arXiv subjects

Yin-Hai Li

Publications and source records attributed to Yin-Hai Li.

At least 19 recordsLinked to original sources

arXiv2026

Length-dependent SWIR upconversion spectral response of noncritically phase-matched KTP crystals

Noncritically phase-matched (NCPM) KTP crystals support large-aperture bulk operation, avoid spatial walk-off, and relax angular-alignment requirements, making them attractive for short-wave infrared upconversion detection. To guide crystal selection for different detection requirements, we quantitatively characterize how crystal length affects the coverage and profile of their external upconversion spectral responses. A calibrated Czerny--Turner monochromator is used to measure the responses of 0.5, 1.0, and 2.0 mm crystals and compare them with theoretical quantum-efficiency spectra calculated from the phase-matching model. With increasing crystal length, the response evolves from a broad profile with weak peak separation to a more distinct double-peak structure, accompanied by reduced coverage bandwidth. A representative pump-power measurement further yields the system-level external quantum-efficiency slope. These results clarify the trade-off between spectral coverage and wavelength selectivity for different crystal lengths and can be used to choose the crystal length for SWIR upconversion detection systems.

physics.optics↗

arXiv2026

Mid-infrared high-sensitive cavity-free in-situ CO gas sensing based on up-conversion detection

Carbon monoxide (CO) is a significant indicator gas with considerable application value in atmospheric monitoring, industrial production and medical diagnosis. Its fundamental vibrational band locates around 4.6 $\upmu$m and has larger absorption line strength than that of overtone band, which is more suitable for the precise identification and concentration detection of CO. In this paper, the up-conversion detection is employed to convert the mid-infrared absorption signal obtained by TDLAS to the visible light band, then a silicon-based detector is utilized for detection. By which, we can achieve the highest sensitivity of 79.6 ppb under the condition of cavity-free in-situ with an absorption range length of only 0.14 m. Furthermore, the single-photon level real-time detection of CO concentration after the diffuse reflection is realized by using SPAD. This work demonstrates the merits of the up-conversion detection in terms of its functionality at room temperature and capacity for sensitivity detection. Furthermore, it presents a design and optimization methodology that has the potential to underpin the advancement of the method towards more practical applications, like industrial process monitoring, medical diagnosis and so on.

physics.optics↗

arXiv2026

Broadband Tunable Photon-Pair Generation and Spectrum Measurement Based on Noncritical Lithium Niobate Crystals

Photon pairs play a vital role in modern science, driving extensive research into their generation. Yet, the narrow phase-matching bandwidth of conventional crystals has largely confined studies to specific wavelengths, leaving research on broadband tunable sources underexplored. Here, we employ a non-critical phase-matched lithium niobate (LN) crystal to generate widely tunable photon pairs. The generated near-infrared (NIR) photon pairs exhibit a high coincidence-to-accidental ratio (CAR > 20 dB) and are tunable across the 800-1600 nm range. We further showcase the utility of NIR photon pairs in spectroscopy by detecting carbon monoxide (CO) gas absorption. This approach will facilitate the design of advanced LN-based photonic experiments.

physics.optics↗

arXiv2026

Passive Incoherent Ultrafast Mid-Infrared Upconversion Imaging and Its Calibration

Ultrafast mid-infrared (MIR) imaging is a key enabling capability for monitoring transient thermal and plasma phenomena in scientific diagnostics and industrial safety. However, conventional cryogenic MIR cameras face a fundamental trade-off between frame rate, noise, and pixel format. Here we report a passive, incoherent MIR imaging platform that leverages sum-frequency upconversion in chirped periodically poled lithium niobate (CPLN) to translate broadband 3--5um scenes to the near-infrared, enabling ultrafast acquisition on a silicon-based intensified CCD (iCCD). In fast-kinetics mode we achieve a physical frame rate of 100kHz with microsecond-scale gate control, and we directly capture the full evolution of an air-breakdown electric arc, resolving its rapid ignition, expansion, and decay dynamics. Beyond demonstrating ultrafast passive imaging, we introduce a drift-aware calibration workflow based on Allan deviation analysis to quantitatively select the gate width and averaging strategy under realistic slow-drift and multiplicative noise. This combined capability -- ultrafast passive MIR imaging plus operationally meaningful calibration -- provides a practical route toward real-time thermal surveillance and early-warning systems for hazardous fast transients.

physics.optics↗

arXiv2025

Widely tunable cavity-enhanced backward difference-frequency generation

Difference-frequency generation (DFG) is a powerful technique for generating widely tunable infrared radiation. However, conventional phase-matching schemes may require tuning multiple parameters-such as the wavelengths, crystal temperature, crystal angle, and poling period-to achieve wide tunability, which increases the complexity of practical operation. In this work, we employ a backward quasi-phase-matching scheme with distinctive tuning characteristics and demonstrate pump-enhanced continuous-wave DFG output tunable from 1751 nm to 2451 nm (700 nm range) in a bulk crystal. The tuning is achieved solely by varying the pump wavelength and the signal wavelength (less than 5 nm), enabling continuous, rapid, and room-temperature operation. The tuning characteristics, power-scaling behavior, and output stability are experimentally verified with the idler wavelength set at 2000 nm. The approach offers a new paradigm for widely tunable infrared radiation generation and holds promise for applications in spectroscopy and biomedical sensing.

physics.optics↗

arXiv2025

Observation of tuning properties in a doubly resonant backward optical parametric oscillator

Doubly resonant optical parametric oscillators (OPOs) under continuous wave (CW) pumping are particularly notable for their low threshold and narrow linewidth. Backward OPOs (BOPOs) realized through backward quasi-phase matching which exhibit unique tuning properties compared with conventional forward OPOs have been demonstrated under pulse pumping. In this work, a doubly resonant BOPO was implemented in a semi-monolithic cavity under CW pumping, and its tuning properties were characterized. By tuning the pump wavelength, the forward and backward waves exhibited tuning ranges of 56.85 nm and 0.89 nm, respectively. Adjusting the crystal temperature resulted in tuning ranges of 59.7 GHz and 59.4 GHz for the forward and backward waves, respectively. This research establishes the BOPO as a promising candidate for applications in the field of CW OPOs.

physics.optics↗

arXiv2025

Generation of Near-ideal Indistinguishable Two-Photon State by Incoherent Light

High-quality quantum states lie at the heart of advanced quantum information processing. The degree of photon indistinguishability is critical for applications from photonic quantum computation to precision metrology. The two-photon Hong-Ou-Mandel (HOM) interference effect provides a rigorous quantification method, with its visibility serving as the ultimate benchmark for source quality. Generally, the coherent pumping is widely regarded as indispensable for the preparation of quantum sources. As a result, incoherent light sources have seen limited applications in the current quantum technologies. In this work, we generate an indistinguishable two-photon state by incoherent light generated by frequency doubling of Amplified Spontaneous Emission light. The theoretical analysis indicates that phase randomization of the pumping does not affect the coincidence visibility in two-photon intensity interference. Moreover, temporal incoherence further enhances the symmetry of the generated spectrum in second-harmonic generation. In the experiment, the incoherently pumped photon sources exhibit a heralding efficiency of approximately 60\% and a coincidence-to-accidental ratio exceeding 15000. The observed HOM interference fringes show the visibility of 99.1\% without any spectrum filtering, confirming the near-ideal indistinguishability of the photons. Our study reveals the role of temporal coherence in second-order nonlinear interactions, it provide a potential approach to use an easily accessible incoherent light for engineering high-quality quantum sources.

quant-ph↗

arXiv2025

High resolution up-conversion imaging in the 10 μm band under incoherent illumination

Long-wavelength infrared band exhibits significant utility in thermal signature acquisition and molecular spectral analysis, among other applications. The up-conversion detection technique enables effective signal transduction into the detection bandwidth of silicon-based photodetectors, thereby facilitating high-sensitivity photonic measurements. We realized high-resolution up-conversion imaging for incoherent thermal targets in the 10 μm spectral regime for the first time. Furthermore, this work presents the first derivation of analytical models characterizing depth of field and astigmatic aberration in up-conversion imaging systems, which show excellent agreement between theoretical and experimental results. The results demonstrate generalisability to various up-conversion imaging systems, thus providing critical insights for the design and optimisation of such systems.

physics.optics↗

arXiv2025

On Chip Quantum States Generation by Incoherent Light

On-chip quantum sources based on nonlinear processes are pivotal components in integrated photonics, driving significant advancements in quantum information technologies over recent decades. Usually, the pump coherence has been considered to be crucial for ensuring the quality of generated states, therefore incoherent light is rarely used in quantum information processing. In this work, we explore and reveal the constructive influence of pumped temporal incoherence on the quantum properties of photon sources. Taking silicon waveguides as nonlinear media, we theoretically show that temporal incoherence of light can improve pumping utilization efficiency, resulting in higher source brightness in a spontaneous four-wave mixing process, and the spectrally uncorrelated nature of incoherent light is transferred to the generated photon source, allowing high-purity state preparation. Experimentally, we obtain a higher photon pair generation rate and the lower heralded second-order autocorrelation with an Amplified Spontaneous Emission source. Additionally, we successfully generate a polarization-entangled state with Bell inequality violation of S = 2.64 and a fidelity of 95.7%. Our study reveals the mechanism behind incoherently pumped quantum states and presents a method for generating photon sources using an easily accessible incoherent light.

quant-ph↗

arXiv2024

Quantum key distribution based on mid-infrared and telecom band two-color entanglement source

Due to the high noise caused by solar background radiation, the existing satellite-based free-space quantum key distribution (QKD) experiments are mainly carried out at night, hindering the establishment of a practical all-day real-time global-scale quantum network. Given that the 3-5 μm mid-infrared (MIR) band has extremely low solar background radiation and strong scattering resistance, it is one of the ideal bands for free-space quantum communication. Here, firstly, we report on the preparation of a high-quality MIR (3370 nm) and telecom band (1555 nm) two-color polarization-entangled photon source, then we use this source to realize a principle QKD based on free-space and fiber hybrid channels in a laboratory. The theoretical analysis clearly shows that a long-distance QKD over 500 km of free-space and 96 km of fiber hybrid channels can be reached simultaneously. This work represents a significant step toward developing all-day global-scale quantum communication networks.

quant-ph↗

arXiv2024

Quantum-Enhanced Polarimetric Imaging

Polarimetric imaging, a technique that captures the invisible polarization-related properties of given materials, has broad applications from fundamental physics to advanced fields such as target recognition, stress detection, biomedical diagnosis and remote sensing. The introduction of quantum sources into classical imaging systems has demonstrated distinct advantages, yet few studies have explored their combination with polarimetric imaging. In this study, we present a quantum polarimetric imaging system that integrates polarization-entangled photon pairs into a polarizer-sample-compensator-analyzer (PSRA)-type polarimeter. Our system visualizes the birefringence properties of a periodical-distributed anisotropic material under decreasing illumination levels and diverse disturbing light sources. Compared to the classical system, the quantum approach reveals the superior sensitivity and robustness in low-light conditions, particularly useful in biomedical studies where the low illumination and non-destructive detection are urgently needed. The study also highlights the nonlocality of entangled photons in birefringence measurement, indicating the potential of quantum polarimetric system in the remote sensing domain.

physics.optics↗

arXiv2024

Effective multiband synthetic four-wave mixing by cascading quadratic processes

Four wave mixing (FWM) is an important way to generate supercontinuum and frequency combs in the mid-infrared band. Here, we obtain simultaneous synthetic FWM in the visible and mid-infrared bands by cascading quadratic nonlinear processes in a periodically poled lithium niobate crystal (PPLN), which has a 110dB(at 3000nm) higher conversion efficiency than the FWM directly generated by third-order susceptibilities in bulk PPLN crystals. A general model of this process is developed that is in full agreement with the experimental verifications. The frequency difference between the new frequency components can be freely tuned by changing the frequency difference of the dual pump lasers. Furthermore, by increasing the conversion bandwidth and efficiency of the cascaded processes, it is feasible to generate frequency combs in three bands the visible, near-infrared and mid-infrared bands simultaneously through high-order cascaded processes. This work opens up a new avenue toward free-tuning multiband frequency comb generation with multi-octaves frequency spanning, which will have significant applications in fields such as mid-infrared gas sensing, lidar and precision spectroscopy.

physics.optics↗

arXiv2024

Narrowband telecom band polarization-entangled photon source by superposed monolithic cavities

A high-quality narrowband polarization-entangled source in the telecom band is preferred to avoid frequency dispersion for long-distance transmission in optical fibers and to efficiently couple with telecom band quantum memories. Here, we report narrowband, telecom-band, polarization-entangled photon pair generation based on the superposition of single-longitudinal-mode photon pairs from two monolithic nonlinear crystal cavities in a passively stable interferometer based on beam displacers. The photon pairs generated from the cavities exhibit a high coincidence to accidental coincidence ratio of 20000 and a bandwidth below 500 MHz. Two-photon polarization interference, Bell-inequality, and quantum state tomography are performed to indicate the high quality of the entangled source. The current configuration demonstrates greater stability than traditional free space cavity-enhanced polarization-entangled state generation, which is promising for quantum communication applications.

quant-ph↗

arXiv2024

Polarization entanglement by two simultaneous backward phase-matching processes in a single crystal

Entanglement enables many promising applications in quantum technology. Devising new generation methods and harnessing entanglement are prerequisites for practical applications. Here we realize a distinct polarization-entangled source by simultaneously achieving type-0 and type-I backward quasi-phase matching (BQPM) through spontaneous parametric down-conversion in a single bulk crystal, which is different from all previous entangled-source configurations. Pumping the crystal with a single polarized beam generates a non-maximally polarization-entangled state, which can be further projected to a maximal Bell state with a pair of Brewster windows. Hong-Ou-Mandel interference experiments are done on polarization-degenerate photon pairs for both type-0 and type-I BQPM processes for the first time. The emitted photons in both processes have a bandwidth as narrow as 15.7 GHz. The high quality of this source is characterized by various methods. The rather simple configuration, narrow bandwidth, and high entanglement quality make the source very promising for many quantum information tasks.

quant-ph↗

arXiv2024

Quantum entanglement enabled ellipsometer for phase retardance measurement

An ellipsometer is a vital precision tool used for measuring optical parameters with wide applications in many fields, including accurate measurements in film thickness, optical constants, structural profiles, etc. However, the precise measurement of photosensitive materials meets huge obstacles because of the excessive input photons, therefore the requirement of enhancing detection accuracy under low incident light intensity is an essential topic in the precision measurement. In this work, by combining a polarization-entangled photon source with a classical transmission-type ellipsometer, the quantum ellipsometer with the PSA (Polarizer-Sample-Analyzer) and the Senarmount method is constructed firstly to measure the phase retardation of the birefringent materials. The experimental results show that the accuracy can reach to nanometer scale at extremely low input intensity, and the stability are within 1% for all specimens tested with a compensator involved. Our work paves the way for precision measurement at low incident light intensity, with potential applications in measuring photosensitive materials, active-biological samples and other remote monitoring scenarios.

quant-ph↗

arXiv2023

Mid-Infrared Upconversion Imaging Under Different Illumination Conditions

Converting the medium infrared field to the visible band is an effective image detection method. We propose a comprehensive theory of image up-conversion under continuous optical pumping, and discuss the relationship between the experimental parameters and imaging field of view, resolution, quantum efficiency, and conversion bandwidth. Theoretical predictions of upconversion imaging results are given based on numerical simulations, which show good agreement with experimental results. In particular, coherent and incoherent light illumination are studied separately and the advantages and disadvantages of their imaging performance are compared and analysed. This work provides a study of the upconversion image detection performance of the system, which is of great value in guiding the design of the detection system and bringing it to practical applications.

physics.optics↗

arXiv2023

Thermal camera based on frequency upconversion and its noise-equivalent temperature difference characterization

We present a scheme for estimating the noise-equivalent temperature difference (NETD) of frequency upconversion detectors (UCDs) that detect mid-infrared (MIR) light. In particular, this letter investigates the frequency upconversion of a periodically polarized crystal based on lithium niobate, where a mid-infrared conversion bandwidth of 220 nm can be achieved in a single poled period by a special design. Experimentally for a temperature target with a central wavelength of 7.89 μm in mid-infrared radiation, we estimated the NETD of the device to be 56 mK. Meanwhile, a direct measurement of the NETD was performed utilizing conventional methods, which resulted in 48 mK. We also compared the NETD of our UCD with commercially available direct mid-infrared detectors. Here, we showed that the limiting factor for further NETD reduction of our device is not primarily from the upconversion process and camera noise, but from the limitations of the heat source performance. Our detectors have good temperature measurement performance and can be used for a variety of applications involving temperature object identification and material structure detection.

physics.optics↗

arXiv2022

Harmonics-assisted optical phase amplifier

The change in the relative phase between two light fields serves as a basic principle for the measurement of the physical quantity that guides this change. It would therefore be highly advantageous if the relative phase could be amplified to enhance the measurement resolution. One well-known method for phase amplification involves the use of the multi-photon number and path entangled state known as the NOON state; however, a high-number NOON state is very difficult to prepare and is highly sensitive to optical losses. Here we propose and experimentally demonstrate in principle a phase amplifier scheme with the assistance of a harmonic generation process. The relative phase difference between two polarization modes in a polarized interferometer is amplified coherently four times with cascaded second-harmonic generation processes. We demonstrate that these amplification processes can be recycled and therefore have the potential to realize much higher numbers of multiple amplification steps. The phase amplification method presented here shows considerable advantages over the method based on NOON states and will be highly promising for use in precision optical measurements.

physics.optics↗