arXiv subjects

Yingzhen Liu

Publications and source records attributed to Yingzhen Liu.

3 recordsLinked to original sources

arXiv2019

T-A Formulation to Model Electrical Machines with HTS Coated Conductor Coils

Modelling high temperature superconductor (HTS) motors remains challenging mainly due to the high aspect ratio of these conductors but also because of the properties of the magnetic materials. This paper presents a 2D time dependent model to assess the AC losses of superconducting motors based on the new T-A formulation, which by using Finite Element Methods (FEM), allows its implementation in commercial software. The T-A formulation computes the magnetic flux density with different Maxwell's equations depending on the areas of the motor and makes it possible to use the thin strip approximation i.e. the HTS tapes are modelled as infinitely thin lines. The model is then expected to tackle the high aspect ratio of the HTS as well as decreasing both the mesh complexity and the computing time. The first objective of the paper is to validate the method in 2D by evaluating the AC losses of a specific synchronous motor called SUTOR; the computed results are compared with good agreements to those assessed with the MEMEP method, already validated. In a second part, the same losses are computed, taking into account the anisotropy of Jc with the implementation of a data set based on experimentally measured Ic at 65 K and 77 K.

cond-mat.supr-con↗

arXiv2019

AC loss modelling in superconducting coils and motors with parallel tapes as conductor

Many superconducting power applications contain REBCO coils. Superconducting motors are very interesting for mobile applications like aviation, thanks to their high power per unit weight. In order to reduce the inductance, multi-tape conductors are often used in windings but parallel tapes present coupling AC loss. In this article, we analyze the AC loss of single coils and a full stator of a motor made of windings of parallel tapes, taking several coupling situations into account. Our computer modeling method combines self-programmed and commercial finite-element methods to calculate the current density and AC loss. We found that isolating the tapes along the length provides almost the same AC loss reduction as that obtained by full transposition. This reveals that there are still many unexploited strategies to reduce the AC loss in multi-tape conductors.

cond-mat.supr-con↗

arXiv2018

Comparison of 2D simulation models to estimate the critical current of a coated superconducting coil

Superconductors have been being applied to a variety of large-scale power applications, including magnets, electric machines, and fault current limiters, because they can enable a compact, lightweight and high efficiency design. In applications such those mentioned above, superconducting coils are always a key component. For example, in a superconducting electric machine, the superconducting coils are used to generate the main flux density in the air gap, which is significantly important for the energy conversion. It is the performance of the superconducting coils that plays an essential role in determining the performance of the device. However, the performance of a superconducting coil is limited by its critical current, which is determined by temperature and the magnitude and orientation of the magnetic field inside the superconductors. Hence, in-depth investigations to estimate the critical current of the superconducting coils are necessary before manufacturing. Available transient simulation models to estimate the critical current are through the H- and T-A formulations of Maxwell's equations. Both methods consider the same current ramp-up process occurring in experiments. Besides these transient models, static simulations can also be used: a modified load-line method and the so-called P-model, which is based on the asymptotic limit of Faraday's equation when time approaches infinity. To find the best way to calculate the critical current, the four methods are used to estimate the critical current of a double pancake superconducting coils and results are compared with experiments. As a conclusion, T-A formulation, P-model, and the modified load-line methods are recommended for estimating the critical current of the superconducting coils.

cond-mat.supr-con↗