arXiv subjects

Ying-Chang Liang

Publications and source records attributed to Ying-Chang Liang.

At least 73 records · Page 4Linked to original sources

arXiv2021

Symbiotic Communications: Where Marconi Meets Darwin

With the proliferation of wireless applications, the electromagnetic (EM) space is becoming more and more crowded and complex. This makes it a challenging task to accommodate the growing number of radio systems with limited radio resources. In this paper, by considering the EM space as a radio ecosystem, and leveraging the analogy to the natural ecosystem in biology, a novel symbiotic communication (SC) paradigm is proposed through which the relevant radio systems, called symbiotic radios (SRs), in a radio ecosystem form a symbiotic relationship (e.g., mutualistic symbiosis) through intelligent resource/service exchange. Radio resources include, e.g., spectrum, energy, and infrastructure, while typical radio services are communicating, relaying, and computing. The symbiotic relationship can be realized via either symbiotic coevolution or symbiotic synthesis. In symbiotic coevolution, each SR is empowered with an evolutionary cycle alongside the multi-agent learning, while in symbiotic synthesis, the SRs ingeniously optimize their operating parameters and transmission protocols by solving a multi-objective optimization problem. Promisingly, the proposed SC paradigm breaks the boundary of radio systems, thus providing us a fresh perspective on radio resource management and new guidelines to design future wireless communication systems.

cs.IT↗

arXiv2021

Active Reconfigurable Intelligent Surface Aided Wireless Communications

Reconfigurable Intelligent Surface (RIS) is a promising solution to reconfigure the wireless environment in a controllable way. To compensate for the double-fading attenuation in the RIS-aided link, a large number of passive reflecting elements (REs) are conventionally deployed at the RIS, resulting in large surface size and considerable circuit power consumption. In this paper, we propose a new type of RIS, called active RIS, where each RE is assisted by active loads (negative resistance), that reflect and amplify the incident signal instead of only reflecting it with the adjustable phase shift as in the case of a passive RIS. Therefore, for a given power budget at the RIS, a strengthened RIS-aided link can be achieved by increasing the number of active REs as well as amplifying the incident signal. We consider the use of an active RIS to a single input multiple output (SIMO) system. {However, it would unintentionally amplify the RIS-correlated noise, and thus the proposed system has to balance the conflict between the received signal power maximization and the RIS-correlated noise minimization at the receiver. To achieve this goal, it has to optimize the reflecting coefficient matrix at the RIS and the receive beamforming at the receiver.} An alternating optimization algorithm is proposed to solve the problem. Specifically, the receive beamforming is obtained with a closed-form solution based on linear minimum-mean-square-error (MMSE) criterion, while the reflecting coefficient matrix is obtained by solving a series of sequential convex approximation (SCA) problems. Simulation results show that the proposed active RIS-aided system could achieve better performance over the conventional passive RIS-aided system with the same power budget.

cs.IT↗

arXiv2021

Semi-Blind Cascaded Channel Estimation for Reconfigurable Intelligent Surface Aided Massive MIMO

Reconfigurable intelligent surface (RIS) is envisioned to be a promising green technology to reduce the energy consumption and improve the coverage and spectral efficiency of massive multiple-input multiple-output (MIMO) wireless networks. In a RIS-aided MIMO system, the acquisition of channel state information (CSI) is important for achieving passive beamforming gains of the RIS, but is also challenging due to the cascaded property of the transmitter-RIS-receiver channel and the lack of signal processing capability of the passive RIS elements. The state-of-the-art approach for CSI acquisition in such a system is a pure training-based strategy that depends on a long sequence of pilot symbols. In this paper, we investigate semi-blind cascaded channel estimation for RIS-aided massive MIMO systems, in which the receiver simultaneously estimates the channel coefficients and the partially unknown transmit signal with a small number of pilot sequences. Specifically, we formulate the semi-blind cascaded channel estimation as a trilinear matrix factorization task. Under the Bayesian inference framework, we develop a computationally efficient iterative algorithm using the approximate message passing principle to resolve the trilinear inference problem. Meanwhile, we present an analytical framework to characterize the theoretical performance bound of the proposed approach in the large-system limit via the replica method developed in statistical physics. Extensive simulation results demonstrate the effectiveness of the proposed semi-blind cascaded channel estimation algorithm.

cs.IT↗

arXiv2020

Reconfigurable Intelligent Surface Enhanced NOMA Assisted Backscatter Communication System

A reconfigurable intelligent surface (RIS) enhanced non-orthogonal multiple access assisted backscatter communication (RIS-NOMABC) system is considered. A joint optimization problem over power reflection coefficients and phase shifts is formulated. To solve this non-convex problem, a low complexity algorithm is proposed by invoking the alternative optimization, successive convex approximation and manifold optimization algorithms. Numerical results corroborate that the proposed RIS-NOMABC system outperforms the conventional non-orthogonal multiple access assisted backscatter communication (NOMABC) system without RIS, and demonstrate the feasibility and effectiveness of the proposed algorithm.

cs.IT↗

arXiv2020

Reconfigurable Intelligent Surface Aided Constant-Envelope Wireless Power Transfer

By reconfiguring the propagation environment of electromagnetic waves artificially, reconfigurable intelligent surfaces (RISs) have been regarded as a promising and revolutionary hardware technology to improve the energy and spectrum efficiency of wireless networks. In this paper, we study a RIS aided multiuser multiple-input multiple-output (MIMO) wireless power transfer (WPT) system, where the transmitter is equipped with a constant-envelope analog beamformer. First, we maximize the total received power of the users by jointly optimizing the beamformer at transmitter and the phase-shifts at the RIS, and propose two alternating optimization based suboptimal solutions by leveraging the semidefinite relaxation (SDR) and the successive convex approximation (SCA) techniques respectively. Then, considering the user fairness, we formulate another problem to maximize the total received power subject to the users' individual minimum received power constraints. A low complexity iterative algorithm based on both alternating direction method of multipliers (ADMM) and SCA techniques is proposed to solve this problem. In the case of multiple users, we further analyze the asymptotic performance as the number of RIS elements approaches infinity, and bound the performance loss caused by RIS phase quantization. Numerical results show the correctness of the analysis results and the effectiveness of the proposed algorithms.

eess.SP↗

arXiv2020

Deep Transfer Learning for Signal Detection in Ambient Backscatter Communications

Tag signal detection is one of the key tasks in ambient backscatter communication (AmBC) systems. However, obtaining perfect channel state information (CSI) is challenging and costly, which makes AmBC systems suffer from a high bit error rate (BER). To eliminate the requirement of channel estimation and to improve the system performance, in this paper, we adopt a deep transfer learning (DTL) approach to implicitly extract the features of channel and directly recover tag symbols. To this end, we develop a DTL detection framework which consists of offline learning, transfer learning, and online detection. Specifically, a DTL-based likelihood ratio test (DTL-LRT) is derived based on the minimum error probability (MEP) criterion. As a realization of the developed framework, we then apply convolutional neural networks (CNN) to intelligently explore the features of the sample covariance matrix, which facilitates the design of a CNN-based algorithm for tag signal detection. Exploiting the powerful capability of CNN in extracting features of data in the matrix formation, the proposed method is able to further improve the system performance. In addition, an asymptotic explicit expression is also derived to characterize the properties of the proposed CNN-based method when the number of samples is sufficiently large. Finally, extensive simulation results demonstrate that the BER performance of the proposed method is comparable to that of the optimal detection method with perfect CSI.

eess.SP↗

arXiv2020

Deep Transfer Learning-Assisted Signal Detection for Ambient Backscatter Communications

Existing tag signal detection algorithms inevitably suffer from a high bit error rate (BER) due to the difficulties in estimating the channel state information (CSI). To eliminate the requirement of channel estimation and to improve the system performance, in this paper, we adopt a deep transfer learning (DTL) approach to implicitly extract the features of communication channel and directly recover tag symbols. Inspired by the powerful capability of convolutional neural networks (CNN) in exploring the features of data in a matrix form, we design a novel covariance matrix aware neural network (CMNet)-based detection scheme to facilitate DTL for tag signal detection, which consists of offline learning, transfer learning, and online detection. Specifically, a CMNet-based likelihood ratio test (CMNet-LRT) is derived based on the minimum error probability (MEP) criterion. Taking advantage of the outstanding performance of DTL in transferring knowledge with only a few training data, the proposed scheme can adaptively fine-tune the detector for different channel environments to further improve the detection performance. Finally, extensive simulation results demonstrate that the BER performance of the proposed method is comparable to that of the optimal detection method with perfect CSI.

eess.SP↗

arXiv2020

Toward Smart Security Enhancement of Federated Learning Networks

As traditional centralized learning networks (CLNs) are facing increasing challenges in terms of privacy preservation, communication overheads, and scalability, federated learning networks (FLNs) have been proposed as a promising alternative paradigm to support the training of machine learning (ML) models. In contrast to the centralized data storage and processing in CLNs, FLNs exploit a number of edge devices (EDs) to store data and perform training distributively. In this way, the EDs in FLNs can keep training data locally, which preserves privacy and reduces communication overheads. However, since the model training within FLNs relies on the contribution of all EDs, the training process can be disrupted if some of the EDs upload incorrect or falsified training results, i.e., poisoning attacks. In this paper, we review the vulnerabilities of FLNs, and particularly give an overview of poisoning attacks and mainstream countermeasures. Nevertheless, the existing countermeasures can only provide passive protection and fail to consider the training fees paid for the contributions of the EDs, resulting in a unnecessarily high training cost. Hence, we present a smart security enhancement framework for FLNs. In particular, a verify-before-aggregate (VBA) procedure is developed to identify and remove the non-benign training results from the EDs. Afterward, deep reinforcement learning (DRL) is applied to learn the behaving patterns of the EDs and to actively select the EDs that can provide benign training results and charge low training fees. Simulation results reveal that the proposed framework can protect FLNs effectively and efficiently.

cs.CR↗

arXiv2020

Deep Reinforcement Learning for Multi-Agent Power Control in Heterogeneous Networks

We consider a typical heterogeneous network (HetNet), in which multiple access points (APs) are deployed to serve users by reusing the same spectrum band. Since different APs and users may cause severe interference to each other, advanced power control techniques are needed to manage the interference and enhance the sum-rate of the whole network. Conventional power control techniques first collect instantaneous global channel state information (CSI) and then calculate sub-optimal solutions. Nevertheless, it is challenging to collect instantaneous global CSI in the HetNet, in which global CSI typically changes fast. In this paper, we exploit deep reinforcement learning (DRL) to design a multi-agent power control algorithm in the HetNet. To be specific, by treating each AP as an agent with a local deep neural network (DNN), we propose a multiple-actor-shared-critic (MASC) method to train the local DNNs separately in an online trial-and-error manner. With the proposed algorithm, each AP can independently use the local DNN to control the transmit power with only local observations. Simulations results show that the proposed algorithm outperforms the conventional power control algorithms in terms of both the converged average sum-rate and the computational complexity.

cs.IT↗

arXiv2020

Joint Uplink-and-Downlink Optimization of 3D UAV Swarm Deployment for Wireless-Powered NB-IoT Networks

This paper investigates a full-duplex orthogonal-frequency-division multiple access (OFDMA) based multiple unmanned aerial vehicles (UAVs)-enabled wireless-powered Internet-of-Things (IoT) networks. In this paper, a swarm of UAVs is first deployed in three dimensions (3D) to simultaneously charge all devices, i.e., a downlink (DL) charging period, and then flies to new locations within this area to collect information from scheduled devices in several epochs via OFDMA due to potential limited number of channels available in Narrow Band IoT, i.e., an uplink (UL) communication period. To maximize the UL throughput of IoT devices, we jointly optimizes the UL-and-DL 3D deployment of the UAV swarm, including the device-UAV association, the scheduling order, and the UL-DL time allocation. In particular, the DL energy harvesting (EH) threshold of devices and the UL signal decoding threshold of UAVs are taken into consideration when studying the problem. Besides, both line-of-sight (LoS) and non-line-of-sight (NLoS) channel models are studied depending on the position of sensors and UAVs. The influence of the potential limited channels issue in NB-IoT is also considered by studying the IoT scheduling policy. Two scheduling policies, a near-first (NF) policy and a far-first (FF) policy, are studied. It is shown that the NF scheme outperforms FF scheme in terms of sum throughput maximization; whereas FF scheme outperforms NF scheme in terms of system fairness.

cs.IT↗

arXiv2020

Reconfigurable Intelligent Surface Empowered Device-to-Device Communication Underlaying Cellular Networks

Reconfigurable intelligent surface (RIS) is a new and revolutionary technology to achieve spectrum-, energy- and cost-efficient wireless networks. This paper studies the resource allocation for RIS-empowered device-to-device (D2D) communication underlaying a cellular network, in which an RIS is employed to enhance desired signals and suppress interference between paired D2D and cellular links. We maximize the overall network's spectrum efficiency (SE) (i.e., sum rate of D2D users and cellular users) and energy efficiency (EE), respectively, by jointly optimizing the resource reuse indicators, the transmit power and the RIS's passive beamforming, under the signal-to-interference-plus-noise ratio constraints and other practical constraints. To solve the non-convex problems, we first propose an efficient user-pairing scheme based on relative channel strength to determine the resource reuse indicators. Then, the transmit power and the RIS's passive beamforming are jointly optimized to maximize the SE by a proposed iterative algorithm, based on the techniques of alternating optimization, successive convex approximation, Lagrangian dual transform and quadratic transform. Moreover, the EE-maximization problem is solved by an alternating algorithm integrated with Dinkelbach's method. Also, the convergence and complexity of both algorithms are analyzed. Numerical results show that the proposed design achieves significant SE and EE enhancements compared to traditional underlaying D2D network without RIS and other benchmarks.

cs.IT↗

arXiv2020

Symbiotic Radio: Cognitive Backscattering Communications for Future Wireless Networks

The heterogenous wireless services and exponentially growing traffic call for novel spectrum- and energy-efficient wireless communication technologies. In this paper, a new technique, called symbiotic radio (SR), is proposed to exploit the benefits and address the drawbacks of cognitive radio (CR) and ambient backscattering communications(AmBC), leading to mutualism spectrum sharing and highly reliable backscattering communications. In particular, the secondary transmitter (STx) in SR transmits messages to the secondary receiver (SRx) over the RF signals originating from the primary transmitter (PTx) based on cognitive backscattering communications, thus the secondary system shares not only the radio spectrum, but also the power, and infrastructure with the primary system. In return, the secondary transmission provides beneficial multipath diversity to the primary system, therefore the two systems form mutualism spectrum sharing. More importantly, joint decoding is exploited at SRx to achieve highly reliable backscattering communications. To exploit the full potential of SR, in this paper, we address three fundamental tasks in SR: (1) enhancing the backscattering link via active load; (2) achieving highly reliable communications through joint decoding; and (3) capturing PTx's RF signals using reconfigurable intelligent surfaces. Emerging applications, design challenges and open research problems will also be discussed.

eess.SP↗

arXiv2020

Reconfigurable Intelligent Surfaces for Energy Efficiency in D2D Communication Network

In this letter, the joint power control of D2D users and the passive beamforming of reconfigurable intelligent surfaces (RIS) for a RIS-aided device-to-device (D2D) communication network is investigated to maximize energy efficiency. This non-convex optimization problem is divided into two subproblems, which are passive beamforming and power control. The two subproblems are optimized alternately. We first decouple the passive beamforming at RIS based on the Lagrangian dual transform. This problem is solved by using fractional programming. Then we optimize the power control by using the Dinkelbach method. By iteratively solving the two subproblems, we obtain a suboptimal solution for the joint optimization problem. Numerical results have verified the effectiveness of the proposed algorithm, which can significantly improve the energy efficiency of the D2D network.

cs.IT↗

arXiv2020

Two-Timescale Optimization for Intelligent Reflecting Surface Aided D2D Underlay Communication

The performance of a device-to-device (D2D) underlay communication system is limited by the co-channel interference between cellular users (CUs) and D2D devices. To address this challenge, an intelligent reflecting surface (IRS) aided D2D underlay system is studied in this paper. A two-timescale optimization scheme is proposed to reduce the required channel training and feedback overhead, where transmit beamforming at the base station (BS) and power control at the D2D transmitter are adapted to instantaneous effective channel state information (CSI); and the IRS phase shifts are adapted to slow-varying channel mean. Based on the two-timescale optimization scheme, we aim to maximize the D2D ergodic rate subject to a given outage probability constrained signal-to-interference-plus-noise ratio (SINR) target for the CU. The two-timescale problem is decoupled into two sub-problems, and the two sub-problems are solved iteratively with closed-form expressions. Numerical results verify that the two-timescale based optimization performs better than several baselines, and also demonstrate a favorable trade-off between system performance and CSI overhead.

cs.IT↗

arXiv2020

Reconfigurable Intelligent Surface Aided Constant-Envelope Wireless Power Transfer

eess.SP↗

arXiv2020

Towards Smart Wireless Communications via Intelligent Reflecting Surfaces: A Contemporary Survey

This paper presents a literature review on recent applications and design aspects of the intelligent reflecting surface (IRS) in the future wireless networks. Conventionally, the network optimization has been limited to transmission control at two endpoints, i.e., end users and network controller. The fading wireless channel is uncontrollable and becomes one of the main limiting factors for performance improvement. The IRS is composed of a large array of scattering elements, which can be individually configured to generate additional phase shifts to the signal reflections. Hence, it can actively control the signal propagation properties in favor of signal reception, and thus realize the notion of a smart radio environment. As such, the IRS's phase control, combined with the conventional transmission control, can potentially bring performance gain compared to wireless networks without IRS. In this survey, we first introduce basic concepts of the IRS and the realizations of its reconfigurability. Then, we focus on applications of the IRS in wireless communications. We overview different performance metrics and analytical approaches to characterize the performance improvement of IRS-assisted wireless networks. To exploit the performance gain, we discuss the joint optimization of the IRS's phase control and the transceivers' transmission control in different network design problems, e.g.,~rate maximization and power minimization problems. Furthermore, we extend the discussion of IRS-assisted wireless networks to some emerging use cases. Finally, we highlight important practical challenges and future research directions for realizing IRS-assisted wireless networks in beyond 5G communications.

cs.IT↗

arXiv2020

Federated Learning in Mobile Edge Networks: A Comprehensive Survey

In recent years, mobile devices are equipped with increasingly advanced sensing and computing capabilities. Coupled with advancements in Deep Learning (DL), this opens up countless possibilities for meaningful applications. Traditional cloudbased Machine Learning (ML) approaches require the data to be centralized in a cloud server or data center. However, this results in critical issues related to unacceptable latency and communication inefficiency. To this end, Mobile Edge Computing (MEC) has been proposed to bring intelligence closer to the edge, where data is produced. However, conventional enabling technologies for ML at mobile edge networks still require personal data to be shared with external parties, e.g., edge servers. Recently, in light of increasingly stringent data privacy legislations and growing privacy concerns, the concept of Federated Learning (FL) has been introduced. In FL, end devices use their local data to train an ML model required by the server. The end devices then send the model updates rather than raw data to the server for aggregation. FL can serve as an enabling technology in mobile edge networks since it enables the collaborative training of an ML model and also enables DL for mobile edge network optimization. However, in a large-scale and complex mobile edge network, heterogeneous devices with varying constraints are involved. This raises challenges of communication costs, resource allocation, and privacy and security in the implementation of FL at scale. In this survey, we begin with an introduction to the background and fundamentals of FL. Then, we highlight the aforementioned challenges of FL implementation and review existing solutions. Furthermore, we present the applications of FL for mobile edge network optimization. Finally, we discuss the important challenges and future research directions in FL

cs.NI↗

arXiv2020

Vision, Requirements, and Technology Trend of 6G: How to Tackle the Challenges of System Coverage, Capacity,User Data-Rate and Movement Speed

Since 5G new radio comes with non-standalone (NSA) and standalone (SA) versions in 3GPP, research on 6G has been on schedule by academics and industries. Though 6G is supposed to have much higher capabilities than 5G, yet there is no clear description about what 6G is. In this article, a comprehensive discussion of 6G is given based on the review of 5G developments, covering visions and requirements, technology trends and challenges, aiming at tackling the challenge of coverage, capacity, the user data rate and movement speed of mobile communication system. The vision of 6G is to fully support the development of a Ubiquitous Intelligent Mobile Society with intelligent life and industries. Finally, the roadmap of the 6G standard is suggested for the future.

cs.IT↗