arXiv subjects

Yinke Cheng

Publications and source records attributed to Yinke Cheng.

7 recordsLinked to original sources

arXiv2025

Perfect continuous-variable quantum microcombs

Quantum microcombs generated in high-Q microresonators provide compact, multiplexed sources of entangled modes for continuous-variable (CV) quantum information processing. While deterministic generation of CV states via Kerr-induced two-mode squeezing has been demonstrated, achieving spectrally uniform squeezing remains challenging because of asymmetry and anomalies in the dispersion profile. Here we overcome these limitations by combining a microresonator with an engineered mode spectrum and optimized pump conditions. We realize a CV quantum microcomb comprising 14 independent two-mode squeezed states, each exhibiting more than 4 dB of raw squeezing (up to 4.3 dB) across a 0.7 THz bandwidth. This uniform, high-performance quantum resource represents a key step toward scalable, integrated CV quantum technologies operating beyond classical limits.

quant-ph↗

arXiv2025

Communication-ready high-power soliton microcombs in highly-dispersive Fabry-Perot-microresonators

Microcombs generated in optical microresonators are widely regarded as promising light sources for next-generation communication systems, but the optical power available per comb line has so far fallen short of practical requirements. Here we introduce an integrated Fabry-P\'erot microresonator platform that overcomes fundamental dispersion-engineering constraints and enables bright soliton microcombs with unprecedented power per line. The resonator is defined by chirped Bragg gratings that provide exceptionally large anomalous group-velocity dispersion, allowing more than ten comb lines to reach the milliwatt level. These combs can be used directly in coherent communication systems without additional amplification, achieving an aggregate data rate of 2 Tb/s. Once integrated, our high-power soliton microcombs could be instantly ready for communications as well as a broad range of practical comb-based applications.

physics.optics↗

arXiv2025

Power-efficient ultra-broadband soliton microcombs in resonantly-coupled microresonators

The drive to miniaturize optical frequency combs for practical deployment has spotlighted microresonator solitons as a promising chip-scale candidate. However, these soliton microcombs could be very power-hungry when their span increases, especially with fine comb spacings. As a result, realizing an octave-spanning comb at microwave repetition rates for direct optical-microwave linkage is considered not possible for photonic integration due to the high power requirements. Here, we introduce the concept of resonant-coupling to soliton microcombs to reduce pump consumption significantly. Compared to conventional waveguide-coupled designs, we demonstrate (i) a threefold increase in spectral span for high-power combs and (ii) up to a tenfold reduction in repetition frequency for octave-spanning operation. This configuration is compatible with laser integration and yields reliable, turnkey soliton generation. By eliminating the long-standing pump-power bottleneck, microcombs will soon become readily available for portable optical clocks, massively parallel data links, and field-deployable spectrometers.

physics.optics↗

arXiv2025

Compact Turnkey Soliton Microcombs at Microwave Rates via Wafer-Scale Fabrication

Soliton microcombs generated in nonlinear microresonators facilitate the photonic integration of timing, frequency synthesis, and astronomical calibration functionalities. For these applications, low-repetition-rate soliton microcombs are essential as they establish a coherent link between optical and microwave signals. However, the required pump power typically scales with the inverse of the repetition rate, and the device footprint scales with the inverse of square of the repetition rate, rendering low-repetition-rate soliton microcombs challenging to integrate within photonic circuits. This study designs and fabricates silicon nitride microresonators on 4-inch wafers with highly compact form factors. The resonator geometries are engineered from ring to finger and spiral shapes to enhance integration density while attaining quality factors over 10^7. Driven directly by an integrated laser, soliton microcombs with repetition rates below 10 GHz are demonstrated via turnkey initiation. The phase noise performance of the synthesized microwave signals reaches -130 dBc/Hz at 100 kHz offset frequency for 10 GHz carrier frequencies. This work enables the high-density integration of soliton microcombs for chip-based microwave photonics and spectroscopy applications.

physics.optics↗

arXiv2024

Large-scale cluster quantum microcombs

An optical frequency comb comprises a cluster of equally spaced, phase-locked spectral lines. Replacing these classical components with correlated quantum light gives rise to cluster quantum frequency combs, providing abundant quantum resources for measurement-based quantum computation and multi-user quantum networks. We propose and generate cluster quantum microcombs within an on-chip optical microresonator driven by multi-frequency lasers. Through resonantly enhanced four-wave mixing processes, continuous-variable cluster states with 60 qumodes are deterministically created. The graph structures can be programmed into one- and two-dimensional lattices by adjusting the configurations of the pump lines, which are confirmed inseparable based on the measured covariance matrices. Our work demonstrates the largest-scale cluster states with unprecedented raw squeezing levels from a photonic chip, offering a compact and scalable platform for computational and communicational tasks with quantum advantages.

physics.optics↗

arXiv2023

Inverse design of coherent supercontinuum generation using free-form nanophotonic waveguides

Many key functionalities of optical frequency combs such as self-referencing and broad spectral access rely on coherent supercontinuum generation (SCG). While nanophotonic waveguides have emerged as a compact and power-efficient platform for SCG, their geometric degrees of freedom have not been fully utilized due to the underlying nonlinear and stochastic physics. Here, we introduce inverse design to unlock free-form waveguides for coherent SCG. The efficacy of our design is numerically and experimentally demonstrated on Si3N4 waveguides, producing flat and coherent spectra from visible to mid-infrared wavelengths. Our work has direct applications in developing chip-based broadband light sources for spectroscopy, metrology, and sensing across multiple spectral regimes.

physics.optics↗

arXiv2022

Integrated vortex soliton microcombs

The frequency and orbital angular momentum (OAM) are independent physical properties of light that both offer unbounded degrees of freedom. However, creating, processing, and detecting high-dimensional OAM states have been a pivot and long-lasting task, as the complexity of the required optical systems scales up drastically with the OAM dimension. On the other hand, mature toolboxes -- such as optical frequency combs -- have been developed in the frequency domain for parallel measurements with excellent fidelity. Here we correlate the two dimensions into an equidistant comb structure on a photonic chip. Dissipative optical solitons formed in a nonlinear microresonator are emitted through the engraved angular gratings with each comb line carrying distinct OAM. Such one-to-one correspondence between the OAM and frequencies manifests state-of-the-art extinction ratios over 18.5 dB, enabling precision spectroscopy of optical vortices. The demonstrated vortex soliton microcombs provide coherent light sources that are multiplexed in the spatial and frequency domain, having the potential to establish a new modus operandi of high-dimensional structured light.

physics.optics↗