub-Nanometer Channels Embedded in Two-Dimensional Materials

Two-dimensional (2D) materials are among the most promising candidates for next-generation electronics due to their atomic thinness, allowing for flexible transparent electronics and ultimate length scaling. Thus far, atomically-thin p-n junctions, metal-semiconductor contacts, and metal-insulator barriers have been demonstrated. While 2D materials achieve the thinnest possible devices, precise nanoscale control over the lateral dimensions is also necessary. Here, we report the direct synthesis of sub-nanometer-wide 1D MoS2 channels embedded within WSe2 monolayers, using a dislocation-catalyzed approach. The 1D channels have edges free of misfit dislocations and dangling bonds, forming a coherent interface with the embedding 2D matrix. Periodic dislocation arrays produce 2D superlattices of coherent MoS2 1D channels in WSe2. Using molecular dynamics simulations, we have identified other combinations of 2D materials where 1D channels can also be formed. The electronic band structure of these 1D channels offer the promise of carrier confinement in a direct-gap material and charge separation needed to access the ultimate length scales necessary for future electronic applications.

cond-mat.mtrl-sci↗

arXiv2018

Deep sub-Ångstrom imaging of 2D materials with a high dynamic range detector

Aberration-corrected optics have made electron microscopy at atomic-resolution a widespread and often essential tool for nanocharacterization. Image resolution is dominated by beam energy and the numerical aperture of the lens (α), with state-of-the-art reaching ~0.47 Å at 300 keV. Two-dimensional materials are imaged at lower beam energies to avoid knock-on damage, limiting spatial resolution to ~1 Å. Here, by combining a new electron microscope pixel array detector with the dynamic range to record the complete distribution of transmitted electrons and full-field ptychography to recover phase information from the full phase space, we increased the spatial resolution well beyond the traditional lens limitations. At 80 keV beam energy, our ptychographic reconstructions significantly improved image contrast of single-atom defects in MoS2, reaching an information limit close to 5α, corresponding to a 0.39 Å Abbe resolution, at the same dose and imaging conditions where conventional imaging modes reach only 0.98 Å.

cond-mat.mtrl-sci↗

arXiv2017

Theory and Practice of Electron Diffraction from Single Atoms and Extended Objects using an Electron Microscope Pixel Array Detector

What does the diffraction pattern from a single atom look like? How does it differ from the scattering from long range potential? With the development of new high-dynamic range pixel array detectors to measure the complete momentum distribution, these questions have immediate relevance for designing and understanding momentum-resolved imaging modes. We explore the asymptotic limits of long range and short range potentials. We use a simple quantum mechanical model to explain the general and asymptotic limits for the probability distribution in both and real and reciprocal space. Features in the scattering potential much larger than the probe size cause the bright-field disk to deflect uniformly, while features much smaller than the probe size, instead of a deflection cause a redistribution of intensity within the bright-field disk. Because long range and short range features are encoded differently in the diffraction pattern, it is possible to separate their contributions in differential phase contrast (DPC) or Center-of-Mass (CoM) imaging. The shape profiles for atomic resolution CoM imaging are dominated by the shape of the probe gradient and not the highly-singular atomic potentials or their local fields. Instead, only the peak height shows an atomic-number sensitivity, whose precise dependence is determined by the convergence angle. At lower convergence angles, the contrast oscillates with increasing atomic number, similar to bright field imaging. The range of collection angles impacts DPC and CoM imaging differently, with CoM being more sensitive to the upper cutoff limit, while DPC is more sensitive to the lower cutoff.

physics.ins-det↗

arXiv2017

Tailoring Semiconductor Lateral Multi-junctions for Giant Photoconductivity Enhancement

Semiconductor heterostructures have played a critical role as the enabler for new science and technology. The emergence of transition metal dichalcogenides (TMDs) as atomically thin semiconductors has opened new frontiers in semiconductor heterostructures either by stacking different TMDs to form vertical heterojunctions or by stitching them laterally to form lateral heterojunctions via direct growth. In conventional semiconductor heterostructures, the design of multi-junctions is critical to achieve carrier confinement. Analogously, we report successful synthesis of monolayer WS2/WS2(1-x)Se2x/WS2 multi-junction lateral heterostructure via direct growth by chemical vapor deposition. The grown structures are characterized by Raman, photoluminescence, and annular dark-field scanning transmission electron microscopy to determine its lateral compositional profile. More importantly, using microwave impedance microscopy, we demonstrate that the local photoconductivity in the alloy region can be tailored and enhanced by 2 orders of magnitude over pure WS2. Finite element analysis confirms that this effect is due to the carrier diffusion and confinement into the alloy region. Our work exemplifies the technological potential of atomically thin lateral heterostructures in optoelectronic applications.

cond-mat.mtrl-sci↗

arXiv2017

Coherent Atomically-Thin Superlattices with Engineered Strain

Epitaxy forms the basis of modern electronics and optoelectronics. We report coherent atomically-thin superlattices, in which different transition metal dichalcogenide monolayers--despite large lattice mismatches--are repeated and integrated without dislocations. Grown by a novel omnidirectional epitaxy, these superlattices display fully-matched lattice constants across heterointerfaces while maintaining a surprisingly isotropic lattice structure and triangular symmetry. This strong epitaxial strain is precisely engineered via the nanoscale supercell dimensions, thereby enabling broad tuning of the optical properties and producing photoluminescence peak shifts as large as 250 meV. We present theoretical models to explain this coherent growth as well as the energetic interplay governing the flat-rippled configuration space in these strained monolayers. Such coherent superlattices provide novel building blocks with targeted functionalities at the atomically-thin monolayer limit.

cond-mat.mtrl-sci↗

arXiv2017

Observation of oscillatory relaxation in the Sn-terminated surface of epitaxial rock-salt SnSe $\{111\}$ topological crystalline insulator

Topological crystalline insulators have been recently predicted and observed in rock-salt structure SnSe $\{111\}$ thin films. Previous studies have suggested that the Se-terminated surface of this thin film with hydrogen passivation, has a reduced surface energy and is thus a preferred configuration. In this paper, synchrotron-based angle-resolved photoemission spectroscopy, along with density functional theory calculations, are used to demonstrate conclusively that a rock-salt SnSe $\{111\}$ thin film epitaxially-grown on \ce{Bi2Se3} has a stable Sn-terminated surface. These observations are supported by low energy electron diffraction (LEED) intensity-voltage measurements and dynamical LEED calculations, which further show that the Sn-terminated SnSe $\{111\}$ thin film has undergone a surface structural relaxation of the interlayer spacing between the Sn and Se atomic planes. In sharp contrast to the Se-terminated counterpart, the observed Dirac surface state in the Sn-terminated SnSe $\{111\}$ thin film is shown to yield a high Fermi velocity, $0.50\times10^6$m/s, which suggests a potential mechanism of engineering the Dirac surface state of topological materials by tuning the surface configuration.

cond-mat.mtrl-sci↗

arXiv2016

Atomically-thin Ohmic Edge Contacts Between Two-dimensional Materials

With the decrease of the dimensions of electronic devices, the role played by electrical contacts is ever increasing, eventually coming to dominate the overall device volume and total resistance. This is especially problematic for monolayers of semiconducting transition metal dichalcogenides (TMDs), which are promising candidates for atomically thin electronics. Ideal electrical contacts to them would require the use of similarly thin electrode materials while maintaining low contact resistances. Here we report a scalable method to fabricate ohmic graphene edge contacts to two representative monolayer TMDs - MoS2 and WS2. The graphene and TMD layer are laterally connected with wafer-scale homogeneity, no observable overlap or gap, and a low average contact resistance of 30 k$Ω$ $μ$m. The resulting graphene edge contacts show linear current-voltage (IV) characteristics at room temperature, with ohmic behavior maintained down to liquid helium temperatures.

cond-mat.mes-hall↗

arXiv2015

Chemical assembly of atomically thin transistors and circuits in a large scale

Next-generation electronics calls for new materials beyond silicon for increased functionality, performance, and scaling in integrated circuits. Carbon nanotubes and semiconductor nanowires are at the forefront of these materials, but have challenges due to the complex fabrication techniques required for large-scale applications. Two-dimensional (2D) gapless graphene and semiconducting transition metal dichalcogenides (TMDCs) have emerged as promising electronic materials due to their atomic thickness, chemical stability and scalability. Difficulties in the assembly of 2D electronic structures arise in the precise spatial control over the metallic and semiconducting atomic thin films. Ultimately, this impedes the maturity of integrating atomic elements in modern electronics. Here, we report the large-scale spatially controlled synthesis of the single-layer semiconductor molybdenum disulfide (MoS2) laterally in contact with conductive graphene. Transition electron microscope (TEM) studies reveal that the single-layer MoS2 nucleates at the edge of the graphene, creating a lateral 2D heterostructure. We demonstrate such chemically assembled 2D atomic transistors exhibit high transconductance (10 uS), on-off ratios (10^6), and mobility (20 cm^2 V^-1 s^-1). We assemble 2D logic circuits, such as a heterostructure NMOS inverter with a high voltage gain, up to 70, enabled by the precise site selectivity from atomically thin conducting and semiconducting crystals. This scalable chemical assembly of 2D heterostructures may usher in a new era in two-dimensional electronic circuitry and computing.

cond-mat.mtrl-sci↗

arXiv2015

Esaki diodes in van der Waals heterojunctions with broken-gap energy band alignment

Van der Waals (vdW) heterojunctions composed of 2-dimensional (2D) layered materials are emerging as a solid-state materials family that exhibit novel physics phenomena that can power high performance electronic and photonic applications. Here, we present the first demonstration of an important building block in vdW solids: room temperature (RT) Esaki tunnel diodes. The Esaki diodes were realized in vdW heterostructures made of black phosphorus (BP) and tin diselenide (SnSe2), two layered semiconductors that possess a broken-gap energy band offset. The presence of a thin insulating barrier between BP and SnSe2 enabled the observation of a prominent negative differential resistance (NDR) region in the forward-bias current-voltage characteristics, with a peak to valley ratio of 1.8 at 300 K and 2.8 at 80 K. A weak temperature dependence of the NDR indicates electron tunneling being the dominant transport mechanism, and a theoretical model shows excellent agreement with the experimental results. Furthermore, the broken-gap band alignment is confirmed by the junction photoresponse and the phosphorus double planes in a single layer of BP are resolved in transmission electron microscopy (TEM) for the first time. Our results represent a significant advance in the fundamental understanding of vdW heterojunctions, and widen the potential applications base of 2D layered materials.

cond-mat.mtrl-sci↗