SearcharxivSearch

arXiv subjects

Yin Du

Publications and source records attributed to Yin Du.

9 recordsLinked to original sources

Adaptive Multi-Objective Tiered Storage Configuration for KV Cache in LLM Service

The memory-for-computation paradigm of KV caching is essential for accelerating large language model (LLM) inference service, but limited GPU high-bandwidth memory (HBM) capacity motivates offloading the KV cache to cheaper external storage tiers. While this expands capacity, it introduces the challenge of dynamically managing heterogeneous storage resources to balance cost, throughput, and latency under varying workloads. We formulate this as a multi-objective optimization problem: identifying the Pareto frontier across these metrics within the storage configuration space. Using a high-fidelity end-to-end simulator, we observe that the objective functions are non-analytic and exhibit complex variable coupling, making the Pareto frontier difficult to approximate analytically. To obtain the frontier, we introduce Kareto, a KV-cache Adaptive REsource managemenT Optimizer. Kareto leverages a diminishing-return-guided pruning method to efficiently navigate the large configuration space and approximate the Pareto frontier. Additionally, it incorporates a fine-grained adaptive tuner that uses eviction policies in tier storage and KV block access patterns for group-specific cache management, improving cache efficiency. Experiments on real-world traces show that Kareto adapts to workload and can identify configurations of better cost efficiency, covering static strategies. Compared to the fixed setup with 1024 GB DRAM, Kareto can improve throughput by up to 9.3%, or reduce latency by up to 58.3%, or lower cost by up to 20.2% under respective optimization objectives.

cs.AR

LatencyPrism: Online Non-intrusive Latency Sculpting for SLO-Guaranteed LLM Inference

LLM inference latency critically determines user experience and operational costs, directly impacting throughput under SLO constraints. Even brief latency spikes degrade service quality despite acceptable average performance. However, distributed inference environments featuring diverse software frameworks and XPU architectures combined with dynamic workloads make latency analysis challenging. Constrained by intrusive designs that necessitate service restarts or even suspension, and by hardware-bound implementations that fail to adapt to heterogeneous inference environments, existing AI profiling methods are often inadequate for real-time production analysis. We present LatencyPrism, the first zero-intrusion multi-platform latency sculpting system. It aims to break down the inference latency across pipeline, proactively alert on inference latency anomalies, and guarantee adherence to SLOs, all without requiring code modifications or service restarts. LatencyPrism has been deployed across thousands of XPUs for over six months. It enables low-overhead real-time monitoring at batch level with alerts triggered in milliseconds. This approach distinguishes between workload-driven latency variations and anomalies indicating underlying issues with an F1-score of 0.98. We also conduct extensive experiments and investigations into root cause analysis to demonstrate LatencyPrism's capability. Furthermore, we introduce the first LLM anomaly simulation toolkit to facilitate future research in robust and predictable inference systems.

cs.DC

Kunlun Anomaly Troubleshooter: Enabling Kernel-Level Anomaly Detection and Causal Reasoning for Large Model Distributed Inference

Anomaly troubleshooting for large model distributed inference (LMDI) remains a critical challenge. Resolving anomalies such as inference performance degradation or latency jitter in distributed system demands significant manual efforts from domain experts, resulting in extremely time-consuming diagnosis processes with relatively low accuracy. In this paper, we introduce Kunlun Anomaly Troubleshooter (KAT), the first anomaly troubleshooting framework tailored for LMDI. KAT addresses this problem through two core innovations. First, KAT exploits the synchronicity and consistency of GPU workers, innovatively leverages function trace data to precisely detect kernel-level anomalies and associated hardware components at nanosecond resolution. Second, KAT integrates these detection results into a domain-adapted LLM, delivering systematic causal reasoning and natural language interpretation of complex anomaly symptoms. Evaluations conducted in Alibaba Cloud Service production environment indicate that KAT achieves over 0.884 precision and 0.936 recall in anomaly detection, providing detail anomaly insights that significantly narrow down the diagnostic scope and improve both the efficiency and success rate of troubleshooting.

cs.LG

Designing artificial zinc phosphate tribofilms with tailored mechanical properties by altering the chain length

Zinc dialkyldithiophosphate (ZDDP), as the most prominent lubrication additive, forms tribofilms consisting primarily of zinc phosphate glasses containing sulfides. As sulfur is linked to environmental concerns, sulfur-free zinc phosphate coatings have been sputtered from a Zn3(PO4)2 target and investigated here. Based on the bridging to non-bridging oxygen ratio, determined by X-ray photoelectron spectroscopy (XPS), the as deposited coatings are classified as metaphosphates. As the annealing temperature is increased, the chain lengths are reduced, as witnessed by XPS data indicated by a loss of phosphorus and oxygen of the coating surface, likely due to hydrolysis with water from the atmosphere. Transmission electron microscopy energy-dispersive X-ray spectroscopy line scans show that the XPS-revealed composition change of the coating surface upon annealing occurs over the whole thickness of the coating. This alteration in composition and chain length reductions causes a rise in hardness, reduced Young's modulus, and wear resistance. Therefore, the properties of the artificial zinc phosphate tribofilms can be tailored via a thermally stimulated composition change, causing an alternation in chain length from meta- to orthophosphate and thereby enabling the design of coatings with desired mechanical properties.

cond-mat.mtrl-sci

Weak Antilocalization Effect and Noncentrosymmetric Superconductivity in a Topologically Nontrivial Semimetal LuPdBi

A large number of half-Heusler compounds have been recently proposed as three-dimensional (3D) topological insulators (TIs) with tunable physical properties.However, no transport measurements associated with the topological surface states have been observed in these half-Heusler candidates due to the dominating contribution from bulk electrical conductance. Here we show that, by reducing the mobility of bulk carriers, a two-dimensional (2D) weak antilocalization (WAL) effect, one of the hallmarks of topological surface states, was experimentally revealed from the tilted magnetic field dependence of magnetoconductance in a topologically nontrivial semimetal LuPdBi. Besides the observation of a 2D WAL effect, a superconducting transition was revealed at Tc~1.7 K in the same bulk LuPdBi. Quantitative analysis within the framework of a generalized BCS theory leads to the conclusion that the noncentrosymmetric superconductivity of LuPdBi is fully gapped with a possibly unconventional pairing character. The co-existence of superconductivity and the transport signature of topological surface states in the same bulk alloy suggests that LuPdBi represents a very promising candidate as a topological superconductor.

cond-mat.str-el

Large Linear Magnetoresistance and Shubnikov-de Hass Oscillations in Single Crystals of YPdBi Heusler Topological Insulators

We report the observation of a large linear magnetoresistance (MR) and Shubnikov-de Hass (SdH) quantum oscillations in single crystals of YPdBi Heusler topological insulators. Owning to the successfully obtained the high-quality YPdBi single crystals, large non-saturating linear MR of as high as 350% at 5K and over 120% at 300 K under a moderate magnetic field of 7 T is observed. In addition to the large, field-linear MR, the samples exhibit pronounced SdH quantum oscillations at low temperature. Analysis of the SdH data manifests that the high-mobility bulk electron carriers dominate the magnetotransport and are responsible for the observed large linear MR in YPdBi crystals. These findings imply that the Heusler-based topological insulators have superiorities for investigating the novel quantum transport properties and developing the potential applications.

cond-mat.mtrl-sci

Thickness-dependent structural, magnetic and transport properties of epitaxial Co2FeAl Heusler alloy thin films

We report on a systematic study of the structural, magnetic properties and the anomalous Hall effect, in the Heusler alloy Co2FeAl (CFA) epitaxial films on MgO(001), as a function of film thickness. It was found that the epitaxial CFA films show a highly ordered B2 structure with an in-plane uniaxial magnetic anisotropy. An analysis of the electrical transport properties reveals that the lattice and magnon scattering contributions to the longitudinal resistivity. Independent on the thickness of films, the anomalous Hall resistivity of CFA films is found to be dominated by skew scattering only. Moreover, the anomalous Hall resistivity shows weakly temperature dependent behavior, and its absolute value increases as the thickness decreases. We attribute this temperature insensitivity in the anomalous Hall resistivity to the weak temperature dependent of tunneling spin-polarization in the CFA films, while the thickness dependence behavior is likely due to the increasing significance of interface or free surface electronic states.

cond-mat.mtrl-sci

Fabrication and characterization of the gapless half-Heusler YPtSb thin films

Half-Heusler YPtSb thin films were fabricated by magnetron co-sputtering method on MgO-buffered SiO2/Si(001) substrates. X-ray diffraction pattern and Energy dispersive X-ray spectroscopy confirmed the high-quality growth and stoichiometry. The temperature dependence of the resistivity shows a semiconducting-type behavior down to low temperature. The Hall mobility was determined to be 450 cm2/Vs at 300K, which is much higher than the bulk value (300 cm2/Vs). In-plane magnetoresistance (MR) measurements with fields applied along and perpendicular to the current direction show opposite MR signs, which suggests the possible existence of the topological surface states.

cond-mat.mtrl-sci

Magnetostructural Transformation and Magnetoresponsive Properties of MnNiGe1-xSnx Alloys

The martensitic and magnetic phase transformations in MnNiGe1-xSnx (0 \leq x \leq 0.200) alloys were investigated using X-ray diffraction (XRD), differential thermal analysis (DTA) and magnetization measurements. Results indicate that the increasing Sn substitution in MnNiGe1-xSnx results in (i) decrease of martensitic transformation temperature from 460 to 100 K and (ii) conversion of AFM spiral to antiparallel AFM strcuture in martensite. Based on these, the remarkable magnetic-field-induced PM/spiral-AFM and FM/AFM magnetostructural transformations and, large positive and negative magnetocaloric effects are obtained. The magnetoresponsive effects of MnNiGe1-xSnx alloys are enhanced by Sn substitution. A structural and magnetic phase diagram of MnNiGe1-xSnx alloys has been proposed.

cond-mat.mtrl-sci