arXiv subjects

Yiyang Gong

Publications and source records attributed to Yiyang Gong.

13 recordsLinked to original sources

arXiv2026

Reconfigurable ultrafast perovskite polariton logic gates via nonlinear dynamics

Exciton-polaritons provide a great platform for developing ultrafast all-optical logic gates for quantum and optical chips. However, progress toward practical polariton logic remains limited due to incomplete logical functionality on a single device. Herein, we present a single-device perovskite polariton platform enabling reconfigurable, ultrafast logic gates with functional completeness. The device consists of an optically trapped perovskite microwire, generating well-controlled non-equilibrium polariton condensation states for multiple logic operation channels. By tailoring the power of signal and gate beams, the same device is programmed to execute three basic Boolean functions (AND,OR,and NOT) and a high-order XOR function with a high on/off ratio of 21 dB, and a fast response time 6.7 ps. The reconfigurability arises from the selective activation of different nonlinear responses of polariton condensates, including amplification, seeding state transitions, and nonlinear interaction. These results provide valuable insights for advancing exciton-polariton logic gates.

physics.optics↗

arXiv2025

Ultrafast Exciton-Polariton Transport and Relaxation in Halide Perovskite

Halide perovskites offer a great platform for room-temperature exciton-polaritons (EPs) due to their strong oscillator strength and large exciton binding energy, promising applications in next-generation photonic and polaritonic devices. Efficient manipulation of EP transport and relaxation is critical for device performance, yet their spatiotemporal dynamics across different in-plane momenta (k//) remain poorly understood due to limitations in experimental access. In this work, we employ energy-resolved transient reflectance microscopy (TRM) combined with the dispersion relation of EPs to achieve high-resolution imaging of EP transport at specific k//. This approach directly reveals the quasi-ballistic transport and ultrafast relaxation of EPs in different k// regions, showcasing diffusion as fast as ~490 cm2/s and a relaxation time of ~95.1 fs. Furthermore, by tuning the detuning parameter, we manipulate the ballistic transport group velocity and relaxation time of EPs across varying k//. Our results reveal key insights into the dynamics of EP transport and relaxation, providing valuable guidance for the design and optimization of polaritonic devices.

cond-mat.mtrl-sci↗

arXiv2025

All-optical and ultrafast control of high-order exciton-polariton orbital modes

Exciton-polaritons flows within closed quantum circuits can spontaneously form phase-locked modes that carry orbital angular momentum (OAM). With its infinite set of angular momentum quantum numbers, high-order OAM represents a transformative solution to the bandwidth bottleneck in multiplexed optical communication. However, its practical application is hindered by the limited choice of materials which in general requires cryogenic temperatures and the reliance on mechanical switching. In this work, we achieve stable and high-order (up to order of 33) OAM modes by constructing a closed quantum circuit using the halide perovskite microcavities at room temperature. By controlling the spatial and temporal symmetry of the closed quantum circuits using another laser pulse, we achieve significant tuning OAM of EP flows from 8 to 12. Our work demonstrate all-optical and ultrafast control of high-order OAM using exciton-polariton condensates in perovskite microcavities that would have important applications in high-throughput optical communications.

physics.optics↗

arXiv2010

Phonon Mediated Off-Resonant Quantum Dot-Cavity Coupling

A theoretical model for the phonon-mediated off-resonant coupling between a quantum dot and a cavity, under resonant excitation of the quantum dot, is presented. We show that the coupling is caused by electron-phonon interaction in the quantum dot and is enhanced by the cavity. We analyze recently observed resonant quantum dot spectroscopic data by our theoretical model.

cond-mat.mes-hall↗

arXiv2010

Low Power Resonant Optical Excitation of an Optomechanical Cavity

We demonstrate the actuation of a double beam opto-mechanical cavity with a sinusoidally varying optical input power. We observe the driven mechanical motion with only 200 nW coupled to the optical cavity mode. We also investigate the pump power dependence of the radio-frequency response for both the driving power and the probe power. Finally, we investigate the dependence of the amplitude of the mechanical motion on mechanical cavity quality factor.

physics.optics↗

arXiv2010

Observation of Transparency of Erbium-doped Silicon nitride in photonic crystal nanobeam cavities

One-dimensional nanobeam photonic crystal cavities are fabricated in an Er-doped amorphous silicon nitride layer. Photoluminescence from the cavities around 1.54 um is studied at cryogenic and room temperatures at different optical pump powers. The resonators demonstrate Purcell enhanced absorption and emission rates, also confirmed by time-resolved measurements. Resonances exhibit linewidth narrowing with pump power, signifying absorption bleaching and the onset of stimulated emission in the material at both 5.5 K and room temperature. We estimate from the cavity linewidths that Er has been pumped to transparency at the cavity resonance wavelength.

physics.optics↗

arXiv2010

Nanobeam photonic crystal cavity quantum dot laser

The lasing behavior of one dimensional GaAs nanobeam cavities with embedded InAs quantum dots is studied at room temperature. Lasing is observed throughout the quantum dot PL spectrum, and the wavelength dependence of the threshold is calculated. We study the cavity lasers under both 780 nm and 980 nm pump, finding thresholds as low as 0.3 uW and 19 uW for the two pump wavelengths, respectively. Finally, the nanobeam cavity laser wavelengths are tuned by up to 7 nm by employing a fiber taper in near proximity to the cavities. The fiber taper is used both to efficiently pump the cavity and collect the cavity emission.

physics.optics↗

arXiv2010

Photoluminescence from silicon dioxide photonic crystal cavities with embedded silicon nanocrystals

One dimensional nanobeam photonic crystal cavities are fabricated in silicon dioxide with silicon nanocrystals. Quality factors of over 9 x 10^3 are found in experiment, matching theoretical predictions, with mode volumes of 1.5(lambda/n)^3 . Photoluminescence from the cavity modes is observed in the visible wavelength range 600-820 nm. Studies of the lossy characteristics of the cavities are conducted at varying temperatures and pump powers. Free carrier absorption effects are found to be significant at pump powers as low as a few hundred nanowatts.

physics.optics↗

arXiv2010

Coupled fiber taper extraction of 1.53 um photoluminescence from erbium doped silicon nitride photonic crystal cavities

Optical fiber tapers are used to collect photoluminescence emission at ~1.5 um from photonic crystal cavities fabricated in erbium doped silicon nitride on silicon. Photoluminescence collection via fiber taper is enhanced 2.5 times relative to free space, with a total taper collection efficiency of 53%. By varying the fiber taper offset from the cavity, a broad tuning range of coupling strength is obtained. This material system combined with fiber taper collection is promising for building on-chip optical amplifiers.

physics.optics↗

arXiv2009

Photonic Crystal Cavities in Silicon Dioxide

One dimensional nano-beam photonic crystal cavities fabricated in silicon dioxide are considered in both simulation and experiment. Quality factors of over 10^4 are found via simulation, while quality factors of over 5*10^3 are found in experiment, for cavities with mode volumes of 2.0 cubic wavelengths (in oxide) and in the visible wavelength range (600-716nm). The dependences of the cavity quality factor and mode volume for different design parameters are also considered.

physics.optics↗

arXiv2009

Enhanced Light Emission from Erbium Doped Silicon Nitride in Plasmonic Metal-Insulator-Metal Structures

Plasmonic gratings and nano-particle arrays in a metal-insulator-metal structures are fabricated on an erbium doped silicon nitride layer. This material system enables simple fabrication of the structure, since the active nitride layer can be directly grown on metal. Enhancement of collected emission of up to 12 is observed on resonance, while broad off-resonant enhancement is also present. The output polarization behavior of the gratings and nano-particle arrays is investigated and matched to plasmonic resonances, and the behavior of coupled modes as a function of inter-particle distance is also discussed.

physics.optics↗

arXiv2008

Plasmonic Enhancement of Emission from Si-nanocrystals

Plasmonic gratings of different periodicities are fabricated on top of Silicon nanocrystals embedded in Silicon Dioxide. Purcell enhancements of up to 2 were observed, which matches the value from simulations. Plasmonic enhancements are observed for the first three orders of the plasmonic modes, with the peak enhancement wavelength varying with the periodicity. Biharmonic gratings are also fabricated to extract the enhanced emission from the first order plasmonic mode, resulting in enhancements with quality factors of up to 16.

physics.optics↗

arXiv2006

Design of Plasmon Cavities for Solid-State Cavity QED Applications

Research on photonic cavities with low mode volume and high quality factor garners much attention because of applications ranging from optoelectronics to cavity quantum electrodynamics (QED). We propose a cavity based on surface plasmon modes confined by metallic distributed Bragg reflectors. We analyze the structure with Finite Difference Time Domain simulations and obtain modes with quality factor 1000 (including losses from metals), reduced mode volume relative to photonic crystal cavities, Purcell enhancements of hundreds, and even the capability of enabling cavity QED strong coupling.

quant-ph↗