arXiv subjects

Yingshan Zhang

Publications and source records attributed to Yingshan Zhang.

8 recordsLinked to original sources

arXiv2026

Demonstration of tripartite cat states in two distinct classes of entanglement

Entanglement is a cornerstone of quantum mechanics and an essential resource for quantum computation, communication, and metrology. While bipartite entanglement is extensively studied, genuine multipartite entangled states remain largely inaccessible in the macroscopic continuous-variable domain. Here, we experimentally realize macroscopic tripartite entangled cat states of the two distinct classes with fundamentally inequivalent properties, namely GHZ-cat and W-cat states, encoded across three microwave resonators coupled to an ancillary superconducting transmon. We develop one-to-all conditional controls on the three oscillators by fully utilizing three energy levels of the transmon to generate these states in a single piece of hardware and employ an efficient subspace tomography protocol for state reconstruction. We obtain GHZ-cat and W-cat states with fidelities $0.83\pm0.02$ and $0.70\pm0.02$, respectively, certifying genuine multipartite entanglement among the three oscillators. We further validate the distinct entanglement classes by experimentally demonstrating that pairwise entanglement is present in the W-cat state but absent in the GHZ-cat state. Our technique for the on-demand generation and characterization of inequivalent classes of tripartite continuous-variable entanglement provides a valuable testbed for future studies of macroscopic many-body entanglement and fault-tolerant quantum information processing with multipartite bosonic codes.

quant-ph↗

arXiv2024

Mapping Topology-Localization Phase Diagram with Quasiperiodic Disorder Using a Programmable Superconducting Simulator

We explore topology-localization phase diagram by simulating one-dimensional Su-Schrieffer-Heeger (SSH) model with quasiperiodic disorder using a programmable superconducting simulator. We experimentally map out and identify various trivial and topological phases with extended, critical, and localized bulk states. We find that with increasing disorder strength, some extended states can be first replaced by localized states and then by critical states before the system finally becomes fully localized. The critical states exhibit typical features such as multifractality and self-similarity, which lead to surprisingly rich phases with different types of mobility edges and scaling behaviors on the phase boundaries. Our results shed new light on the investigation of the topological and localization phenomena in condensed-matter physics.

quant-ph↗

arXiv2023

Performing SU($d$) operations and rudimentary algorithms in a superconducting transmon qudit for $d=3$ and $d=4$

Quantum computation architecture based on $d$-level systems, or qudits, has attracted considerable attention recently due to their enlarged Hilbert space. Extensive theoretical and experimental studies have addressed aspects of algorithms and benchmarking techniques for qudit-based quantum computation and quantum information processing. Here, we report a physical realization of qudit with upto 4 embedded levels in a superconducting transmon, demonstrating high-fidelity initialization, manipulation, and simultaneous multi-level readout. In addition to constructing SU($d$) operations and benchmarking protocols for quantum state tomography, quantum process tomography, and randomized benchmarking etc, we experimentally carry out these operations for $d=3$ and $d=4$. Moreover, we perform prototypical quantum algorithms and observe outcomes consistent with expectations. Our work will hopefully stimulate further research interest in developing manipulation protocols and efficient applications for quantum processors with qudits.

quant-ph↗

arXiv2022

Spurious microwave crosstalk in floating superconducting circuits

Crosstalk is a major concern in the implementation of large-scale quantum computation since it can degrade the performance of qubit addressing and cause gate errors. Finding the origin of crosstalk and separating contributions from different channels are essential prerequisites for figuring out crosstalk mitigation schemes. Here, by performing circuit analysis of two coupled floating transmon qubits, we demonstrate that, even if the stray coupling, e.g., between a qubit and the drive line of its nearby qubit, is absent, microwave crosstalk between qubits can still exist due to the presence of a spurious crosstalk channel. This channel arises from free modes, which are supported by the floating structure of transmon qubits, i.e., the two superconducting islands of each qubit with no galvanic connection to the ground. For various geometric layouts of floating transmon qubits, we give the contributions of microwave crosstalk from the spurious channel and show that this channel can become a performance-limiting factor in qubit addressing. This research could provide guidance for suppressing microwave crosstalk between floating superconducting qubits through the design of qubit circuits.

quant-ph↗

arXiv2022

Tunable coupling of widely separated superconducting qubits: A possible application towards a modular quantum device

Besides striving to assemble more and more qubits in a single monolithic quantum device, taking a modular design strategy may mitigate numerous engineering challenges for achieving large-scalable quantum processors with superconducting qubits. Nevertheless, a major challenge in the modular quantum device is how to realize high-fidelity entanglement operations on qubits housed in different modules while preserving the desired isolation between modules. In this work, we propose a conceptual design of a modular quantum device, where nearby modules are spatially separated by centimeters. In principle, each module can contain tens of superconducting qubits, and can be separately fabricated, characterized, packaged, and replaced. By introducing a bridge module between nearby qubit modules and taking the coupling scheme utilizing a tunable bus, tunable coupling of qubits that are housed in nearby qubit modules, could be realized. Given physically reasonable assumptions, we expect that sub-100-ns two-qubit gates for qubits housed in nearby modules which are spatially separated by more than two centimeters could be obtained. In this way, the inter-module gate operations are promising to be implemented with gate performance comparable with that of intra-module gate operations. Moreover, with help of through-silicon vias technologies, this long-range coupling scheme may also allow one to implement inter-module couplers in a multi-chip stacked processor. Thus, the tunable longer-range coupling scheme and the proposed modular architecture may provide a promising foundation for solving challenges toward large-scale quantum information processing with superconducting qubits.

quant-ph↗

arXiv2021

Vacuum-gap transmon qubits realized using flip-chip technology

Significant progress has been made in building large-scale superconducting quantum processors based on flip-chip technology. In this work, we use the flip-chip technology to realize a modified transmon qubit, donated as the "flipmon", whose large shunt capacitor is replaced by a vacuum-gap parallel plate capacitor. To further reduce the qubit footprint, we place one of the qubit pads and a single Josephson junction on the bottom chip and the other pad on the top chip which is galvanically connected with the single Josephson junction through an indium bump. The electric field participation ratio can arrive at nearly 53% in air when the vacuum-gap is about 5 microns, and thus potentially leading to a lower dielectric loss. The coherence times of the flipmons are measured in the range of 30-60 microseconds, which are comparable with that of traditional transmons with similar fabrication processes. The electric field simulation indicates that the metal-air interface's participation ratio increases significantly and may dominate the qubit's decoherence. This suggests that more careful surface treatment needs to be considered. No evidence shows that the indium bumps inside the flipmons cause significant decoherence. With well-designed geometry and good surface treatment, the coherence of the flipmons can be further improved.

quant-ph↗

arXiv2021

Transmon qubit with relaxation time exceeding 0.5 milliseconds

By using the dry etching process of tantalum (Ta) film, we had obtained transmon qubit with the best lifetime (T1) 503 us, suggesting that the dry etching process can be adopted in the following multi-qubit fabrication with Ta film. We also compared the relaxation and coherence times of transmons made with different materials (Ta, Nb and Al) with the same design and fabrication processes of Josephson junction, we found that samples prepared with Ta film had the best performance, followed by those with Al film and Nb film. We inferred that the reason for this difference was due to the different loss of oxide materials located at the metal-air interface.

quant-ph↗

arXiv2016

Quantum coherence between cavity and artificial atom in a superconducting circuit QED ladder system

We have created a quantum three-level ladder system with the cavity dispersive energy level in a superconducting circuit quantum electrodynamics system consisting of a transmon qubit and a cavity, and have directly observed the Autler-Townes splitting effect instead of representing it by the probability of the qubit being at each level. A coupler tone is applied on the transition between the second excited state of transmon and cavity dispersive level, while the cavity spectrum is probed. A doublet transmission and anormalous dispersion spectrum of the cavity level is clearly shown. The inverse Fourier transform of cavity spectrum indicates that there is a quantum coherence Rabi oscillation of the populations between cavity and qubit.

quant-ph↗