arXiv subjects

Yiyang Chen

Publications and source records attributed to Yiyang Chen.

At least 19 recordsLinked to original sources

arXiv2026

TacForcing: Streaming Action Generation with Execution-Time Tactile Feedback

Contact-rich manipulation requires adapting to contact states that can evolve substantially within an action horizon. However, chunk-based vision-language-action models predict complete action chunks from observations collected before execution, leaving tactile conditioning stale during execution. Existing tactile-reactive approaches typically rely on separate high-frequency controllers, which increase both architectural and training complexity. In this paper, we introduce TacForcing, a streaming action-generation framework that effectively incorporates execution-time tactile feedback. Instead of employing a separate reactive controller, TacForcing replaces the standard action expert with a streaming action expert to generate actions conditioned on the evolving tactile observations acquired during execution. TacForcing also introduces Execution-Aware Tactile Attention (EATA), which restricts tactile conditioning to actions nearing execution, thereby reducing the temporal mismatch between tactile acquisition and action execution. Across six simulated UniVTAC tasks and three real-world contact-rich manipulation tasks, TacForcing achieves average success rates of 65% and 69%, respectively, outperforming strong baselines in both settings.

cs.RO↗

arXiv2026

Listening makes Vision Clear for VLMs

Recent work typically assesses vision--language consistency using attention distributions of answer-side tokens. However, we observe that highest attention regions are not always consistent with the intended semantic token. This probably stems from decoding drift, where language priors from previously generated answer tokens accumulate and mismatch with visual attention. Besides the priors from previous answer tokens, we find that structural tokens, e.g., modality boundary markers, may encompass the entire context and generate high attention to areas unrelated to the target. To avoid these distortions and provide consistency evaluation for large VLMs, we adopt prompt-side semantics and propose Prompt-Vision Token Activation Map (PV-TAM). PV-TAM further incorporates a filter to remove systematic bias induced by modality boundary markers. Unlike traditional methods that evaluate overlap solely through masks while ignoring activation intensity, our metrics leverage the peak distribution of attention to measure the alignment between prompts and visual regions. In experiments, PV-TAM consistently improves both attention-based and IoU-style localization metrics over answer-side baselines on various datasets.

cs.CV↗

arXiv2026

World-Language-Action Model for Unified World Modeling, Language Reasoning, and Action Synthesis

We propose world-language-action (WLA) models as a new class of embodied foundation models. WLA takes textual instructions, images, and robot states as inputs to jointly predict textual subtasks, subgoal images, and robot actions, conjoining the \emph{world modeling interface} to learn from extensive egocentric videos as in the world-action model (WAM) and the \emph{language reasoning} capacities to solve complex long-horizon tasks as in vision-language-action (VLA) models. At the core of WLA lies an \emph{autoregressive (AR)} Transformer backbone, instead of a bidirectional diffusion Transformer as in WAMs, to predict the \emph{next state}, comprising the \emph{semantic-level} textual intention and complementary \emph{fine-grained} physical dynamics. The physical dynamics are supervised by the world modeling objective based on a dedicated World Expert, and are leveraged to ease the characterization of the state-action correlation for the Action Expert. WLA leverages meta-queries to make the world prediction \emph{implicitly} impact the action generation so that the former can be disabled during inference. The world prediction can also be activated to enable test-time scaling for improved robot control. Our WLA-0 prototype, with 2B active parameters, achieves 40 ms per inference on an NVIDIA RTX 5090. Evaluations across simulated and real-world environments demonstrate that WLA-0 achieves state-of-the-art multi-task and long-horizon learning abilities, e.g., 92.94\% success rate on RoboTwin2.0 Clean and 56.5\% success rate on RMBench. WLA-0 also holds the promise to learn novel tasks directly from \emph{cross-embodiment robot videos} without action annotations.

cs.RO↗

arXiv2026

Coherent Dark State Formation of a Lead-Vacancy Spin Qubit in Diamond

A lead-vacancy (PbV) center in diamond exhibits coherent emission above the liquid helium temperature, making it highly attractive for quantum network applications. Here, we report the magneto-optical and spin properties of PbV centers in diamond. We record a spin lifetime of 12 ms at 7.5 K under large off-axis magnetic field. Furthermore, we observe formation of the coherent dark state by coherent population trapping and estimate a spin dephasing time of 177 ns at 6.5 K. This work demonstrates the outstanding thermal robustness of the PbV spin compared to other group-IV centers above 4 K.

quant-ph↗

arXiv2026

SmartPoC: Generating Executable and Validated PoCs for Smart Contract Bug Reports

Smart contracts are commonly audited through static analysis to explore vulnerabilities. However, static approaches typically produce heterogeneous findings rather than reproducible, executable proof-of-concept (PoC) test cases, leading to costly and ad hoc manual validation. Large language models (LLMs) offer a promising way to translate audit reports into PoC test cases, but face three major challenges: noisy inputs, lack of execution grounding, and missing runtime oracles. We present SmartPoC, an end-to-end approach for validating reported vulnerabilities in audit reports by generating and executing PoC test cases with automated exploitability verification. SmartPoC first extracts a focused function-level slice from each report to reduce noise, centering on the key functions referenced in a finding and augmenting them with execution-relevant neighbors. To improve executability, we wrap LLM-based PoC synthesis in a generate-repair-execute loop, combining deterministic pre-execution sanitization with feedback-driven post-execution debugging. We further use differential verification as an oracle to confirm the exploitability of generated test cases. On the SmartBugs-Vul and FORGE-Vul benchmarks, SmartPoC achieves confirmation precision of 98.32% and 98.65%, with recall of 84.17% and 85.28%, respectively. On a recent Etherscan verified-source corpus, SmartPoC confirms 64 bugs from 545 audit findings at an average cost of $0.03.

cs.SE↗

arXiv2026

SACRED: A Faithful Annotated Multimedia Multimodal Multilingual Dataset for Classifying Connectedness Types in Online Spirituality

In religion and theology studies, spirituality has garnered significant research attention for the reason that it not only transcends culture but offers unique experience to each individual. However, social scientists often rely on limited datasets, which are basically unavailable online. In this study, we collaborated with social scientists to develop a high-quality multimedia multi-modal datasets, \textbf{SACRED}, in which the faithfulness of classification is guaranteed. Using \textbf{SACRED}, we evaluated the performance of 13 popular LLMs as well as traditional rule-based and fine-tuned approaches. The result suggests DeepSeek-V3 model performs well in classifying such abstract concepts (i.e., 79.19\% accuracy in the Quora test set), and the GPT-4o-mini model surpassed the other models in the vision tasks (63.99\% F1 score). Purportedly, this is the first annotated multi-modal dataset from online spirituality communication. Our study also found a new type of connectedness which is valuable for communication science studies.

cs.CL↗

arXiv2026

Fusing Driver Perceived and Physical Risk for Safety Critical Scenario Screening in Autonomous Driving

Autonomous driving testing increasingly relies on mining safety critical scenarios from large scale naturalistic driving data, yet existing screening pipelines still depend on manual risk annotation and expensive frame by frame risk evaluation, resulting in low efficiency and weakly grounded risk quantification. To address this issue, we propose a driver risk fusion based hazardous scenario screening method for autonomous driving. During training, the method combines an improved Driver Risk Field with a dynamic cost model to generate high quality risk supervision signals, while during inference it directly predicts scenario level risk scores through fast forward passes, avoiding per frame risk computation and enabling efficient large scale ranking and retrieval. The improved Driver Risk Field introduces a new risk height function and a speed adaptive look ahead mechanism, and the dynamic cost model integrates kinetic energy, oriented bounding box constraints, and Gaussian kernel diffusion smoothing for more accurate interaction modeling. We further design a risk trajectory cross attention decoder to jointly decode risk and trajectories. Experiments on the INTERACTION and FLUID datasets show that the proposed method produces smoother and more discriminative risk estimates. On FLUID, it achieves an AUC of 0.792 and an AP of 0.825, outperforming PODAR by 9.1 percent and 5.1 percent, respectively, demonstrating its effectiveness for scalable risk labeling and hazardous scenario screening.

cs.RO↗

arXiv2026

A Deployable Bio-inspired Compliant Leg Design for Enhanced Leaping in Quadruped Robots

Quadruped robots are becoming increasingly essential for various applications, including industrial inspection and catastrophe search and rescue. These scenarios require robots to possess enhanced agility and obstacle-navigation skills. Nonetheless, the performance of current platforms is often constrained by insufficient peak motor power, limiting their ability to perform explosive jumps. To address this challenge, this paper proposes a bio-inspired method that emulates the energy-storage mechanism found in froghopper legs. We designed a Deployable Compliant Leg (DCL) utilizing a specialized 3D-printed elastic material, Polyether block amide (PEBA), featuring a lightweight internal lattice structure. This structure functions analogously to biological tendons, storing elastic energy during the robot's squatting phase and rapidly releasing it to augment motor output during the leap. The proposed mechanical design significantly enhances the robot's vertical jumping capability. Through finite element analysis (FEA) and experimental validation, we demonstrate a relative performance improvement of 17.1% in vertical jumping height.

cs.RO↗

arXiv2026

Mantis: A Versatile Vision-Language-Action Model with Disentangled Visual Foresight

Recent advances in Vision-Language-Action (VLA) models demonstrate that visual signals can effectively complement sparse action supervisions. However, letting VLA directly predict high-dimensional visual states can distribute model capacity and incur prohibitive training cost, while compressing visual states into more compact supervisory signals inevitably incurs information bottlenecks. Moreover, existing methods often suffer from poor comprehension and reasoning capabilities due to the neglect of language supervision. This paper introduces Mantis, a novel framework featuring a Disentangled Visual Foresight (DVF) to tackle these issues. Specifically, Mantis decouples visual foresight prediction from the backbone with the combination of meta queries and a diffusion Transformer (DiT) head. With the current visual state provided to the DiT via a residual connection, a simple next-state prediction objective enables the meta queries to automatically capture the latent actions that delineate the visual trajectory, and hence boost the learning of explicit actions. The disentanglement reduces the burden of the VLA backbone, enabling it to maintain comprehension and reasoning capabilities through language supervision. Empirically, pretrained on human manipulation videos, robot demonstrations, and image-text pairs, Mantis achieves a 96.7% success rate on LIBERO benchmark after fine-tuning, surpassing powerful baselines while exhibiting high convergence speed. Real-world evaluations show that Mantis outperforms $π_{0.5}$, a leading open-source VLA model, particularly in instruction-following capability, generalization to unseen instructions, and reasoning ability. Code and weights are released to support the open-source community.

cs.CV↗

arXiv2026

FLUID: A Fine-Grained Lightweight Urban Signalized-Intersection Dataset of Dense Conflict Trajectories

The trajectory data of traffic participants (TPs) is a fundamental resource for evaluating traffic conditions and optimizing policies, especially at urban intersections. Although data acquisition using drones is efficient, existing datasets still have limitations in scene representativeness, information richness, and data fidelity. This study introduces FLUID, comprising a fine-grained trajectory dataset that captures dense conflicts at typical urban signalized intersections, and a lightweight, full-pipeline framework for drone-based trajectory processing. FLUID covers three distinct intersection types, with approximately 5 hours of recording time and featuring over 20,000 TPs across 8 categories. Notably, the dataset records an average of 2.8 vehicle conflicts per minute across all scenes, with roughly 15% of all recorded motor vehicles directly involved in these conflicts. FLUID provides comprehensive data, including trajectories, traffic signals, maps, and raw videos. Comparison with the DataFromSky platform and ground-truth measurements validates its high spatio-temporal accuracy. Through a detailed classification of motor vehicle conflicts and violations, FLUID reveals a diversity of interactive behaviors, demonstrating its value for human preference mining, traffic behavior modeling, and autonomous driving research.

cs.RO↗

arXiv2026

SDialog: A Python Toolkit for End-to-End Agent Building, User Simulation, Dialog Generation, and Evaluation

We present SDialog, an MIT-licensed open-source Python toolkit that unifies dialog generation, evaluation and mechanistic interpretability into a single end-to-end framework for building and analyzing LLM-based conversational agents. Built around a standardized Dialog representation, SDialog provides: (1) persona-driven multi-agent simulation with composable orchestration for controlled, synthetic dialog generation, (2) comprehensive evaluation combining linguistic metrics, LLM-as-a-judge and functional correctness validators, (3) mechanistic interpretability tools for activation inspection and steering via feature ablation and induction, and (4) audio generation with full acoustic simulation including 3D room modeling and microphone effects. The toolkit integrates with all major LLM backends, enabling mixed-backend experiments under a unified API. By coupling generation, evaluation, and interpretability in a dialog-centric architecture, SDialog enables researchers to build, benchmark and understand conversational systems more systematically.

cs.CL↗

arXiv2026

Sampling Strategy Design for Model Predictive Path Integral Control on Legged Robot Locomotion

Model Predictive Path Integral (MPPI) control has emerged as a powerful sampling-based optimal control method for complex, nonlinear, and high-dimensional systems. However, directly applying MPPI to legged robotic systems presents several challenges. This paper systematically investigates the role of sampling strategy design within the MPPI framework for legged robot locomotion. Based upon the idea of structured control parameterization, we explore and compare multiple sampling strategies within the framework, including both unstructured and spline-based approaches. Through extensive simulations on a quadruped robot platform, we evaluate how different sampling strategies affect control smoothness, task performance, robustness, and sample efficiency. The results provide new insights into the practical implications of sampling design for deploying MPPI on complex legged systems.

eess.SY↗

arXiv2025

LibContinual: A Comprehensive Library towards Realistic Continual Learning

A fundamental challenge in Continual Learning (CL) is catastrophic forgetting, where adapting to new tasks degrades the performance on previous ones. While the field has evolved with diverse methods, this rapid surge in diverse methodologies has culminated in a fragmented research landscape. The lack of a unified framework, including inconsistent implementations, conflicting dependencies, and varying evaluation protocols, makes fair comparison and reproducible research increasingly difficult. To address this challenge, we propose LibContinual, a comprehensive and reproducible library designed to serve as a foundational platform for realistic CL. Built upon a high-cohesion, low-coupling modular architecture, LibContinual integrates 19 representative algorithms across five major methodological categories, providing a standardized execution environment. Meanwhile, leveraging this unified framework, we systematically identify and investigate three implicit assumptions prevalent in mainstream evaluation: (1) offline data accessibility, (2) unregulated memory resources, and (3) intra-task semantic homogeneity. We argue that these assumptions often overestimate the real-world applicability of CL methods. Through our comprehensive analysis using strict online CL settings, a novel unified memory budget protocol, and a proposed category-randomized setting, we reveal significant performance drops in many representative CL methods when subjected to these real-world constraints. Our study underscores the necessity of resource-aware and semantically robust CL strategies, and offers LibContinual as a foundational toolkit for future research in realistic continual learning. The source code is available from \href{https://github.com/RL-VIG/LibContinual}{https://github.com/RL-VIG/LibContinual}.

cs.LG↗

arXiv2025

SDialog: A Python Toolkit for End-to-End Agent Building, User Simulation, Dialog Generation, and Evaluation

We present SDialog, an MIT-licensed open-source Python toolkit that unifies dialog generation, evaluation and mechanistic interpretability into a single end-to-end framework for building and analyzing LLM-based conversational agents. Built around a standardized \texttt{Dialog} representation, SDialog provides: (1) persona-driven multi-agent simulation with composable orchestration for controlled, synthetic dialog generation, (2) comprehensive evaluation combining linguistic metrics, LLM-as-a-judge and functional correctness validators, (3) mechanistic interpretability tools for activation inspection and steering via feature ablation and induction, and (4) audio generation with full acoustic simulation including 3D room modeling and microphone effects. The toolkit integrates with all major LLM backends, enabling mixed-backend experiments under a unified API. By coupling generation, evaluation, and interpretability in a dialog-centric architecture, SDialog enables researchers to build, benchmark and understand conversational systems more systematically.

cs.AI↗

arXiv2025

ContextFlow: Training-Free Video Object Editing via Adaptive Context Enrichment

Training-free video object editing aims to achieve precise object-level manipulation, including object insertion, swapping, and deletion. However, it faces significant challenges in maintaining fidelity and temporal consistency. Existing methods, often designed for U-Net architectures, suffer from two primary limitations: inaccurate inversion due to first-order solvers, and contextual conflicts caused by crude "hard" feature replacement. These issues are more challenging in Diffusion Transformers (DiTs), where the unsuitability of prior layer-selection heuristics makes effective guidance challenging. To address these limitations, we introduce ContextFlow, a novel training-free framework for DiT-based video object editing. In detail, we first employ a high-order Rectified Flow solver to establish a robust editing foundation. The core of our framework is Adaptive Context Enrichment (for specifying what to edit), a mechanism that addresses contextual conflicts. Instead of replacing features, it enriches the self-attention context by concatenating Key-Value pairs from parallel reconstruction and editing paths, empowering the model to dynamically fuse information. Additionally, to determine where to apply this enrichment (for specifying where to edit), we propose a systematic, data-driven analysis to identify task-specific vital layers. Based on a novel Guidance Responsiveness Metric, our method pinpoints the most influential DiT blocks for different tasks (e.g., insertion, swapping), enabling targeted and highly effective guidance. Extensive experiments show that ContextFlow significantly outperforms existing training-free methods and even surpasses several state-of-the-art training-based approaches, delivering temporally coherent, high-fidelity results.

cs.CV↗

arXiv2025

Optical charge state manipulation of lead-vacancy centers in diamond

Group-IV vacancy centers in diamond exhibit excellent optical and spin coherence properties, making them highly promising and scalable spin qubit candidates. Since only specific charge states are magneto-optically active, control over the charge state is fundamental for quantum applications. Here, we realize the charge state control of lead-vacancy centers (PbV) through multi-color laser irradiation. We achieve tunable population manipulation of the negatively charged state from 0 to 89%, paving the way for spin control of the negatively charged PbV center. Furthermore, through analysis of charge state dynamics, we propose a charge cycle between the neutral and negatively charged states, indicating a possible pathway to the neutral PbV center with a spin-1 system.

quant-ph↗

arXiv2025

Latency Minimization for Multi-AAV-Enabled ISCC Systems with Movable Antenna

This paper investigates an autonomous aerial vehicle (AAV)-enabled integrated sensing, communication, and computation system, with a particular focus on integrating movable antennas (MAs) into the system for enhancing overall system performance. Specifically, multiple MA-enabled AVVs perform sensing tasks and simultaneously transmit the generated computational tasks to the base station for processing. To minimize the maximum latency under the sensing and resource constraints, we formulate an optimization problem that jointly coordinates the position of the MAs, the computation resource allocation, and the transmit beamforming. Due to the non-convexity of the objective function and strong coupling among variables, we propose a two-layer iterative algorithm leveraging particle swarm optimization and convex optimization to address it. The simulation results demonstrate that the proposed scheme achieves significant latency improvements compared to the baseline schemes.

cs.IT↗

arXiv2025

Full-Duplex Integrated Sensing, Communication, and Computation over Low-Altitude Wireless Networks

With low-altitude economies emerging as a pivotal sector, this study explores an integrated sensing, communication, and computation system over low-altitude wireless networks. A full-duplex autonomous aerial vehicle (AAV) operates as an AAV-enabled low-altitude platform (ALAP), concurrently executing data transmission, target sensing, and mobile edge computing services. To minimize systemic energy consumption under sensing beampattern constraints and computational demands, we formulate an optimization problem coordinating task allocation, computation resource allocation, and transmit/receive beamforming. Given the non-convexity and highly variable coupling, an efficient iterative convex approximation framework based on alternating optimization decomposes the problem into tractable subproblems. Moreover, the convergence and computational complexity of the proposed algorithm are rigorously analyzed. Simulations verify up to 54.12\% energy savings versus benchmarks.

eess.SP↗