arXiv subjects

Yinqi Wang

Publications and source records attributed to Yinqi Wang.

6 recordsLinked to original sources

arXiv2026

Highly efficient difference-frequency generation for mid-infrared pulses by passively synchronous seeding

We have proposed and experimentally demonstrated a novel scheme for efficient mid-infrared difference-frequency generation based on passively synchronized fiber lasers. The adoption of coincident seeding pulses in the nonlinear conversion process could substantially lower the pumping threshold for mid-infrared parametric emission. Consequently, a picosecond mid-infrared source at 3.1 $\mu$m was prepared with watt-level average power, and a maximum power conversion efficiency of 77\% was realized from pump to down-converted light. Additionally, the long-term stability of generated power was manifested with a relative fluctuation as low as 0.17\% over one hour. Thanks to the all-optical passive synchronization and all-polarization-maintaining fiber architecture, the implemented laser system was also featured with simplicity, compactness and robustness, which would favor subsequent applications beyond laboratory operation.

physics.optics↗

arXiv2026

Mid-infrared photon counting and resolving via efficient frequency upconversion

Optical detectors with single-photon sensitivity and large dynamic range would facilitate a variety of applications. Especially, the capability of extending operation wavelengths into the mid-infrared region is highly attractive. Here we implement a mid-infrared frequency upconversion detector for counting and resolving photons at 3 $\mu$m. Thanks to the spectro-temporal engineering of the involved optical fields, the mid-infrared photons could be spectrally translated into the visible band with a conversion efficiency of 80\%. In combination with a silicon avalanche photodiode, we obtained unprecedented performances with a high overall detection efficiency of 37\% and a low noise equivalent power of 1.8$\times$10$^{-17}$ W/Hz$^{1/2}$. Furthermore, photon-number-resolving detection at mid-infrared wavelengths was demonstrated, for the first time to our knowledge, with a multi-pixel photon counter. The implemented upconversion detector exhibited a maximal resolving photon number up to 9 with a noise probability per pulse of 0.14\% at the peak detection efficiency. The achieved photon counting and resolving performance might open up new possibilities in trace molecule spectroscopy, sensitive biochemical sensing, and free-space communications, among others.

physics.optics↗

arXiv2026

Highly sensitive detection for infrared photons by non-degenerate two-photon absorption under mid-infrared pumping

We have demonstrated highly-sensitive photon counting in the infrared based on the two-photon absorption (2PA) in a silicon avalanche photodiode, where the required photon energy for inducing effective conductivity was provided by an intense mid-infrared (MIR) field at 3 $\mu$m. The used MIR pumping scheme could not only benefit from the enhanced 2PA coefficient in the non-degenerate regime, but also eliminate the detrimental background noises due to the pump harmonic excitation of the pump. Consequently, the enhancement factor for the signal counting rate unprecedented reached to about $10^{5}$ with input infrared pulses at the femtojoule level. Additionally, the noise equivalent power was substantially improved by two orders of magnitude comparing to conventional schemes with near-infrared pumping. Therefore, the presented configuration might provide an alternative to realize sensitive infrared detection and imaging with desirable features of room-temperature operation, no phase-matching requirement, and broadband responding window, which would find a variety of applications including remote ranging, sensitive sensing, biochemical imaging, and trace spectroscopy.

physics.optics↗

arXiv2026

Mid-Infrared Single-Photon Edge Enhanced Imaging based on Nonlinear Vortex Filtering

Edge enhanced imaging via the spiral phase contrast enables to reveal the phase or amplitude gradients of a target, which has been proved useful in feature recognition, machine vision, and object identification. A long quest is to extend the operation wavelength into the mid-infrared (MIR) region, as highly demanded in various fields including infrared sensing, astronomic observation, and biomedical diagnosis. Here, we demonstrated ultra-sensitive MIR imaging at the single-photon level based on nonlinear frequency upconversion, where the spectrally converted replica of the MIR object image at 3070 nm was captured by a silicon electron multiplying charged coupled device. The imaging sensitivity was significantly improved by the coincidence pulsed pumping with a spectro-temporal optimization. Furthermore, the edge enhancement has been realized by imprinting the spiral phase pattern of the pump onto the upconverted field at the Fourier plane within the nonlinear crystal. Such a nonlinear spatial filter not only provided an effective way to implement the required high-fidelity vortex screening in the edge enhanced detection, but also rendered the MIR illumination into a visible image in an efficient and low-noise fashion. The presented system for MIR edge enhanced imaging might facilitate immediate applications in label-free histopathological diagnosis and non-destructive defect inspection.

physics.optics↗

arXiv2026

Single-Photon Infrared Imaging with a Silicon Camera Based on Long-Wavelength-Pumping Two-Photon Absorption

We experimentally demonstrated an ultra-sensitive imaging system for telecom photons based on the non-degenerate two-photon absorption in a silicon-based electron multiplying charge-coupled device (EMCCD). The proposed long-wavelength-pumping scheme with mid-infrared pulsed excitation could not only effectively increase the two-photon absorption coefficient, but also significantly suppress the background noise caused by the harmonic absorption of the strong pumping field. In comparison to the photoelectric response via the degenerate two-photon absorption, the implemented configuration could offer over 30-folded enhancement of the photon-counting rate in the infrared imaging. The resulting detection sensitivity up to 1 photon/pixel/pulse was unprecedentedly approached, thus facilitating the single-photon operation. The elimination of the stringent phase matching as typically required in the optical parametric conversion has led to a high spatial resolution of 13 $\mu$m. Moreover, the on-chip nonlinearity of the optical imager would enable a broadband spectral window and an enlarged field of view. In combination with the 5-ps temporal resolution due to the coincident optical gating, the presented imaging system would find various promising applications, such as low-light fluorescence lifetime microscopy and photon counting time-of-flight 3D imaging.

physics.optics↗

arXiv2026

Mid-infrared single-pixel imaging at the single-photon level

Single-pixel cameras have recently emerged as promising alternatives to multi-pixel sensors due to reduced costs and superior durability, which are particularly attractive for mid-infrared (MIR) imaging pertinent to applications including industry inspection and biomedical diagnosis. To date, MIR single-pixel photon-sparse imaging has yet been realized, which urgently calls for high-sensitivity optical detectors and high-fidelity spatial modulators. Here, we demonstrate a MIR single-photon computational imaging with a single-element silicon detector. The underlying methodology relies on nonlinear structured detection, where the encoded time-varying pump patterns are optically imprinted onto the MIR object image through sum-frequency generation. Simultaneously, the MIR radiation is spectrally translated into the visible region, thus permitting infrared single-photon upconversion detection. Then, the use of advanced algorithms of compress sensing and deep learning allows us to reconstruct MIR images under sub-Nyquist sampling and photon-starving illumination. The presented paradigm of single-pixel upconversion imaging is featured with single-pixel simplicity, single-photon sensitivity, and room-temperature operation, which would establish a new path for sensitive imaging at longer infrared wavelengths or terahertz frequencies, where high-sensitivity photon counters and high-fidelity spatial modulators are typically hard to access.

physics.optics↗