SearcharxivSearch

arXiv subjects

Yixiang Gan

Publications and source records attributed to Yixiang Gan.

At least 19 recordsLinked to original sources

Porosity Effects on Cyclic Gas Invasion and Trapping in Deformable Porous Media

Fluid transport in deformable porous media is central to many biophysical and geophysical processes. While extensive studies exist, how porosity governs fluid behaviour in deformable systems during cyclic injection remains elusive. Here, we investigate gas-liquid multiphase flow in a quasi-2D Hele-Shaw cell packed with soft hydrogel particles at different initial porosities. Alternative gas and water injection experiments, combined with high-resolution imaging and continuous pressure monitoring, are used to quantify gas dynamics and pressure evolution. Results show that the gas entry pressure increases as porosity decreases, consistent with a Young-Laplace estimation based on effective pore-throat width. After entry, invasion shifts from cavity-dominated expansion in high porosity packings to localised pore invasion in low porosity packings, with a mixed cavity-fingering regime at intermediate porosity. Pressure fluctuations are linked to pore-scale gas escape and internal gas redistribution. Low porosity packings produce frequent small-amplitude pressure drops, whereas higher porosity packings produce more discrete pressure relaxations. Across cycles, the decreasing mean pressure suggests preferential-pathway reuse and reduced local capillary constraints. Residual gas saturation increases systematically with injection cycles and reaches higher terminal values as porosity decreases. Specific interfacial length increases as available pore space decreases and follows a power-law relationship with gas cluster size, with scaling exponent decreases as porosity decreases and cycling progresses. Together, these results demonstrate that gas trapping in deformable porous media depends on both initial packing structure and cyclically evolving gas-solid interactions. This study provides insights for interpreting porosity-dependent trapping and reinvasion during repeated gas injection.

cond-mat.soft

Modelling wetting-bouncing transitions of droplet impact on random rough surfaces

Droplet impact on rough surfaces is of critical importance to various applications, yet remains incompletely understood. The present work aims to uncover droplet impact dynamics on random hydrophobic surfaces using volume of fluid simulations. Random fractal surfaces with RMS roughness ranging from 2 to 50 micrometers were generated using the Weierstrass-Mandelbrot function. Three identifiable impact outcomes including no bouncing, complete bouncing, and bouncing with breakup have been identified as Weber number varies between 5.7 and 12.9 and RMS roughness varies between 0 and 50 micrometers. We examine the spreading, retraction, re-spreading, and breakup stages of the impact events under different velocity and surface morphologies conditions. Numerical simulations show that the maximum spreading factor decreases linearly as surface roughness increases. Two scaling laws have been proposed for droplet impact on surfaces with small and large roughness values, respectively. A key finding is that the droplet contact time remains constant, independent of both Weber number and surface roughness. The joint effect of Weber number and surface roughness governs the wetting-bouncing transition, with larger roughness delaying the transition. This work elucidates the mechanisms governing droplet impact dynamics on random rough surfaces, thereby providing new insights directly relevant to droplet-based applications.

physics.flu-dyn

Measuring elastic properties of granular hydrogels: Effects of capillary interaction and ionic conditions

The elastic properties of granular hydrogels are commonly characterised under wet conditions, yet the influence of capillary interactions remains unclear. In practical applications, hydrogels operate in aqueous environments containing dissolved ionic species, where swelling and elastic behaviour depend sensitively on ionic conditions. In this study, an experimental setup is developed to measure elastic responses of granular hydrogels under wet conditions. This setup directly observes liquid bridges formation and its evolution during compression. Our results show that neglecting capillary contributions leads to a systematic underestimation of the Young's modulus of hydrogels. Such an underestimation due to the capillary interaction increases as the sample size or its intrinsic stiffness decreases. In addition to the swelling ratio, the tested samples were also prepared under controlled salinity levels. The experimentally observed dependence of stiffness on swelling and salinity conditions is well captured by a modified constitutive model. The development of this study offers a robust testing protocol for measuring elastic properties of hydrogels under various environmental conditions.

cond-mat.soft

Mesoscale Modelling of Confined Split-Hopkinson Pressure Bar Tests on Concrete: Effects of Internal Damage and Strain Rates

The dynamic strength of concrete under complex loading conditions is a key consideration in the design and maintenance of infrastructures. To assess this mechanical property, Split Hopkinson Pressure Bar (SHPB) tests are typically adopted across a wide range of loading and confining conditions. In this study, mesoscale modelling based on the finite element method (FEM) is employed to simulate SHPB tests on three-phase concrete with realistic aggregate shape, in order to investigate the effects of loading ramp rate, internal friction, and confining pressure on the dynamic increase factor (DIF). Microscopic evidence to explain these effects is explored through analysing the distributions of the internal strain rate and local damage. As key results, increasing loading ramp rates, internal friction, and confining pressure can generally leads to higher DIF values. Only a higher loading ramp rate significantly amplifies the strain-rate effect on the DIF, as evidenced by pronounced increases in both internal strain rate and damage in the mortar and aggregate phases. In contrast, higher internal friction and confining pressure weaken the strain-rate effect on the DIF. Both can be attributed to the mortar phase, which shows a less pronounced increase in damage with increasing strain rate. This study enriches the understanding of the dynamic fracture of concrete toward complex loading scenarios.

cond-mat.mtrl-sci

Nearly Complete Segregation of Submerged Grains in a Rotating Drum

Density-driven segregations, extensively studied in a simple rotating drum, are enriched with a wide range of underlying physics. Diverse symmetrical segregation patterns formed by mixing two types of dry mono-sized grains have been revealed due to variations in heavy and light grain densities, $\rho_h$ and $\rho_l$, and rotating speeds, $\omega$. We engender experimentally a nearly complete segregation, not occurring in dry conditions of the same $\rho_h$, $\rho_l$, and $\omega$, in submerged states. Further, based on the experiment-validated simulations, using coupled computational fluid dynamics and discrete element method, it is found the mixing index can be well predicted over a wide parameter space in the effective density ratio, $D=(\rho_h-\rho_f)/(\rho_l-\rho_f)$ with $\rho_f$ being the fluid density. Specifically, with increasing $D$ well-mixed states transit to fully-segregated states with a rising number of vortices and severer asymmetrical patterns. When the global Reynolds number $\mathrm{Re}_g$ is enlarged, the vortex area of heavy particles shrinks for lower $D$, while the area of light particles gradually saturates; meanwhile, for higher $D$ a new vortex with a continuously expanded area can be encountered in the light particle zone. These results improve our understanding of segregation transitions especially in submerged granular systems and shed new light on various science and engineering practices.

cond-mat.soft

On the Drag Coefficient Universality of a Rough Grain in Creeping Flow

Controversy exists regarding whether grain morphology reduces or enhances the drag of a single grain in creeping flows; further complication occurs when orientation dependence for aspherical grains comes into play. To quantify influences of shape irregularity and orientation, this study numerically investigates the drag in creeping flows for fractally rough grains depicted by Spherical Harmonics. As the grain surface becomes more angular with increasing relative roughness and fractal dimension, a stronger drag reduction is observed; this observed morphology-dependent reduction indicates Stokes formula is insufficient. The rotational dependence helps to explain the paradox wherein drag enhancement is always encountered insettling-grain experiments popular in geophysics. For the drag of a given rough grain at various orientations, extracted distributions of the overall drag, and its two components, i.e., skin friction and pressure drag, universally adhere to the Weibull patterns. Moreover, we identify a universal power law between drag coefficients and a newly proposed area-related number, sufficiently taking into consideration both grain roughness by surface area and orientational dependence by projected area perpendicular to the flow direction. This law is primarily controlled by relative roughness, with less sensitivity to fractal dimension. The determined expression enables precise estimation of fluid-particle interactions in upscaling simulations.

physics.flu-dyn

Observation of strain-rate softening behavior in jammed granular media

The strain-rate sensitivity of confined granular materials has been widely explored, with most findings exhibiting rate-strengthening behaviors. This study, however, reveals a distinct rate-softening behavior across a certain strain rate range based on triaxial tests on particle clusters of various materials with different surface properties, particle sizes, shapes, and stiffness. This softening effect is especially pronounced in the case of common rice particles. By examining the behavior of rice particles under different confining pressure and surface conditions, and directly measuring the frictional coefficient across various loading rates, we find that the reduction in surface frictional coefficient with the increasing strain rate predominantly contributes to this rate-softening behavior. This conclusion is validated by results from Finite Element Method (FEM) simulations. Additionally, we identify confining pressure as a critical factor regulating the normal stress between particles, and thereby enhancing frictional behavior. Rheometer tests reveal that the shear modulus exhibits a similar rate-softening trend. This study of rate-softening behavior in granular materials enhances our understanding of the mechanisms during their deformation under confining pressure. It also suggests that local inter-particle tribology significantly impacts overall granular behavior.

cond-mat.soft

Partially Saturated Granular Flow in a Rotating Drum: The Role of Cohesion

Partially saturated granular flows are common in various natural and industrial processes, such as landslides, mineral handling, and food processing. We conduct experiments and apply the Discrete Element Method (DEM) to study granular flows in rotating drums under partially saturated conditions. We focus on varying the strength of cohesion (surface tension) and rotation rate within the modes of rolling flow and cascading flow. With an increase in surface tension, a rolling mode can possess a steeper slope and correspondingly needs a higher rotation rate to transition to a cascading. The depth of the flowing region increases with increasing cohesion, while the sensitivity is reduced for cases of high cohesion. We propose a dimensionless number CE that captures the combined effects of rotation, gravity and cohesion on the dynamic angle of repose and flow depth. In addition, we extract statistical information on the formation of clusters within the flow. We find a power law relation between the cluster size distribution and its probability, which indicates that stronger cohesion can promote the formation of larger clusters, and we discuss how cohesion impact on flows manifested by cluster formation.

cond-mat.soft

Contact behaviour of simulated rough spheres generated with spherical harmonics

Normal contact behaviour between non adhesive fractal rough particles is studied using a finite element method (FEM). A series of spherical grain surfaces with distinguished roughness features are generated by means of Spherical Harmonics. These surfaces are described by two roughness descriptors, namely, relative roughness (Rr) and fractal dimension (FD). The contact behaviour of rough spheres with a rigid flat surface is simulated using FEM to quantify the influences of surface structure and sphere morphology by focusing on contact stiffness and true contact area. The dependence of normal contact stiffness (k) on applied normal force (F) is found to follow a power law over four orders of magnitude, with both alpha and beta being highly correlated with Rr and FD. With increasing load, the power exponent converges to that of Hertzian contact, e.g., 1/3, independent of Rr. Regions of true contact evolve through the formation of new microcontacts and their progressive merging, meanwhile the area distributions of contact island induced by various forces tend to obey similar Weibull distributions due to fractal nature in their surfaces. Contacts with larger values of Rr are found to produce contact contours with higher fractal dimension as calculated by a 2D box-counting method. Our results suggest that the correlation between radial lengths in a quasi spherical particle should be considered in studying contact behaviour.

cond-mat.mtrl-sci

An unexplored valley of binary packing: The loose jamming state

We present a theoretical prediction on random close packing factor ϕ_RCP^b of binary granular packings based on the hard-sphere fluid theory. An unexplored regime is unravelled, where the packing fraction ϕ_RCP^b is smaller than that of the mono-sized one ϕ_RCP^m, i.e., the so-called loose jamming state. This is against our common perception that binary packings should always reach a denser packing than mono-sized packings at the jamming state. Numerical evidence further supports this prediction and confirms the regime location in the size ratio and mole fraction (R_r-X_s) space, where the size ratio R_r is close to 1, and the mole fraction of the smaller sphere X_s close to 0. This extreme regime remains unreported in existing literature, yet significant for our fundamental understanding of binary packing systems.

cond-mat.soft

Shear-induced droplet mobility within porous surfaces

Droplet mobility under shear flows is important in a wide range of engineering applications, e.g., fog collection, and self-cleaning surfaces. For structured surfaces to achieve superhydrophobicity, the removal of stains adhered within the microscale surface features strongly determines the functional performance and durability. In this study, we numerically investigate the shear-induced mobility of the droplet trapped within porous surfaces. Through simulations covering a wide range of flow conditions and porous geometries, three droplet mobility modes are identified, i.e., the stick-slip, crossover, and slugging modes. To quantitatively characterise the droplet dynamics, we propose a droplet-scale capillary number that considers the driving force and capillary resistance. By comparing against the simulation results, the proposed dimensionless number presents a strong correlation with the leftover volume. The dominating mechanisms revealed in this study provide a basis for further research on enhancing surface cleaning and optimising design of anti-fouling surfaces.

physics.flu-dyn

Tailoring porous media for controllable capillary flow

Hypothesis Control of capillary flow through porous media has broad practical implications. However, achieving accurate and reliable control of such processes by tuning the pore size or by modification of interface wettability remains challenging. Here we propose that the flow of liquid by capillary penetration can be accurately adjusted by tuning the geometry of porous media and develop numerical method to achieve this. Methodologies On the basis of Darcys law, a general framework is proposed to facilitate the control of capillary flow in porous systems by tailoring the geometric shape of porous structures. A numerical simulation approach based on finite element method is also employed to validate the theoretical prediction. Findings A basic capillary component with a tunable velocity gradient is designed according to the proposed framework. By using the basic component, two functional capillary elements, namely, (i) flow amplifier and (ii) flow resistor, are demonstrated. Then, multi functional fluidic devices with controllable capillary flow are realized by integrating the designed capillary elements. All the theoretical designs are validated by numerical simulations. Finally, it is shown that the proposed model can be extended to three dimensional designs of porous media

physics.flu-dyn

Scalable Surface Area Characterization by Electrokinetic Analysis of Complex Anion Adsorption

By means of the in situ electrokinetic assessment of aqueous particles in conjunction with the addition of anionic adsorbates, we develop and examine a new approach to the scalable characterization of the specific accessible surface area of particles in water. For alumina powders of differing morphology in mildly acidic aqueous suspensions, the effective surface charge was modified by carboxylate anion adsorption through the incremental addition of oxalic and citric acids. The observed zeta potential variation as a function of the proportional reagent additive was found to exhibit inverse hyperbolic sine-type behavior predicted to arise from monolayer adsorption following the Grahame-Langmuir model. Through parameter optimization by inverse problem solving, the zeta potential shift with relative adsorbate addition revealed a nearly linear correlation of a defined surface-area-dependent parameter with the conventionally measured surface area values of the powders, demonstrating that the proposed analytical framework is applicable for the in situ surface area characterization of aqueous particulate matter. The investigated methods have advantages over some conventional surface analysis techniques owing to their direct applicability in aqueous environments at ambient temperature and the ability to modify analysis scales by variation of the adsorption cross section.

cond-mat.soft

Contact mechanics of fractal surfaces by spline assisted discretisation

We present a newly developed approach for the calculation of interfacial stiffness and contact area evolution between two rough bodies exhibiting self affine surface structures. Using spline assisted discretization to define localised contact normals and surface curvatures we interpret the mechanics of simulated non-adhesive elastic surface-profiles subjected to normal loading by examining discrete contact points as projected Hertzian spheres. The analysis of rough-to-rough contact mechanics for surface profiles exhibiting fractal structures, with fractal dimensions in the regime 1 2, reveals the significant effect of surface fractality on contact mechanics and compliance with surfaces having the same mean roughness but higher fractality showing lower contact stiffness in conditions of initial contact for a given load. The predicted linear development of true contact area with load was found to be consistent with diverse existing numerical and experimental studies. Results from this model demonstrate the applicability of the developed method for the meaningful contact analysis of hierarchical structures with implications for modelling tribological interactions between pairs of rough surfaces

cond-mat.soft

Static friction at fractal interfaces

Tribological phenomena are governed by combined effects of material properties, topology and surface-chemistry. We study the interplay of multiscale surface structures with molecular-scale interactions towards interpreting static frictional interactions at fractal interfaces. By spline-assisted-discretization we analyse asperity interactions in pairs of contacting fractal surface-profiles. For elastically deforming asperities, force analysis reveals greater friction at surfaces exhibiting higher fractality, with increasing molecular-scale friction amplifying this trend. Increasing adhesive strength yields higher overall friction at surfaces of lower fractality owing to greater true-contact-area. In systems where adhesive-type interactions play an important role, such as those where cold-welded junctions form, friction is minimised at an intermediate value of surface profile fractality found to be around 1.3 to 1.5. Results have implications for systems exhibiting evolving surface structures.

cond-mat.soft

Cyclic thermo-mechanical performance of granular beds: Effect of elastoplasticity

Understanding the coupled thermo-mechanical behaviour of compacted granular beds can benefit various industrial applications, such as pebble bed design in fusion reactors. In this study, a thermo-mechanical discrete element method based on our previous work is improved and adapted to investigate the cyclic thermo-mechanical performance of gas-filled granular materials composed of elastoplastic grains. An interparticle contact model is developed considering the plastic deformation of grains. Through the simulation on a representative volume element of beryllium pebble beds, we provide grain-scale insight into the evolution of thermal conductivity and stress. The simulation results suggest that the network of thermal contacts is impeded by plastic deformation leading to a significant drop of thermal conductivity during cooling. This effect can be suppressed by increasing the initial packing factor. Not limited to pebble bed design, the conclusion of this work can also pave the way for optimizing powder-based manufacturing and energy storage, where combined thermo-mechanical loading conditions and elastoplastic deformation of individual particles are involved.

cond-mat.soft

Tuning capillary flow in porous media with hierarchical structures

Immiscible fluid-fluid displacement in porous media is of great importance in many engineering applications, such as enhanced oil recovery, agricultural irrigation, and geologic CO2 storage. Fingering phenomena, induced by the interface instability, are commonly encountered during displacement processes and somehow detrimental since such hydrodynamic instabilities can significantly reduce displacement efficiency. In this study, we report a possible adjustment in pore geometry which aims to suppress the capillary fingering in porous media with hierarchical structures. Through pore-scale simulations and theoretical analysis, we demonstrate and quantify combined effects of wettability and hierarchical geometry on displacement patterns, showing a transition from fingering to compact mode. Our results suggest that with a higher porosity of the 2nd-order porous structure, the displacement can keep compact across a wider range of wettability conditions. Combined with our previous work on viscous fingering in such media, we can provide a complete insight into the fluid-fluid displacement control in hierarchical porous media, across a wide range of flow conditions from capillary- to viscous-dominated modes. The conclusions of this work can benefit the design of microfluidic devices, as well as tailoring porous media for better fluid displacement efficiency at the field scale.

physics.flu-dyn

Rupture of liquid bridges on porous tips: Competing mechanisms of spontaneous imbibition and stretching

Liquid bridges are commonly encountered in nature and the liquid transfer induced by their rupture are widely used in various industrial applications. In this work, with the focus on the porous tip, we studied the impacts of capillary effects on the liquid transfer induced by the rupture through numerical simulations. To depict the capillary effects of a porous tip, a time scale ratio, R_T, is proposed to compare the competing mechanisms of spontaneous imbibitiona and external drag. In terms of R_T, we then develop a theoretical model for estimating the liquid retention ratio considering the geometry, porosity and wettability of tips. The mecahnism presented in this work provides a possible approach to control the liquid transfer with better accuracy in microfluidics or microfabrications.

physics.flu-dyn