arXiv subjects

Yinghua Qiu

Publications and source records attributed to Yinghua Qiu.

30 records · Page 2Linked to original sources

arXiv2023

Theoretical prediction of diffusive ionic current through nanopores under salt gradients

In charged nanopores, ionic diffusion current reflects the ionic selectivity and ionic permeability of nanopores which determines the performance of osmotic energy conversion, i.e. the output power and efficiency. Here, theoretical predictions of the diffusive currents through cation-selective nanopores have been developed based on the investigation of diffusive ionic transport under salt gradients with simulations. The ionic diffusion current I satisfies a reciprocal relationship with the pore length I correlates with a/L (a is a constant) in long nanopores. a is determined by the cross-sectional areas of diffusion paths for anions and cations inside nanopores which can be described with a quadratic power of the diameter, and the superposition of a quadratic power and a first power of the diameter, respectively. By using effective concentration gradients instead of nominal ones, the deviation caused by the concentration polarization can be effectively avoided in the prediction of ionic diffusion current. With developed equations of effective concentration difference and ionic diffusion current, the diffusion current across nanopores can be well predicted in cases of nanopores longer than 100 nm and without overlapping of electric double layers. Our results can provide a convenient way for the quantitative prediction of ionic diffusion currents under salt gradients.

physics.chem-ph↗

arXiv2022

Effective Charged Exterior Surfaces for Enhanced Ionic Diffusion through Nanopores under Salt Gradients

High-performance osmotic energy conversion requires both large ionic throughput and high ionic selectivity, which can be significantly promoted by exterior surface charges simultaneously, especially for short nanopores. Here, we investigate the enhancement of ionic diffusion by charged exterior surfaces under various conditions and explore corresponding effective charged areas. From simulations, ionic diffusion is promoted more significantly by exterior surface charges through nanopores with a shorter length, wider diameter, and larger surface charge density, or under higher salt gradients. Effective widths of the charged ring regions near nanopores are reversely proportional to the pore length and linearly dependent on the pore diameter, salt gradient, and surface charge density. Due to the important role of effective charged areas in the propagation of ionic diffusion through single nanopores to cases with porous membranes, our results may provide useful guidance to the design and fabrication of porous membranes for practical high-performance osmotic energy harvesting.

physics.chem-ph↗

arXiv2021

Significantly Enhanced Performance of Nanofluidic Osmotic Power Generation by Slipping Surfaces of Nanopores

High-performance osmotic energy conversion (OEC) with perm-selective porous membrane requires both high ionic selectivity and permeability simultaneously. Here, hydrodynamic slip is considered on surfaces of nanopores to break the tradeoff between ionic selectivity and permeability, because it decreases the viscous friction at solid-liquid interfaces which can promote ionic diffusion during OEC. Taking advantage of simulations, influences from individual slipping surfaces on the OEC performance have been investigated, i.e. the slipping inner surface (surfaceinner) and exterior surfaces on the low- and high-concentration sides (surfaceL and surfaceH). Results show that the slipping surfaceL is crucial for high-performance OEC. For nanopores with various lengths, the slipping surfaceL simultaneously increases both ionic permeability and selectivity of nanopores, which results in both significantly enhanced electric power and energy conversion efficiency. While for nanopores longer than 30 nm, the slipping surfaceinner plays a dominant role in the increase of electric power, which induces a considerable decrease in energy conversion efficiency due to enhanced transport of both cations and anions. Considering the difficulty in hydrodynamic slip modification to the surfaceinner of nanopores, the surface modification to the surfaceL may be a better choice to achieve high-performance OEC. Our results provide feasible guidance to the design of porous membranes for high-performance osmotic energy harvesting.

physics.chem-ph↗

arXiv2021

High-Performance Nanofluidic Osmotic Power Generation Enabled by Exterior Surface Charges under the Natural Salt Gradient

High-performance osmotic energy conversion (OEC) requires both high ionic selectivity and permeability in nanopores. Here, through systematical explorations of influences from individual charged nanopore surfaces on the performance of OEC, we find that the charged exterior surface on the low-concentration side (surfaceL) is essential to achieve high-performance osmotic power generation, which can significantly improve the ionic selectivity and permeability simultaneously. Detailed investigation of ionic transport indicates that electric double layers near charged surfaces provide high-speed passages for counterions. The charged surfaceL enhances cation diffusion through enlarging the effective diffusive area, and inhibits anion transport by electrostatic repulsion. Different areas of charged exterior surfaces have been considered to mimic membranes with different porosities in practical applications. Through adjusting the width of the charged ring region on the surfaceL, electric power in single nanopores increases from 0.3 to 3.4 pW with a plateau at the width of ~200 nm. The power density increases from 4200 to 4900 W/m2 and then decreases monotonously that reaches the commercial benchmark at the charged width of ~480 nm. While, energy conversion efficiency can be promoted from 4% to 26%. Our results provide useful guide in the design of nanoporous membranes for high-performance osmotic energy harvesting.

physics.chem-ph↗

arXiv2020

Modulation of Ionic Current Rectification in Ultra-Short Conical Nanopores

Nanopores that exhibit ionic current rectification (ICR) behave like diodes, such that they transport ions more efficiently in one direction than the other. Conical nanopores have been shown to rectify ionic current, but only those with at least 500 nm in length exhibit significant ICR. Here, through the finite element method, we show how ICR of conical nanopores with length below 200 nm can be tuned by controlling individual charged surfaces i.e. inner pore surface (surface_inner), and exterior pore surfaces on the tip and base side (surface_tip and surface_base). The charged surface_inner and surface_tip can induce obvious ICR individually, while the effects of the charged surface_base on ICR can be ignored. The fully charged surface_inner alone could render the nanopore counterion-selective and induces significant ion concentration polarization in the tip region, which causes reverse ICR compared to nanopores with all surface charged. In addition, the direction and degree of rectification can be further tuned by the depth of the charged surface_inner. When considering the exterior membrane surface only, the charged surface_tip causes intra-pore ionic enrichment and depletion under opposite biases which results in significant ICR. Its effective region is within ~40 nm beyond the tip orifice. We also found that individual charged parts of the pore system contributed to ICR in an additive way due to the additive effect on the ion concentration regulation along the pore axis. With various combinations of fully/partially charged surface_inner and surface_tip, diverse ICR ratios from ~2 to ~170 can be achieved. Our findings shed light on the mechanism of ionic current rectification in ultra-short conical nanopores, and provide a useful guide to the design and modification of ultra-short conical nanopores in ionic circuits and nanofluidic sensors.

physics.chem-ph↗

arXiv2019

Effects of Surface Trapping and Contact Ion Pairing on Ion Transport in Nanopores

Ion transport in highly-confined space is important to various applications, such as biosensing and seawater desalination with nanopores. All-atom molecular dynamics simulations are conducted to investigate the transport of Na$^+$ and Cl$^-$ ions through nanopores with the diameter below 6 nm. It is found that the formation of the contact ion pair plays a critical role in reducing the ion mobility inside a nanopore without surface charges. The mobility for both cations and anions decreases with the reduced pore size because it is easier to form the contact ion pairs inside the neutral nanopore with smaller diameter. Inside a charged nanopores, besides the contact ion pair formation, the surface charges also play a significant role in reducing the counterion mobility through surface trapping. It is uncovered that the mobility of Na$^+$ ions increases first and then decreases with the surface charge density, while Cl$^-$ ions have the opposite trend. A modified first-passage time model is proposed to take into account the ion pair formation and the trapped ions inside a nanopore, which provides a clear picture in describing ion transport through a nanopore.

cond-mat.mes-hall↗

arXiv2018

Abnormal Ionic Current Rectification Caused by Reversed Electroosmotic Flow under Viscosity Gradients across Thin Nanopores

Single nanopores have attracted much scientific interest due to their versatile applications. The majority of experiments have been performed with nanopores being in contact with the same electrolyte on both sides of the membrane, while solution gradients across semi-permeable membranes are omnipresent in natural systems. In this manuscript, we studied ionic and fluidic movement through thin nanopores under viscosity gradients both experimentally and using simulations. Ionic current rectification was observed under these conditions, due to solutions with different conductivities filled across the pore under different biases caused by electroosmotic flow. We found that a pore filled with high viscosity solutions exhibited current increase with applied voltage in a steeper slope beyond a threshold voltage, which abnormally reduced the current rectification ratio. Through simulations, we found reversed electroosmotic flow that filled the pore with aqueous solutions of lower viscosities was responsible for this behavior. The reversed electroosmotic flow could be explained by slower depletion of coions than counterions along the pore. By increasing the surface charge density of pore surfaces, current rectification ratio could reach the value of the viscosity gradient across thin nanopores. Our findings shed light on fundamental aspects to be considered when performing experiments with viscosity gradients across nanopores and nanofluidic channels.

physics.chem-ph↗

arXiv2018

Optimal Voltage for Nanoparticle Detection with Thin Nanopores

The resistive-pulse technique provides a fast and label-free method for nanoparticle detection. In order to achieve a higher sensitivity, thin nanopores, such as silicon nitride pores, are usually considered. In this paper, nanoparticle detection has been mimicked by simulations. We found the surface charges of the particle can affect the current blockade obviously in short pores, especially under high electric fields. For particles with a surface charge density higher than -0.02 C/m2, its current blockade ratio depends on the applied voltage closely. From our simulation results, an optimal voltage can be found for the particle detection, under which the current blockade ratio does not depend on the surface charge density of the particle. This optimal voltage was obtained by the balance of current increase and decrease caused by cations and anions, respectively, due to the negative surface charges of particles. From the systematical study, the optimal voltage was found to work like a property of the system which only depends on the electrolyte type. We think our finding can provide some help to the accurate particle detection in experiments.

physics.chem-ph↗

arXiv2017

Capacitance Performance of Sub-2-nm Graphene Nanochannels in Aqueous Electrolyte

Molecular dynamics simulations were used to explain the origin and properties of electrical double-layer capacitance in short graphene nanochannels with width below 2 nm. The results explain the previously reported experimental result on the non-monotonic dependence of the capacitance with the channel width. The mechanism for the anomalous increase of the capacitance in sub-1-nm in pore diameter is attributed here to the width-dependent radial location of counterions in the nanochannels, and the restricted number of co-ions. Decrease of the channel width lowers the number of co-ions and positions the counterions closer to the channel walls. For nanochannels with width ranging from 1 to 2 nm, co-ions are allowed to enter the nanochannel, and both types of ions assume alternating layered distributions leading to the decrease of the capacitance. Voltage is another control parameter which allows understanding capacitance in graphene nanochannels. As the voltage increases, due to limited space near the charged surface, more counterions need to be located in the center of the nanochannel resulting in further capacitance decrease.

physics.chem-ph↗

arXiv2017

Ionic Behavior in Highly Concentrated Aqueous Solutions Nanoconfined between Discretely Charged Silicon Surfaces

Through molecular dynamics simulations considering thermal vibration of surface atoms, ionic behaviors in concentrated NaCl solutions confined between discretely charged silicon surfaces have been investigated. The electric double layer structure was found sensitive to the density and distribution of surface charges. Due to the surface charge discreteness, slight charge inversion appeared which depended on the surface charge density, bulk concentration and confinement. In the nanoconfined NaCl solutions differently concentrated from 0.2 M to 4.0 M, the locations of accumulation layers for Na+ and Cl- ions kept stable, but their peak values increased. The higher the concentration was, the more obvious charge inversion appeared. In 4.0 M NaCl solution, Na+ and Cl- ions show obvious alternating layered distributions which may be corresponding to the solidification found in experiments. By changing surface separation, the confinement had a large effect on ionic distributions. As both surfaces approached each other, many ions and water molecules were squeezed out of the confined space. Two adjacent layers in ion or water distribution profiles can be forced to closer to each other and merge together. From ionic hydration analysis, the coordination number of Na+ ions in highly-confined space was much lower than that in the bulk.

physics.chem-ph↗

arXiv2016

Counterions and water molecules in charged silicon nanochannels: the influence of surface charge discreteness

In order to detect the effect of the surface charge discreteness on the properties at the solid-liquid interface, molecular dynamics simulation model taking consideration of the vibration of wall atoms was used to investigate the ion and water performance under different charge distributions. Through the comparison between simulation results and the theoretical prediction, it was found that, with the degree of discreteness increasing, much more counterions were attracted to the surface. These ions formed a denser accumulating layer which located much nearer to the surface and caused charge inversion. The ions in this layer were non-hydrated or partially hydrated. When a voltage was applied across the nanochannel, this dense accumulating layer did not move unlike the ions near uniformly charged surface. From the water density profiles obtained in nanochannels with different surface charge distributions, the influence of the surface charge discreteness on the water distributions could be neglected.

physics.chem-ph↗

arXiv2016

Ion and water transport in charge-modified graphene nanopores

Porous graphene has high mechanical strength and atomic layer thickness, which make it a promising material for material separation and biomolecule sensing. Electrostatic interactions between charges in aqueous solution are a kind of strong long-range interaction which may have great influence on the fluid transport through nanopores. Here, molecular dynamics simulations were conducted to investigate ion and water transport through a 1.05-nm-in-diameter monolayer graphene nanopore with its edge charge-modified. From the results, it is found that the nanopores are selective to counterions when they are charged. As the charge amount increases, the total ionic currents show an increase-decrease profile while the co-ion currents monotonously decrease. The co-ions rejection can reach 75% and 90% when the nanopores are negatively and positively charged, respectively. Cl ions current increases and reaches a plateau, and Na+ current decreases with the charge amount in the systems where they act as counterions. Besides, the charge modification can enhance the water transport through nanopores obviously. This is mainly due to the ion selection of nanopores. Especially, positive charges on the pore edge facilitate the water transport much more than negative charges.

physics.chem-ph↗