arXiv subjects

Ying-Xun Zhang

Publications and source records attributed to Ying-Xun Zhang.

17 recordsLinked to original sources

arXiv2025

Effects of inner crusts on $g$-mode oscillations in neutron stars

In this work we investigate the influence of neutron stars' crusts on the non-radial $g$-mode oscillations and examine their correlations with nuclear matter properties fixed by adopting 10 different relativistic density functionals. At subsaturation densities, neutron star matter takes non-uniform structures and form the crusts. We find that the Brunt-Väisälä (BV) frequency increases significantly at densities slightly above the neutron drip density (i.e., neutron stars' inner crusts), which leads to crust $g$-mode oscillations with their frequencies insensitive to the adopted density functional. At larger densities, BV frequency increases as well due to the core-crust transitions and emergence of muons, which lead to core $g$-mode oscillations. It is found that the obtained core $g$-mode frequencies generally increase with the slope of nuclear symmetry energy $L$, which eventually intersect with that of the crust $g$ modes adopting large enough $L$. This leads to the avoid-crossing phenomenon for the global $g$ modes that encompass contributions from both the crust and core. The correlation between the global $g_1$ mode and $L$ is identified for neutron stars with masses $M\gtrsim 1.4\ M_{\odot}$, which enables the measurements of $L$ based on gravitational wave observations. In our future study, the effects of the discontinuities in density or shear modulus should be considered, while the temperature, rotation, magnetic field, and superfluid neutron gas in neutron stars could also play important roles.

astro-ph.HE↗

arXiv2024

Elastic properties of nuclear pasta in neutron-star crusts

Based on the relativistic mean field (RMF) model with Thomas-Fermi approximation, we investigate the elastic properties of neutron star matter. The elastic constants are estimated by introducing deformations on the nuclear pasta structures in $β$-equilibrium, where various crystalline configurations are considered in a fully three-dimensional geometry without the Wigner-Seitz approximation. Two scenarios with different symmetry energy slope ($L = 41.34$ and 89.39 MeV) are examined, where the the elastic constants can vary by ten times. By fitting to the numerical results, we improve the analytic formulae for the elastic properties of nuclear pasta by introducing damping factors.

nucl-th↗

arXiv2024

Comparing pion production in transport simulations of heavy-ion collisions at $270A$ MeV under controlled conditions

Within the TMEP, we present a detailed study of the performance of different transport models in Sn+Sn collisions at $270A$ MeV, and put particular emphasis on the production of pions and $Δ$ resonances, which have been used as probes of the nuclear symmetry energy. We prescribe a common and rather simple physics model, and follow in detail the results of 4 BUU models and 6 QMD models. The nucleonic evolution of the collision and the nucleonic observables in these codes do not completely converge, but the differences among the codes can be understood as being due to several reasons: the basic differences between BUU and QMD models in the representation of the phase-space distributions, computational differences in the mean-field evaluation, and differences in the adopted strategies for the Pauli blocking in the collision integrals. For pionic observables, we find that a higher maximum density leads to an enhanced pion yield and a reduced $π^-/π^+$ yield ratio, while a more effective Pauli blocking generally leads to a slightly suppressed pion yield and an enhanced $π^-/π^+$ yield ratio. We specifically investigate the effect of the Coulomb force, and find that it increases the total $π^-/π^+$ yield ratio but reduces the ratio at high pion energies, although differences in its implementations do not have a dominating role in the differences among the codes. Taking into account only the results of codes that strictly follow the homework specifications, we find a convergence of the codes in the final charged pion yield ratio to a $1σ$ deviation of about $5\%$. However, the uncertainty is expected to be reduced to about $1.6\%$ if the same or similar strategies and ingredients, i.e., an improved Pauli blocking and calculation of the non-linear term in the mean-field potential, are similarly used in all codes.

nucl-th↗

arXiv2023

Probing the nucleon effective mass splitting with the light particle emission

In this work, we first analyze the correlations among different nuclear matter parameters which are obtained by the 119 effective Skyrme interaction sets. The values of the correlation coefficients illustrate that the magnitude of the effective mass splitting is crucial for the tight constraints of the symmetry energy via HICs. Thus, the main object of this work is to investigate the impacts of the effective mass splitting on the heavy ion collisions observables. The $^{86}$Kr+$^{208}$Pb system at the beam energy ranging from 25A MeV to 200A MeV are simulated within the framework of the improved quantum molecular dynamics model (ImQMD-Sky) for this goal. Our calculations show that the slopes of the spectra of $\ln$[Y(n)/Y(p)] and $\ln$[Y(t)/Y($^3$He)], which are the logarithms of the neutron to proton yield ratios and triton to Helium-3 yield ratios, are directly related to the effective mass splitting and can be used to probe the effective mass splitting.

nucl-th↗

arXiv2023

Elastic properties of nuclear pasta in a fully three-dimensional geometry

Realistic estimations on the elastic properties of neutron star matter are carried out with a large strain ($\varepsilon \lesssim 0.5$) in the framework of relativistic-mean-field model with Thomas-Fermi approximation, where various crystalline configurations are considered in a fully three-dimensional geometry with reflection symmetry. Our calculation confirms the validity of assuming Coulomb crystals for the droplet phase above neutron drip density, which nonetheless does not work at large densities since the elastic constants are found to be decreasing after reaching their peaks. Similarly, the analytic formulae derived in the incompressible liquid-drop model give excellent description for the rod phase at small densities, which overestimates the elastic constants at larger densities. For slabs, due to the negligence on the variations of their thicknesses, the analytic formulae from liquid-drop model agree qualitatively but not quantitatively with our numerical estimations. By fitting to the numerical results, these analytic formulae are improved by introducing dampening factors. The impacts of nuclear symmetry energy are examined adopting two parameter sets, corresponding to the slope of symmetry energy $L = 41.34$ and 89.39 MeV. Even with the uncertainties caused by the anisotropy in polycrystallines, the elastic properties of neutron star matter obtained with $L = 41.34$ and 89.39 MeV are distinctively different, results in detectable differences in various neutron star activities.

nucl-th↗

arXiv2023

Testing the phase transition parameters inside neutron stars with the production of protons and lambdas in relativistic heavy-ion collisions

We demonstrate the consistency of the quark deconfinement phase transition parameters in the beta-stable neutron star matter and in the nearly symmetric nuclear matter formed in heavy-ion collisions (HICs). We investigate the proton and $Λ$ flow in Au+Au collisions at 3 and 4.5 GeV/nucleon incident beam energies with the pure hadron cascade version of a multi-phase transport model. The phase transition in HICs and neutron stars is described based on a class of hybrid equations of state from the quark mean-field model for the hadronic phase and a constant-speed-of-sound parametrization for the high-density quark phase. The measurements of the anisotropic proton flow at 3 GeV/nucleon by the STAR collaboration favor a relatively low phase transition density lower than $\sim 2.5$ times saturation density indicated by the gravitational wave and electromagnetic observations of neutron stars. And the proton flow data at the higher energy of 4.5 GeV/nucleon can be used to effectively constrain the softness of high-density quark matter equations of state. Finally, compared to the proton flow, the $Λ$ flow is found to be less sensitive and not constraining to the equations of state.

nucl-th↗

arXiv2022

Unified neutron star EOSs and neutron star structures in RMF models

In the framework of Thomas-Fermi approximation, we study systematically the EOSs and microscopic structures of neutron star matter in a vast density range with $n_\mathrm{b}\approx 10^{-10}$-2 $\mathrm{fm}^{-3}$, where various covariant density functionals are adopted, i.e., those with nonlinear self couplings (NL3, PK1, TM1, GM1, MTVTC) and density-dependent couplings (DD-LZ1, DDME-X, PKDD, DD-ME2, DD2, TW99). It is found that the EOSs generally coincide with each other at $n_\mathrm{b}\lesssim 10^{-4}$ fm${}^{-3}$ and 0.1 fm${}^{-3}\lesssim n_\mathrm{b} \lesssim 0.3$ fm${}^{-3}$, while in other density regions they are sensitive to the effective interactions between nucleons. By adopting functionals with larger slope of symmetry energy $L$, the curvature parameter $K_\mathrm{sym}$ and neutron drip density generally increase, while the droplet size, proton number of nucleus, core-crust transition density, and onset density of non-spherical nuclei decrease. All functionals predict neutron stars with maximum masses exceeding the two-solar-mass limit, while those of DD2, DD-LZ1, DD-ME2, and DDME-X predict optimum neutron star radii according to the observational constraints. Nevertheless, the corresponding skewness coefficients $J$ are much lager than expected, while only the functionals MTVTC and TW99 meet the start-of-art constraints on $J$. More accurate measurements on the radius of PSR J0740+6620 and the maximum mass of neutron stars are thus essential to identify the functional that satisfies all constraints from nuclear physics and astrophysical observations. Approximate linear correlations between neutron stars' radii at $M=1.4 M_{\odot}$ and $2 M_{\odot}$, the slope $L$ and curvature parameter $K_\mathrm{sym}$ of symmetry energy are observed as well, which is mainly attributed to the curvature-slope correlations in the functionals adopted here.

nucl-th↗

arXiv2022

Transport Model Comparison Studies of Intermediate-Energy Heavy-Ion Collisions

Transport models are the main method to obtain physics information from low to relativistic-energy heavy-ion collisions. The Transport Model Evaluation Project (TMEP) has been pursued to test the robustness of transport model predictions in reaching consistent conclusions from the same type of physical model. Calculations under controlled conditions of physical input and set-up were performed with various participating codes. These included both calculations of nuclear matter in a box with periodic boundary conditions, and more realistic calculations of heavy-ion collisions. In this intermediate review, we summarize and discuss the present status of the project. We also provide condensed descriptions of the 26 participating codes, which contributed to some part of the project. These include the major codes in use today. We review the main results of the studies completed so far. They show, that in box calculations the differences between the codes can be well understood and a convergence of the results can be reached. These studies also highlight the systematic differences between the two families of transport codes, known as BUU and QMD type codes. However, when the codes were compared in full heavy-ion collisions using different physical models, as recently for pion production, they still yielded substantially different results. This calls for further comparisons of heavy-ion collisions with controlled models and of box comparisons of important ingredients, like momentum-dependent fields, which are currently underway. We often indicate improved strategies in performing transport simulations and thus provide guidance to code developers. Results of transport simulations of heavy-ion collisions from a given code will have more significance if the code can be validated against benchmark calculations such as the ones summarized in this review.

nucl-th↗

arXiv2021

Applying machine learning to determine impact parameter in nuclear physics experiments

Machine Learning (ML) algorithms have been demonstrated to be capable of predicting impact parameter in heavy-ion collisions from transport model simulation events with perfect detector response. We extend the scope of ML application to experimental data by incorporating realistic detector response of the S$π$RIT Time Projection Chamber into the heavy-ion simulation events generated from the UrQMD model to resemble experimental data. At 3 fm, the predicted impact parameter is 2.8 fm if simulation events with perfect detector is used for training and testing; 2.4 fm if detector response is included in the training and testing, and 5.8 fm if ML algorithms trained with perfect detector is applied to testing data that has included detector response. The last result is not acceptable illustrating the importance of including the detector response in developing the ML training algorithm. We also test the model dependence by applying the algorithms trained on UrQMD model to simulated events from four different transport models as well as using different input parameters on UrQMD model. Using data from Sn+Sn collisions at E/A=270 MeV, the ML determined impact parameters agree well with the experimentally determined impact parameter using multiplicities, except in the very central and very peripheral regions. ML selects central collision events better and allows impact parameters determination beyond the sharp cutoff limit imposed by experimental methods.

physics.ins-det↗

arXiv2021

Comparison of Heavy-Ion Transport Simulations: Mean-field Dynamics in a Box

Within the transport model evaluation project (TMEP) of simulations for heavy-ion collisions, the mean-field response is examined here. Specifically, zero-sound propagation is considered for neutron-proton symmetric matter enclosed in a periodic box, at zero temperature and around normal density. The results of several transport codes belonging to two families (BUU-like and QMD-like) are compared among each other and to exact calculations. For BUU-like codes, employing the test particle method, the results depend on the combination of the number of test particles and the spread of the profile functions that weight integration over space. These parameters can be properly adapted to give a good reproduction of the analytical zero-sound features. QMD-like codes, using molecular dynamics methods, are characterized by large damping effects, attributable to the fluctuations inherent in their phase-space representation. Moreover, for a given nuclear effective interaction, they generally lead to slower density oscillations, as compared to BUU-like codes. The latter problem is mitigated in the more recent lattice formulation of some of the QMD codes. The significance of these results for the description of real heavy-ion collisions is discussed.

nucl-th↗

arXiv2021

Nuclear pasta structures and symmetry energy

In the framework of the relativistic mean field model with Thomas-Fermi approximation, we study the structures of low density nuclear matter in a three-dimensional geometry with reflection symmetry. The numerical accuracy and efficiency are improved by expanding the mean fields according to fast cosine transformation and considering only one octant of the unit cell. The effect of finite cell size is treated carefully by searching for the optimum cell size. Typical pasta structures (droplet, rod, slab, tube, and bubble) arranged in various crystalline configurations are obtained for both fixed proton fractions and $β$-equilibration. It is found that the properties of droplets/bubbles are similar in body-centered cubic (BCC) and face-centered cubic (FCC) lattices, where the FCC lattice generally becomes more stable than BCC lattice as density increases. For the rod/tube phases, the honeycomb lattice is always more stable than the simple one. By introducing an $ω$-$ρ$ cross coupling term, we further examine the pasta structures with a smaller slope of symmetry energy $L = 41.34$ MeV, which predicts larger onset densities for core-crust transition and non-spherical nuclei. Such a variation due to the reduction of $L$ is expected to have impacts on various properties in neutron stars, supernova dynamics, and binary neutron star mergers.

nucl-th↗

arXiv2020

Symmetry energy investigation with pion production from Sn+Sn systems

In the past two decades, pions created in the high density regions of heavy ion collisions have been predicted to be sensitive at high densities to the symmetry energy term in the nuclear equation of state, a property that is key to our understanding of neutron stars. In a new experiment designed to study the symmetry energy, the multiplicities of negatively and positively charged pions have been measured with high accuracy for central $^{132}$Sn+$^{124}$Sn, $^{112}$Sn+$^{124}$Sn, and $^{108}$Sn+$^{112}$Sn collisions at $E/A=270~\mathrm{MeV}$ with the S$π$RIT Time Projection Chamber. While the uncertainties of individual pion multiplicities are measured to 4\%, those of the charged pion multiplicity ratios are measured to 2\%. We compare these data to predictions from seven major transport models. The calculations reproduce qualitatively the dependence of the multiplicities and their ratios on the total neutron to proton number in the colliding systems. However, the predictions of the transport models from different codes differ too much to allow extraction of reliable constraints on the symmetry energy from the data. This finding may explain previous contradictory conclusions on symmetry energy constraints obtained from pion data in Au+Au system. These new results call for better understanding of the differences among transport codes, and new observables that are more sensitive to the density dependence of the symmetry energy.

nucl-ex↗

arXiv2019

Comparison of heavy-ion transport simulations: Collision integral with pions and $Δ$ resonances in a box

We compare ten transport codes for a system confined in a box, aiming at improved handling of the production of $Δ$ resonances and pions, which is indispensable for constraining high-density symmetry energy from observables such as the $π^-/π^+$ yield ratio in heavy-ion collisions. The system in a box is initialized with nucleons at saturation density and at 60 MeV temperature. The reactions $NN\leftrightarrow NΔ$ and $Δ\leftrightarrow Nπ$ are implemented, but the Pauli blocking and the mean-field potential are deactivated in the present comparison. Results are compared to those from the two reference cases of a chemically equilibrated ideal gas mixture and of the rate equation. In the results of the numbers of $Δ$ and $π$, deviations from the reference values are observed in many codes, and they depend significantly on the size of the time step. These deviations are tied to different ways in ordering the sequence of collisions and decays, that take place in the same time step. Better agreements are seen in the reaction rates and the number ratios among the isospin species of $Δ$ and $π$. These are, however, affected by the correlations, which are absent in the Boltzmann equation, but are induced by the way particle scatterings are treated in transport calculations. The uncertainty in the transport-code predictions of the $π^-/π^+$ ratio for the system initialized at n/p = 1.5, after letting the existing $Δ$ resonances decay, is found to be within a few percent, which is sufficiently small so that it does not strongly impact constraining the high-density symmetry energy from heavy-ion collisions. Most of the sources of uncertainties have been understood, and individual codes may be further improved. This investigation will be extended in the future to heavy-ion collisions to ensure the problems identified here remain under control.

nucl-th↗

arXiv2018

Comparison of heavy-ion transport simulations: Collision integral in a box

Simulations by transport codes are indispensable to extract valuable physics information from heavy ion collisions. In order to understand the origins of discrepancies between different widely used transport codes, we compare 15 such codes under controlled conditions of a system confined to a box with periodic boundary, initialized with Fermi-Dirac distributions at saturation density and temperatures of either 0 or 5 MeV. In such calculations, one is able to check separately the different ingredients of a transport code. In this second publication of the code evaluation project, we only consider the two-body collision term, i.e. we perform cascade calculations. When the Pauli blocking is artificially suppressed, the collision rates are found to be consistent for most codes (to within $1\%$ or better) with analytical results, or completely controlled results of a basic cascade code after eliminating the correlations within the same pair of colliding particles. In calculations with active Pauli blocking, the blocking probability was found to deviate from the expected reference values. The reason is found in substantial phase-space fluctuations and smearing tied to numerical algorithms and model assumptions in the representation of phase space. This results in the reduction of the blocking probability in most transport codes, so that the simulated system gradually evolves away from the Fermi-Dirac towards a Boltzmann distribution. As a result of this investigation, we are able to make judgements about the most effective strategies in transport simulations for determining the collision probabilities and the Pauli blocking. Investigation in a similar vein of other ingredients in transport calculations, like the mean field propagation or the production of nucleon resonances and mesons, will be discussed in the future publications.

nucl-th↗

arXiv2016

Understanding transport simulations of heavy-ion collisions at 100 and 400 AMeV: Comparison of heavy ion transport codes under controlled conditions

Transport simulations are very valuable for extracting physics information from heavy-ion collision experiments. With the emergence of many different transport codes in recent years, it becomes important to estimate their robustness in extracting physics information from experiments. We report on the results of a transport code comparison project. 18 commonly used transport codes were included in this comparison: 9 Boltzmann-Uehling-Uhlenbeck-type codes and 9 Quantum-Molecular-Dynamics-type codes. These codes have been required to simulate Au+Au collisions using the same physics input for mean fields and for in-medium nucleon-nucleon cross sections, as well as the same initialization set-up, the impact parameter, and other calculational parameters at 100 and 400 AMeV incident energy. Among the codes we compare one-body observables such as rapidity and transverse flow distributions. We also monitor non-observables such as the initialization of the internal states of colliding nuclei and their stability, the collision rates and the Pauli blocking. We find that not completely identical initializations constitute partly for different evolutions. Different strategies to determine the collision probabilities, and to enforce the Pauli blocking, also produce considerably different results. There is a substantial spread in the predictions for the observables, which is much smaller at the higher incident energy. We quantify the uncertainties in the collective flow resulting from the simulation alone as about $30\%$ at 100 AMeV and $13\%$ at 400 AMeV, respectively. We propose further steps within the code comparison project to test the different aspects of transport simulations in a box calculation of infinite nuclear matter. This should, in particular, improve the robustness of transport model predictions at lower incident energies where abundant amounts of data are available.

nucl-th↗

arXiv2014

Energy-Dependence of Nucleus-Nucleus Potential and Friction Parameter in Fusion Reactions

Applying a macroscopic reduction procedure on the improved quantum molecular dynamics (ImQMD) model, the energy dependences of the nucleus-nucleus potential, the friction parameter, and the random force characterizing a one-dimensional Langevin-type description of the heavy-ion fusion process are investigated. Systematic calculations with the ImQMD model show that the fluctuation-dissipation relation found in the symmetric head-on fusion reactions at energies just above the Coulomb barrier fades out when the incident energy increases. It turns out that this dynamical change with increasing incident energy is caused by a specific behavior of the friction parameter which directly depends on the microscopic dynamical process, i.e., on how the collective energy of the relative motion is transferred into the intrinsic excitation energy. It is shown microscopically that the energy dissipation in the fusion process is governed by two mechanisms: One is caused by the nucleon exchanges between two fusing nuclei, and the other is due to a rearrangement of nucleons in the intrinsic system. The former mechanism monotonically increases the dissipative energy and shows a weak dependence on the incident energy, while the latter depends on both the relative distance between two fusing nuclei and the incident energy. It is shown that the latter mechanism is responsible for the energy dependence of the fusion potential and explains the fading out of the fluctuation-dissipation relation.

nucl-th↗

arXiv2013

Non-Gaussian Fluctuation and Non-Markovian Effect in the Nuclear Fusion Process: Langevin Dynamics Emerging from Quantum Molecular Dynamics Simulations

Macroscopic parameters as well as precise information on the random force characterizing the Langevin type description of the nuclear fusion process around the Coulomb barrier are extracted from the microscopic dynamics of individual nucleons by exploiting the numerical simulation of the improved quantum molecular dynamics. It turns out that the dissipation dynamics of the relative motion between two fusing nuclei is caused by a non-Gaussian distribution of the random force. We find that the friction coefficient as well as the time correlation function of the random force takes particularly large values in a region a little bit inside of the Coulomb barrier. A clear non-Markovian effect is observed in the time correlation function of the random force. It is further shown that an emergent dynamics of the fusion process can be described by the generalized Langevin equation with memory effects by appropriately incorporating the microscopic information of individual nucleons through the random force and its time correlation function.

nucl-th↗