arXiv subjects

Yiwen Chu

Publications and source records attributed to Yiwen Chu.

At least 19 recordsLinked to original sources

arXiv2026

How to Test Bell Nonlocality for Gravity?

We propose an experiment to test Bell nonlocality, a genuine nonclassicality, for the gravitational field. Two masses with embedded entangled spins (e.g., two diamonds with their NV-centre spins entangled) are placed well outside each other's light cones, ensuring a locality-loophole-free scenario. The spins are then coupled to the motion of their respective masses to generate spatial superpositions. Finally, local measurements are performed only on the gravitational fields of the two masses. If gravity is quantum, then the two entangled masses would entangle their gravitational fields, leading to correlations certifying Bell nonlocality of gravity. Trapped and ground-state cooled nano-objects with micron-sized spatial superposition are sufficient for this test. This goes beyond the recent proposals to test nonclassicality of gravity by providing, for the first time in the literature, a minimal tool to (i) create Einstein-Podolsky-Rosen (EPR) state of gravitational curvatures, (ii) witness entangled gravitational curvatures, (iii) rule out any local-realist description of gravity, and (iv) achieve a loophole-free test of gravity's nonclassicality in a fully device-independent way.

quant-ph↗

arXiv2026

Einstein-Podolsky-Rosen correlations between mechanical oscillators revealed through SU(1,1) interferometry

Quantum correlations are essential for achieving quantum advantage in computing, communication and sensing. Moreover, their observation challenges and constrains our fundamental understanding of nature. Mechanical oscillators in the quantum regime provide an appealing platform for preparing and investigating quantum correlations at macroscopic scales. Despite substantial progress, however, continuous-variable quantum correlations stronger than entanglement have not yet been observed in this macroscopic regime. Here, we report the experimental observation of continuous-variable Einstein-Podolsky-Rosen correlations between two spatially-separated mechanical oscillators with an effective mass of $\sim 16 \,\mu g$ each. This is achieved by coupling them to a superconducting qubit which allows for engineering a two-mode squeezing interaction when parametrically driven. Crucially, we show that this interaction can be used to witness quantum correlations through the realization of a mechanical SU(1,1) interferometer. Our results expand the toolbox of operations in circuit quantum acoustodynamics and demonstrate that quantum correlations stronger than entanglement can also be observed in macroscopic systems, thereby shedding light on the boundary between quantum and classical regimes.

quant-ph↗

arXiv2026

High-Fidelity Transmon Reset with a Multimode Acoustic Resonator

Achieving sufficiently low residual excited-state populations remains a key challenge in superconducting quantum circuits, particularly for protocols operating close to noise limits or requiring repeated qubit initialization. Existing protocols primarily address this challenge through sophisticated control, engineered dissipation, or feedback mechanisms. Here, we demonstrate an alternative approach in which a superconducting qubit is reset using a physically distinct, intrinsically colder phononic bath. Specifically, we interface a transmon with a high-overtone bulk acoustic resonator (HBAR), enabling cooling of the qubit into GHz-frequency modes. Using this approach, we achieve a residual excited-state population of the qubit below $10^{-4}$, representing an improvement of one to two orders of magnitude compared to existing reset schemes. These results highlight the potential of phononic baths as a resource for high-fidelity qubit initialization in superconducting circuits.

quant-ph↗

arXiv2026

Loss Mechanisms in High-coherence Multimode Mechanical Resonators Coupled to Superconducting Circuits

Circuit quantum acoustodynamics (cQAD) devices have a wide range of applications in quantum science, all of which depend crucially on the quantum coherence of the mechanical subsystem. In this context, high-overtone bulk acoustic-wave resonators (HBARs) are particularly promising, since they have shown very high quality factors with negligible dephasing. However, the introduction of piezoelectric films, which are necessary for coupling to a superconducting circuit, can lead to additional loss channels, such as surface scattering and two-level systems (TLS). Here, we study the acoustic dissipation of HBAR resonators in cQAD systems and find that the defect density of the piezoelectric material and its interface with the bulk are limiting factors for the coherence. We measure acoustic modes with phonon lifetimes up to 400 $\mu$s and lifetime-limited coherence times approaching one millisecond in the quantum regime. When coupled to a superconducting qubit, this leads to a hybrid system with a large quantum coherence cooperativity of $C_{T_2}=1.1\times10^5$. These results represent a new milestone for the performance of cQAD devices and offer concrete paths forward for further improvements.

quant-ph↗

arXiv2026

Mechanical Resonator-based Quantum Computing

Hybrid quantum systems combine the unique advantages of different physical platforms with the goal of realizing more powerful and practical quantum information processing devices. Mechanical systems, such as bulk acoustic wave resonators, feature a large number of highly coherent harmonic modes in a compact footprint, which complements the strong nonlinearities and fast operation times of superconducting quantum circuits. Here, we demonstrate an architecture for mechanical resonator-based quantum computing, in which a superconducting qubit is used to perform quantum gates on a collection of mechanical modes. We show the implementation of a universal gate set, composed of single-qubit gates and controlled arbitrary-phase gates, and showcase their use in the quantum Fourier transform and quantum period finding algorithms. These results pave the way toward using mechanical systems to build crucial components for future quantum technologies, such as quantum random-access memories.

quant-ph↗

arXiv2025

Ultracold Mechanical Quantum Sensor for Tests of New Physics

Initialization of mechanical modes in the quantum ground state is crucial for their use in quantum information and quantum sensing protocols. In quantum processors, impurity of the modes' initial state affects the infidelity of subsequent quantum algorithms. In quantum sensors, excitations out of the ground state contribute to the noise of the detector, and their prevalence puts a bound on rare events that deposit energy into the mechanical modes. In this work, we measure the excited-state populations of GHz-frequency modes in a high-overtone bulk acoustic wave resonator (HBAR). We find that the population of the first excited state can be as low as $P_p$=(1.2$\pm$5.5)$\times10^{-5}$, corresponding to an effective temperature of 25.2 mK, which are upper bounds limited by imperfections in the measurement process. These results compare favorably to the lowest populations measured in superconducting circuits. Finally, we use the measured populations to constrain the amplitude of high-frequency gravitational waves, the kinetic mixing strength of ultra-light dark matter, and non-linear modifications of the Schr\"{o}dinger equation describing wavefunction collapse mechanisms. Our work establishes HBARs as a versatile resource for quantum state initialization and studies of fundamental physics.

quant-ph↗

arXiv2025

Genuine quantum non-Gaussianity and metrological sensitivity of Fock states prepared in a mechanical resonator

Fock states of the quantum harmonic oscillator are fundamental to quantum sensing and information processing, serving as key resources for exploiting bosonic degrees of freedom. Here, we prepare high Fock states in a high-overtone bulk acoustic wave resonator (HBAR) by coupling it to a superconducting qubit and applying microwave pulses designed using quantum optimal control. We characterize the experimentally realized states by employing a criterion for genuine quantum non-Gaussianity (QNG) designed to reveal multiphonon contributions. Although energy relaxation and decoherence limit the achievable fidelities, we demonstrate genuine QNG features compatible with Fock state $\vert 6\rangle$, confirming that the prepared states cannot be generated through Gaussian operations on states with up to Fock state $\vert 5\rangle$ contributions. We further investigate the robustness of these QNG features to losses and their utility in sensing displacement amplitudes. In particular, we introduce a hierarchy based on the quantum Fisher information and show that, despite decoherence and measurement imperfections, the prepared states achieve a displacement sensitivity surpassing that of an ideal Fock state $\vert 3\rangle$. Our results have immediate applications in quantum sensing and simulations with HBAR devices.

quant-ph↗

arXiv2024

A mechanical qubit

Strong nonlinear interactions between quantized excitations are an important resource for quantum technologies based on bosonic oscillator modes. However, most electromagnetic and mechanical nonlinearities arising from intrinsic material properties are far too weak compared to dissipation in the system to allow for nonlinear effects to be observed on the single-quantum level. To overcome this limitation, electromagnetic resonators in both the optical and microwave frequency regimes have been coupled to other strongly nonlinear quantum systems such as atoms and superconducting qubits, allowing for the demonstration of effects such as photon blockade and coherent quantum protocols using the Kerr effect. Here, we demonstrate the realization of the single-phonon nonlinear regime in a solid-state mechanical system. The single-phonon anharmonicity in our system exceeds the decoherence rate by a factor of 6.8, allowing us to use the lowest two energy levels of the resonator as a mechanical qubit, for which we show initialization, readout, and a complete set of direct single qubit gates. Our work adds another unique capability to a powerful quantum acoustics platform for quantum simulations, sensing, and information processing.

quant-ph↗

arXiv2024

The effect of niobium thin film structure on losses in superconducting circuits

The performance of superconducting microwave circuits is strongly influenced by the material properties of the superconducting film and substrate. While progress has been made in understanding the importance of surface preparation and the effect of surface oxides, the complex effect of superconductor film structure on microwave losses is not yet fully understood. In this study, we investigate the microwave properties of niobium resonators with different crystalline properties and related surface topographies. We analyze a series of magnetron sputtered films in which the Nb crystal orientation and surface topography are changed by varying the substrate temperatures between room temperature and 975 K. The lowest-loss resonators that we measure have quality factors of over one million at single-photon powers, among the best ever recorded using the Nb on sapphire platform. We observe the highest quality factors in films grown at an intermediate temperature regime of the growth series (550 K) where the films display both preferential ordering of the crystal domains and low surface roughness. Furthermore, we analyze the temperature-dependent behavior of our resonators to learn about how the quasiparticle density in the Nb film is affected by the niobium crystal structure and the presence of grain boundaries. Our results stress the connection between the crystal structure of superconducting films and the loss mechanisms suffered by the resonators and demonstrate that even a moderate change in temperature during thin film deposition can significantly affect the resulting quality factors.

quant-ph↗

arXiv2023

Quantum squeezing in a nonlinear mechanical oscillator

Mechanical degrees of freedom are natural candidates for continuous-variable quantum information processing and bosonic quantum simulations. These applications, however, require the engineering of squeezing and nonlinearities in the quantum regime. Here we demonstrate ground state squeezing of a gigahertz-frequency mechanical resonator coupled to a superconducting qubit. This is achieved by parametrically driving the qubit, which results in an effective two-phonon drive. In addition, we show that the resonator mode inherits a nonlinearity from the off-resonant coupling with the qubit, which can be tuned by controlling the detuning. We thus realize a mechanical squeezed Kerr oscillator, where we demonstrate the preparation of non-Gaussian quantum states of motion with Wigner function negativities and high quantum Fisher information. This shows that our results also have applications in quantum metrology and sensing.

quant-ph↗

arXiv2023

Quasiparticle dynamics in a superconducting qubit irradiated by a localized infrared source

A known source of decoherence in superconducting qubits is the presence of broken Cooper pairs, or quasiparticles. These can be generated by high-energy radiation, either present in the environment or purposefully introduced, as in the case of some hybrid quantum devices. Here, we systematically study the properties of a transmon qubit under illumination by focused infrared radiation with various powers, durations, and spatial locations. Despite the high energy of incident photons, our observations agree well with a model of low-energy quasiparticle dynamics dominated by trapping. This technique can be used for understanding and potentially mitigating the effects of high-energy radiation on superconducting circuits with a variety of geometries and materials.

quant-ph↗

arXiv2023

Engineering phonon-phonon interactions in multimode circuit quantum acousto-dynamics

In recent years, remarkable progress has been made towards encoding and processing quantum information in the large Hilbert space of bosonic modes. Mechanical resonators are of great interest for this purpose, since they confine many high quality factor modes into a small volume and can be easily integrated with many different quantum systems. An important yet challenging task is to create direct interactions between different mechanical modes. Here we demonstrate an in-situ tunable beam-splitter-type interaction between several mechanical modes of a high-overtone bulk acoustic wave resonator. The engineered interaction is mediated by a parametrically driven superconducting transmon qubit, and we show that it can be tailored to couple pairs or triplets of phononic modes. Furthermore, we use this interaction to demonstrate the Hong-Ou-Mandel effect between phonons. Our results lay the foundations for using phononic systems as quantum memories and platforms for quantum simulations.

quant-ph↗

arXiv2023

Macroscopic quantum test with bulk acoustic wave resonators

Recently, solid-state mechanical resonators have become a platform for demonstrating non-classical behavior of systems involving a truly macroscopic number of particles. Here, we perform the most macroscopic quantum test in a mechanical resonator to date, which probes the validity of quantum mechanics at the microgram mass scale. This is done by a direct measurement of the Wigner function of a high-overtone bulk acoustic wave resonator mode, monitoring the gradual decay of negativities over tens of microseconds. While the obtained macroscopicity of $μ= 11.3$ is on par with state-of-the-art atom interferometers, future improvements of mode geometry and coherence times could confirm the quantum superposition principle at unprecedented scales.

quant-ph↗

arXiv2023

Simultaneous Brillouin and piezoelectric coupling to a high-frequency bulk acoustic resonator

Bulk acoustic resonators support robust, long-lived mechanical modes, capable of coupling to various quantum systems. In separate works, such devices have achieved strong coupling to both superconducting qubits, via piezoelectricity, and optical cavities, via Brillouin interactions. In this work, we present a novel hybrid microwave/optical platform capable of coupling to bulk acoustic waves through cavity-enhanced piezoelectric and photoelastic interactions. The modular, tunable system achieves fully resonant and well-mode-matched interactions between a 3D microwave cavity, a high-frequency bulk acoustic resonator, and a Fabry Perot cavity. We realize this piezo-Brillouin interaction in x-cut quartz, demonstrating the potential for strong optomechanical interactions and high cooperativity using optical cavity enhancement. We further show how this device functions as a bidirectional electro-opto-mechanical transducer, with quantum efficiency exceeding $10^{-8}$, and a feasible path towards unity conversion efficiency. The high optical sensitivity and ability to apply large resonant microwave field in this system also offers a new tool for probing anomalous electromechanical couplings, which we demonstrate by investigating (nominally-centrosymmetric) CaF$_2$ and revealing a parasitic piezoelectricity of 83 am/V. Such studies are an important topic for emerging quantum technologies, and highlight the versatility of this new hybrid platform.

quant-ph↗

arXiv2023

Unified simulation methods for quantum acoustic devices

In circuit quantum acoustodynamics (cQAD), superconducting circuits are combined with acoustic resonators to create and control non-classical states of mechanical motion. Simulating these systems is challenging due to the extreme difference in scale between the microwave and mechanical wavelengths. All existing techniques simulate the electromagnetic and mechanical subsystems separately. However, this approach may not be adequate for all cQAD devices. Here, we demonstrate a single simulation of a superconducting qubit coupled to an acoustic and a microwave resonator and introduce two methods for using this simulation to predict the frequencies, coupling rates, and energy-participation ratios of the electromechanical modes of the hybrid system. We also discuss how these methods can be used to investigate important dissipation channels and quantify the nontrivial effects of mode hybridization in our device. Our methodology is flexible and can be extended to other acoustic resonators and quantum degrees of freedom, providing a valuable new tool for designing hybrid quantum systems.

quant-ph↗

arXiv2022

Schrödinger cat states of a 16-microgram mechanical oscillator

The superposition principle is one of the most fundamental principles of quantum mechanics. According to the Schrödinger equation, a physical system can be in any linear combination of its possible states. While the validity of this principle is routinely validated for microscopic systems, it is still unclear why we do not observe macroscopic objects to be in superpositions of states that can be distinguished by some classical property. Here we demonstrate the preparation of a mechanical resonator with an effective mass of 16.2 micrograms in Schrödinger cat states of motion, where the constituent atoms are in a superposition of oscillating with two opposite phases. We show control over the size and phase of the superposition and investigate the decoherence dynamics of these states. Apart from shedding light at the boundary between the quantum and the classical world, our results are of interest for quantum technologies, as they pave the way towards continuous-variable quantum information processing and quantum metrology with mechanical resonators.

quant-ph↗

arXiv2021

Parity measurement in the strong dispersive regime of circuit quantum acoustodynamics

Mechanical resonators are emerging as an important new platform for quantum science and technologies. A large number of proposals for using them to store, process, and transduce quantum information motivates the development of increasingly sophisticated techniques for controlling mechanical motion in the quantum regime. By interfacing mechanical resonators with superconducting circuits, circuit quantum acoustodynamics (cQAD) can make a variety of important tools available for manipulating and measuring motional quantum states. Here we demonstrate direct measurements of the phonon number distribution and parity of nonclassical mechanical states. We do this by operating our system in the strong dispersive regime, where a superconducting qubit can be used to spectroscopically resolve phonon Fock states. These measurements are some of the basic building blocks for constructing acoustic quantum memories and processors. Furthermore, our results open the door to performing even more complex quantum algorithms using mechanical systems, such as quantum error correction and multi-mode operations.

quant-ph↗

arXiv2020

A perspective on hybrid quantum opto- and electromechanical systems

Quantum opto- and electromechanical systems interface mechanical motion with the electromagnetic modes of optical resonators and microwave circuits. The capabilities and promise of these hybrid devices have been showcased through a variety of recent experimental advances that demonstrated exquisite control over the quantum state of solid-state mechanical objects. In this perspective, we offer an overview of the current state, as well as an outlook of the future directions, challenges, and opportunities for this growing field of research. We focus in particular on the prospects for ground state cooling of mechanical modes and their use in quantum circuits, transducers, and networks.

quant-ph↗