arXiv subjects

Ying-Chang Liang

Publications and source records attributed to Ying-Chang Liang.

At least 37 records · Page 2Linked to original sources

arXiv2025

AIGC-assisted Federated Learning for Edge Intelligence: Architecture Design, Research Challenges and Future Directions

Federated learning (FL) can fully leverage large-scale terminal data while ensuring privacy and security, and is considered as a distributed alternative for the centralized machine learning. However, the issue of data heterogeneity poses limitations on FL's performance. To address this challenge, artificial intelligence-generated content (AIGC) which is an innovative data synthesis technique emerges as one potential solution. In this article, we first provide an overview of the system architecture, performance metrics, and challenges associated with AIGC-assistant FL system design. We then propose the Generative federated learning (GenFL) architecture and present its workflow, including the design of aggregation and weight policy. Finally, using the CIFAR10 and CIFAR100 datasets, we employ diffusion models to generate dataset and improve FL performance. Experiments conducted under various non-independent and identically distributed (non-IID) data distributions demonstrate the effectiveness of GenFL on overcoming the bottlenecks in FL caused by data heterogeneity. Open research directions in the research of AIGC-assisted FL are also discussed.

cs.LG↗

arXiv2025

User Association and Coordinated Beamforming in Cognitive Aerial-Terrestrial Networks: A Safe Reinforcement Learning Approach

Cognitive aerial-terrestrial networks (CATNs) offer a solution to spectrum scarcity by sharing spectrum between aerial and terrestrial networks. However, aerial users (AUs) experience significant interference from numerous terrestrial base stations (BSs). To alleviate such interference, we investigate a user association and coordinated beamforming (CBF) problem in CATN, where the aerial network serves as the primary network sharing its spectrum with the terrestrial network. Specifically, we maximize the sum rate of the secondary terrestrial users (TUs) under the interference temperature constraints of the AUs. Traditional iterative optimization schemes are impractical due to their high computational complexity and information exchange overhead. Although deep reinforcement learning (DRL) based schemes can address these challenges, their performance is sensitive to the weights of the weighted penalty terms for violating constraints in the reward function. Motivated by these issues, we propose a safe DRL-based user association and CBF scheme for CATN, eliminating the need for training multiple times to find the optimal penalty weight before actual deployment. Specifically, the CATN is modeled as a networked constrained partially observable Markov game. Each TU acts as an agent to choose its associated BS, and each BS acts as an agent to decide its beamforming vectors, aiming to maximize the reward while satisfying the safety constraints introduced by the interference constraints of the AUs. By exploiting a safe DRL algorithm, the proposed scheme incurs lower deployment expenses than the penalty-based DRL schemes since only one training is required before actual deployment. Simulation results show that the proposed scheme can achieve a higher sum rate of TUs than a two-stage optimization scheme while the average received interference power of the AUs is generally below the threshold.

cs.IT↗

arXiv2025

Age-Based Device Selection and Transmit Power Optimization in Over-the-Air Federated Learning

Recently, over-the-air federated learning (FL) has attracted significant attention for its ability to enhance communication efficiency. However, the performance of over-the-air FL is often constrained by device selection strategies and signal aggregation errors. In particular, neglecting straggler devices in FL can lead to a decline in the fairness of model updates and amplify the global model's bias toward certain devices' data, ultimately impacting the overall system performance. To address this issue, we propose a joint device selection and transmit power optimization framework that ensures the appropriate participation of straggler devices, maintains efficient training performance, and guarantees timely updates. First, we conduct a theoretical analysis to quantify the convergence upper bound of over-the-air FL under age-of-information (AoI)-based device selection. Our analysis further reveals that both the number of selected devices and the signal aggregation errors significantly influence the convergence upper bound. To minimize the expected weighted sum peak age of information, we calculate device priorities for each communication round using Lyapunov optimization and select the highest-priority devices via a greedy algorithm. Then, we formulate and solve a transmit power and normalizing factor optimization problem for selected devices to minimize the time-average mean squared error (MSE). Experimental results demonstrate that our proposed method offers two significant advantages: (1) it reduces MSE and improves model performance compared to baseline methods, and (2) it strikes a balance between fairness and training efficiency while maintaining satisfactory timeliness, ensuring stable model performance.

cs.NI↗

arXiv2024

When Graph Meets Retrieval Augmented Generation for Wireless Networks: A Tutorial and Case Study

The rapid development of next-generation networking technologies underscores their transformative role in revolutionizing modern communication systems, enabling faster, more reliable, and highly interconnected solutions. However, such development has also brought challenges to network optimizations. Thanks to the emergence of Large Language Models (LLMs) in recent years, tools including Retrieval Augmented Generation (RAG) have been developed and applied in various fields including networking, and have shown their effectiveness. Taking one step further, the integration of knowledge graphs into RAG frameworks further enhanced the performance of RAG in networking applications such as Intent-Driven Networks (IDNs) and spectrum knowledge maps by providing more contextually relevant responses through more accurate retrieval of related network information. This paper introduces the RAG framework that integrates knowledge graphs in its database and explores such framework's application in networking. We begin by exploring RAG's applications in networking and the limitations of conventional RAG and present the advantages that knowledge graphs' structured knowledge representation brings to the retrieval and generation processes. Next, we propose a detailed GraphRAG-based framework for networking, including a step-by-step tutorial on its construction. Our evaluation through a case study on channel gain prediction demonstrates GraphRAG's enhanced capability in generating accurate, contextually rich responses, surpassing traditional RAG models. Finally, we discuss key future directions for applying knowledge-graphs-empowered RAG frameworks in networking, including robust updates, mitigation of hallucination, and enhanced security measures for networking applications.

cs.NI↗

arXiv2024

Collaborative Deep Reinforcement Learning for Resource Optimization in Non-Terrestrial Networks

Non-terrestrial networks (NTNs) with low-earth orbit (LEO) satellites have been regarded as promising remedies to support global ubiquitous wireless services. Due to the rapid mobility of LEO satellite, inter-beam/satellite handovers happen frequently for a specific user equipment (UE). To tackle this issue, earth-fixed cell scenarios have been under studied, in which the LEO satellite adjusts its beam direction towards a fixed area within its dwell duration, to maintain stable transmission performance for the UE. Therefore, it is required that the LEO satellite performs real-time resource allocation, which however is unaffordable by the LEO satellite with limited computing capability. To address this issue, in this paper, we propose a two-time-scale collaborative deep reinforcement learning (DRL) scheme for beam management and resource allocation in NTNs, in which LEO satellite and UE with different control cycles update their decision-making policies through a sequential manner. Specifically, UE updates its policy subject to improving the value functions of both the agents. Furthermore, the LEO satellite only makes decisions through finite-step rollouts with a reference decision trajectory received from the UE. Simulation results show that the proposed scheme can effectively balance the throughput performance and computational complexity over traditional greedy-searching schemes.

eess.SP↗

arXiv2024

Collaborative Computing in Non-Terrestrial Networks: A Multi-Time-Scale Deep Reinforcement Learning Approach

Constructing earth-fixed cells with low-earth orbit (LEO) satellites in non-terrestrial networks (NTNs) has been the most promising paradigm to enable global coverage. The limited computing capabilities on LEO satellites however render tackling resource optimization within a short duration a critical challenge. Although the sufficient computing capabilities of the ground infrastructures can be utilized to assist the LEO satellite, different time-scale control cycles and coupling decisions between the space- and ground-segments still obstruct the joint optimization design for computing agents at different segments. To address the above challenges, in this paper, a multi-time-scale deep reinforcement learning (DRL) scheme is developed for achieving the radio resource optimization in NTNs, in which the LEO satellite and user equipment (UE) collaborate with each other to perform individual decision-making tasks with different control cycles. Specifically, the UE updates its policy toward improving value functions of both the satellite and UE, while the LEO satellite only performs finite-step rollout for decision-makings based on the reference decision trajectory provided by the UE. Most importantly, rigorous analysis to guarantee the performance convergence of the proposed scheme is provided. Comprehensive simulations are conducted to justify the effectiveness of the proposed scheme in balancing the transmission performance and computational complexity.

eess.SP↗

arXiv2024

Integrated Distributed Semantic Communication and Over-the-air Computation for Cooperative Spectrum Sensing

Cooperative spectrum sensing (CSS) is a promising approach to improve the detection of primary users (PUs) using multiple sensors. However, there are several challenges for existing combination methods, i.e., performance degradation and ceiling effect for hard-decision fusion (HDF), as well as significant uploading latency and non-robustness to noise in the reporting channel for soft-data fusion (SDF). To address these issues, an integrated communication and computation (ICC) framework is proposed in this paper. Specifically, distributed semantic communication (DSC) jointly optimizes multiple sensors and the fusion center to minimize the transmitted data without degrading detection performance. Moreover, over-the-air computation (AirComp) is utilized to further reduce spectrum occupation in reporting channel, taking advantage of characteristics of wireless channel to enable data aggregation. Under the ICC framework, a particular system, namely ICC-CSS, is designed and implemented, which is theoretically proved to be equivalent to the optimal estimator-correlator (E-C) detector with equal gain SDF when the PU signal samples are independent and identically distributed. Extensive simulations verify the superiority of ICC-CSS compared with various conventional CSS schemes in terms of detection performance, robustness to SNR variations in both sensing and reporting channels, as well as scalability with respect to the number of samples and sensors.

eess.SP↗

arXiv2024

Delay Alignment Modulation with Hybrid Analog/Digital Beamforming for Millimeter Wave and Terahertz Communications

For millimeter wave (mmWave) or Terahertz (THz) communications, by leveraging the high spatial resolution offered by large antenna arrays and the multi-path sparsity of mmWave/THz channels, a novel inter-symbol interference (ISI) mitigation technique called delay alignment modulation (DAM) has been recently proposed. The key ideas of DAM are delay pre-compensation and path-based beamforming. However, existing research on DAM is mainly based on fully digital beamforming, which requires the number of radio frequency (RF) chains to be equal to the number of antennas. This paper proposes the hybrid analog/digital beamforming based DAM, including both fully and partially connected structures. The analog and digital beamforming matrices are designed to achieve performance close to DAM based on fully digital beamforming. While DAM was considered for the path-based channel model with integer delays in the previous work, this paper extends DAM to a more general tap-based model that accounts for fractional path delays. To further reduce the cost of channel estimation and improve the performance for wireless channels with fractional delays, DAM with codebook-based beam alignment and DAM-orthogonal frequency division multiplexing (DAM-OFDM) with hybrid beamforming are proposed. The effectiveness of the proposed techniques is verified by extensive simulation results.

eess.SP↗

arXiv2024

Multi-Antenna Broadband Backscatter Communications

Backscatter communication offers a promising solution to connect massive Internet-of-Things (IoT) devices with low cost and high energy efficiency. Nevertheless, its inherently passive nature limits transmission reliability, thereby hindering improvements in communication range and data rate. To overcome these challenges, we introduce a bistatic broadband backscatter communication (BBBC) system, which equips the backscatter device (BD) with multiple antennas. In the proposed BBBC system, a radio frequency (RF) source directs a sinusoidal signal to the BD, facilitating single-carrier block transmission at the BD. Meanwhile, without requiring channel state information (CSI), cyclic delay diversity (CDD) is employed at the multi-antenna BD to enhance transmission reliability through additional cyclically delayed backscattered signals. We also propose a receiver design that includes preprocessing of the time-domain received signal, pilot-based parameter estimation, and frequency-domain equalization, enabling low-complexity detection of the backscattered signal. Leveraging the matched filter bound (MFB), we analyze the achievable diversity gains in terms of outage probability. Our analysis reveals that spatial diversity is achievable under general Rayleigh fading conditions, and both frequency and spatial diversity are attainable in scenarios where the forward link experiences a line-of-sight (LoS) channel. Simulation results validate the effectiveness of the proposed BBBC system. As the number of BD antennas increases, our results show that the proposed scheme not only enhances array gain but also improves diversity order, significantly reducing both outage probability and bit error rate (BER). Consequently, it outperforms conventional schemes that yield only minor gains.

cs.IT↗

arXiv2024

On the Capacity Region of Reconfigurable Intelligent Surface Assisted Symbiotic Radios

In this paper, we are interested in a reconfigurable intelligent surface (RIS)-assisted symbiotic radio (SR) system, where an RIS assists a primary transmission by passive beamforming and simultaneously acts as an information transmitter by periodically adjusting its reflection coefficients. The above RIS functions innately enable a new multiplicative multiple access channel (M-MAC), where the primary and secondary signals are superposed in a multiplicative manner. To pursue the fundamental performance limits of M-MAC, we focus on the characterization of the capacity region for such a system when the direct link is blocked. Due to the reflection nature of RIS, the signal transmitted from the RIS should satisfy a passive reflection constraint. We consider two types of passive reflection constraints, one for the case that only the phases of the RIS can be adjusted, while the other for the case that both the amplitude and the phase can be adjusted. Under the passive reflection constraints at the RIS as well as the average power constraint at the primary transmitter (PTx), we characterize the capacity region of RIS-assisted SR. It is observed that: 1) the number of sum-rate-optimal points on the boundary of the capacity region is infinite; 2) for the rate pairs with the maximum sum rate, the optimal distribution of the amplitude of the primary signal is a continuous Rayleigh distribution, while for the remaining rate pairs on the capacity region boundary, the optimal amplitude of the primary signal is discrete; 3) the adjustment of the amplitude for the RIS can enlarge the capacity region as compared to the phase-adjusted-only case.

cs.IT↗

arXiv2024

Modulation Design and Optimization for RIS-Assisted Symbiotic Radios

In reconfigurable intelligent surface (RIS)-assisted symbiotic radio (SR), the RIS acts as a secondary transmitter by modulating its information bits over the incident primary signal and simultaneously assists the primary transmission, then a cooperative receiver is used to jointly decode the primary and secondary signals. Most existing works of SR focus on using RIS to enhance the reflecting link while ignoring the ambiguity problem for the joint detection caused by the multiplication relationship of the primary and secondary signals. Particularly, in case of a blocked direct link, joint detection will suffer from severe performance loss due to the ambiguity, when using the conventional on-off keying and binary phase shift keying modulation schemes for RIS. To address this issue, we propose a novel modulation scheme for RIS-assisted SR that divides the phase-shift matrix into two components: the symbol-invariant and symbol-varying components, which are used to assist the primary transmission and carry the secondary signal, respectively. To design these two components, we focus on the detection of the composite signal formed by the primary and secondary signals, through which a problem of minimizing the bit error rate (BER) of the composite signal is formulated to improve both the BER performance of the primary and secondary ones. By solving the problem, we derive the closed-form solution of the optimal symbol-invariant and symbol-varying components, which is related to the channel strength ratio of the direct link to the reflecting link. Moreover, theoretical BER performance is analyzed. Finally, simulation results show the superiority of the proposed modulation scheme over its conventional counterpart.

cs.IT↗

arXiv2024

Active Reconfigurable Intelligent Surface Enhanced Spectrum Sensing for Cognitive Radio Networks

In opportunistic cognitive radio networks, when the primary signal is very weak compared to the background noise, the secondary user requires long sensing time to achieve a reliable spectrum sensing performance, leading to little remaining time for the secondary transmission. To tackle this issue, we propose an active reconfigurable intelligent surface (RIS) assisted spectrum sensing system, where the received signal strength from the interested primary user can be enhanced and underlying interference within the background noise can be mitigated as well. In comparison with the passive RIS, the active RIS can not only adapt the phase shift of each reflecting element but also amplify the incident signals. Notably, we study the reflecting coefficient matrix (RCM) optimization problem to improve the detection probability given a maximum tolerable false alarm probability and limited sensing time. Then, we show that the formulated problem can be equivalently transformed to a weighted mean square error minimization problem using the principle of the well-known weighted minimum mean square error (WMMSE) algorithm, and an iterative optimization approach is proposed to obtain the optimal RCM. In addition, to fairly compare passive RIS and active RIS, we study the required power budget of the RIS to achieve a target detection probability under a special case where the direct links are neglected and the RIS-related channels are line-of-sight. Via extensive simulations, the effectiveness of the WMMSE-based RCM optimization approach is demonstrated. Furthermore, the results reveal that the active RIS can outperform the passive RIS when the underlying interference within the background noise is relatively weak, whereas the passive RIS performs better in strong interference scenarios because the same power budget can support a vast number of passive reflecting elements for interference mitigation.

cs.IT↗

arXiv2024

Over-the-Air Modulation for RIS-assisted Symbiotic Radios: Design, Analysis, and Optimization

In reconfigurable intelligent surface (RIS)-assisted symbiotic radio (SR), an RIS is exploited to assist the primary system and to simultaneously operate as a secondary transmitter by modulating its own information over the incident primary signal from the air. Such an operation is called over-the-air modulation. The existing modulation schemes such as on-off keying and binary phase-shift keying suffer from two problems for joint detection of the primary and secondary signals in RIS-assisted SR, i.e., one is the detection ambiguity problem when the direct link is blocked, and the other is the bit error rate (BER) error-floor problem when the direct link is weak. To address the two problems, we propose a novel modulation scheme by dividing the phase-shift matrix into two parts: one is the assistance beamforming matrix for assisting the primary system and the other is the transmission beamforming matrix for delivering the secondary signal. To optimize the assistance and transmission beamforming matrices, we first introduce an assistance factor that describes the performance requirement of the primary system and then formulate a problem to minimize the BER of the secondary system, while guaranteeing the BER requirement of the primary system controlled by the assistance factor. To solve this non-convex problem, we resort to the successive convex approximation technique to obtain a suboptimal solution. Furthermore, to draw more insights, we propose a low-complexity assistance-transmission beamforming structure by borrowing the idea from the classical maximum ratio transmission and zero forcing techniques. Finally, simulation results reveal an interesting tradeoff between the BER performance of the primary and secondary systems by adjusting the assistance factor.

cs.IT↗

arXiv2024

Towards Symbiotic SAGIN Through Inter-operator Resource and Service Sharing: Joint Orchestration of User Association and Radio Resources

The space-air-ground integrated network (SAGIN) is a pivotal architecture to support ubiquitous connectivity in the upcoming 6G era. Inter-operator resource and service sharing is a promising way to realize such a huge network, utilizing resources efficiently and reducing construction costs. Given the rationality of operators, the configuration of resources and services in SAGIN should focus on both the overall system performance and individual benefits of operators. Motivated by emerging symbiotic communication facilitating mutual benefits across different radio systems, we investigate the resource and service sharing in SAGIN from a symbiotic communication perspective in this paper. In particular, we consider a SAGIN consisting of a ground network operator (GNO) and a satellite network operator (SNO). Specifically, we aim to maximize the weighted sum rate (WSR) of the whole SAGIN by jointly optimizing the user association, resource allocation, and beamforming. Besides, we introduce a sharing coefficient to characterize the revenue of operators. Operators may suffer revenue loss when only focusing on maximizing the WSR. In pursuit of mutual benefits, we propose a mutual benefit constraint (MBC) to ensure that each operator obtains revenue gains. Then, we develop a centralized algorithm based on the successive convex approximation (SCA) method. Considering that the centralized algorithm is difficult to implement, we propose a distributed algorithm based on Lagrangian dual decomposition and the consensus alternating direction method of multipliers (ADMM). Finally, we provide extensive numerical simulations to demonstrate the effectiveness of the two proposed algorithms, and the distributed optimization algorithm can approach the performance of the centralized one.

cs.IT↗

arXiv2024

Power-Aware Sparse Reflect Beamforming in Active RIS-aided Interference Channels

Active reconfigurable intelligent surface (RIS) has attracted significant attention in wireless communications, due to its reflecting elements (REs) capable of reflecting incident signals with not only phase shifts but also amplitude amplifications. In this paper, we are interested in active RIS-aided interference channels in which $K$ user pairs share the same time and frequency resources with the aid of active RIS. Thanks to the promising amplitude amplification capability, activating a moderate number of REs, rather than all of them, is sufficient for the active RIS to mitigate cross-channel interferences. Motivated by this, we propose a power-aware sparse reflect beamforming design for the active RIS-aided interference channels, which allows the active RIS to flexibly adjust the number of activated REs for the sake of reducing hardware and power costs. Specifically, we establish the power consumption model in which only those activated REs consume the biasing and operation power that supports the amplitude amplification, yielding an $\ell_0$-norm power consumption function. Based on the proposed model, we investigate a sum-rate maximization problem and an active RIS power minimization problem by carefully designing the sparse reflect beamforming vector. To solve these problems, we first replace the nonconvex $\ell_0$-norm function with an iterative reweighted $\ell_1$-norm function. Then, fractional programming is used to solve the sum-rate maximization, while semidefinite programming together with the difference-of-convex algorithm (DCA) is used to solve the active RIS power minimization. Numerical results show that the proposed sparse designs can notably increase the sum rate of user pairs and decrease the power consumption of active RIS in interference channels.

cs.IT↗

arXiv2023

Hierarchical Cognitive Spectrum Sharing in Space-Air-Ground Integrated Networks

In space-air-ground integrated networks (SAGINs), cognitive spectrum sharing has been regarded as a promising solution to improve spectrum efficiency by enabling a secondary network to access the spectrum of a primary network. However, different networks in SAGIN may have different quality of service (QoS) requirements, which can not be well satisfied with the traditional cognitive spectrum sharing architecture. For example, the aerial network typically has high QoS requirements, which however may not be met when it acts as a secondary network. To address this issue, in this paper, we propose a hierarchical cognitive spectrum sharing architecture (HCSSA) for SAGINs, where the secondary networks are divided into a preferential one and an ordinary one. Specifically, the aerial and terrestrial networks can access the spectrum of the satellite network under the condition that the caused interference to the satellite terminal is below a certain threshold. Besides, considering that the aerial network has a higher priority than the terrestrial network, we aim to use a rate constraint to ensure the performance of the aerial network. Subject to these two constraints, we consider a sum-rate maximization for the terrestrial network by jointly optimizing the transmit beamforming vectors of the aerial and terrestrial base stations. To solve this non-convex problem, we propose a penalty-based iterative beamforming (PIBF) scheme that uses the penalty method and the successive convex approximation technique. Moreover, we also develop three low-complexity schemes by optimizing the normalized beamforming vectors and power control. Finally, we provide extensive numerical simulations to compare the performance of the proposed PIBF scheme and the low-complexity schemes. The results also demonstrate the advantages of the proposed HCSSA compared with the traditional cognitive spectrum sharing architecture.

eess.SP↗

arXiv2023

Multi-User Multi-IoT-Device Symbiotic Radio: A Novel Massive Access Scheme for Cellular IoT

Symbiotic radio (SR) is a promising technique to support cellular Internet-of-Things (IoT) by forming a mutualistic relationship between IoT and cellular transmissions. In this paper, we propose a novel multi-user multi-IoT-device SR system to enable massive access in cellular IoT. In the considered system, the base station (BS) transmits information to multiple cellular users, and a number of IoT devices simultaneously backscatter their information to these users via the cellular signal. The cellular users jointly decode the information from the BS and IoT devices. Noting that the reflective links from the IoT devices can be regarded as the channel uncertainty of the direct links, we apply the robust design method to design the beamforming vectors at the BS. Specifically, the transmit power is minimized under the cellular transmission outage probability constraints and IoT transmission sum rate constraints. The algorithm based on semi-definite programming and difference-of-convex programming is proposed to solve the power minimization problem. Moreover, we consider a special case where each cellular user is associated with several adjacent IoT devices and propose a direction of arrival (DoA)-based transmit beamforming design approach. The DoA-based approach requires only the DoA and angular spread (AS) of the direct links instead of the instantaneous channel state information (CSI) of the reflective link channels, leading to a significant reduction in the channel feedback overhead. Simulation results have substantiated the multi-user multi-IoT-device SR system and the effectiveness of the proposed beamforming approaches. It is shown that the DoA-based beamforming approach achieves comparable performance as the CSI-based approach in the special case when the ASs are small.

cs.IT↗

arXiv2023

Assistance-Transmission Tradeoff for RIS-assisted Symbiotic Radios

This paper studies the reconfigurable intelligent surface (RIS)-assisted symbiotic radio (SR) system, where an RIS acts as a secondary transmitter to transmit its information by leveraging the primary signal as its RF carrier and simultaneously assists the primary transmission. Conventionally, all reflecting elements of the RIS are used to transmit the secondary signal, which, however, would limit its capability for assisting the primary transmission. To address this issue, we propose a novel RIS partitioning scheme, where the RIS is partitioned into two sub-surfaces, one to assist the primary transmission and the other to transmit the secondary signal. Naturally, there exists a fundamental tradeoff between the assistance and transmission capabilities of RIS regarding the surface partitioning strategy. Considering the coupling effect between the primary and secondary transmissions, we focus on the detection of the composite signal formed by the primary and secondary ones, based on which we propose a novel two-step detector. Then, we formulate the assistance-transmission tradeoff problem to minimize the bit error rate (BER) of the composite signal by jointly optimizing the surface partitioning strategy and the phase shifts of the two sub-surfaces, such that the overall BER of RIS-assisted SR is minimized. By solving this problem, we show that the optimized surface partitioning strategy depends on the channel strength ratio of the direct link to the reflected link. Finally, extensive simulations show that our proposed RIS partitioning scheme outperforms the conventional schemes which use all reflecting elements for either assistance or transmission.

cs.IT↗