SearcharxivSearch

arXiv subjects

Yizhar Or

Publications and source records attributed to Yizhar Or.

At least 19 recordsLinked to original sources

Dynamics-Informed Reinforcement Learning for Agile and Energy-Efficient Locomotion of a Monopedal Hopping Quadcopter

Although aerial-legged robots offer combined agility and efficiency, controlling high-speed hopping under complex hybrid dynamics is challenging. Reinforcement Learning (RL) is promising but prone to energy-inefficient "reward hacking". We propose a Dynamics-Informed RL framework for a monopedal hopping quadcopter. By embedding a target Specific Energy into the reward, we constrain the optimization to a physically viable energy manifold, ensuring stable hopping behaviour. By rewarding the phase-consistent behavior, it can encourage bio-inspired stance-phase impulse. Furthermore, penalizing the electro-mechanical power waste induces the motors generate an efficient impulse. This enables the policy to inject energy strictly during spring restitution without heuristic state machines. MuJoCo simulations validate robust height regulation and forward velocity tracking up to 2.0 m/s despite severe attitude-contact coupling. Ultimately, our approach yields a highly agile hopping gait, reducing energy consumption by 82% and 73% compared to hovering baselines and inefficiency baseline, respectively.

cs.RO

Learning to Exploit Passive Dynamics for Energy-Efficient Target Hopping of a Spring-Legged Quadcopter

Combining aerial thrust with spring-loaded hopping makes monopedal quadcopters promising for locomotion over complex terrain, but heuristic proportional-integral-derivative (PID) tuning limits coordination between active thrust and passive contact dynamics. We present a direct estimated-state-to-motor Proximal Policy Optimization (PPO) policy that commands four motors without an explicit hopping state machine or low-level attitude PID. Its reward combines Energy-Manifold Shaping for mass-normalized vertical-energy tracking and apex-state anchoring with Efficiency Shaping, which uses a history-aware power estimator to penalize general power use, impose an additional airborne-power cost, and penalize airborne near-stationarity. In representative hardware runs, the PPO-based control stack reduced cycle-averaged measured electrical power by 30.7% and mean total normalized thrust by 49.8% relative to the tuned PID-based control stack, while retaining repeatable commanded-height hopping and more concentrated landings. These observations are consistent with improved use of passive dynamics and reduced measured electrical demand.

cs.RO

Optimal control of a swimming robot based on Purcell's microswimmer model

Purcell's swimmer is a well-known planar model of a swimming microorganism, governed by low Reynolds number hydrodynamics, which is comprised of three rigid links connected by actuated rotary joints. This model has been analyzed as a robotic locomotion system governed by first-order nonlinear dynamics with a periodic input (gait) of the two joint angles. In this work, we present a robotic macro-scale realization of this three-link swimmer moving in a highly viscous fluid. We propose a simple variant of Purcell's theoretical model with non-slender links and a central rigid sphere which represents the added drag of the robot's central flotation block, and calibrate the model's parameters to fit experimental measurements. Next, we apply optimal control formulation based on Pontryagin's Maximum Principle (PMP) in order to find optimal gaits that maximize the displacement per cycle under bounds on the joint angles. Employing a differential geometric method that transforms the problem to area integral enclosed by the gait trajectory in the plane of joint angles, enables visual interpretation which explains topological changes in displacement-optimal gaits upon varying the bound on the joint angles. We then apply PMP formulation to the problem of maximizing Lighthill's energy efficiency in order to obtain a boundary value problem (BVP) whose solution gives efficiency-optimal gaits for Purcell's swimmer model, as well as its variant with a central sphere. Finally, we utilize numerical methods such as parameterizing the input gait as a truncated Fourier series, as well as GPOPS-II solver, to produce sufficient initial guess values for solving the BVPs and obtaining efficiency-optimal gaits.

physics.flu-dyn

Analysis and experiments of the dissipative Twistcar: direction reversal and asymptotic approximations

Underactuated wheeled vehicles are commonly studied as nonholonomic systems with periodic actuation. Twistcar is a classical example inspired by a riding toy, which has been analyzed using a planar model of a dynamical system with nonholonomic constraints. Most of the previous analyses did not account for energy dissipation due to frictional resistance. In this work, we study a theoretical two-link model of the Twistcar while incorporating dissipation due to rolling resistance. We obtain asymptotic expressions for the system's small-amplitude steady-state periodic dynamics, which reveals the possibility of reversing the direction of motion upon varying the geometric and mass properties of the vehicle. Next, we design and construct a robotic prototype of the Twistcar whose center-of-mass position can be shifted by adding and removing a massive block, enabling experimental demonstration of the Twistcar's direction reversal phenomenon. We also conduct parameter fitting for the frictional resistance in order to improve agreement with experiments.

cs.RO

Dynamics, stability, and energy efficiency of an energy-recycling rimless wheel with spring-clutch legs

This paper proposes an energy-recycling rimless wheel with spring-clutch legs. The proposed mechanism uses a lockable clutch to store part of the impact-induced elastic energy after foot contact and reinject it in the next gait cycle. First, we develop a hybrid dynamic model of the energy-recycling rimless wheel. Second, numerical simulations are used to examine the dynamics, local stability of periodic gaits, and the Cost of Transport (CoT) of the proposed mechanism. The simulation results show that the proposed mechanism reduces the CoT by up to 16.13% compared with a benchmark viscoelastic-legged rimless wheel with telescopic spring-damper legs. Compared with the rigid rimless wheel, the viscoelastic-legged and energy-recycling models reduce the CoT by more than 50%. The energy-recycling model also maintains locally stable periodic gaits over the tested slope and stiffness ranges. Finally, prototype experiments on an inclined plane are conducted to examine the feasibility of the proposed mechanism. The experimental results show that the proposed rimless wheel achieves passive walking on a shallow 1° slope, corresponding to a CoT of approximately 0.02. These results suggest that the proposed spring-clutch mechanism can improve the simulated walking efficiency of the energy-recycling rimless wheel, while the prototype experiments support the feasibility of passive walking with the mechanism.

cs.RO

Passive Vibration-Driven Locomotion

We investigate a concept of passive, vibration-driven locomotion, in which a mechanical system achieves horizontal self-propulsion by resonantly harvesting energy from vertical environmental excitations (e.g. ambient vibrations of underwater pipelines), without a direct propulsive actuation. The system consists of a capsule containing an internal pendulum attached to its base mounted on a vertically vibrating substrate. The underlying locomotion mechanism relies on resonant energy transfer from the vertically vibrating substrate to the internal oscillatory element. Under appropriate forcing conditions and in the presence of asymmetric dissipative interactions, this internal oscillator induces a net unidirectional motion of the capsule. The analysis focuses on regimes of progressive motion arising in the vicinity of parametric resonances. Two asymptotic limits are considered: small-amplitude parametric excitation leading to a (2:1) resonant oscillatory motion of the pendulum, and large-amplitude excitation leading to a (1:1) resonant unidirectional rotational motion of the pendulum. Given the asymmetry of the dissipative force acting on the capsule, both resonant regimes result in a progressive motion of the capsule system. To identify optimal locomotion regimes in both cases, we employ tailored asymptotic approaches based on multi-scale expansions and direct averaging analysis. The resulting slow-flow and averaged-flow models reveal the full bifurcation structure of steady-state solutions associated with forward capsule motion for both low- and high- amplitude excitations. Analytical predictions are shown to be in good agreement with direct numerical simulations of the full capsule-pendulum system.

math.DS

Spatial dynamics of flexible nano-swimmers under a rotating magnetic field

Micro-nano-robotic swimmers have promising potential for future biomedical tasks such as targeted drug delivery and minimally-invasive diagnosis. An efficient method for controlled actuation of such nano-swimmers is applying a rotating external magnetic field, resulting in helical corkscrew-like locomotion. In previous joint work, we presented fabrication and actuation of a simple magnetic nano-swimmer composed of two nano-rods connected by a short elastic hinge. Experiments under different actuation frequencies result in different motion regimes. At low frequencies, in-plane tumbling; at higher frequencies, moving forward in a spatial helical path in synchrony with the rotating magnetic field; in further frequency increase, asynchronous swimming is obtained. In this work, we present mathematical analysis of this nano-swimmer motion. We consider a simple two-link model and explicitly formulate and analyze its nonlinear dynamic equations, and reduce them to a simpler time-invariant system. For the first time, we obtain explicit analytic solutions of synchronous motion under simplifying assumptions, for both solutions of in-plane tumbling and spatial helical swimming. We conduct stability analysis of the solutions, presenting stability transitions and bifurcations for the different solution branches. Furthermore, we present analysis of the influence of additional effects, as well as parametric optimization of the swimmer's speed. The results of our theoretical study are essential for understanding the nonlinear dynamics of experimental magnetic nano-swimmers for biomedical applications, and conducting practical optimization of their performance.

physics.flu-dyn

Locomotion Dynamics of an Underactuated Three-Link Robotic Vehicle

The wheeled three-link snake robot is a well-known example of an underactuated system modelled using nonholonomic constraints, preventing lateral slippage (skid) of the wheels. A kinematically controlled configuration assumes that both joint angles are directly prescribed as phase-shifted periodic input. In another configuration of the robot, only one joint is periodically actuated while the second joint is passively governed by a visco-elastic torsion spring. In our work, we constructed the two configurations of the wheeled robot and conducted motion experiments under different actuation inputs. Analysis of the motion tracking measurements reveals a significant amount of wheels' skid, in contrast to the assumptions used in standard nonholonomic models. Therefore, we propose modified dynamic models which include wheels' skid and viscous friction forces, as well as rolling resistance. After parameter fitting, these dynamic models reach good agreement with the motion measurements, including effects of input's frequency on the mean speed and net displacement per period. This illustrates the importance of incorporating wheels' skid and friction into the system's model.

cs.RO

Sample Efficient Learning of Body-Environment Interaction of an Under-Actuated System

Geometric mechanics provides valuable insights into how biological and robotic systems use changes in shape to move by mechanically interacting with their environment. In high-friction environments it provides that the entire interaction is captured by the ``motility map''. Here we compare methods for learning the motility map from motion tracking data of a physical robot created specifically to test these methods by having under-actuated degrees of freedom and a hard to model interaction with its substrate. We compared four modeling approaches in terms of their ability to predict body velocity from shape change within the same gait, across gaits, and across speeds. Our results show a trade-off between simpler methods which are superior on small training datasets, and more sophisticated methods, which are superior when more training data is available.

cs.RO

Dynamics and multi-stability of a rotor-actuated Twistcar robot with passive steering joint

The nonlinear dynamics of many under-actuated wheeled platforms are governed by nonholonomic constraints of no-skid for passively rolling wheels, coupled with momentum balance. In most of theoretical models, the shape variables, i.e. joint angles, are directly prescribed as periodic inputs, such as steering angle of the Twistcar. In this work, we study a variant of the Twistcar model where the actuation input is periodic oscillations of an inertial rotor attached to the main body, while the steering joint is passively free to rotate. Remarkably, the dynamics of this model is extremely rich, and includes multiplicity of periodic solutions, both symmetric and asymmetric, as well as stability transitions and bifurcations. We conduct numerical simulations as well as asymptotic analysis of the vehicle's reduced equations of motion. We use perturbation expansion in order to obtain leading-order dynamics under symmetric periodic solution. Then, we utilize harmonic balance and further scaling assumptions in order to approximate the conditions for symmetry-breaking pitchfork bifurcation and stability transition of the symmetric periodic solution, as a function of actuation frequency and structural parameters. The asymptotic results show good agreement with numerical simulations. The results highlight the role of passive shape variables in generating multi-stable periodic solutions for nonholonomic systems of robotic locomotion.

cs.RO

Dynamics of Purcell-type microswimmers with active-elastic joints

Purcell's planar three-link microswimmer is a classic model of swimming in low-Reynolds-number fluid, inspired by motion of flagellated microorganisms. Many works analyzed this model, assuming that the two joint angles are directly prescribed in phase-shifted periodic inputs. In this work, we study a more realistic scenario by considering an extension of this model which accounts for joints' elasticity and mechanical actuation of periodic torques, so that the joint angles are dynamically evolving. Numerical analysis of the swimmer's dynamics reveals multiplicity of periodic solutions, depending on parameters of the inputs - frequency and amplitude of excitation, joints' stiffness ratio, as well as joint's activation. We numerically study swimming direction reversal, as well as bifurcations, stability transitions, and symmetry breaking of the periodic solutions, which represent the effect of buckling instability observed in swimming microorganisms. The results demonstrate that this variant of Purcell's simple model displays rich nonlinear dynamic behavior with actuated-elastic joints. Similar results are also obtained when studying an extended model of a six-link microswimmer.

physics.flu-dyn

Multistable Physical Neural Networks

Artificial neural networks (ANNs), which are inspired by the brain, are a central pillar in the ongoing breakthrough in artificial intelligence. In recent years, researchers have examined mechanical implementations of ANNs, denoted as Physical Neural Networks (PNNs). PNNs offer the opportunity to view common materials and physical phenomena as networks, and to associate computational power with them. In this work, we incorporated mechanical bistability into PNNs, enabling memory and a direct link between computation and physical action. To achieve this, we consider an interconnected network of bistable liquid-filled chambers. We first map all possible equilibrium configurations or steady states, and then examine their stability. Building on these maps, both global and local algorithms for training multistable PNNs are implemented. These algorithms enable us to systematically examine the network's capability to achieve stable output states and thus the network's ability to perform computational tasks. By incorporating PNNs and multistability, we can design structures that mechanically perform tasks typically associated with electronic neural networks, while directly obtaining physical actuation. The insights gained from our study pave the way for the implementation of intelligent structures in smart tech, metamaterials, medical devices, soft robotics, and other fields.

cs.NE

Geometric analysis of gaits and optimal control for three-link kinematic swimmers

Many robotic systems locomote using gaits - periodic changes of internal shape, whose mechanical interaction with the robot's environment generate characteristic net displacements. Prominent examples with two shape variables are the low Reynolds number 3-link "Purcell swimmer" with inputs of 2 joint angles and the "ideal fluid" swimmer. Gait analysis of these systems allows for intelligent decisions to be made about the swimmer's locomotive properties, increasing the potential for robotic autonomy. In this work, we present comparative analysis of gait optimization using two different methods. The first method is variational approach of "Pontryagin's maximum principle" (PMP) from optimal control theory. We apply PMP for several variants of 3-link swimmers, with and without incorporation of bounds on joint angles. The second method is differential-geometric analysis of the gaits based on curvature (total Lie bracket) of the local connection for 3-link swimmers. Using optimized body-motion coordinates, contour plots of the curvature in shape space give visualization that enables identifying distance-optimal gaits as zero level sets. Combining and comparing results of the two methods enables better understanding of changes in existence, shape and topology of distance-optimal gait trajectories, depending on the swimmers' parameters.

cs.RO

Nonlinear dynamics and bifurcations of a planar undulating magnetic microswimmer

Swimming micro-organisms such as flagellated bacteria and sperm cells have fascinating locomotion capabilities. Inspired by their natural motion, there is an ongoing effort to develop artificial robotic nano-swimmers for potential in-body biomedical applications. A leading method for actuation of nano-swimmers is by applying a time-varying external magnetic field. Such systems have rich and nonlinear dynamics that calls for simple fundamental models. A previous work studied forward motion of a simple two-link model with passive elastic joint, assuming small-amplitude planar oscillations of the magnetic field about a constant direction. In this work, we found that there exists a faster, backward motion of the swimmer with very rich dynamics. By relaxing the small-amplitude assumption, we analyze the multiplicity of periodic solutions, as well as their bifurcations, symmetry breaking, and stability transitions. We have also found that the net displacement and/or mean swimming speed are maximized for optimal choices of various parameters. Asymptotic calculations are performed for the bifurcation condition and the swimmer's mean speed. The results may enable significantly improving the design aspects of magnetically-actuated robotic microswimmer.

physics.flu-dyn

Lamb-type solution and properties of unsteady Stokes equations

We derive the general solution of the unsteady Stokes equations for an unbounded fluid in spherical polar coordinates, in both time and frequency domains. The solution is an expansion in vector spherical harmonics and given as a sum of a particular solution, proportional to pressure gradient exhibiting power-law spatial dependence, and a solution of vector Helmholtz equation decaying exponentially in far field, the decomposition originally introduced by Lamb. The solution can be applied to construct the transient exterior flow induced by an arbitrary velocity distribution at the spherical boundary, such as arising in the squirmer model of a microswimmer. It can be used to construct solutions for transient flows driven by initial conditions, unbounded flows driven by volume forces or disturbance to the unsteady flow due to a stationary spherical particle. The long-time behavior of solution is controlled by the flow component corresponding to average (or collective) motion of the boundary. This conclusion is illustrated by the study of decay of transversal wave in the presence of a fixed sphere. We further show that the general representation reduces to the well-known solutions for unsteady flow around a sphere undergoing oscillatory rigid-body (translation and rotation) motion. The proposed solution representation provides an explicit form of the velocity potential far from an oscillating body ("generalized" Darcy's law) and high- and low-frequency expansions. The leading-order high-frequency expansion yields the well-known ideal (inviscid) flow approximation, and the leading-order low-frequency expansion yields the steady Stokes equations. We derive the higher-order corrections to these approximations and discuss d'Alembert paradox. Continuation of the general solution to imaginary frequency yields the general solution of the Brinkman equations describing viscous flow in porous medium.

physics.flu-dyn

Dynamics of reconfigurable straw-like elements

In this paper, we discuss the dynamic modeling of fluid-filled straw-like elements consisting of serially interconnected elastic frusta with both axisymmetric and antisymmetric degrees of freedom, assuming planar motion. Under appropriate conditions each sub-structure has four stable equilibrium states. This gives the system under investigation the ability to remain stable in a large number of complex states, which is a vital ability for myriad of applications, including reconfigurable structures and soft robots. The theoretical model explains the dynamics of a single straw-like element in a discrete manner, considering inertial, damping, and gravitational effects, while taking into account the nonlinear elasticity of the elastic frusta, and assuming hydrostatic behavior of the entrapped fluid. After identifying the geometric and elastic parameters of the theoretical model based on relatively simple experiments, the model is validated compared to numerical simulations and experiments. The numerical simulations validate the theoretical elasticity of the elastic frusta, whereas the overall dynamic behavior of the system and the influence of unmodeled fluidic effects are examined experimentally. It is demonstrated both theoretically and empirically that straw-like elements cannot be adequately modeled using simple uniaxial deformations. In addition, the experimental validation indicates that the suggested model can accurately capture their overall dynamics.

physics.app-ph

Viscous flow-fields in hyperelastic Chambers

Viscous flows in hyperelastic chambers are relevant to many biological phenomena such as inhalation into the lung's acinar region and medical applications such as the inflation of a small chamber in minimally invasive procedures. In this work, we analytically study the viscous flow and elastic deformation created due to inflation of such spherical chambers from one or two inlets. Our investigation considers the shell's constitutive hyperelastic law coupled with the flow dynamics inside the chamber. For the case of a narrow tube filling a larger chamber, the pressure within the chamber involves a large spatially uniform part, and a small order correction. We derive a closed-form expression for the inflation dynamics, accounting for the effect of elastic bi-stability. Interestingly, the obtained pressure distribution shows that the maximal pressure on the chamber's surface is greater than the pressure at the entrance to the chamber. The calculated series solution of the velocity and pressure fields during inflation is verified by using a fully coupled finite element scheme, resulting in excellent agreement. Our results allow estimating the chamber's viscous resistance at different pressures, thus enabling us to model the process of inflation and deflation.

physics.flu-dyn

Fluid-driven traveling waves in soft robots

Many marine creatures, gastropods, and earthworms generate continuous traveling waves in their bodies for locomotion within marine environments, complex surfaces, and inside narrow gaps. In this work, we study theoretically and experimentally the use of embedded pneumatic networks as a mechanism to mimic nature and generate bi-directional traveling waves in soft robots. We apply long-wave approximation to theoretically calculate the required distribution of pneumatic network and inlet pressure oscillations needed to create desired moving wave patterns. We then fabricate soft robots with internal pneumatic network geometry based on these analytical results. The experimental results agree well with our model and demonstrate the propagation of moving waves in soft robots, along with locomotion capabilities. The presented results allow fabricating soft robots capable of continuous moving waves via the common approach of embedded pneumatic networks and requiring only two input controls.

cond-mat.soft