Searcharxiv⌕ Search

arXiv subjects

Yinan Zhang

Publications and source records attributed to Yinan Zhang.

45 records · Page 3Linked to original sources

Demonstration of high-Q TE-TM photonic crystal nanobeam cavities

We experimentally demonstrate high Quality factor dual-polarized TE-TM photonic crystal nanobeam cavities. The free-standing nanobeams are fabricated in a 500 nm thick silicon layer, and are probed using both tapered optical fiber and free-space resonant scattering set-ups. We measure Q-factors greater than 10^4 for both TM and TE modes, and observe large fiber transmission drops (0.3 -- 0.4) at the TM mode resonances.

physics.optics↗

Fabrication of Diamond Nanowires for Quantum Information Processing Applications

We present a design and a top-down fabrication method for realizing diamond nanowires in both bulk single crystal and polycrystalline diamond. Numerical modeling was used to study coupling between a Nitrogen Vacancy (NV) color center and optical modes of a nanowire, and to find an optimal range of nanowire diameters that allows for large collection efficiency of emitted photons. Inductively coupled plasma (ICP) reactive ion etching (RIE) with oxygen is used to fabricate the nanowires. Drop-casted nanoparticles (including $\mathrm{Au}$, $\mathrm{SiO_{2}}$ and $\mathrm{Al_2O_3}$) as well as electron beam lithography defined spin-on glass and evaporated $\mathrm{Au}$ have been used as an etch mask. We found $\mathrm{Al_2O_3}$ nanoparticles to be the most etch resistant. At the same time FOx e-beam resist (spin-on glass) proved to be a suitable etch mask for fabrication of ordered arrays of diamond nanowires. We were able to obtain nanowires with near vertical sidewalls in both polycrystalline and single crystal diamond. The heights and diameters of the polycrystalline nanowires presented in this paper are $\unit[\approx1]{μm}$ and $\unit[120-340]{nm}$, respectively, having a $\unit[200]{nm/min}$ etch rate. In the case of single crystal diamond (types Ib and IIa) nanowires the height and diameter for different diamonds and masks shown in this paper were $\unit[1-2.4]{μm}$ and $\unit[120-490]{nm}$ with etch rates between $\unit[190-240]{nm/min}$.

quant-ph↗

Photonic crystal nanobeam lasers

Photonic crystal lasers operating at room temperature based on high Q/V nanobeam cavities have been demonstrated. We reported a large spontaneous emission factor (~0.97) by fitting the L-L curve with the rate equations.

physics.optics↗

A Diamond Nanowire Single Photon Antenna

The development of a robust light source that emits one photon at a time is an outstanding challenge in quantum science and technology. Here, at the transition from many to single photon optical communication systems, fully quantum mechanical effects may be utilized to achieve new capabilities, most notably perfectly secure communication via quantum cryptography. Practical implementations place stringent requirements on the device properties, including stable photon generation, room temperature operation, and efficient extraction of many photons. Single photon light emitting devices based on fluorescent dye molecules, quantum dots, and carbon nanotube material systems have all been explored, but none have simultaneously demonstrated all criteria. Here, we describe the design, fabrication, and characterization of a bright source of single photons consisting of an individual Nitrogen-vacancy color center (NV center) in a diamond nanowire operating in ambient conditions. The nanowire plays a positive role in increasing the number of single photons collected from the NV center by an order of magnitude over devices based on bulk diamond crystals, and allows operation at an order of magnitude lower power levels. This result enables a new class of nanostructured diamond devices for room temperature photonic and quantum information processing applications, and will also impact fields as diverse as biological and chemical sensing, opto-mechanics, and scanning-probe microscopy.

quant-ph↗

Efficient Terahertz Generation in Triply Resonant Nonlinear Photonic Crystal Microcavities

We propose a scheme for efficient cavity-enhanced nonlinear THz generation via difference-frequency generation (DFG) processes using a triply resonant system based on photonic crystal cavities. We show that high nonlinear overlap can be achieved by coupling a THz cavity to a doubly-resonant, dual-polarization near-infrared (e.g. telecom band) photonic-crystal nanobeam cavity, allowing the mixing of three mutually orthogonal fundamental cavity modes through a chi(2) nonlinearity. We demonstrate through coupled-mode theory that complete depletion of the pump frequency - i.e., quantum-limited conversion - is possible in an experimentally feasible geometry, with the operating output power at the point of optimal total conversion efficiency adjustable by varying the mode quality (Q) factors.

physics.optics↗

Ultra-high-Q TE/TM dual-polarized photonic crystal nanocavities

We demonstrate photonic crystal nanobeam cavities that support both TE- and TM-polarized modes, each with a Quality factor greater than one million and a mode volume on the order of the cubic wavelength. We show that these orthogonally polarized modes have a tunable frequency separation and a high nonlinear spatial overlap. We expect these cavities to have a variety of applications in resonance-enhanced nonlinear optics.

physics.optics↗

Broad-band spectral control of single photon sources using a nonlinear photonic crystal cavity

Motivated by developments in quantum information science, much recent effort has been directed toward coupling individual quantum emitters to optical microcavities. Such systems can be used to produce single photons on demand, enable nonlinear optical switching at a single photon level, and implement functional nodes of a quantum network, where the emitters serve as processing nodes and photons are used for long-distance quantum communication. For many of these practical applications, it is important to develop techniques that allow one to generate outgoing single photons of desired frequency and bandwidth, enabling hybrid networks connecting different types of emitters and long-distance transmission over telecommunications wavelengths. Here, we propose a novel approach that makes use of a nonlinear optical resonator, in which the single photon originating from the atom-like emitter is directly converted into a photon with desired frequency and bandwidth using the intracavity nonlinearity. As specific examples, we discuss a high-finesse, TE-TM double-mode photonic crystal cavity design that allows for direct generation of single photons at telecom wavelengths starting from an InAs/GaAs quantum dot with a 950 nm transition wavelength, and a scheme for direct optical coupling of such a quantum dot with a diamond nitrogen-vacancy center at 637 nm.

quant-ph↗

Difference-frequency generation with quantum-limited efficiency in triply-resonant nonlinear cavities

We present a comprehensive study of second-order nonlinear difference frequency generation in triply resonant cavities using a theoretical framework based on coupled-mode theory. We show that optimal quantum-limited conversion efficiency can be achieved at any pump power when the powers at the pump and idler frequencies satisfy a critical relationship. We demonstrate the existence of a broad parameter range in which all triply-resonant DFG processes exhibit monostable conversion. We also demonstrate the existence of a geometry-dependent bistable region.

physics.optics↗

Sub-micron diameter micropillar cavities with high Quality factors and ultra-small mode volumes

We theoretically demonstrate high Quality factor micropillar cavities with record low mode volumes based on the TiO2/SiO2 material system. The proposed cavities have Q/V three orders of magnitude larger than previously reported ones. We show that our cavity embedded with diamond nanocrystal provides a feasible platform for cavity quantum electrodynamics experiments in the strong coupling limit.

physics.optics↗