arXiv subjects

Yirong Jin

Publications and source records attributed to Yirong Jin.

30 records · Page 2Linked to original sources

arXiv2022

Combating fluctuations in relaxation times of fixed-frequency transmon qubits with microwave-dressed states

With the long coherence time, the fixed-frequency transmon qubit is a promising qubit modality for quantum computing. Currently, diverse qubit architectures that utilize fixed-frequency transmon qubits have been demonstrated with high-fidelity gate performance. Nevertheless, the relaxation times of transmon qubits can have large temporal fluctuations, causing instabilities in gate performance. The fluctuations are often believed to be caused by nearly on-resonance couplings with sparse two-level-system (TLS) defects. To mitigate their impact on qubit coherence and gate performance, one direct approach is to tune the qubits away from these TLSs. In this work, to combat the potential TLS-induced performance fluctuations in a tunable-bus architecture unitizing fixed-frequency transmon qubits, we explore the possibility of using an off-resonance microwave drive to effectively tuning the qubit frequency through the ac-Stark shift while implementing universal gate operations on the microwave-dressed qubit. We show that the qubit frequency can be tuned up to 20 MHz through the ac-stark shift while keeping minimal impacts on the qubit control. Besides passive approaches that aim to remove these TLSs through more careful treatments of device fabrications, this work may offer an active approach towards mitigating the TLS-induced performance fluctuations in fixed-frequency transmon qubit devices.

quant-ph↗

arXiv2022

Tunable coupling of widely separated superconducting qubits: A possible application towards a modular quantum device

Besides striving to assemble more and more qubits in a single monolithic quantum device, taking a modular design strategy may mitigate numerous engineering challenges for achieving large-scalable quantum processors with superconducting qubits. Nevertheless, a major challenge in the modular quantum device is how to realize high-fidelity entanglement operations on qubits housed in different modules while preserving the desired isolation between modules. In this work, we propose a conceptual design of a modular quantum device, where nearby modules are spatially separated by centimeters. In principle, each module can contain tens of superconducting qubits, and can be separately fabricated, characterized, packaged, and replaced. By introducing a bridge module between nearby qubit modules and taking the coupling scheme utilizing a tunable bus, tunable coupling of qubits that are housed in nearby qubit modules, could be realized. Given physically reasonable assumptions, we expect that sub-100-ns two-qubit gates for qubits housed in nearby modules which are spatially separated by more than two centimeters could be obtained. In this way, the inter-module gate operations are promising to be implemented with gate performance comparable with that of intra-module gate operations. Moreover, with help of through-silicon vias technologies, this long-range coupling scheme may also allow one to implement inter-module couplers in a multi-chip stacked processor. Thus, the tunable longer-range coupling scheme and the proposed modular architecture may provide a promising foundation for solving challenges toward large-scale quantum information processing with superconducting qubits.

quant-ph↗

arXiv2022

Quantum crosstalk analysis for simultaneous gate operations on superconducting qubits

Maintaining or even improving gate performance with growing numbers of parallel controlled qubits is a vital requirement for fault-tolerant quantum computing. For superconducting quantum processors, though isolated one- or two-qubit gates have been demonstrated with high-fidelity, implementing these gates in parallel commonly shows worse performance. Generally, this degradation is attributed to various crosstalks between qubits, such as quantum crosstalk due to residual inter-qubit coupling. An understanding of the exact nature of these crosstalks is critical to figuring out respective mitigation schemes and improved qubit architecture designs with low crosstalk. Here we give a theoretical analysis of quantum crosstalk impact on simultaneous gate operations in a qubit architecture, where fixed-frequency transmon qubits are coupled via a tunable bus, and sub-100-ns controlled-Z (CZ) gates can be realized by applying a baseband flux pulse on the bus. Our analysis shows that for microwave-driven single-qubit gates, the dressing from the qubit-qubit coupling can cause non-negligible cross-driving errors when qubits operate near frequency collision regions. During CZ gate operations, although unwanted near-neighbor interactions are nominally turned off, sub-MHz parasitic next-near-neighbor interactions involving spectator qubits can still exist, causing considerable leakage or control error when one operates qubit systems around these parasitic resonance points. To ensure high-fidelity simultaneous operations, there could raise a request to figure out a better way to balance the gate error from target qubit systems themselves and the error from non-participating spectator qubits. Overall, our analysis suggests that towards useful quantum processors, the qubit architecture should be examined carefully in the context of high-fidelity simultaneous gate operations in a scalable qubit lattice.

quant-ph↗

arXiv2022

Quantum circuit architecture search on a superconducting processor

Variational quantum algorithms (VQAs) have shown strong evidences to gain provable computational advantages for diverse fields such as finance, machine learning, and chemistry. However, the heuristic ansatz exploited in modern VQAs is incapable of balancing the tradeoff between expressivity and trainability, which may lead to the degraded performance when executed on the noisy intermediate-scale quantum (NISQ) machines. To address this issue, here we demonstrate the first proof-of-principle experiment of applying an efficient automatic ansatz design technique, i.e., quantum architecture search (QAS), to enhance VQAs on an 8-qubit superconducting quantum processor. In particular, we apply QAS to tailor the hardware-efficient ansatz towards classification tasks. Compared with the heuristic ansatze, the ansatz designed by QAS improves test accuracy from 31% to 98%. We further explain this superior performance by visualizing the loss landscape and analyzing effective parameters of all ansatze. Our work provides concrete guidance for developing variable ansatze to tackle various large-scale quantum learning problems with advantages.

quant-ph↗

arXiv2021

Realizing discrete time crystal in an one-dimensional superconducting qubit chain

Floquet engineering, i.e. driving the system with periodic Hamiltonians, not only provides great flexibility in analog quantum simulation, but also supports phase structures of great richness. It has been proposed that Floquet systems can support a discrete time-translation symmetry (TTS) broken phase, dubbed the discrete time crystal (DTC). This proposal, as well as the exotic phase, has attracted tremendous interest among the community of quantum simulation. Here we report the observation of the DTC in an one-dimensional superconducting qubit chain. We experimentally realize long-time stroboscopic quantum dynamics of a periodically driven spin system consisting of 8 transmon qubits, and obtain a lifetime of the DTC order limited by the coherence time of the underlying physical platform. We also explore the crossover between the discrete TTS broken and unbroken phases via various physical signatures. Our work extends the usage of superconducting circuit systems in quantum simulation of many-body physics, and provides an experimental tool for investigating non-equilibrium dynamics and phase structures.

quant-ph↗

arXiv2021

Vacuum-gap transmon qubits realized using flip-chip technology

Significant progress has been made in building large-scale superconducting quantum processors based on flip-chip technology. In this work, we use the flip-chip technology to realize a modified transmon qubit, donated as the "flipmon", whose large shunt capacitor is replaced by a vacuum-gap parallel plate capacitor. To further reduce the qubit footprint, we place one of the qubit pads and a single Josephson junction on the bottom chip and the other pad on the top chip which is galvanically connected with the single Josephson junction through an indium bump. The electric field participation ratio can arrive at nearly 53% in air when the vacuum-gap is about 5 microns, and thus potentially leading to a lower dielectric loss. The coherence times of the flipmons are measured in the range of 30-60 microseconds, which are comparable with that of traditional transmons with similar fabrication processes. The electric field simulation indicates that the metal-air interface's participation ratio increases significantly and may dominate the qubit's decoherence. This suggests that more careful surface treatment needs to be considered. No evidence shows that the indium bumps inside the flipmons cause significant decoherence. With well-designed geometry and good surface treatment, the coherence of the flipmons can be further improved.

quant-ph↗

arXiv2021

Transmon qubit with relaxation time exceeding 0.5 milliseconds

By using the dry etching process of tantalum (Ta) film, we had obtained transmon qubit with the best lifetime (T1) 503 us, suggesting that the dry etching process can be adopted in the following multi-qubit fabrication with Ta film. We also compared the relaxation and coherence times of transmons made with different materials (Ta, Nb and Al) with the same design and fabrication processes of Josephson junction, we found that samples prepared with Ta film had the best performance, followed by those with Al film and Nb film. We inferred that the reason for this difference was due to the different loss of oxide materials located at the metal-air interface.

quant-ph↗

arXiv2021

Observation of Bloch Oscillations and Wannier-Stark Localization on a Superconducting Processor

The Bloch oscillation (BO) and Wannier-Stark localization (WSL) are fundamental concepts about metal-insulator transitions in condensed matter physics. These phenomena have also been observed in semiconductor superlattices and simulated in platforms such as photonic waveguide arrays and cold atoms. Here, we report experimental investigation of BOs and WSL simulated with a 5-qubit programmable superconducting processor, of which the effective Hamiltonian is an isotropic $XY$ spin chain. When applying a linear potential to the system by properly tuning all individual qubits, we observe that the propagation of a single spin on the chain is suppressed. It tends to oscillate near the neighborhood of their initial positions, which demonstrates the characteristics of BOs and WSL. We verify that the WSL length is inversely correlated to the potential gradient. Benefiting from the precise single-shot simultaneous readout of all qubits in our experiments, we can also investigate the thermal transport, which requires the joint measurement of more than one qubits. The experimental results show that, as an essential characteristic for BOs and WSL, the thermal transport is also blocked under a linear potential. Our experiment would be scalable to more superconducting qubits for simulating various of out-of-equilibrium problems in quantum many-body systems.

quant-ph↗

arXiv2020

Realisation of adiabatic and diabatic CZ gates in superconducting qubits coupled with a tunable coupler

High fidelity two-qubit gates are fundamental for scaling up the superconducting number. We use two qubits coupled via a frequency-tunable coupler which can adjust the coupling strength, and demonstrate the CZ gate using two different schemes, adiabatic and diabatic methods. The Clifford based Randomized Benchmarking (RB) method is used to assess and optimize the CZ gate fidelity. The fidelity of adiabatic and diabatic CZ gates are 99.53(8)% and 98.72(2)%, respectively. We also analyze the errors induced by the decoherence. Comparing to 30 ns duration time of adiabatic CZ gate, the duration time of diabatic CZ gate is 19 ns, revealing lower incoherence error rate $r'_{\rm{incoherent, int}}$ = 0.0197(5) than $r_{\rm{incoherent, int}}$ = 0.0223(3).

quant-ph↗

arXiv2020

Characterize noise correlation and enhance coherence via qubit motion

The identification of spacial noise correlation is of critical importance in developing error-corrected quantum devices, but it has barely been studied so far. In this work, we utilize an effective new method called qubit motion, to efficiently determine the noise correlations between any pair of qubits in a 7-qubit superconducting quantum system. The noise correlations between the same pairs of qubits are also investigated when the qubits are at distinct operating frequencies. What's more, in this multi-qubit system with the presence of noise correlations, we demonstrate the enhancing effect of qubit motion on the coherence of logic qubit, and we propose a Motion-CPMG operation sequence to more efficiently protect the logic state from decoherence, which is experimentally demonstrated to extend the decoherence time of logic qubit by nearly one order of magnitude.

quant-ph↗

arXiv2017

High Quality Stepped-Impedance Resonators Suitable for Circuit-QED Measurement of Superconducting Artificial Atoms

High quality factor coplanar resonators are critical elements in superconducting quantum circuits. We describe the design, fabrication and measurement of stepped impedance resonators (SIRs), which are more compact in size than commonly used uniform impedance resonators (UIRs). With properly chosen impedance ratio, SIRs can be 27% shorter than UIRs. As a result, the area occupied by SIRs can be reduced. Two kinds of designs containing both SIRs and UIRs are fabricated and measured. The power dependence of the extracted internal quality factors (Qi) for all the resonators showed that SIRs and UIRs have comparable performance with Qi around half-million under single-photon level excitation. These results indicate that SIRs could be used in superconducting quantum circuits. The reduced size of SIRs may also lead to reduced overall circuit area and increased integration level.

quant-ph↗

arXiv2014

Fabrication of superconducting nanowires based on ultra-thin Nb films by means of nanoimprint lithography

Nanoimprint lithography (NIL) is an attractive nonconventional lithographic technique in the fabrication of superconducting nanowires for superconducting nanowire single-photon detectors (SNSPDs) with large effective detection areas or multi-element devices consisting of hundreds of SNSPDs, due to its low cost and high throughput. In this work, NIL was used to pattern superconducting nanowires with meander-type structures based on ultra-thin (~4 nm) Nb films deposited by DC-magnetron sputtering at room temperature. A combination of thermal-NIL and UV-NIL was exploited to transfer the meander pattern from the imprint hard mold to Nb films. The hard mold based on Si wafer was defined by e-beam lithography (EBL), which was almost nonexpendable due to the application of IPS as a soft mold to transfer the patterns to the imprint resist in the NIL process. The specimens fabricated by NIL keep good superconducting properties which are comparable to that by conventional EBL process.

cond-mat.supr-con↗